2021-06-01 |
Gerhard Sittig | scpi-dmm: model and MQ dependent delay when switching... |
tree | commitdiff |
2021-06-01 |
Gerhard Sittig | scpi-dmm: use different Agilent SCPI command for range... |
tree | commitdiff |
2021-06-01 |
Gerhard Sittig | scpi-dmm: rephrase read timeout decls, put "unit" after... |
tree | commitdiff |
2021-06-01 |
Gerhard Sittig | fluke-45: drop serial port echo test, was disabled... |
tree | commitdiff |
2021-06-01 |
Gerhard Sittig | hp-3457a: only probe when conn= was specified, to not... |
tree | commitdiff |
2021-06-01 |
Gerhard Sittig | scpi-pps: don't break SCPI devices when scanning for... |
tree | commitdiff |
2021-06-01 |
Gerhard Sittig | siglent-sds: move model dependent request emission... |
tree | commitdiff |
2021-06-01 |
Gerhard Sittig | hp-59306a: only match when conn= is given to avoid... |
tree | commitdiff |
2021-06-01 |
Gerhard Sittig | motech-lps-301: make better use of serial extract optio... |
tree | commitdiff |
2021-05-22 |
Gerhard Sittig | scpi-dmm: avoid get/set range calls for some of the... |
tree | commitdiff |
2021-05-22 |
Gerhard Sittig | scpi-dmm: add four-wire resistance to list of 34405A MQs |
tree | commitdiff |
2021-05-22 |
Gerhard Sittig | scpi-dmm: prepare introduction of per-MQ driver flags |
tree | commitdiff |
2021-05-22 |
Gerhard Sittig | scpi-dmm: add support to get/set range on Agilent proto... |
tree | commitdiff |
2021-05-22 |
Gerhard Sittig | scpi-dmm: use INIT instead of MEAS for Agilent to start... |
tree | commitdiff |
2021-05-22 |
Gerhard Sittig | scpi-dmm: Keysight 34465A is a 6.5 digit meter, bump... |
tree | commitdiff |
2021-05-22 |
Gerhard Sittig | scpi-dmm: move OPC availability check to after IDN... |
tree | commitdiff |
2021-05-22 |
Gerhard Sittig | siglent-sds: prefer common glib routine to get vector... |
tree | commitdiff |
2021-05-22 |
Gerhard Sittig | siglent-sds: free memory that was allocated by SCPI... |
tree | commitdiff |
2021-05-22 |
Gerhard Sittig | hameg-hmo: free memory that was allocated by SCPI get... |
tree | commitdiff |
2021-05-22 |
Gerhard Sittig | rigol-ds: free memory that was allocated by SCPI get... |
tree | commitdiff |
2021-05-22 |
Gerhard Sittig | scpi-dmm: free memory that was allocated by SCPI get... |
tree | commitdiff |
2021-05-22 |
Gerhard Sittig | rigol-dg: free memory that was allocated by SCPI get... |
tree | commitdiff |
2021-05-22 |
Gerhard Sittig | lecroy-xstream: free memory that was allocated by SCPI... |
tree | commitdiff |
2021-05-22 |
Gerhard Sittig | hp-3457a: style nits in the probe routine |
tree | commitdiff |
2021-05-22 |
Gerhard Sittig | hp-3457a: free memory that was allocated by SCPI get... |
tree | commitdiff |
2021-05-22 |
Gerhard Sittig | fluke-45: free memory that was allocated by SCPI get... |
tree | commitdiff |
2021-05-16 |
Rafael G. Martins | serial-dmm: Add PeakTech 2025 meter support. |
tree | commitdiff |
2021-05-09 |
Frank Stettner | rdtech-dps: Add missing devc initialisation. |
tree | commitdiff |
2021-04-25 |
Gerhard Sittig | rdtech-dps: research to reduce serial comm transfer... |
tree | commitdiff |
2021-04-25 |
Gerhard Sittig | rdtech-dps: introduce support for RD6006 and other... |
tree | commitdiff |
2021-04-25 |
Gerhard Sittig | rdtech-dps: layer separation between API and protocol... |
tree | commitdiff |
2021-04-25 |
Frank Stettner | hp-59306a: Initial HP 59306A driver. |
tree | commitdiff |
2021-04-24 |
Frank Stettner | hp-59306a: Initial driver skeleton. |
tree | commitdiff |
2021-03-16 |
Gerhard Sittig | kingst-la2016: address trivial style nits (whitespace... |
tree | commitdiff |
2021-03-16 |
Helge Kruse | kingst-la2016: Eliminate non-portable packed structs... |
tree | commitdiff |
2021-03-16 |
Helge Kruse | kingst-la2016: Use common code to send trigger and... |
tree | commitdiff |
2021-03-16 |
Helge Kruse | kingst-la2016: Upload firmware to correct USB configura... |
tree | commitdiff |
2021-03-16 |
Frank Stettner | korad-kaxxxxp: Add support for Korad KD3005P V2.1 |
tree | commitdiff |
2021-03-06 |
Petteri Aimonen | scpi-dmm: Add support for Owon XDM2041 |
tree | commitdiff |
2021-03-06 |
Petteri Aimonen | scpi-dmm: Gracefully handle meters that lack OPC command. |
tree | commitdiff |
2021-03-06 |
Petteri Aimonen | scpi-dmm: Add infinity limit to model-specific config. |
tree | commitdiff |
2021-02-28 |
Petteri Aimonen | scpi-pps: Add support for Owon P4000 series. |
tree | commitdiff |
2021-02-21 |
litospain | hantek-6xxx: Add ISDS205B support |
tree | commitdiff |
2021-02-21 |
waka | hantek-6xxx: Fix for channel coupling not updating... |
tree | commitdiff |
2021-02-21 |
Florian Ragwitz | zketech-ebd-usb: Don't ignore errors |
tree | commitdiff |
2021-02-21 |
Florian Ragwitz | beaglelogic: Fix resource leak |
tree | commitdiff |
2021-02-21 |
Alberto Scotta | hantek-dso: fix 100MS/s |
tree | commitdiff |
2021-02-21 |
HReimann | rigol-ds: Add DS1102Z-E model variant |
tree | commitdiff |
2021-02-21 |
Richard Allen | gwinstek-gpd: Fix voltage/current measurement |
tree | commitdiff |
2021-02-21 |
Richard Allen | gwinstek-gpd: Support auto-baud detection |
tree | commitdiff |
2021-02-21 |
Richard Allen | gwinstek-gpd: Retry device identification on failure |
tree | commitdiff |
2021-02-21 |
Richard Allen | gwinstek-gpd: Print serialcomm config |
tree | commitdiff |
2021-02-02 |
Gerhard Sittig | scpi-pps: add R&S HMP2000 model specs |
tree | commitdiff |
2021-02-02 |
Gerhard Sittig | scpi-pps: adjust R&S HMP4000 current resolution for... |
tree | commitdiff |
2021-01-06 |
v1ne | ols: Clean up: Replace hand-rolled byte order conversio... |
tree | commitdiff |
2021-01-06 |
v1ne | ols: Refactor: Extract trigger setup into private place |
tree | commitdiff |
2021-01-06 |
v1ne | ols: Make external clock setting queriable |
tree | commitdiff |
2021-01-06 |
v1ne | ols: Add option to use the falling edge of the external... |
tree | commitdiff |
2021-01-06 |
v1ne | ols: Clear "disabled groups" flags before setting them |
tree | commitdiff |
2021-01-06 |
v1ne | ols: Display actual expanded sample instead of the... |
tree | commitdiff |
2021-01-06 |
v1ne | ols: Clean up: Prefix private function for consistency |
tree | commitdiff |
2021-01-05 |
Peter Skarpetis | dmm/mm38xr: introduce DMM packet parser for Meterman... |
tree | commitdiff |
2021-01-05 |
Gerhard Sittig | serial-dmm: move Mastek items after Metex in the model... |
tree | commitdiff |
2021-01-04 |
Frank Stettner | arachnid-labs-re-load-pro: Fix for get voltage and... |
tree | commitdiff |
2020-12-25 |
Ralf | fx2lafw: Unbreak SR_CONF_LIMIT_SAMPLES for large values... |
tree | commitdiff |
2020-12-25 |
Gerhard Sittig | ftdi-la: work around missing USB strings during device... |
tree | commitdiff |
2020-11-28 |
Niklas Thorne | asix-sigma: parse serial numbers as unsigned values |
tree | commitdiff |
2020-10-22 |
Gerhard Sittig | serial-dmm: add support for the Brymen BM820s family |
tree | commitdiff |
2020-10-22 |
Gerhard Sittig | dmm/bm52x: add support for recorded measurements (memor... |
tree | commitdiff |
2020-10-22 |
Gerhard Sittig | brymen-dmm: remove obsolete driver (support has moved... |
tree | commitdiff |
2020-10-22 |
Gerhard Sittig | dmm/bm85x: introduce DMM packet parser for Brymen BM850... |
tree | commitdiff |
2020-10-22 |
Gerhard Sittig | serial-dmm: more DMM parser callbacks (open, var length... |
tree | commitdiff |
2020-10-22 |
Gerhard Sittig | serial: extend stream detect for variable length packet... |
tree | commitdiff |
2020-10-06 |
Timo Kokkonen | rigol-dg: Add device/firmware specific quirks support. |
tree | commitdiff |
2020-10-06 |
Gerhard Sittig | itech-it8500: avoid "new" as a variable identifier |
tree | commitdiff |
2020-10-06 |
Gerhard Sittig | itech-it8500: declaration nits |
tree | commitdiff |
2020-10-06 |
Gerhard Sittig | itech-it8500: rephrase config get/set/list, reflect... |
tree | commitdiff |
2020-10-06 |
Timo Kokkonen | itech-it8500: ITECH IT8500 series DC electronic load... |
tree | commitdiff |
2020-10-06 |
Timo Kokkonen | itech-it8500: Initial driver skeleton. |
tree | commitdiff |
2020-10-04 |
Timo Kokkonen | rigol-dg: Fix reading current output signal duty cycle... |
tree | commitdiff |
2020-10-04 |
Timo Kokkonen | rigol-dg: Add Rigol DG800 and DG900 series support. |
tree | commitdiff |
2020-10-03 |
Gerhard Sittig | pce-322a: unbreak send_command() return code |
tree | commitdiff |
2020-09-28 |
Gerhard Sittig | rigol-dg: reduce redundancy in malloc() calls |
tree | commitdiff |
2020-09-28 |
Timo Kokkonen | rigol-dg: Initial Rigol DG1000z driver implementation. |
tree | commitdiff |
2020-09-28 |
Timo Kokkonen | rigol-dg: Initial driver skeleton. |
tree | commitdiff |
2020-09-27 |
Gerhard Sittig | ols: more robust device reset in acquisition stop |
tree | commitdiff |
2020-09-24 |
Ben Gardiner | ols: send CMD_RESET on acquisition stop |
tree | commitdiff |
2020-09-21 |
Gerhard Sittig | brymen-dmm: unbreak dBm reference impedance interpretation |
tree | commitdiff |
2020-09-21 |
Gerhard Sittig | brymen-dmm: unbreak temperature response parsing |
tree | commitdiff |
2020-09-21 |
Gerhard Sittig | brymen-dmm: rephrase bfunc and value text parsing |
tree | commitdiff |
2020-09-21 |
Gerhard Sittig | brymen-dmm: improve text to number conversion robustnes... |
tree | commitdiff |
2020-09-20 |
Gerhard Sittig | brymen-dmm: style nits, apply comm param defaults,... |
tree | commitdiff |
2020-09-20 |
Gerhard Sittig | brymen-dmm: unbreak BM85x communication by pulsing... |
tree | commitdiff |
2020-09-19 |
Gerhard Sittig | dmm/bm52x: introduce support for Brymen BM525s |
tree | commitdiff |
2020-09-19 |
Gerhard Sittig | serial-dmm: only do bytes to text conversion at higher... |
tree | commitdiff |
2020-09-01 |
Gerhard Sittig | korad-kaxxxxp: remove obsolete code (clear before read... |
tree | commitdiff |
2020-09-01 |
Gerhard Sittig | korad-kaxxxxp: speed up scan process, rephrase response... |
tree | commitdiff |
2020-08-28 |
Gerhard Sittig | korad-kaxxxxp: style cleanup in device scan, keep serno... |
tree | commitdiff |
2020-08-25 |
Gerhard Sittig | scpi-pps: use remote and local modes for HMP4000 |
tree | commitdiff |
2020-08-25 |
Gerhard Sittig | scpi-pps: Add more HMP4000 series devices |
tree | commitdiff |
next |