Supported hardware

From sigrok
Jump to navigation Jump to search

sigrok is intended as a flexible, cross-platform, and hardware-independent software suite, i.e., it supports various devices from many different vendors.

Here is a list of currently supported devices (various stages of completeness) and devices we plan to support in the near future.

The lists are sorted by category (supported, in progress, planned), and alphabetically within those categories.

Logic analyzers

Device Status Comments
ARMFLY MINI LOGIC.png
Nuvola OK.png
supported
The ARMFLY Mini-Logic is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.
Nuvola OK.png
supported
The ASIX SIGMA is a USB-based, 16-channel logic analyzer with up to 200MHz sampling rate, and with 256Mbit on-board memory.
Braintechnology usb interface v26.png
Nuvola OK.png
supported
The Braintechnology USB Interface V2.x is a Cypress FX2 eval board, which can be used as USB-based, 16-channel logic analyzer with up to 24MHz sampling rate.
Braintechnology usb lps.png
Nuvola OK.png
supported
The Braintechnology USB-LPS is a USB-based, 16-channel logic analyzer (and signal generator) with up to 24MHz sampling rate.
Chronovu la8 front.png
Nuvola OK.png
supported
The ChronoVu LA8 is a USB-based, 8-channel logic analyzer with up to 100MHz sampling rate.
Cwav usbee sx.png
Nuvola OK.png
supported
The CWAV USBee SX is a USB-based, 8-channel logic analyzer (and signal generator) with up to 24MHz sampling rate.
Buspirate v3.png
Nuvola Orange.png
in progress
The Dangerous Prototypes Buspirate is a USB-based, 5-channel logic analyzer with up to 1MHz sampling rate. It uses the extended SUMP protocol.

The Buspirate supports a logic analyzer mode and can thus be used for sample captures, however only at low speeds.
Eeelec xla esla100.png
Nuvola OK.png
supported
The EE Electronics ESLA100 is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.
Lcsoft-miniboard-front.png
Nuvola OK.png
supported
The Lcsoft Mini Board is a Cypress FX2 eval board, which can be used as USB-based, 16-channel logic analyzer with up to 24MHz sampling rate.
Logic-shrimp-front.png
Nuvola OK.png
supported
The Logic Shrimp is a USB-based, 4-channel logic analyzer with up to 20MHz sampling rate. It uses the extended SUMP protocol.
Mcu123 saleae logic clone top.jpg
Nuvola OK.png
supported
The MCU123 Saleae Logic clone is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.
Usbee ax clone front.png
Nuvola OK.png
supported
The MCU123 USBee AX Pro clone is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.
Openbench logic sniffer front.png
Nuvola OK.png
supported
The Openbench Logic Sniffer (OLS) is a USB-based (and FPGA-based), 32-channel logic analyzer with up to 100MHz sampling rate and advanced trigger functionality. It is a fully open source device — the circuit design, VHDL code for the FPGA, firmware for the PIC microcontroller and Java-based client software are all freely available. It uses the extended SUMP protocol.
Robomotic buglogic3.png
Nuvola OK.png
supported
The Robomotic BugLogic 3 is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.
Robomotic minilogic.png
Nuvola OK.png
supported
The Robomotic MiniLogic is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.
Saleae Logic.png
Nuvola OK.png
supported
The Saleae Logic is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.
Zeroplus Logic Cube.png
Nuvola OK.png
supported
The ZEROPLUS Logic Cube LAP-C(16032) is a USB-based, 16-channel logic analyzer with up to 100MHz sampling rate.
Rockylogic ant8.png
Nuvola Orange.png
in progress
The RockyLogic Ant8 is a USB-based, 8-channel logic analyzer with up to 500MHz sampling rate.
RockyLogic Ant18e.png
Nuvola Orange.png
in progress
The RockyLogic Ant18e is a USB-based, 18-channel logic analyzer with up to 1GHz sampling rate.
Acute pkla1216.png
Nuvola Red.png
planned
The Acute PKLA-1216 is a USB-based, 16-channel logic analyzer with up to 200MHz sampling rate.
Ideofy la 08.png
Nuvola Red.png
planned
The Ideofy LA-08 is a USB-based, 8-channel logic analyzer with a max. samplerate of 96Msps@2ch (or 60msps@4ch, or 30msps@8ch).
Ikalogic scanalogic2.png
Nuvola Red.png
planned
The Ikalogic SCANALOGIC-2 PRO is a USB-based, 4-channel logic analyzer with up to 20MHz sampling rate.
Intronix Logicport.png
Nuvola Red.png
planned
The Intronix Logicport LA1034 is a USB-based (and FPGA-based), 34-channel logic analyzer with up to 500MHz sampling rate.
Sigrok logo no text transparent 512.png
Nuvola Red.png
planned
The Link Instruments LA-5580 is a USB-based, 80-channel logic analyzer with up to 500MHz samplerate. There's an optional pattern generator pod with 100 Mpoints/s.
Microchip pickit2.png
Nuvola Red.png
planned
The Microchip PICkit2 is a USB-based, 3-channel logic analyzer with up to 1MHz sampling rate.

The PICkit2 is actually a programmer/debugger for PIC microcontrollers, but it can also be used as logic analyzer.
Minila mockup.jpg
Nuvola Red.png
planned
The MiniLA Mockup is a USB-based, 32-channel logic analyzer with up to 100MHz sampling rate.
Saleae Logic16 bottom.png
Nuvola Red.png
planned
The Saleae Logic16 is a USB-based, 16-channel logic analyzer with 100/50/25/12.5MHz sampling rate (at 2/4/8/16 enabled channels).
Sysclk lwla1016 front.jpg
Nuvola Red.png
planned
The Sysclk LWLA1016 is a USB-based, 16-channel logic analyzer with up to 100MHz sampling rate.
Techtools digiview dv1-100.png
Nuvola Red.png
planned
The TechTools DigiView DV1-100 is a USB-based, 18-channel logic analyzer with 100MHz sampling rate.
Zeroplus lap-16128u.png
Nuvola Red.png
planned
The ZEROPLUS LAP-16128U is a USB-based, 16-channel logic analyzer with up to 200MHz sampling rate.
Sigrok logo no text transparent 512.png
Nuvola Red.png
planned
The ZEROPLUS Logic Cube LAP-C(322000) is a USB-based, 32-channel logic analyzer with a max. samplerate of 200MHz.
Zlg la1032.png
Nuvola Red.png
planned
The ZLG LA1032 is a USB-based, 32-channel, 100MHz logic analyzer.

Mixed-signal devices

Devices which can be used as both logic analyzer and oscilloscopes.

Device Status Comments
AX-Pro.JPG
Nuvola OK.png
supported
The ARMFLY AX-Pro is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.

Note: Only the logic analyzer functionality is supported so far, analog support is work in progress.

Esla201a.JPG
Nuvola OK.png
supported
The EE Electronics ESLA201A is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.

Note: Only the logic analyzer functionality is supported so far, analog support is work in progress.

Sigrok logo no text transparent 512.png
Nuvola OK.png
supported
The XZL Studio DX is a USB-based, 16-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.

Note: Only the logic analyzer functionality is supported so far, analog support is work in progress.

Link Instruments MSO-19 front.png
Nuvola Orange.png
in progress
The Link Instruments MSO-19 is a USB-based, 1-channel 2GSa/s oscilloscope, 8-channel 200MSa/s logic analyzer, 100MSa/s pattern generator and a TDR.
Agilent MSO7104A.jpg
Nuvola Red.png
planned
The Agilent MSO7104A is a standalone, 4-channel mixed-signal digital storage oscilloscope (1GHz bandwidth, 4GSa/s samplerate, 16-channel logic analyzer).
Digilent analog-discovery.jpg
Nuvola Red.png
planned
The Digilent Analog Discovery is a USB-based 100MSa/s dual channel oscilloscope, function generator, logic analyzer and pattern generator.
Meilhaus mephisto scope1.png
Nuvola Red.png
planned
The Meilhaus MEphisto Scope1 is a USB-based multifunction acquisition device.
Polabs poscope basic2.png
Nuvola Red.png
planned
The PoLabs PoScope Basic2 is a USB-based, 16-channel logic analyzer (plus oscilloscope, signal/pattern generator, and more) with up to 8MHz sampling rate.
Nuvola Red.png
planned
The QuantAsylum QA100 is a USB-based, mixed-mode oscilloscope with 12 digital inputs, 2 analog, 1 trigger and 1 audio waveform generator.
Nuvola Red.png
planned
The Rigol VS5202D is a USB-based, 2-channel analog oscilloscope (400MSa/S, 200MHz bandwidth) and 16-channel logic analyzer (200MHz sampling rate).

Oscilloscopes

Device Status Comments
Fluke Scopemeter 199B.png
Nuvola OK.png
supported
The Fluke ScopeMeter 199B is a handheld combined multimeter and oscilloscope. Only the multimeter functionality is supported; the device's slow communication speed does not allow for properly supporting it as an oscilloscope in sigrok.
Hantek DSO-2090.png
Nuvola OK.png
supported
The Hantek DSO-2090 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 40MHz and 100MS/s sampling rate.
Rigol DS1052E.png
Nuvola OK.png
supported
The Rigol DS1052E is a 50MHz, 1GSa/s, 2-channel digital storage oscilloscope. It can be upgraded to 100MHz analog bandwidth with a software modification.
Hantek dso-5200a device front.png
Nuvola Orange.png
in progress
The Hantek DSO-5200A is a USB-based, 2-channel oscilloscope with an analog bandwidth of 200MHz and 250MS/s sampling rate.
OsciPrime.png
Nuvola Orange.png
in progress
The Nexus-Computing OsciPrime is a USB-based, 2-channel oscilloscope with an analog bandwidth of 3.3MHz-8MHz. It is 100% open source hardware and software.
Velleman PCSU1000.png
Nuvola Orange.png
in progress
The Velleman PCSU1000 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 50MHz and 1GS/s sampling rate.
Sigrok logo no text transparent 512.png
Nuvola Red.png
planned
The Hantek DSO-1200 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 200MHz and 500MS/s sampling rate (and a multimeter).
Fluke scopemeter123.png
Nuvola Red.png
planned
The Fluke ScopeMeter 123 is a handheld, 2-channel oscilloscope with an analog bandwidth of 20MHz and 25MS/s sampling rate.
Focussz fosc21 back.jpg
Nuvola Red.png
planned
The Focussz Fosc21 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 3kHz and a sampling rate of 8kHz (1 channel) / 4kHz (2 channels).
Picoscope 2203.png
Nuvola Red.png
planned
The Pico Technology PicoScope 2203 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 5MHz and 40/20MS/s sampling rate (1-/2-channel one-shot mode).
PicoScope 2205 front.jpg
Nuvola Red.png
planned
The Pico Technology PicoScope 2205 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 25MHz and 200/100MS/s sampling rate (1-/2-channel one-shot mode).
Picoscope 3206.png
Nuvola Red.png
planned
The Pico Technology PicoScope 3206 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 200MHz and 200/100MS/s sampling rate (1-/2-channel one-shot mode).
Picoscope 5203.png
Nuvola Red.png
planned
The Pico Technology PicoScope 5203 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 250MHz and 1/0,5GS/s sampling rate (1-/2-channel one-shot mode).
Usbduxfast.png
Nuvola Red.png
planned
The Incite Technology USB-DUXfast is an USB-based analog data acquisition device. It supports up to 16 channels at 3MHz.
Voltcraft DSO-3062C.png
Nuvola Red.png
planned
The Voltcraft DSO-3062C is a 60MHz, 1GSa/s, 2-channel digital storage oscilloscope. It can be upgraded to 200MHz analog bandwidth with a software modification.

Multimeters

Device Status Comments
Sigrok logo no text transparent 512.png
Nuvola OK.png
supported
The Agilent U1231A is a 6000 counts, CAT III (600V) handheld digital multimeter with USB or Bluetooth connectivity.
Agilent U1232A.png
Nuvola OK.png
supported
The Agilent U1232A is a 6000 counts, CAT III (600V) handheld digital multimeter with USB or Bluetooth connectivity.
Sigrok logo no text transparent 512.png
Nuvola OK.png
supported
The Agilent U1233A is a 6000 counts, CAT III (600V) handheld digital multimeter with USB or Bluetooth connectivity.
Bm 857 mugshot 500000.png
Nuvola Orange.png
in progress
The Brymen BM857 is a 50000 counts (500000 DC), CAT III (1000V) / CAT IV (600V) handheld digital multimeter with RS232 connectivity.
Digitek dt4000zc device front.png
Nuvola OK.png
supported
The Digitek DT4000ZC is a 4000 counts, CAT II (600V) handheld digital multimeter with RS232 connectivity.
Fluke 187.png
Nuvola OK.png
supported
The Fluke 187/189 are 50000 counts, handheld digital multimeters with RS232 connectivity.
Fluke 287.png
Nuvola OK.png
supported
The Fluke 287/289 are 50000 counts handheld digital multimeters with RS232 connectivity.
Mastech mas345 device front.png
Nuvola OK.png
supported
The MASTECH MAS345 is a 4000 counts, CAT II handheld digital multimeter with RS232 connectivity.
Pce-pce-dm32.png
Nuvola OK.png
supported
The PCE PCE-DM32 is a 4000 counts, CAT III (1000V) / CAT IV (600V) handheld digital multimeter with RS232 connectivity.
Metex me-31.png
Nuvola OK.png
supported
The PeakTech 3410 is a 4000 counts, CAT II (1000V) handheld digital multimeter with RS232 connectivity.
Peaktech 4370 device front.png
Nuvola OK.png
supported
The PeakTech 4370 is a 2000 counts, CAT II (1000V) handheld digital multimeter with RS232 connectivity.
Rs 22 168 mugshot.png
Nuvola OK.png
supported
The RadioShack 22-168 is a 2000 counts, handheld digital multimeter with RS232 connectivity.
Radioshack 22 812 front.png
Nuvola OK.png
supported
The RadioShack 22-812 is a 4000 counts, CAT II (600V) handheld digital multimeter with RS232 connectivity.
Tp4000zc front.png
Nuvola OK.png
supported
The TekPower TP4000ZC is a 4000 counts, CAT II (600V) handheld digital multimeter with RS232 connectivity.
Uni t ut61d device.png
Nuvola OK.png
supported
The UNI-T UT61D is a 6000 counts, CAT II (600V) / CAT III (300V) handheld digital multimeter with RS232 or USB connectivity.
Old ver front.png
Nuvola OK.png
supported
The UNI-T UT61E is a 22000 counts, CAT II (600V) / CAT III (300V) handheld digital multimeter with RS232 or USB connectivity.
Va va18b.png
Nuvola OK.png
supported
The V&A VA18B is a 6000 counts, CAT II (1000V) handheld digital multimeter with USB connectivity.
Victor 86c device front.png
Nuvola OK.png
supported
The Victor 86C is a 4000 counts, CAT III (1000V) handheld digital multimeter with USB connectivity.
Victor 70C.png
Nuvola OK.png
supported
The Victor 70C is a 4000 counts, CAT II handheld digital multimeter with USB connectivity.
Voltcraft vc820 device.png
Nuvola OK.png
supported
The Voltcraft VC-820 is a 4000 counts, CAT III (1000V) / CAT IV (600V) handheld digital multimeter with RS232 or USB connectivity.
Voltcraft vc840 device front.png
Nuvola Orange.png
in progress
The Voltcraft VC-840 is a 4000 counts, CAT IV (600V) handheld digital multimeter with RS232 or USB connectivity.
Escort 179 device front.png
Nuvola Red.png
planned
The Escort 179 is a 10000 counts, handheld digital multimeter with RS232 connectivity.
800px-Mastech m9803r device front.png
Nuvola Red.png
planned
The MASTECH M9803R is a 4000 counts, CAT II (1000V) digital bench multimeter with RS232 connectivity.
Sigrok logo no text transparent 512.png
Nuvola Red.png
planned
The Protek 6500 is a 50000 counts handheld digital multimeter with RS232 connectivity.
Voltcraft m4660a device front.png
Nuvola Red.png
planned
The Voltcraft M-4660A is a 20000 counts, handheld digital multimeter with RS232 connectivity.

LCR meters

TODO.

Sound level meters

Device Status Comments
Colead SL-5868P.png
Nuvola OK.png
supported
The Colead SL-5868P is a sound level meter with RS232 connectivity.
Tondaj sl-814.png
Nuvola OK.png
supported
The Tondaj SL-814 is a sound level meter with USB connectivity.
CEM DT-8852.png
Nuvola Red.png
planned
The CEM DT-8852 is an IEC 61672-1 class 2-compliant sound level meter with USB connectivity.
Pce pce-222 front.png
Nuvola Red.png
planned
The PCE PCE-222 is a multi-function measurement device (light meter, thermometer, hygrometer, and sound level meter) with RS232 connectivity.
Voltcraft dl 160s.png
Nuvola Red.png
planned
The Voltcraft DL-160S is a sound level meter with USB connectivity.

Thermometers

Device Status Comments
EL-USB-2.png
Nuvola OK.png
supported
The Lascar Electronics EL-USB-2 is a USB-based temperature and humidity logger.
Pce pce-222 front.png
Nuvola Red.png
planned
The PCE PCE-222 is a multi-function measurement device (light meter, thermometer, hygrometer, and sound level meter) with RS232 connectivity.
Rding temper front.png
Nuvola Red.png
planned
The RDing TEMPer is a USB-based temperature logger.
Rding temper gold device front.png
Nuvola Red.png
planned
The RDing TEMPer Gold is a USB-based temperature logger.
Rding temper1 device front.png
Nuvola Red.png
planned
The RDing TEMPer1 is a USB-based temperature logger.
Pcsensor temper1k2 front.jpg
Nuvola Red.png
planned
The RDing TEMPer1K2 is a USB-based temperature logger.
Voltcraft dl-120th front.jpg
Nuvola Red.png
planned
The Voltcraft DL-120TH is a USB-based temperature logger.
Voltcraft dl-140th.png
Nuvola Red.png
planned
The Voltcraft DL-140TH is a USB-based temperature logger.
Uni-t ut325 front.png
Nuvola Red.png
planned
The UNI-T UT325 is a dual thermocouple logging thermometer.

Hygrometers

Device Status Comments
EL-USB-2.png
Nuvola OK.png
supported
The Lascar Electronics EL-USB-2 is a USB-based temperature and humidity logger.
Pce pce-222 front.png
Nuvola Red.png
planned
The PCE PCE-222 is a multi-function measurement device (light meter, thermometer, hygrometer, and sound level meter) with RS232 connectivity.

Anemometers

Device Status Comments
Mastech ms6252b device front.jpg
Nuvola Red.png
planned
The MASTECH MS6252B an anemometer with USB connectivity.

Light meters

Device Status Comments
Lutron YK-2005LX.png
Nuvola Red.png
planned
The Lutron YK-2005LX is a light meter with RS232 connectivity.
Pce pce-222 front.png
Nuvola Red.png
planned
The PCE PCE-222 is a multi-function measurement device (light meter, thermometer, hygrometer, and sound level meter) with RS232 connectivity.

Dataloggers

Device Status Comments
EL-USB-CO.png
Nuvola OK.png
supported
The Lascar Electronics EL-USB-CO is a standalone carbon monoxide (CO) logger.
Gsg indoor air monitor.png
Nuvola Red.png
planned
The GSG Indoor Air Monitor is a USB-based air quality monitor.
Maul studio i.png
Nuvola Red.png
planned
The MAUL studio i is an RS232-based weighing scale.
Voltcraft co-20 front.jpg
Nuvola Red.png
planned
The Voltcraft CO-20 is a USB-based air quality monitor.

Function generators

Device Status Comments
Hantek DDS-3X25 top.png
Nuvola Red.png
planned
The Hantek DDS-3X25 is a 25MHz PC-based function generator (requires a USB connection to work).
Siglent sdg1010 device front 8116.png
Nuvola Red.png
planned
The Siglent SDG1010 is a 10MHz function generator with USB connectivity.

Spectrum analyzers

TODO.

Power supplies

Device Status Comments
Manson hcs3202 front.jpg
Nuvola Red.png
planned
The Manson HCS-3202 is a 1-channel programmable power supply (1-36V/0-10A) with USB connectivity.

GPIB interfaces

Device Status Comments
Beiming s82357.png
Nuvola Red.png
planned
The Beiming S82357 is a USB-based, hardware-implemented GPIB interface (a clone of the Agilent 82357B USB/GPIB interface).
ICS 488-USB.png
Nuvola Red.png
planned
The ICS 488-USB is a USB-based, hardware-implemented GPIB interface.
GPIB-USB 82357B clone.png
Nuvola Red.png
planned
The GPIB-USB 82357B clone is a USB-based, hardware-implemented GPIB interface (a clone of the Agilent 82357B USB/GPIB interface).
NI GPIB-ENET.png
Nuvola Red.png
planned
The National Instruments GPIB-ENET is an Ethernet-based, hardware-implemented GPIB interface.
NI GPIB-USB-HS.png
Nuvola Red.png
planned
The National Instruments GPIB-USB-HS is a USB-based, hardware-implemented GPIB interface.
Prologix-usb.png
Nuvola Red.png
planned
The Prologix GPIB-USB is a USB-based, firmware-implemented GPIB interface.

Potential other candidates

If you own any other logic analyzers (or oscilloscopes, multimeters, dataloggers, etc.) and want to add support for them in sigrok (or donate/lend devices to developers), please let us know. We're always happy to add more hardware support! Contact Bert Vermeulen and Uwe Hermann if you want to help out.