Pico Technology PicoScope 5203

From sigrok
Jump to: navigation, search
PicoScope 5203.

The Pico Technology PicoScope 5203 is a 2-channel USB-based PC oscilloscope (and spectrum analyzer and data logger and logic analyzer). It supports a bandwidth of 250 MHz. The max. sampling rate (one-shot) is 1 GS/s (one channel mode) or 500 MS/s (two channel mode). The max. sampling rate for repetitive signals is 20 GS/s, the max. sampling rate in continuous streaming mode is 1 MS/s.

See Pico Technology PicoScope 5203/Info for more details (such as lsusb -vvv output) about the device.

Hardware

  • 2x Micron D9JLR DDR2 SDRAM 512M (32Mx16)
  • Xilinx Spartan XC3S400
  • Microchip LC24641 EEPROM for usb id
  • Cypress CY7C68013A-56PVXC (FX2LP) USB interface
  • Texas Instruments ADC08D500 High Performance, Low Power, Dual 8-Bit, 500 MSPS A/D Converter
  • Analog Devices AD9742 12-Bit, 210 MSPS TxDAC D/A Converter
  • Analog Devices ADCMP562 high speed comparator
  • 3x pca9557
  • 4x Omron g6h-2-100
  • 3x MEDER electronic SILO5-1A72-71DHR

Photos

Protocol

Firmware

Start acquisition

Sample format

End acquisition

Triggers

Voltage ranges

±100 mV to ±20 V in 8 ranges

Resources