Difference between revisions of "Supported hardware"

Revision as of 04:11, 1 January 2014

sigrok is intended as a flexible, cross-platform, and hardware-independent software suite, i.e., it supports various devices from many different vendors.

Here is a list of currently supported devices (various stages of completeness) and devices we plan to support in the near future.

The lists are sorted by category (supported, in progress, planned), and alphabetically within those categories.

Logic analyzers

ARMFLY Mini-Logic (8ch, 24MHz)
Sigma2 2.png

ASIX SIGMA (16ch, 200MHz)
Braintechnology USB Interface V2.x (8/16ch, 24/12MHz)
Braintechnology USB-LPS (8/16ch, 24/12MHz)
ChronoVu LA8 (8ch, 100MHz)
CWAV USBee SX (8ch, 100MHz)
Dangerous Prototypes Buspirate (5ch, 1MHz)
EE Electronics ESLA100 (8ch, 24MHz)
IKALOGIC Scanalogic-2 (4ch, 20MHz)
IKALOGIC ScanaPLUS (9ch, 100MHz)
KingST KQS3506-LA16100 (16ch, 100/50/32/16MHz @ 3/6/9/16ch)
Lcsoft Mini Board (8/16ch, 24/12MHz)
Logic Shrimp (4ch, 20MHz)
MCU123 Saleae Logic clone (8ch, 24MHz)
MCU123 USBee AX Pro clone (8ch, 24MHz)
Openbench Logic Sniffer (32ch, 100MHz)
Robomotic BugLogic 3 (8ch, 24MHz)
Robomotic MiniLogic (8ch, 24MHz)
Saleae Logic (8ch, 24MHz)
Saleae Logic16 (16ch, 100/50/32/16MHz @ 3/6/9/16ch)
WayEngineer Saleae16 (16ch, 100/50/32/16MHz @ 3/6/9/16ch)
ZEROPLUS Logic Cube LAP-C(16032) (16ch, 100MHz)
ZEROPLUS LAP-16128U (16ch, 200MHz)
ChronoVu LA16 (16ch, 200MHz)
RockyLogic Ant8 (8ch, 500MHz)
RockyLogic Ant18e (8ch, 1GHz)
Acute PKLA-1216 (16ch, 200MHz)
Hantek 4032L (32ch, 400MHz)
Ideofy LA-08 (8ch, 96/60/30MHz @ 2/4/8ch)
Intronix Logicport LA1034 (34ch, 500MHz)
Link Instruments LA-5580 (80ch, 500MHz)
Microchip PICkit2 (3ch, 1MHz)
MiniLA (32ch, 100MHz)
MiniLA Mockup (32ch, 100MHz)
Sysclk LWLA1016 (16ch, 100MHz)
Sysclk LWLA1034 (34ch, 125MHz)
TechTools DigiView DV1-100 (18ch, 100MHz)
XMOS XTAG-2 (?ch, 50MHz)
ZEROPLUS Logic Cube LAP-C(322000) (32ch, 200MHz)
ZLG LA1032 (32ch, 100MHz)

Mixed-signal devices

ARMFLY AX-Pro¹ (8ch, 24MHz; 2ch analog, 24MSa/s, 40MHz BW)
EE Electronics ESLA201A¹ (8ch, 24MHz; 2ch analog, 24MSa/s, 40MHz BW)
XZL_Studio AX¹ (8ch, 24MHz; 2ch analog, 24MSa/s, 40MHz BW)
BitScope BS10 (8ch, 40MHz; 2ch analog, 20MSa/s, ? BW)
Link Instruments MSO-19 (8ch, 200MHz; 1ch analog, 200MSa/s, 60MHz BW)
Agilent MSO7104A (16ch, ?; 4ch analog, 2GSa/s, 100MHz BW)
Digilent Analog Discovery (16ch, 100MHz; 2ch analog, 100MSa/s, 5MHz BW)
Hantek 1008C (8ch)
Meilhaus MEphisto Scope1 (16ch, 100kHz; 2ch analog, 1MSa/s, 500kHz BW)
PoLabs PoScope Basic2 (16ch, 8MHz; 2ch analog, 200kSa/s, ? BW)
QA100.png

QuantAsylum QA100 (12ch; 2ch analog)
Rigol VS5202D (16ch, 200MHz; 2ch analog)
XZL_Studio DX (16ch, 24MHz; 2ch analog)

¹ Only the logic analyzer functionality is supported so far, analog support is work in progress.

Oscilloscopes

Device	Status	Comments
	supported	The Fluke ScopeMeter 199B is a handheld combined multimeter and oscilloscope. Only the multimeter functionality is supported; the device's slow communication speed does not allow for properly supporting it as an oscilloscope in sigrok.
	supported	The Hameg HMO1524 is a USB-/RS232-based, 4-channel oscilloscope with an analog bandwidth of 150MHz and 2GS/s sampling rate.
	supported	The Hameg HMO2024 is a USB-/RS232-based, 4-channel oscilloscope with an analog bandwidth of 200MHz and 2GS/s sampling rate.
	supported	The Hantek DSO-2090 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 40MHz and 100MS/s sampling rate.
	supported	The Rigol DS1052E is a 50MHz, 1GSa/s, 2-channel digital storage oscilloscope. It can be upgraded to 100MHz analog bandwidth with a software modification.
	supported	The Rigol DS1102E is a 100MHz, 1GSa/s, 2-channel digital storage oscilloscope.
	in progress	The Agilent DSO1014A is a 100MHz, 2GSa/s, 4-channel digital storage oscilloscope.
	in progress	The Focussz Fosc21 is a USB-serial based, 2-channel oscilloscope with an analog bandwidth of 3kHz and a sampling rate of 8kHz (1 channel) / 4kHz (2 channels).
	in progress	The Hantek DSO-5200A is a USB-based, 2-channel oscilloscope with an analog bandwidth of 200MHz and 250MS/s sampling rate.
	in progress	The Nexus-Computing OsciPrime is a USB-based, 2-channel oscilloscope with an analog bandwidth of 3.3MHz-8MHz. It is 100% open source hardware and software.
	in progress	The Velleman PCSU1000 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 50MHz and 1GS/s sampling rate.
	in progress	The Hantek DSO-2250 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 100MHz and 250MS/s sampling rate.
	planned	The Hantek DSO-1200 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 200MHz and 500MS/s sampling rate (and a multimeter).
	planned	The Fluke ScopeMeter 123 is a handheld, 2-channel oscilloscope with an analog bandwidth of 20MHz and 25MS/s sampling rate.
	planned	The Pico Technology PicoScope 2203 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 5MHz and 40/20MS/s sampling rate (1-/2-channel one-shot mode).
	planned	The Pico Technology PicoScope 2205 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 25MHz and 200/100MS/s sampling rate (1-/2-channel one-shot mode).
	planned	The Pico Technology PicoScope 3206 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 200MHz and 200/100MS/s sampling rate (1-/2-channel one-shot mode).
	planned	The Pico Technology PicoScope 5203 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 250MHz and 1/0,5GS/s sampling rate (1-/2-channel one-shot mode).
	planned	The Incite Technology USB-DUXfast is an USB-based analog data acquisition device. It supports up to 16 channels at 3MHz.
	planned	The UNI-T UTD2042C is a USB-/RS232-based, 2-channel oscilloscope with an analog bandwidth of 40MHz and 500MS/s sampling rate.
	planned	The Voltcraft DSO-220 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 20MHz and 60MS/s sampling rate.
	planned	The Voltcraft DSO-3062C is a 60MHz, 1GSa/s, 2-channel digital storage oscilloscope. It can be upgraded to 200MHz analog bandwidth with a software modification.
	planned	The Rigol DS2072 is a 70MHz, 2GSa/s, 2-channel digital storage oscilloscope.

Multimeters

Agilent U1231A (6000 counts, USB/Bluetooth)
Agilent U1232A (6000 counts, USB/Bluetooth)
Agilent U1233A (6000 counts, USB/Bluetooth)
BBC Goertz Metrawatt M2110 (30000 counts, RS232)
Brymen BM857 (50000 counts, RS232)
Digitek DT4000ZC (4000 counts, RS232)
Fluke 187/189 (50000 counts, RS232)
Fluke 287/289 (50000 counts, RS232)
Gossen Metrawatt Metrahit 16I (3100 counts, RS232)
Gossen Metrawatt Metrahit 18S (31000 counts, RS232)
ISO-TECH IDM103N (4000 counts, RS232)
MASTECH MAS345 (4000 counts, RS232)
Norma DM950 (21000 counts, RS232)
PCE PCE-DM32 (4000 counts, RS232)
PeakTech 3410 (4000 counts, RS232)
PeakTech 4370 (2000 counts, RS232)
RadioShack 22-168 (2000 counts, RS232)
RadioShack 22-805 (4000 counts, RS232)
RadioShack 22-812 (4000 counts, RS232)
Siemens B1105 (310000 counts, RS232)
Tecpel DMM-8061 (4000 counts, RS232/USB)
TekPower TP4000ZC (4000 counts, RS232)
Tenma 72-7745 (4000 counts, RS232/USB)
UNI-T UT60E (4000 counts, RS232/USB)
UNI-T UT61C (6000 counts, RS232/USB)
UNI-T UT61D (6000 counts, RS232/USB)
UNI-T UT61E (22000 counts, RS232/USB)
V&A VA18B (6000 counts, USB)
Victor 86C (4000 counts, USB)
Victor 70C (4000 counts, USB)
Voltcraft M-3650D (2000 counts, RS232)
Voltcraft M-4650CR (20000 counts, RS232)
Voltcraft VC-820 (4000 counts, RS232/USB)
Voltcraft VC-830 (6000 counts, RS232/USB)
Voltcraft VC-840 (4000 counts, RS232/USB)
Tenma 72-1016 (6000 counts, RS232/USB)
Tenma 72-7730 (20000 counts, RS232/USB)
Tenma 72-7732 (40000 counts, RS232/USB)
Tenma 72-7750 (6000 counts, RS232/USB)
Tenma 72-9380A (40000 counts, RS232/USB)
Voltcraft M-3650CR (2000 counts, RS232)
APPA 107 (4000 / 20000 counts, RS232)
Digitek DT8000 (8000 counts, RS232)
Digitek DT80000 (80000 counts, RS232)
Escort 179 (10000 counts, RS232)
Gossen-Metrawatt METRAHIT 30M (1200000 counts, RS232/USB)
MASTECH M9803R (4000 counts, RS232)
Metrix MX53 (50000 counts, RS232)
Metrix MX56C (50000 counts, RS232)
Protek 6500 (50000 counts, RS232)
Voltcraft M-3890DT (4000 counts, USB)
Voltcraft M-4660A (20000 counts, RS232)
Voltcraft VC-920 (40000/4000 counts, RS232/USB)
Voltcraft VC-940 (40000/4000 counts, RS232/USB)

LCR meters

TODO.

Sound level meters

CEM DT-8852 (USB)
Colead SL-5868P (RS232)
Kecheng KC-330B (RS232)
Tondaj SL-814 (USB)
Voltcraft DL-161S (USB)
PCE PCE-222 (also: light-/thermo-/hygrometer; RS232)
Voltcraft DL-160S (USB)

Thermometers

Device	Status	Comments
	supported	The Lascar Electronics EL-USB-2 is a USB-based temperature and humidity logger.
	supported	The MIC 98581 is a USB-based temperature logger.
	supported	The MIC 98583 is a USB-based temperature and humidity logger.
	supported	The UNI-T UT325 is a dual thermocouple logging thermometer.
	supported	The Voltcraft K204 is a 4-channel temperature logger with RS232 connectivity.
	planned	The APPA 55II is a 2-channel temperature logger with optical RS-232.
	planned	The Elitech RC-3 is a USB-based temperature logger.
	planned	The PCE PCE-222 is a multi-function measurement device (light meter, thermometer, hygrometer, and sound level meter) with RS232 connectivity.
	planned	The RDing TEMPer is a USB-based temperature logger.
	planned	The RDing TEMPer Gold is a USB-based temperature logger.
	planned	The RDing TEMPer1 is a USB-based temperature logger.
	planned	The RDing TEMPer1K2 is a USB-based temperature logger.
	planned	The Voltcraft DL-120TH is a USB-based temperature logger.
	planned	The Voltcraft DL-140TH is a USB-based temperature logger.

Hygrometers

Lascar Electronics EL-USB-2 (temp/humidity, USB)
MIC 98583 (temp/humidity, USB)
PCE PCE-222 (also: light-/soundlevelmeter; RS232)
SiLabs Si7005USB-Dongle (USB)

Anemometers

MASTECH MS6252B (USB)

Light meters

Lutron YK-2005LX (RS232)
PCE PCE-222 (RS232)

Energy meters

EDF Teleinfo (USB)

DAQs

NI USB-6008 (8/2 analog inputs/outputs, 12 digital I/Os)

Dataloggers

Lascar Electronics EL-USB-CO (carbon monoxide (CO) logger, USB)
GSG Indoor Air Monitor (air quality monitor, USB)
MAUL studio i (weighing scale, RS232)
Voltcraft CO-20 (air quality monitor, USB)

Function generators

Hantek DDS-3X25 (25MHz, PC-based, USB)
Siglent SDG1010 (10MHz, USB)

RF receivers

Per Vices Noctar (100kHz-4GHz, IQ modulator/demodulator, PCIe)

Spectrum analyzers

TODO.

Power supplies

Manson HCS-3202 (1ch, 1-36V/0-10A, USB)

GPIB interfaces

Beiming S82357 (hardware-based, USB)
ICS 488-USB (hardware-based, USB)
GPIB-USB 82357B clone (hardware-based, USB)
National Instruments GPIB-ENET (hardware-based, Ethernet)
National Instruments GPIB-USB-HS (hardware-based, USB)
Prologix GPIB-USB (firmware-based, USB)

Potential other candidates

If you own any other logic analyzers, oscilloscopes, multimeters, dataloggers, ... and want to add support for them in sigrok (or donate/lend devices to developers), please let us know. We're always happy to add more hardware support! Join the mailing list or ask on IRC #sigrok if you want to help out.

@@ Line 6: / Line 6: @@
 == Logic analyzers ==
-'''Supported:'''
 <gallery widths="100px" heights="100px">
-File:ARMFLY MINI LOGIC.png|<small>[[ARMFLY Mini-Logic]] (8ch, 24MHz)</small>
+File:ARMFLY MINI LOGIC.png|[[File:Nuvola OK.png|16px]] <small>[[ARMFLY Mini-Logic]] (8ch, 24MHz)</small>
-File:Sigma2_2.png|<small>[[ASIX SIGMA]] (16ch, 200MHz)</small>
+File:Sigma2_2.png|[[File:Nuvola OK.png|16px]] <small>[[ASIX SIGMA]] (16ch, 200MHz)</small>
-File:Braintechnology_usb_interface_v26.png|<small>[[Braintechnology USB Interface V2.x]] (8/16ch, 24/12MHz)</small>
+File:Braintechnology_usb_interface_v26.png|[[File:Nuvola OK.png|16px]] <small>[[Braintechnology USB Interface V2.x]] (8/16ch, 24/12MHz)</small>
-File:Braintechnology_usb_lps.png|<small>[[Braintechnology USB-LPS]] (8/16ch, 24/12MHz)</small>
+File:Braintechnology_usb_lps.png|[[File:Nuvola OK.png|16px]] <small>[[Braintechnology USB-LPS]] (8/16ch, 24/12MHz)</small>
-File:Chronovu la8 front.png|link=ChronoVu LA8|<small>[[ChronoVu LA8]] (8ch, 100MHz)</small>
+File:Chronovu la8 front.png|link=ChronoVu LA8|[[File:Nuvola OK.png|16px]] <small>[[ChronoVu LA8]] (8ch, 100MHz)</small>
-File:Cwav_usbee_sx.png|<small>[[CWAV USBee SX]] (8ch, 100MHz)</small>
+File:Cwav_usbee_sx.png|[[File:Nuvola OK.png|16px]] <small>[[CWAV USBee SX]] (8ch, 100MHz)</small>
-File:Buspirate_v3.png|<small>[[Dangerous Prototypes Buspirate]] (5ch, 1MHz)</small>
+File:Buspirate_v3.png|[[File:Nuvola OK.png|16px]] <small>[[Dangerous Prototypes Buspirate]] (5ch, 1MHz)</small>
-File:Eeelec xla esla100.png|<small>[[EE Electronics ESLA100]] (8ch, 24MHz)</small>
+File:Eeelec xla esla100.png|[[File:Nuvola OK.png|16px]] <small>[[EE Electronics ESLA100]] (8ch, 24MHz)</small>
-File:Ikalogic_scanalogic2.png|<small>[[IKALOGIC Scanalogic-2]] (4ch, 20MHz)</small>
+File:Ikalogic_scanalogic2.png|[[File:Nuvola OK.png|16px]] <small>[[IKALOGIC Scanalogic-2]] (4ch, 20MHz)</small>
-File:Ikalogic scanaplus mugshot.png|<small>[[IKALOGIC ScanaPLUS]] (9ch, 100MHz)</small>
+File:Ikalogic scanaplus mugshot.png|[[File:Nuvola OK.png|16px]] <small>[[IKALOGIC ScanaPLUS]] (9ch, 100MHz)</small>
-File:Kingst kqs3506 la16100.png|<small>[[KingST KQS3506-LA16100]] (16ch, 100/50/32/16MHz @ 3/6/9/16ch)</small>
+File:Kingst kqs3506 la16100.png|[[File:Nuvola OK.png|16px]] <small>[[KingST KQS3506-LA16100]] (16ch, 100/50/32/16MHz @ 3/6/9/16ch)</small>
-File:Lcsoft-miniboard-front.png|<small>[[Lcsoft Mini Board]] (8/16ch, 24/12MHz)</small>
+File:Lcsoft-miniboard-front.png|[[File:Nuvola OK.png|16px]] <small>[[Lcsoft Mini Board]] (8/16ch, 24/12MHz)</small>
-File:logic-shrimp-front.png|<small>[[Logic Shrimp]] (4ch, 20MHz)</small>
+File:logic-shrimp-front.png|[[File:Nuvola OK.png|16px]] <small>[[Logic Shrimp]] (4ch, 20MHz)</small>
-File:Mcu123 saleae logic clone.png|<small>[[MCU123 Saleae Logic clone]] (8ch, 24MHz)</small>
+File:Mcu123 saleae logic clone.png|[[File:Nuvola OK.png|16px]] <small>[[MCU123 Saleae Logic clone]] (8ch, 24MHz)</small>
-File:Usbee_ax_clone_front.png|<small>[[MCU123 USBee AX Pro clone]] (8ch, 24MHz)</small>
+File:Usbee_ax_clone_front.png|[[File:Nuvola OK.png|16px]] <small>[[MCU123 USBee AX Pro clone]] (8ch, 24MHz)</small>
-File:Openbench logic sniffer front.png|<small>[[Openbench Logic Sniffer]] (32ch, 100MHz)</small>
+File:Openbench logic sniffer front.png|[[File:Nuvola OK.png|16px]] <small>[[Openbench Logic Sniffer]] (32ch, 100MHz)</small>
-File:Robomotic buglogic3.png|<small>[[Robomotic BugLogic 3]] (8ch, 24MHz)</small>
+File:Robomotic buglogic3.png|[[File:Nuvola OK.png|16px]] <small>[[Robomotic BugLogic 3]] (8ch, 24MHz)</small>
-File:Robomotic_minilogic.png|<small>[[Robomotic MiniLogic]] (8ch, 24MHz)</small>
+File:Robomotic_minilogic.png|[[File:Nuvola OK.png|16px]] <small>[[Robomotic MiniLogic]] (8ch, 24MHz)</small>
-File:Saleae Logic.png|<small>[[Saleae Logic]] (8ch, 24MHz)</small>
+File:Saleae Logic.png|[[File:Nuvola OK.png|16px]] <small>[[Saleae Logic]] (8ch, 24MHz)</small>
-File:Saleae_Logic16_bottom.png|<small>[[Saleae Logic16]] (16ch, 100/50/32/16MHz @ 3/6/9/16ch)</small>
+File:Saleae_Logic16_bottom.png|[[File:Nuvola OK.png|16px]] <small>[[Saleae Logic16]] (16ch, 100/50/32/16MHz @ 3/6/9/16ch)</small>
-File:Wayengineer saleae16.png|<small>[[WayEngineer Saleae16]] (16ch, 100/50/32/16MHz @ 3/6/9/16ch)</small>
+File:Wayengineer saleae16.png|[[File:Nuvola OK.png|16px]] <small>[[WayEngineer Saleae16]] (16ch, 100/50/32/16MHz @ 3/6/9/16ch)</small>
-File:Zeroplus Logic Cube.png|<small>[[ZEROPLUS Logic Cube LAP-C(16032)]] (16ch, 100MHz)</small>
+File:Zeroplus Logic Cube.png|[[File:Nuvola OK.png|16px]] <small>[[ZEROPLUS Logic Cube LAP-C(16032)]] (16ch, 100MHz)</small>
-File:Zeroplus_lap-16128u.png|<small>[[ZEROPLUS LAP-16128U]] (16ch, 200MHz)</small>
+File:Zeroplus_lap-16128u.png|[[File:Nuvola OK.png|16px]] <small>[[ZEROPLUS LAP-16128U]] (16ch, 200MHz)</small>
-</gallery>
-'''Work in progress:'''
+File:Chronovu la16.png|[[File:Nuvola Orange.png|16px]] <small>[[ChronoVu LA16]] (16ch, 200MHz)</small>
+File:Rockylogic_ant8.png|[[File:Nuvola Orange.png|16px]] <small>[[RockyLogic Ant8]] (8ch, 500MHz)</small>
+File:RockyLogic Ant18e.png|[[File:Nuvola Orange.png|16px]] <small>[[RockyLogic Ant18e]] (8ch, 1GHz)</small>
-<gallery widths="100px" heights="100px">
+File:Acute_pkla1216.png|[[File:Nuvola Red.png|16px]] <small>[[Acute PKLA-1216]] (16ch, 200MHz)</small>
-File:Chronovu la16.png|<small>[[ChronoVu LA16]] (16ch, 200MHz)</small>
+File:Hantek4032L_BoxSideView.png|[[File:Nuvola Red.png|16px]] <small>[[Hantek 4032L]] (32ch, 400MHz)</small>
-File:Rockylogic_ant8.png|<small>[[RockyLogic Ant8]] (8ch, 500MHz)</small>
+File:Ideofy_la_08.png|[[File:Nuvola Red.png|16px]] <small>[[Ideofy LA-08]] (8ch, 96/60/30MHz @ 2/4/8ch)</small>
-File:RockyLogic Ant18e.png|<small>[[RockyLogic Ant18e]] (8ch, 1GHz)</small>
+File:Intronix Logicport.png|[[File:Nuvola Red.png|16px]] <small>[[Intronix Logicport LA1034]] (34ch, 500MHz)</small>
-</gallery>
+File:Sigrok_logo_no_text_transparent_512.png|[[File:Nuvola Red.png|16px]] <small>[[Link Instruments LA-5580]] (80ch, 500MHz)</small>
+File:Microchip_pickit2.png|[[File:Nuvola Red.png|16px]] <small>[[Microchip PICkit2]] (3ch, 1MHz)</small>
-'''Planned:'''
+File:Minila parport.png|[[File:Nuvola Red.png|16px]] <small>[[MiniLA]] (32ch, 100MHz)</small>
+File:Minila_mockup.png|[[File:Nuvola Red.png|16px]] <small>[[MiniLA Mockup]] (32ch, 100MHz)</small>
-<gallery widths="100px" heights="100px">
+File:Sysclk lwla1016.png|[[File:Nuvola Red.png|16px]] <small>[[Sysclk LWLA1016]] (16ch, 100MHz)</small>
-File:Acute_pkla1216.png|<small>[[Acute PKLA-1216]] (16ch, 200MHz)</small>
+File:Sysclk lwla1034.jpg|[[File:Nuvola Red.png|16px]] <small>[[Sysclk LWLA1034]] (34ch, 125MHz)</small>
-File:Hantek4032L_BoxSideView.png|<small>[[Hantek 4032L]] (32ch, 400MHz)</small>
+File:Techtools_digiview_dv1-100.png|[[File:Nuvola Red.png|16px]] <small>[[TechTools DigiView DV1-100]] (18ch, 100MHz)</small>
-File:Ideofy_la_08.png|<small>[[Ideofy LA-08]] (8ch, 96/60/30MHz @ 2/4/8ch)</small>
+File:Xmos xtag2.png|[[File:Nuvola Red.png|16px]] <small>[[XMOS XTAG-2]] (?ch, 50MHz)</small>
-File:Intronix Logicport.png|<small>[[Intronix Logicport LA1034]] (34ch, 500MHz)</small>
+File:Sigrok_logo_no_text_transparent_512.png|[[File:Nuvola Red.png|16px]] <small>[[ZEROPLUS Logic Cube LAP-C(322000)]] (32ch, 200MHz)</small>
-File:Sigrok_logo_no_text_transparent_512.png|<small>[[Link Instruments LA-5580]] (80ch, 500MHz)</small>
+File:Zlg_la1032.png|[[File:Nuvola Red.png|16px]] <small>[[ZLG LA1032]] (32ch, 100MHz)</small>
-File:Microchip_pickit2.png|<small>[[Microchip PICkit2]] (3ch, 1MHz)</small>
-File:Minila parport.png|<small>[[MiniLA]] (32ch, 100MHz)</small>
-File:Minila_mockup.png|<small>[[MiniLA Mockup]] (32ch, 100MHz)</small>
-File:Sysclk lwla1016.png|<small>[[Sysclk LWLA1016]] (16ch, 100MHz)</small>
-File:Sysclk lwla1034.jpg|<small>[[Sysclk LWLA1034]] (34ch, 125MHz)</small>
-File:Techtools_digiview_dv1-100.png|<small>[[TechTools DigiView DV1-100]] (18ch, 100MHz)</small>
-File:Xmos xtag2.png|<small>[[XMOS XTAG-2]] (?ch, 50MHz)</small>
-File:Sigrok_logo_no_text_transparent_512.png|<small>[[ZEROPLUS Logic Cube LAP-C(322000)]] (32ch, 200MHz)</small>
-File:Zlg_la1032.png|<small>[[ZLG LA1032]] (32ch, 100MHz)</small>
 </gallery>

Difference between revisions of "Supported hardware"

Revision as of 04:11, 1 January 2014

Contents

Logic analyzers

Mixed-signal devices

Oscilloscopes

Multimeters

LCR meters

Sound level meters

Thermometers

Hygrometers

Anemometers

Light meters

Energy meters

DAQs

Dataloggers

Function generators

RF receivers

Spectrum analyzers

Power supplies

GPIB interfaces

Potential other candidates

Navigation menu

Difference between revisions of "Supported hardware"

Revision as of 04:11, 1 January 2014

Logic analyzers

Mixed-signal devices

Oscilloscopes

Multimeters

LCR meters

Sound level meters

Thermometers

Hygrometers

Anemometers

Light meters

Energy meters

DAQs

Dataloggers

Function generators

RF receivers

Spectrum analyzers

Power supplies

GPIB interfaces

Potential other candidates

Navigation menu

Search