]>
Commit | Line | Data |
---|---|---|
28a35d8a | 1 | /* |
50985c20 | 2 | * This file is part of the libsigrok project. |
28a35d8a | 3 | * |
868501fa | 4 | * Copyright (C) 2010-2012 Håvard Espeland <gus@ping.uio.no>, |
911f1834 UH |
5 | * Copyright (C) 2010 Martin Stensgård <mastensg@ping.uio.no> |
6 | * Copyright (C) 2010 Carl Henrik Lunde <chlunde@ping.uio.no> | |
28a35d8a HE |
7 | * |
8 | * This program is free software: you can redistribute it and/or modify | |
9 | * it under the terms of the GNU General Public License as published by | |
10 | * the Free Software Foundation, either version 3 of the License, or | |
11 | * (at your option) any later version. | |
12 | * | |
13 | * This program is distributed in the hope that it will be useful, | |
14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
16 | * GNU General Public License for more details. | |
17 | * | |
18 | * You should have received a copy of the GNU General Public License | |
19 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
20 | */ | |
21 | ||
911f1834 | 22 | /* |
6352d030 | 23 | * ASIX SIGMA/SIGMA2 logic analyzer driver |
911f1834 UH |
24 | */ |
25 | ||
6ec6c43b | 26 | #include <config.h> |
3bbd9849 UH |
27 | #include <glib.h> |
28 | #include <glib/gstdio.h> | |
28a35d8a HE |
29 | #include <ftdi.h> |
30 | #include <string.h> | |
e15e5873 | 31 | #include <unistd.h> |
c1aae900 | 32 | #include <libsigrok/libsigrok.h> |
45c59c8b | 33 | #include "libsigrok-internal.h" |
28a35d8a HE |
34 | #include "asix-sigma.h" |
35 | ||
36 | #define USB_VENDOR 0xa600 | |
37 | #define USB_PRODUCT 0xa000 | |
38 | #define USB_DESCRIPTION "ASIX SIGMA" | |
39 | #define USB_VENDOR_NAME "ASIX" | |
40 | #define USB_MODEL_NAME "SIGMA" | |
28a35d8a | 41 | |
ed300b9f | 42 | SR_PRIV struct sr_dev_driver asix_sigma_driver_info; |
6078d2c9 | 43 | static int dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data); |
28a35d8a | 44 | |
b1648dea MV |
45 | /* |
46 | * The ASIX Sigma supports arbitrary integer frequency divider in | |
47 | * the 50MHz mode. The divider is in range 1...256 , allowing for | |
48 | * very precise sampling rate selection. This driver supports only | |
49 | * a subset of the sampling rates. | |
50 | */ | |
2c9c0df8 | 51 | static const uint64_t samplerates[] = { |
b1648dea MV |
52 | SR_KHZ(200), /* div=250 */ |
53 | SR_KHZ(250), /* div=200 */ | |
54 | SR_KHZ(500), /* div=100 */ | |
55 | SR_MHZ(1), /* div=50 */ | |
56 | SR_MHZ(5), /* div=10 */ | |
57 | SR_MHZ(10), /* div=5 */ | |
58 | SR_MHZ(25), /* div=2 */ | |
59 | SR_MHZ(50), /* div=1 */ | |
60 | SR_MHZ(100), /* Special FW needed */ | |
61 | SR_MHZ(200), /* Special FW needed */ | |
28a35d8a HE |
62 | }; |
63 | ||
d261dbbf | 64 | /* |
ba7dd8bb | 65 | * Channel numbers seem to go from 1-16, according to this image: |
d261dbbf UH |
66 | * http://tools.asix.net/img/sigma_sigmacab_pins_720.jpg |
67 | * (the cable has two additional GND pins, and a TI and TO pin) | |
68 | */ | |
790c7ccc | 69 | static const char *channel_names[] = { |
78693401 UH |
70 | "1", "2", "3", "4", "5", "6", "7", "8", |
71 | "9", "10", "11", "12", "13", "14", "15", "16", | |
464d12c7 KS |
72 | }; |
73 | ||
2ff11e50 | 74 | static const uint32_t drvopts[] = { |
1953564a | 75 | SR_CONF_LOGIC_ANALYZER, |
e7ba5a99 BV |
76 | }; |
77 | ||
2ff11e50 BV |
78 | static const uint32_t devopts[] = { |
79 | SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET, | |
80 | SR_CONF_LIMIT_SAMPLES | SR_CONF_SET, | |
5827f61b BV |
81 | SR_CONF_SAMPLERATE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, |
82 | SR_CONF_TRIGGER_MATCH | SR_CONF_LIST, | |
83 | SR_CONF_CAPTURE_RATIO | SR_CONF_GET | SR_CONF_SET, | |
28a35d8a HE |
84 | }; |
85 | ||
39c64c6a BV |
86 | static const int32_t trigger_matches[] = { |
87 | SR_TRIGGER_ZERO, | |
88 | SR_TRIGGER_ONE, | |
89 | SR_TRIGGER_RISING, | |
90 | SR_TRIGGER_FALLING, | |
91 | }; | |
92 | ||
8e2d6c9d | 93 | static const char sigma_firmware_files[][24] = { |
499b17e9 | 94 | /* 50 MHz, supports 8 bit fractions */ |
8e2d6c9d | 95 | "asix-sigma-50.fw", |
499b17e9 | 96 | /* 100 MHz */ |
8e2d6c9d | 97 | "asix-sigma-100.fw", |
499b17e9 | 98 | /* 200 MHz */ |
8e2d6c9d | 99 | "asix-sigma-200.fw", |
499b17e9 | 100 | /* Synchronous clock from pin */ |
8e2d6c9d | 101 | "asix-sigma-50sync.fw", |
499b17e9 | 102 | /* Frequency counter */ |
8e2d6c9d | 103 | "asix-sigma-phasor.fw", |
f6564c8d HE |
104 | }; |
105 | ||
0e1357e8 | 106 | static int sigma_read(void *buf, size_t size, struct dev_context *devc) |
28a35d8a HE |
107 | { |
108 | int ret; | |
fefa1800 | 109 | |
0e1357e8 | 110 | ret = ftdi_read_data(&devc->ftdic, (unsigned char *)buf, size); |
28a35d8a | 111 | if (ret < 0) { |
47f4f073 | 112 | sr_err("ftdi_read_data failed: %s", |
0e1357e8 | 113 | ftdi_get_error_string(&devc->ftdic)); |
28a35d8a HE |
114 | } |
115 | ||
116 | return ret; | |
117 | } | |
118 | ||
0e1357e8 | 119 | static int sigma_write(void *buf, size_t size, struct dev_context *devc) |
28a35d8a HE |
120 | { |
121 | int ret; | |
fefa1800 | 122 | |
0e1357e8 | 123 | ret = ftdi_write_data(&devc->ftdic, (unsigned char *)buf, size); |
28a35d8a | 124 | if (ret < 0) { |
47f4f073 | 125 | sr_err("ftdi_write_data failed: %s", |
0e1357e8 | 126 | ftdi_get_error_string(&devc->ftdic)); |
fefa1800 | 127 | } else if ((size_t) ret != size) { |
47f4f073 | 128 | sr_err("ftdi_write_data did not complete write."); |
28a35d8a HE |
129 | } |
130 | ||
131 | return ret; | |
132 | } | |
133 | ||
e8686e3a AG |
134 | /* |
135 | * NOTE: We chose the buffer size to be large enough to hold any write to the | |
136 | * device. We still print a message just in case. | |
137 | */ | |
99965709 | 138 | static int sigma_write_register(uint8_t reg, uint8_t *data, size_t len, |
0e1357e8 | 139 | struct dev_context *devc) |
28a35d8a HE |
140 | { |
141 | size_t i; | |
e8686e3a | 142 | uint8_t buf[80]; |
28a35d8a HE |
143 | int idx = 0; |
144 | ||
e8686e3a AG |
145 | if ((len + 2) > sizeof(buf)) { |
146 | sr_err("Attempted to write %zu bytes, but buffer is too small.", | |
147 | len + 2); | |
148 | return SR_ERR_BUG; | |
149 | } | |
150 | ||
28a35d8a HE |
151 | buf[idx++] = REG_ADDR_LOW | (reg & 0xf); |
152 | buf[idx++] = REG_ADDR_HIGH | (reg >> 4); | |
153 | ||
fefa1800 | 154 | for (i = 0; i < len; ++i) { |
28a35d8a HE |
155 | buf[idx++] = REG_DATA_LOW | (data[i] & 0xf); |
156 | buf[idx++] = REG_DATA_HIGH_WRITE | (data[i] >> 4); | |
157 | } | |
158 | ||
0e1357e8 | 159 | return sigma_write(buf, idx, devc); |
28a35d8a HE |
160 | } |
161 | ||
0e1357e8 | 162 | static int sigma_set_register(uint8_t reg, uint8_t value, struct dev_context *devc) |
28a35d8a | 163 | { |
0e1357e8 | 164 | return sigma_write_register(reg, &value, 1, devc); |
28a35d8a HE |
165 | } |
166 | ||
99965709 | 167 | static int sigma_read_register(uint8_t reg, uint8_t *data, size_t len, |
0e1357e8 | 168 | struct dev_context *devc) |
28a35d8a HE |
169 | { |
170 | uint8_t buf[3]; | |
fefa1800 | 171 | |
28a35d8a HE |
172 | buf[0] = REG_ADDR_LOW | (reg & 0xf); |
173 | buf[1] = REG_ADDR_HIGH | (reg >> 4); | |
28a35d8a HE |
174 | buf[2] = REG_READ_ADDR; |
175 | ||
0e1357e8 | 176 | sigma_write(buf, sizeof(buf), devc); |
28a35d8a | 177 | |
0e1357e8 | 178 | return sigma_read(data, len, devc); |
28a35d8a HE |
179 | } |
180 | ||
0e1357e8 | 181 | static uint8_t sigma_get_register(uint8_t reg, struct dev_context *devc) |
28a35d8a HE |
182 | { |
183 | uint8_t value; | |
fefa1800 | 184 | |
0e1357e8 | 185 | if (1 != sigma_read_register(reg, &value, 1, devc)) { |
47f4f073 | 186 | sr_err("sigma_get_register: 1 byte expected"); |
28a35d8a HE |
187 | return 0; |
188 | } | |
189 | ||
190 | return value; | |
191 | } | |
192 | ||
99965709 | 193 | static int sigma_read_pos(uint32_t *stoppos, uint32_t *triggerpos, |
0e1357e8 | 194 | struct dev_context *devc) |
28a35d8a HE |
195 | { |
196 | uint8_t buf[] = { | |
197 | REG_ADDR_LOW | READ_TRIGGER_POS_LOW, | |
198 | ||
199 | REG_READ_ADDR | NEXT_REG, | |
200 | REG_READ_ADDR | NEXT_REG, | |
201 | REG_READ_ADDR | NEXT_REG, | |
202 | REG_READ_ADDR | NEXT_REG, | |
203 | REG_READ_ADDR | NEXT_REG, | |
204 | REG_READ_ADDR | NEXT_REG, | |
205 | }; | |
28a35d8a HE |
206 | uint8_t result[6]; |
207 | ||
0e1357e8 | 208 | sigma_write(buf, sizeof(buf), devc); |
28a35d8a | 209 | |
0e1357e8 | 210 | sigma_read(result, sizeof(result), devc); |
28a35d8a HE |
211 | |
212 | *triggerpos = result[0] | (result[1] << 8) | (result[2] << 16); | |
213 | *stoppos = result[3] | (result[4] << 8) | (result[5] << 16); | |
214 | ||
57bbf56b HE |
215 | /* Not really sure why this must be done, but according to spec. */ |
216 | if ((--*stoppos & 0x1ff) == 0x1ff) | |
382cb19f | 217 | *stoppos -= 64; |
57bbf56b HE |
218 | |
219 | if ((*--triggerpos & 0x1ff) == 0x1ff) | |
382cb19f | 220 | *triggerpos -= 64; |
57bbf56b | 221 | |
28a35d8a HE |
222 | return 1; |
223 | } | |
224 | ||
99965709 | 225 | static int sigma_read_dram(uint16_t startchunk, size_t numchunks, |
0e1357e8 | 226 | uint8_t *data, struct dev_context *devc) |
28a35d8a HE |
227 | { |
228 | size_t i; | |
229 | uint8_t buf[4096]; | |
230 | int idx = 0; | |
231 | ||
fefa1800 | 232 | /* Send the startchunk. Index start with 1. */ |
28a35d8a HE |
233 | buf[0] = startchunk >> 8; |
234 | buf[1] = startchunk & 0xff; | |
0e1357e8 | 235 | sigma_write_register(WRITE_MEMROW, buf, 2, devc); |
28a35d8a | 236 | |
fefa1800 | 237 | /* Read the DRAM. */ |
28a35d8a HE |
238 | buf[idx++] = REG_DRAM_BLOCK; |
239 | buf[idx++] = REG_DRAM_WAIT_ACK; | |
240 | ||
241 | for (i = 0; i < numchunks; ++i) { | |
fefa1800 UH |
242 | /* Alternate bit to copy from DRAM to cache. */ |
243 | if (i != (numchunks - 1)) | |
244 | buf[idx++] = REG_DRAM_BLOCK | (((i + 1) % 2) << 4); | |
28a35d8a HE |
245 | |
246 | buf[idx++] = REG_DRAM_BLOCK_DATA | ((i % 2) << 4); | |
247 | ||
fefa1800 | 248 | if (i != (numchunks - 1)) |
28a35d8a HE |
249 | buf[idx++] = REG_DRAM_WAIT_ACK; |
250 | } | |
251 | ||
0e1357e8 | 252 | sigma_write(buf, idx, devc); |
28a35d8a | 253 | |
0e1357e8 | 254 | return sigma_read(data, numchunks * CHUNK_SIZE, devc); |
28a35d8a HE |
255 | } |
256 | ||
4ae1f451 | 257 | /* Upload trigger look-up tables to Sigma. */ |
0e1357e8 | 258 | static int sigma_write_trigger_lut(struct triggerlut *lut, struct dev_context *devc) |
ee492173 HE |
259 | { |
260 | int i; | |
261 | uint8_t tmp[2]; | |
262 | uint16_t bit; | |
263 | ||
264 | /* Transpose the table and send to Sigma. */ | |
265 | for (i = 0; i < 16; ++i) { | |
266 | bit = 1 << i; | |
267 | ||
268 | tmp[0] = tmp[1] = 0; | |
269 | ||
270 | if (lut->m2d[0] & bit) | |
271 | tmp[0] |= 0x01; | |
272 | if (lut->m2d[1] & bit) | |
273 | tmp[0] |= 0x02; | |
274 | if (lut->m2d[2] & bit) | |
275 | tmp[0] |= 0x04; | |
276 | if (lut->m2d[3] & bit) | |
277 | tmp[0] |= 0x08; | |
278 | ||
279 | if (lut->m3 & bit) | |
280 | tmp[0] |= 0x10; | |
281 | if (lut->m3s & bit) | |
282 | tmp[0] |= 0x20; | |
283 | if (lut->m4 & bit) | |
284 | tmp[0] |= 0x40; | |
285 | ||
286 | if (lut->m0d[0] & bit) | |
287 | tmp[1] |= 0x01; | |
288 | if (lut->m0d[1] & bit) | |
289 | tmp[1] |= 0x02; | |
290 | if (lut->m0d[2] & bit) | |
291 | tmp[1] |= 0x04; | |
292 | if (lut->m0d[3] & bit) | |
293 | tmp[1] |= 0x08; | |
294 | ||
295 | if (lut->m1d[0] & bit) | |
296 | tmp[1] |= 0x10; | |
297 | if (lut->m1d[1] & bit) | |
298 | tmp[1] |= 0x20; | |
299 | if (lut->m1d[2] & bit) | |
300 | tmp[1] |= 0x40; | |
301 | if (lut->m1d[3] & bit) | |
302 | tmp[1] |= 0x80; | |
303 | ||
99965709 | 304 | sigma_write_register(WRITE_TRIGGER_SELECT0, tmp, sizeof(tmp), |
0e1357e8 BV |
305 | devc); |
306 | sigma_set_register(WRITE_TRIGGER_SELECT1, 0x30 | i, devc); | |
ee492173 HE |
307 | } |
308 | ||
309 | /* Send the parameters */ | |
310 | sigma_write_register(WRITE_TRIGGER_SELECT0, (uint8_t *) &lut->params, | |
0e1357e8 | 311 | sizeof(lut->params), devc); |
ee492173 | 312 | |
e46b8fb1 | 313 | return SR_OK; |
ee492173 HE |
314 | } |
315 | ||
3678cf73 | 316 | static void clear_helper(void *priv) |
0448d110 | 317 | { |
0e1357e8 | 318 | struct dev_context *devc; |
ce4d26dd | 319 | |
3678cf73 | 320 | devc = priv; |
0e1357e8 | 321 | |
3678cf73 UH |
322 | ftdi_deinit(&devc->ftdic); |
323 | } | |
0448d110 | 324 | |
4f840ce9 | 325 | static int dev_clear(const struct sr_dev_driver *di) |
3678cf73 UH |
326 | { |
327 | return std_dev_clear(di, clear_helper); | |
0448d110 BV |
328 | } |
329 | ||
4f840ce9 | 330 | static int init(struct sr_dev_driver *di, struct sr_context *sr_ctx) |
61136ea6 | 331 | { |
f6beaac5 | 332 | return std_init(sr_ctx, di, LOG_PREFIX); |
61136ea6 BV |
333 | } |
334 | ||
4f840ce9 | 335 | static GSList *scan(struct sr_dev_driver *di, GSList *options) |
28a35d8a | 336 | { |
d68e2d1a | 337 | struct sr_dev_inst *sdi; |
0e1357e8 BV |
338 | struct drv_context *drvc; |
339 | struct dev_context *devc; | |
0448d110 | 340 | GSList *devices; |
e3fff420 HE |
341 | struct ftdi_device_list *devlist; |
342 | char serial_txt[10]; | |
343 | uint32_t serial; | |
790c7ccc MV |
344 | int ret; |
345 | unsigned int i; | |
28a35d8a | 346 | |
0448d110 | 347 | (void)options; |
64d33dc2 | 348 | |
41812aca | 349 | drvc = di->context; |
4b97c74e | 350 | |
0448d110 | 351 | devices = NULL; |
4b97c74e | 352 | |
f57d8ffe | 353 | devc = g_malloc0(sizeof(struct dev_context)); |
99965709 | 354 | |
0e1357e8 | 355 | ftdi_init(&devc->ftdic); |
28a35d8a | 356 | |
fefa1800 | 357 | /* Look for SIGMAs. */ |
e3fff420 | 358 | |
0e1357e8 | 359 | if ((ret = ftdi_usb_find_all(&devc->ftdic, &devlist, |
eec944c5 BV |
360 | USB_VENDOR, USB_PRODUCT)) <= 0) { |
361 | if (ret < 0) | |
362 | sr_err("ftdi_usb_find_all(): %d", ret); | |
99965709 | 363 | goto free; |
eec944c5 | 364 | } |
99965709 | 365 | |
e3fff420 | 366 | /* Make sure it's a version 1 or 2 SIGMA. */ |
0e1357e8 | 367 | ftdi_usb_get_strings(&devc->ftdic, devlist->dev, NULL, 0, NULL, 0, |
6352d030 | 368 | serial_txt, sizeof(serial_txt)); |
e3fff420 HE |
369 | sscanf(serial_txt, "%x", &serial); |
370 | ||
6352d030 | 371 | if (serial < 0xa6010000 || serial > 0xa602ffff) { |
47f4f073 UH |
372 | sr_err("Only SIGMA and SIGMA2 are supported " |
373 | "in this version of libsigrok."); | |
e3fff420 HE |
374 | goto free; |
375 | } | |
376 | ||
377 | sr_info("Found ASIX SIGMA - Serial: %s", serial_txt); | |
378 | ||
23b886bc | 379 | devc->cur_samplerate = samplerates[0]; |
0e1357e8 BV |
380 | devc->period_ps = 0; |
381 | devc->limit_msec = 0; | |
382 | devc->cur_firmware = -1; | |
ba7dd8bb | 383 | devc->num_channels = 0; |
0e1357e8 BV |
384 | devc->samples_per_event = 0; |
385 | devc->capture_ratio = 50; | |
386 | devc->use_triggers = 0; | |
28a35d8a | 387 | |
fefa1800 | 388 | /* Register SIGMA device. */ |
aac29cc1 | 389 | sdi = g_malloc0(sizeof(struct sr_dev_inst)); |
0af636be UH |
390 | sdi->status = SR_ST_INITIALIZING; |
391 | sdi->vendor = g_strdup(USB_VENDOR_NAME); | |
392 | sdi->model = g_strdup(USB_MODEL_NAME); | |
a873c594 | 393 | sdi->driver = di; |
87ca93c5 | 394 | |
5e23fcab | 395 | for (i = 0; i < ARRAY_SIZE(channel_names); i++) |
0f34cb47 | 396 | sr_channel_new(sdi, i, SR_CHANNEL_LOGIC, TRUE, channel_names[i]); |
87ca93c5 | 397 | |
0448d110 | 398 | devices = g_slist_append(devices, sdi); |
0e1357e8 BV |
399 | drvc->instances = g_slist_append(drvc->instances, sdi); |
400 | sdi->priv = devc; | |
28a35d8a | 401 | |
fefa1800 | 402 | /* We will open the device again when we need it. */ |
e3fff420 | 403 | ftdi_list_free(&devlist); |
28a35d8a | 404 | |
0448d110 | 405 | return devices; |
ea9cfed7 | 406 | |
99965709 | 407 | free: |
0e1357e8 BV |
408 | ftdi_deinit(&devc->ftdic); |
409 | g_free(devc); | |
0448d110 | 410 | return NULL; |
28a35d8a HE |
411 | } |
412 | ||
4f840ce9 | 413 | static GSList *dev_list(const struct sr_dev_driver *di) |
811deee4 | 414 | { |
41812aca | 415 | return ((struct drv_context *)(di->context))->instances; |
811deee4 BV |
416 | } |
417 | ||
d5fa188a MV |
418 | /* |
419 | * Configure the FPGA for bitbang mode. | |
420 | * This sequence is documented in section 2. of the ASIX Sigma programming | |
421 | * manual. This sequence is necessary to configure the FPGA in the Sigma | |
422 | * into Bitbang mode, in which it can be programmed with the firmware. | |
423 | */ | |
424 | static int sigma_fpga_init_bitbang(struct dev_context *devc) | |
425 | { | |
426 | uint8_t suicide[] = { | |
427 | 0x84, 0x84, 0x88, 0x84, 0x88, 0x84, 0x88, 0x84, | |
428 | }; | |
429 | uint8_t init_array[] = { | |
430 | 0x01, 0x03, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01, | |
431 | 0x01, 0x01, | |
432 | }; | |
1a46cc62 | 433 | int i, ret, timeout = (10 * 1000); |
d5fa188a MV |
434 | uint8_t data; |
435 | ||
436 | /* Section 2. part 1), do the FPGA suicide. */ | |
437 | sigma_write(suicide, sizeof(suicide), devc); | |
438 | sigma_write(suicide, sizeof(suicide), devc); | |
439 | sigma_write(suicide, sizeof(suicide), devc); | |
440 | sigma_write(suicide, sizeof(suicide), devc); | |
441 | ||
442 | /* Section 2. part 2), do pulse on D1. */ | |
443 | sigma_write(init_array, sizeof(init_array), devc); | |
444 | ftdi_usb_purge_buffers(&devc->ftdic); | |
445 | ||
446 | /* Wait until the FPGA asserts D6/INIT_B. */ | |
447 | for (i = 0; i < timeout; i++) { | |
448 | ret = sigma_read(&data, 1, devc); | |
449 | if (ret < 0) | |
450 | return ret; | |
451 | /* Test if pin D6 got asserted. */ | |
452 | if (data & (1 << 5)) | |
453 | return 0; | |
454 | /* The D6 was not asserted yet, wait a bit. */ | |
1a46cc62 | 455 | g_usleep(10 * 1000); |
d5fa188a MV |
456 | } |
457 | ||
458 | return SR_ERR_TIMEOUT; | |
459 | } | |
460 | ||
64fe661b MV |
461 | /* |
462 | * Configure the FPGA for logic-analyzer mode. | |
463 | */ | |
464 | static int sigma_fpga_init_la(struct dev_context *devc) | |
465 | { | |
466 | /* Initialize the logic analyzer mode. */ | |
467 | uint8_t logic_mode_start[] = { | |
011f1091 MV |
468 | REG_ADDR_LOW | (READ_ID & 0xf), |
469 | REG_ADDR_HIGH | (READ_ID >> 8), | |
470 | REG_READ_ADDR, /* Read ID register. */ | |
471 | ||
472 | REG_ADDR_LOW | (WRITE_TEST & 0xf), | |
473 | REG_DATA_LOW | 0x5, | |
474 | REG_DATA_HIGH_WRITE | 0x5, | |
475 | REG_READ_ADDR, /* Read scratch register. */ | |
476 | ||
477 | REG_DATA_LOW | 0xa, | |
478 | REG_DATA_HIGH_WRITE | 0xa, | |
479 | REG_READ_ADDR, /* Read scratch register. */ | |
480 | ||
481 | REG_ADDR_LOW | (WRITE_MODE & 0xf), | |
482 | REG_DATA_LOW | 0x0, | |
483 | REG_DATA_HIGH_WRITE | 0x8, | |
64fe661b MV |
484 | }; |
485 | ||
486 | uint8_t result[3]; | |
487 | int ret; | |
488 | ||
489 | /* Initialize the logic analyzer mode. */ | |
490 | sigma_write(logic_mode_start, sizeof(logic_mode_start), devc); | |
491 | ||
011f1091 | 492 | /* Expect a 3 byte reply since we issued three READ requests. */ |
64fe661b MV |
493 | ret = sigma_read(result, 3, devc); |
494 | if (ret != 3) | |
495 | goto err; | |
496 | ||
497 | if (result[0] != 0xa6 || result[1] != 0x55 || result[2] != 0xaa) | |
498 | goto err; | |
499 | ||
500 | return SR_OK; | |
501 | err: | |
502 | sr_err("Configuration failed. Invalid reply received."); | |
503 | return SR_ERR; | |
504 | } | |
505 | ||
a80226bb MV |
506 | /* |
507 | * Read the firmware from a file and transform it into a series of bitbang | |
508 | * pulses used to program the FPGA. Note that the *bb_cmd must be free()'d | |
509 | * by the caller of this function. | |
510 | */ | |
8e2d6c9d | 511 | static int sigma_fw_2_bitbang(struct sr_context *ctx, const char *name, |
a80226bb MV |
512 | uint8_t **bb_cmd, gsize *bb_cmd_size) |
513 | { | |
8e2d6c9d DE |
514 | size_t i, file_size, bb_size; |
515 | char *firmware; | |
a80226bb MV |
516 | uint8_t *bb_stream, *bbs; |
517 | uint32_t imm; | |
518 | int bit, v; | |
519 | int ret = SR_OK; | |
520 | ||
8e2d6c9d DE |
521 | firmware = sr_resource_load(ctx, SR_RESOURCE_FIRMWARE, |
522 | name, &file_size, 256 * 1024); | |
523 | if (!firmware) | |
524 | return SR_ERR; | |
a80226bb MV |
525 | |
526 | /* Weird magic transformation below, I have no idea what it does. */ | |
527 | imm = 0x3f6df2ab; | |
528 | for (i = 0; i < file_size; i++) { | |
529 | imm = (imm + 0xa853753) % 177 + (imm * 0x8034052); | |
530 | firmware[i] ^= imm & 0xff; | |
531 | } | |
532 | ||
533 | /* | |
534 | * Now that the firmware is "transformed", we will transcribe the | |
535 | * firmware blob into a sequence of toggles of the Dx wires. This | |
536 | * sequence will be fed directly into the Sigma, which must be in | |
537 | * the FPGA bitbang programming mode. | |
538 | */ | |
539 | ||
540 | /* Each bit of firmware is transcribed as two toggles of Dx wires. */ | |
541 | bb_size = file_size * 8 * 2; | |
542 | bb_stream = (uint8_t *)g_try_malloc(bb_size); | |
543 | if (!bb_stream) { | |
544 | sr_err("%s: Failed to allocate bitbang stream", __func__); | |
545 | ret = SR_ERR_MALLOC; | |
546 | goto exit; | |
547 | } | |
548 | ||
549 | bbs = bb_stream; | |
550 | for (i = 0; i < file_size; i++) { | |
551 | for (bit = 7; bit >= 0; bit--) { | |
552 | v = (firmware[i] & (1 << bit)) ? 0x40 : 0x00; | |
553 | *bbs++ = v | 0x01; | |
554 | *bbs++ = v; | |
555 | } | |
556 | } | |
557 | ||
558 | /* The transformation completed successfully, return the result. */ | |
559 | *bb_cmd = bb_stream; | |
560 | *bb_cmd_size = bb_size; | |
561 | ||
562 | exit: | |
8e2d6c9d | 563 | g_free(firmware); |
a80226bb MV |
564 | return ret; |
565 | } | |
566 | ||
8e2d6c9d DE |
567 | static int upload_firmware(struct sr_context *ctx, |
568 | int firmware_idx, struct dev_context *devc) | |
28a35d8a HE |
569 | { |
570 | int ret; | |
571 | unsigned char *buf; | |
572 | unsigned char pins; | |
573 | size_t buf_size; | |
499b17e9 | 574 | const char *firmware = sigma_firmware_files[firmware_idx]; |
8bbf7627 | 575 | struct ftdi_context *ftdic = &devc->ftdic; |
28a35d8a | 576 | |
fefa1800 | 577 | /* Make sure it's an ASIX SIGMA. */ |
8bbf7627 MV |
578 | ret = ftdi_usb_open_desc(ftdic, USB_VENDOR, USB_PRODUCT, |
579 | USB_DESCRIPTION, NULL); | |
580 | if (ret < 0) { | |
47f4f073 | 581 | sr_err("ftdi_usb_open failed: %s", |
8bbf7627 | 582 | ftdi_get_error_string(ftdic)); |
28a35d8a HE |
583 | return 0; |
584 | } | |
585 | ||
8bbf7627 MV |
586 | ret = ftdi_set_bitmode(ftdic, 0xdf, BITMODE_BITBANG); |
587 | if (ret < 0) { | |
47f4f073 | 588 | sr_err("ftdi_set_bitmode failed: %s", |
8bbf7627 | 589 | ftdi_get_error_string(ftdic)); |
28a35d8a HE |
590 | return 0; |
591 | } | |
592 | ||
fefa1800 | 593 | /* Four times the speed of sigmalogan - Works well. */ |
1a46cc62 | 594 | ret = ftdi_set_baudrate(ftdic, 750 * 1000); |
8bbf7627 | 595 | if (ret < 0) { |
47f4f073 | 596 | sr_err("ftdi_set_baudrate failed: %s", |
8bbf7627 | 597 | ftdi_get_error_string(ftdic)); |
28a35d8a HE |
598 | return 0; |
599 | } | |
600 | ||
d5fa188a MV |
601 | /* Initialize the FPGA for firmware upload. */ |
602 | ret = sigma_fpga_init_bitbang(devc); | |
603 | if (ret) | |
604 | return ret; | |
28a35d8a | 605 | |
9ddb2a12 | 606 | /* Prepare firmware. */ |
8e2d6c9d | 607 | ret = sigma_fw_2_bitbang(ctx, firmware, &buf, &buf_size); |
8bbf7627 | 608 | if (ret != SR_OK) { |
f3f19d11 | 609 | sr_err("An error occurred while reading the firmware: %s", |
499b17e9 | 610 | firmware); |
b53738ba | 611 | return ret; |
28a35d8a HE |
612 | } |
613 | ||
f3f19d11 | 614 | /* Upload firmware. */ |
499b17e9 | 615 | sr_info("Uploading firmware file '%s'.", firmware); |
0e1357e8 | 616 | sigma_write(buf, buf_size, devc); |
28a35d8a HE |
617 | |
618 | g_free(buf); | |
619 | ||
8bbf7627 MV |
620 | ret = ftdi_set_bitmode(ftdic, 0x00, BITMODE_RESET); |
621 | if (ret < 0) { | |
47f4f073 | 622 | sr_err("ftdi_set_bitmode failed: %s", |
8bbf7627 | 623 | ftdi_get_error_string(ftdic)); |
e46b8fb1 | 624 | return SR_ERR; |
28a35d8a HE |
625 | } |
626 | ||
8bbf7627 | 627 | ftdi_usb_purge_buffers(ftdic); |
28a35d8a | 628 | |
fefa1800 | 629 | /* Discard garbage. */ |
29b66a2e | 630 | while (sigma_read(&pins, 1, devc) == 1) |
28a35d8a HE |
631 | ; |
632 | ||
64fe661b MV |
633 | /* Initialize the FPGA for logic-analyzer mode. */ |
634 | ret = sigma_fpga_init_la(devc); | |
635 | if (ret != SR_OK) | |
636 | return ret; | |
28a35d8a | 637 | |
0e1357e8 | 638 | devc->cur_firmware = firmware_idx; |
f6564c8d | 639 | |
47f4f073 | 640 | sr_info("Firmware uploaded."); |
e3fff420 | 641 | |
e46b8fb1 | 642 | return SR_OK; |
f6564c8d HE |
643 | } |
644 | ||
6078d2c9 | 645 | static int dev_open(struct sr_dev_inst *sdi) |
f6564c8d | 646 | { |
0e1357e8 | 647 | struct dev_context *devc; |
f6564c8d HE |
648 | int ret; |
649 | ||
0e1357e8 | 650 | devc = sdi->priv; |
99965709 | 651 | |
9ddb2a12 | 652 | /* Make sure it's an ASIX SIGMA. */ |
0e1357e8 | 653 | if ((ret = ftdi_usb_open_desc(&devc->ftdic, |
f6564c8d HE |
654 | USB_VENDOR, USB_PRODUCT, USB_DESCRIPTION, NULL)) < 0) { |
655 | ||
47f4f073 | 656 | sr_err("ftdi_usb_open failed: %s", |
0e1357e8 | 657 | ftdi_get_error_string(&devc->ftdic)); |
f6564c8d HE |
658 | |
659 | return 0; | |
660 | } | |
28a35d8a | 661 | |
5a2326a7 | 662 | sdi->status = SR_ST_ACTIVE; |
28a35d8a | 663 | |
e46b8fb1 | 664 | return SR_OK; |
f6564c8d HE |
665 | } |
666 | ||
6f4b1868 | 667 | static int set_samplerate(const struct sr_dev_inst *sdi, uint64_t samplerate) |
f6564c8d | 668 | { |
2c9c0df8 | 669 | struct dev_context *devc; |
8e2d6c9d | 670 | struct drv_context *drvc; |
2c9c0df8 BV |
671 | unsigned int i; |
672 | int ret; | |
f6564c8d | 673 | |
2c9c0df8 | 674 | devc = sdi->priv; |
8e2d6c9d | 675 | drvc = sdi->driver->context; |
f4abaa9f UH |
676 | ret = SR_OK; |
677 | ||
2c9c0df8 BV |
678 | for (i = 0; i < ARRAY_SIZE(samplerates); i++) { |
679 | if (samplerates[i] == samplerate) | |
f6564c8d HE |
680 | break; |
681 | } | |
2c9c0df8 | 682 | if (samplerates[i] == 0) |
e46b8fb1 | 683 | return SR_ERR_SAMPLERATE; |
f6564c8d | 684 | |
59df0c77 | 685 | if (samplerate <= SR_MHZ(50)) { |
8e2d6c9d | 686 | ret = upload_firmware(drvc->sr_ctx, 0, devc); |
ba7dd8bb | 687 | devc->num_channels = 16; |
6b2d3385 | 688 | } else if (samplerate == SR_MHZ(100)) { |
8e2d6c9d | 689 | ret = upload_firmware(drvc->sr_ctx, 1, devc); |
ba7dd8bb | 690 | devc->num_channels = 8; |
6b2d3385 | 691 | } else if (samplerate == SR_MHZ(200)) { |
8e2d6c9d | 692 | ret = upload_firmware(drvc->sr_ctx, 2, devc); |
ba7dd8bb | 693 | devc->num_channels = 4; |
f78898e9 | 694 | } |
f6564c8d | 695 | |
6b2d3385 BV |
696 | if (ret == SR_OK) { |
697 | devc->cur_samplerate = samplerate; | |
698 | devc->period_ps = 1000000000000ULL / samplerate; | |
699 | devc->samples_per_event = 16 / devc->num_channels; | |
700 | devc->state.state = SIGMA_IDLE; | |
701 | } | |
f6564c8d | 702 | |
e8397563 | 703 | return ret; |
28a35d8a HE |
704 | } |
705 | ||
c53d793f HE |
706 | /* |
707 | * In 100 and 200 MHz mode, only a single pin rising/falling can be | |
708 | * set as trigger. In other modes, two rising/falling triggers can be set, | |
ba7dd8bb | 709 | * in addition to value/mask trigger for any number of channels. |
c53d793f HE |
710 | * |
711 | * The Sigma supports complex triggers using boolean expressions, but this | |
712 | * has not been implemented yet. | |
713 | */ | |
39c64c6a | 714 | static int convert_trigger(const struct sr_dev_inst *sdi) |
57bbf56b | 715 | { |
39c64c6a BV |
716 | struct dev_context *devc; |
717 | struct sr_trigger *trigger; | |
718 | struct sr_trigger_stage *stage; | |
719 | struct sr_trigger_match *match; | |
720 | const GSList *l, *m; | |
721 | int channelbit, trigger_set; | |
57bbf56b | 722 | |
39c64c6a | 723 | devc = sdi->priv; |
0e1357e8 | 724 | memset(&devc->trigger, 0, sizeof(struct sigma_trigger)); |
0812c40e | 725 | if (!(trigger = sr_session_trigger_get(sdi->session))) |
39c64c6a BV |
726 | return SR_OK; |
727 | ||
728 | trigger_set = 0; | |
729 | for (l = trigger->stages; l; l = l->next) { | |
730 | stage = l->data; | |
731 | for (m = stage->matches; m; m = m->next) { | |
732 | match = m->data; | |
733 | if (!match->channel->enabled) | |
734 | /* Ignore disabled channels with a trigger. */ | |
735 | continue; | |
736 | channelbit = 1 << (match->channel->index); | |
737 | if (devc->cur_samplerate >= SR_MHZ(100)) { | |
738 | /* Fast trigger support. */ | |
739 | if (trigger_set) { | |
740 | sr_err("Only a single pin trigger is " | |
741 | "supported in 100 and 200MHz mode."); | |
742 | return SR_ERR; | |
743 | } | |
744 | if (match->match == SR_TRIGGER_FALLING) | |
745 | devc->trigger.fallingmask |= channelbit; | |
746 | else if (match->match == SR_TRIGGER_RISING) | |
747 | devc->trigger.risingmask |= channelbit; | |
748 | else { | |
749 | sr_err("Only rising/falling trigger is " | |
750 | "supported in 100 and 200MHz mode."); | |
751 | return SR_ERR; | |
752 | } | |
eec5275e | 753 | |
c53d793f | 754 | ++trigger_set; |
39c64c6a BV |
755 | } else { |
756 | /* Simple trigger support (event). */ | |
757 | if (match->match == SR_TRIGGER_ONE) { | |
758 | devc->trigger.simplevalue |= channelbit; | |
759 | devc->trigger.simplemask |= channelbit; | |
760 | } | |
761 | else if (match->match == SR_TRIGGER_ZERO) { | |
762 | devc->trigger.simplevalue &= ~channelbit; | |
763 | devc->trigger.simplemask |= channelbit; | |
764 | } | |
765 | else if (match->match == SR_TRIGGER_FALLING) { | |
766 | devc->trigger.fallingmask |= channelbit; | |
767 | ++trigger_set; | |
768 | } | |
769 | else if (match->match == SR_TRIGGER_RISING) { | |
770 | devc->trigger.risingmask |= channelbit; | |
771 | ++trigger_set; | |
772 | } | |
773 | ||
774 | /* | |
775 | * Actually, Sigma supports 2 rising/falling triggers, | |
776 | * but they are ORed and the current trigger syntax | |
777 | * does not permit ORed triggers. | |
778 | */ | |
779 | if (trigger_set > 1) { | |
780 | sr_err("Only 1 rising/falling trigger " | |
781 | "is supported."); | |
782 | return SR_ERR; | |
783 | } | |
ee492173 | 784 | } |
ee492173 | 785 | } |
57bbf56b HE |
786 | } |
787 | ||
e46b8fb1 | 788 | return SR_OK; |
57bbf56b HE |
789 | } |
790 | ||
6078d2c9 | 791 | static int dev_close(struct sr_dev_inst *sdi) |
28a35d8a | 792 | { |
0e1357e8 | 793 | struct dev_context *devc; |
28a35d8a | 794 | |
961009b0 | 795 | devc = sdi->priv; |
697785d1 UH |
796 | |
797 | /* TODO */ | |
798 | if (sdi->status == SR_ST_ACTIVE) | |
0e1357e8 | 799 | ftdi_usb_close(&devc->ftdic); |
697785d1 UH |
800 | |
801 | sdi->status = SR_ST_INACTIVE; | |
802 | ||
803 | return SR_OK; | |
28a35d8a HE |
804 | } |
805 | ||
4f840ce9 | 806 | static int cleanup(const struct sr_dev_driver *di) |
28a35d8a | 807 | { |
4f840ce9 | 808 | return dev_clear(di); |
28a35d8a HE |
809 | } |
810 | ||
584560f1 | 811 | static int config_get(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi, |
53b4680f | 812 | const struct sr_channel_group *cg) |
28a35d8a | 813 | { |
0e1357e8 | 814 | struct dev_context *devc; |
99965709 | 815 | |
53b4680f | 816 | (void)cg; |
8f996b89 | 817 | |
fb2e6de7 BV |
818 | if (!sdi) |
819 | return SR_ERR; | |
820 | devc = sdi->priv; | |
821 | ||
584560f1 | 822 | switch (key) { |
123e1313 | 823 | case SR_CONF_SAMPLERATE: |
fb2e6de7 BV |
824 | *data = g_variant_new_uint64(devc->cur_samplerate); |
825 | break; | |
826 | case SR_CONF_LIMIT_MSEC: | |
827 | *data = g_variant_new_uint64(devc->limit_msec); | |
828 | break; | |
829 | case SR_CONF_CAPTURE_RATIO: | |
830 | *data = g_variant_new_uint64(devc->capture_ratio); | |
28a35d8a | 831 | break; |
d7bbecfd | 832 | default: |
bd6fbf62 | 833 | return SR_ERR_NA; |
28a35d8a HE |
834 | } |
835 | ||
41479605 | 836 | return SR_OK; |
28a35d8a HE |
837 | } |
838 | ||
584560f1 | 839 | static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sdi, |
53b4680f | 840 | const struct sr_channel_group *cg) |
28a35d8a | 841 | { |
0e1357e8 | 842 | struct dev_context *devc; |
6b2d3385 BV |
843 | uint64_t tmp; |
844 | int ret; | |
f6564c8d | 845 | |
53b4680f | 846 | (void)cg; |
8f996b89 | 847 | |
e73ffd42 BV |
848 | if (sdi->status != SR_ST_ACTIVE) |
849 | return SR_ERR_DEV_CLOSED; | |
850 | ||
0e1357e8 | 851 | devc = sdi->priv; |
99965709 | 852 | |
6b2d3385 | 853 | ret = SR_OK; |
584560f1 | 854 | switch (key) { |
6868626b | 855 | case SR_CONF_SAMPLERATE: |
2c9c0df8 | 856 | ret = set_samplerate(sdi, g_variant_get_uint64(data)); |
6868626b BV |
857 | break; |
858 | case SR_CONF_LIMIT_MSEC: | |
6b2d3385 BV |
859 | tmp = g_variant_get_uint64(data); |
860 | if (tmp > 0) | |
861 | devc->limit_msec = g_variant_get_uint64(data); | |
94ba4bd6 | 862 | else |
e46b8fb1 | 863 | ret = SR_ERR; |
6868626b BV |
864 | break; |
865 | case SR_CONF_LIMIT_SAMPLES: | |
6b2d3385 BV |
866 | tmp = g_variant_get_uint64(data); |
867 | devc->limit_msec = tmp * 1000 / devc->cur_samplerate; | |
6868626b BV |
868 | break; |
869 | case SR_CONF_CAPTURE_RATIO: | |
6b2d3385 BV |
870 | tmp = g_variant_get_uint64(data); |
871 | if (tmp <= 100) | |
872 | devc->capture_ratio = tmp; | |
94ba4bd6 | 873 | else |
6b2d3385 | 874 | ret = SR_ERR; |
6868626b BV |
875 | break; |
876 | default: | |
bd6fbf62 | 877 | ret = SR_ERR_NA; |
28a35d8a HE |
878 | } |
879 | ||
880 | return ret; | |
881 | } | |
882 | ||
584560f1 | 883 | static int config_list(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi, |
53b4680f | 884 | const struct sr_channel_group *cg) |
a1c743fc | 885 | { |
2c9c0df8 BV |
886 | GVariant *gvar; |
887 | GVariantBuilder gvb; | |
a1c743fc | 888 | |
53b4680f | 889 | (void)cg; |
a1c743fc BV |
890 | |
891 | switch (key) { | |
9a6517d1 | 892 | case SR_CONF_DEVICE_OPTIONS: |
e7ba5a99 BV |
893 | if (!sdi) |
894 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32, | |
2ff11e50 | 895 | drvopts, ARRAY_SIZE(drvopts), sizeof(uint32_t)); |
e7ba5a99 BV |
896 | else |
897 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32, | |
2ff11e50 | 898 | devopts, ARRAY_SIZE(devopts), sizeof(uint32_t)); |
9a6517d1 | 899 | break; |
a1c743fc | 900 | case SR_CONF_SAMPLERATE: |
2c9c0df8 BV |
901 | g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}")); |
902 | gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"), samplerates, | |
903 | ARRAY_SIZE(samplerates), sizeof(uint64_t)); | |
904 | g_variant_builder_add(&gvb, "{sv}", "samplerates", gvar); | |
905 | *data = g_variant_builder_end(&gvb); | |
a1c743fc | 906 | break; |
39c64c6a | 907 | case SR_CONF_TRIGGER_MATCH: |
af945a66 | 908 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32, |
39c64c6a BV |
909 | trigger_matches, ARRAY_SIZE(trigger_matches), |
910 | sizeof(int32_t)); | |
c50277a6 | 911 | break; |
a1c743fc | 912 | default: |
bd6fbf62 | 913 | return SR_ERR_NA; |
a1c743fc BV |
914 | } |
915 | ||
916 | return SR_OK; | |
917 | } | |
918 | ||
36b1c8e6 | 919 | /* Software trigger to determine exact trigger position. */ |
5fc01191 | 920 | static int get_trigger_offset(uint8_t *samples, uint16_t last_sample, |
36b1c8e6 HE |
921 | struct sigma_trigger *t) |
922 | { | |
923 | int i; | |
5fc01191 | 924 | uint16_t sample = 0; |
36b1c8e6 HE |
925 | |
926 | for (i = 0; i < 8; ++i) { | |
927 | if (i > 0) | |
5fc01191 MV |
928 | last_sample = sample; |
929 | sample = samples[2 * i] | (samples[2 * i + 1] << 8); | |
36b1c8e6 HE |
930 | |
931 | /* Simple triggers. */ | |
5fc01191 | 932 | if ((sample & t->simplemask) != t->simplevalue) |
36b1c8e6 HE |
933 | continue; |
934 | ||
935 | /* Rising edge. */ | |
5fc01191 MV |
936 | if (((last_sample & t->risingmask) != 0) || |
937 | ((sample & t->risingmask) != t->risingmask)) | |
36b1c8e6 HE |
938 | continue; |
939 | ||
940 | /* Falling edge. */ | |
bdfc7a89 | 941 | if ((last_sample & t->fallingmask) != t->fallingmask || |
5fc01191 | 942 | (sample & t->fallingmask) != 0) |
36b1c8e6 HE |
943 | continue; |
944 | ||
945 | break; | |
946 | } | |
947 | ||
948 | /* If we did not match, return original trigger pos. */ | |
949 | return i & 0x7; | |
950 | } | |
951 | ||
3513d965 MV |
952 | /* |
953 | * Return the timestamp of "DRAM cluster". | |
954 | */ | |
955 | static uint16_t sigma_dram_cluster_ts(struct sigma_dram_cluster *cluster) | |
956 | { | |
957 | return (cluster->timestamp_hi << 8) | cluster->timestamp_lo; | |
958 | } | |
959 | ||
23239b5c MV |
960 | static void sigma_decode_dram_cluster(struct sigma_dram_cluster *dram_cluster, |
961 | unsigned int events_in_cluster, | |
1e23158b | 962 | unsigned int triggered, |
23239b5c MV |
963 | struct sr_dev_inst *sdi) |
964 | { | |
965 | struct dev_context *devc = sdi->priv; | |
966 | struct sigma_state *ss = &devc->state; | |
967 | struct sr_datafeed_packet packet; | |
968 | struct sr_datafeed_logic logic; | |
969 | uint16_t tsdiff, ts; | |
970 | uint8_t samples[2048]; | |
971 | unsigned int i; | |
972 | ||
23239b5c MV |
973 | ts = sigma_dram_cluster_ts(dram_cluster); |
974 | tsdiff = ts - ss->lastts; | |
975 | ss->lastts = ts; | |
976 | ||
977 | packet.type = SR_DF_LOGIC; | |
978 | packet.payload = &logic; | |
979 | logic.unitsize = 2; | |
980 | logic.data = samples; | |
981 | ||
982 | /* | |
983 | * First of all, send Sigrok a copy of the last sample from | |
984 | * previous cluster as many times as needed to make up for | |
985 | * the differential characteristics of data we get from the | |
986 | * Sigma. Sigrok needs one sample of data per period. | |
987 | * | |
988 | * One DRAM cluster contains a timestamp and seven samples, | |
989 | * the units of timestamp are "devc->period_ps" , the first | |
990 | * sample in the cluster happens at the time of the timestamp | |
991 | * and the remaining samples happen at timestamp +1...+6 . | |
992 | */ | |
993 | for (ts = 0; ts < tsdiff - (EVENTS_PER_CLUSTER - 1); ts++) { | |
994 | i = ts % 1024; | |
995 | samples[2 * i + 0] = ss->lastsample & 0xff; | |
996 | samples[2 * i + 1] = ss->lastsample >> 8; | |
997 | ||
998 | /* | |
999 | * If we have 1024 samples ready or we're at the | |
1000 | * end of submitting the padding samples, submit | |
1001 | * the packet to Sigrok. | |
1002 | */ | |
1003 | if ((i == 1023) || (ts == (tsdiff - EVENTS_PER_CLUSTER))) { | |
1004 | logic.length = (i + 1) * logic.unitsize; | |
102f1239 | 1005 | sr_session_send(sdi, &packet); |
23239b5c MV |
1006 | } |
1007 | } | |
1008 | ||
1009 | /* | |
1010 | * Parse the samples in current cluster and prepare them | |
1011 | * to be submitted to Sigrok. | |
1012 | */ | |
1013 | for (i = 0; i < events_in_cluster; i++) { | |
1014 | samples[2 * i + 1] = dram_cluster->samples[i].sample_lo; | |
1015 | samples[2 * i + 0] = dram_cluster->samples[i].sample_hi; | |
1016 | } | |
1017 | ||
1018 | /* Send data up to trigger point (if triggered). */ | |
1019 | int trigger_offset = 0; | |
1e23158b | 1020 | if (triggered) { |
23239b5c MV |
1021 | /* |
1022 | * Trigger is not always accurate to sample because of | |
1023 | * pipeline delay. However, it always triggers before | |
1024 | * the actual event. We therefore look at the next | |
1025 | * samples to pinpoint the exact position of the trigger. | |
1026 | */ | |
1027 | trigger_offset = get_trigger_offset(samples, | |
1028 | ss->lastsample, &devc->trigger); | |
1029 | ||
1030 | if (trigger_offset > 0) { | |
1031 | packet.type = SR_DF_LOGIC; | |
1032 | logic.length = trigger_offset * logic.unitsize; | |
102f1239 | 1033 | sr_session_send(sdi, &packet); |
23239b5c MV |
1034 | events_in_cluster -= trigger_offset; |
1035 | } | |
1036 | ||
1037 | /* Only send trigger if explicitly enabled. */ | |
1038 | if (devc->use_triggers) { | |
1039 | packet.type = SR_DF_TRIGGER; | |
102f1239 | 1040 | sr_session_send(sdi, &packet); |
23239b5c MV |
1041 | } |
1042 | } | |
1043 | ||
1044 | if (events_in_cluster > 0) { | |
1045 | packet.type = SR_DF_LOGIC; | |
1046 | logic.length = events_in_cluster * logic.unitsize; | |
1047 | logic.data = samples + (trigger_offset * logic.unitsize); | |
102f1239 | 1048 | sr_session_send(sdi, &packet); |
23239b5c MV |
1049 | } |
1050 | ||
1051 | ss->lastsample = | |
1052 | samples[2 * (events_in_cluster - 1) + 0] | | |
1053 | (samples[2 * (events_in_cluster - 1) + 1] << 8); | |
1054 | ||
1055 | } | |
1056 | ||
28a35d8a | 1057 | /* |
fefa1800 UH |
1058 | * Decode chunk of 1024 bytes, 64 clusters, 7 events per cluster. |
1059 | * Each event is 20ns apart, and can contain multiple samples. | |
f78898e9 HE |
1060 | * |
1061 | * For 200 MHz, events contain 4 samples for each channel, spread 5 ns apart. | |
1062 | * For 100 MHz, events contain 2 samples for each channel, spread 10 ns apart. | |
1063 | * For 50 MHz and below, events contain one sample for each channel, | |
1064 | * spread 20 ns apart. | |
28a35d8a | 1065 | */ |
1e23158b MV |
1066 | static int decode_chunk_ts(struct sigma_dram_line *dram_line, |
1067 | uint16_t events_in_line, | |
1068 | uint32_t trigger_event, | |
102f1239 | 1069 | struct sr_dev_inst *sdi) |
28a35d8a | 1070 | { |
3628074d | 1071 | struct sigma_dram_cluster *dram_cluster; |
0e1357e8 | 1072 | struct dev_context *devc = sdi->priv; |
5fc01191 MV |
1073 | unsigned int clusters_in_line = |
1074 | (events_in_line + (EVENTS_PER_CLUSTER - 1)) / EVENTS_PER_CLUSTER; | |
1075 | unsigned int events_in_cluster; | |
23239b5c | 1076 | unsigned int i; |
1e23158b | 1077 | uint32_t trigger_cluster = ~0, triggered = 0; |
ee492173 | 1078 | |
4ae1f451 | 1079 | /* Check if trigger is in this chunk. */ |
1e23158b MV |
1080 | if (trigger_event < (64 * 7)) { |
1081 | if (devc->cur_samplerate <= SR_MHZ(50)) { | |
1082 | trigger_event -= MIN(EVENTS_PER_CLUSTER - 1, | |
1083 | trigger_event); | |
1084 | } | |
57bbf56b | 1085 | |
f3f19d11 | 1086 | /* Find in which cluster the trigger occurred. */ |
1e23158b | 1087 | trigger_cluster = trigger_event / EVENTS_PER_CLUSTER; |
ee492173 | 1088 | } |
28a35d8a | 1089 | |
5fc01191 MV |
1090 | /* For each full DRAM cluster. */ |
1091 | for (i = 0; i < clusters_in_line; i++) { | |
3628074d | 1092 | dram_cluster = &dram_line->cluster[i]; |
5fc01191 | 1093 | |
5fc01191 | 1094 | /* The last cluster might not be full. */ |
23239b5c MV |
1095 | if ((i == clusters_in_line - 1) && |
1096 | (events_in_line % EVENTS_PER_CLUSTER)) { | |
5fc01191 | 1097 | events_in_cluster = events_in_line % EVENTS_PER_CLUSTER; |
23239b5c | 1098 | } else { |
5fc01191 | 1099 | events_in_cluster = EVENTS_PER_CLUSTER; |
abda62ce | 1100 | } |
ee492173 | 1101 | |
1e23158b MV |
1102 | triggered = (i == trigger_cluster); |
1103 | sigma_decode_dram_cluster(dram_cluster, events_in_cluster, | |
1104 | triggered, sdi); | |
28a35d8a HE |
1105 | } |
1106 | ||
e46b8fb1 | 1107 | return SR_OK; |
28a35d8a HE |
1108 | } |
1109 | ||
6057d9fa | 1110 | static int download_capture(struct sr_dev_inst *sdi) |
28a35d8a | 1111 | { |
6057d9fa | 1112 | struct dev_context *devc = sdi->priv; |
e15e5873 | 1113 | const uint32_t chunks_per_read = 32; |
fd830beb | 1114 | struct sigma_dram_line *dram_line; |
c6648b66 | 1115 | int bufsz; |
462fe786 | 1116 | uint32_t stoppos, triggerpos; |
6057d9fa MV |
1117 | struct sr_datafeed_packet packet; |
1118 | uint8_t modestatus; | |
1119 | ||
c6648b66 MV |
1120 | uint32_t i; |
1121 | uint32_t dl_lines_total, dl_lines_curr, dl_lines_done; | |
46641fac | 1122 | uint32_t dl_events_in_line = 64 * 7; |
1e23158b | 1123 | uint32_t trg_line = ~0, trg_event = ~0; |
c6648b66 | 1124 | |
fd830beb MV |
1125 | dram_line = g_try_malloc0(chunks_per_read * sizeof(*dram_line)); |
1126 | if (!dram_line) | |
1127 | return FALSE; | |
1128 | ||
6868626b BV |
1129 | sr_info("Downloading sample data."); |
1130 | ||
6057d9fa MV |
1131 | /* Stop acquisition. */ |
1132 | sigma_set_register(WRITE_MODE, 0x11, devc); | |
1133 | ||
1134 | /* Set SDRAM Read Enable. */ | |
1135 | sigma_set_register(WRITE_MODE, 0x02, devc); | |
1136 | ||
1137 | /* Get the current position. */ | |
462fe786 | 1138 | sigma_read_pos(&stoppos, &triggerpos, devc); |
6057d9fa MV |
1139 | |
1140 | /* Check if trigger has fired. */ | |
1141 | modestatus = sigma_get_register(READ_MODE, devc); | |
1e23158b | 1142 | if (modestatus & 0x20) { |
c6648b66 | 1143 | trg_line = triggerpos >> 9; |
1e23158b MV |
1144 | trg_event = triggerpos & 0x1ff; |
1145 | } | |
6057d9fa | 1146 | |
c6648b66 MV |
1147 | /* |
1148 | * Determine how many 1024b "DRAM lines" do we need to read from the | |
1149 | * Sigma so we have a complete set of samples. Note that the last | |
1150 | * line can be only partial, containing less than 64 clusters. | |
1151 | */ | |
1152 | dl_lines_total = (stoppos >> 9) + 1; | |
6868626b | 1153 | |
c6648b66 | 1154 | dl_lines_done = 0; |
6868626b | 1155 | |
c6648b66 MV |
1156 | while (dl_lines_total > dl_lines_done) { |
1157 | /* We can download only up-to 32 DRAM lines in one go! */ | |
1158 | dl_lines_curr = MIN(chunks_per_read, dl_lines_total); | |
6868626b | 1159 | |
f41a4cae MV |
1160 | bufsz = sigma_read_dram(dl_lines_done, dl_lines_curr, |
1161 | (uint8_t *)dram_line, devc); | |
c6648b66 MV |
1162 | /* TODO: Check bufsz. For now, just avoid compiler warnings. */ |
1163 | (void)bufsz; | |
6868626b | 1164 | |
c6648b66 MV |
1165 | /* This is the first DRAM line, so find the initial timestamp. */ |
1166 | if (dl_lines_done == 0) { | |
3513d965 MV |
1167 | devc->state.lastts = |
1168 | sigma_dram_cluster_ts(&dram_line[0].cluster[0]); | |
c6648b66 | 1169 | devc->state.lastsample = 0; |
6868626b BV |
1170 | } |
1171 | ||
c6648b66 | 1172 | for (i = 0; i < dl_lines_curr; i++) { |
1e23158b | 1173 | uint32_t trigger_event = ~0; |
c6648b66 MV |
1174 | /* The last "DRAM line" can be only partially full. */ |
1175 | if (dl_lines_done + i == dl_lines_total - 1) | |
46641fac | 1176 | dl_events_in_line = stoppos & 0x1ff; |
c6648b66 | 1177 | |
e69ad48e | 1178 | /* Test if the trigger happened on this line. */ |
c6648b66 | 1179 | if (dl_lines_done + i == trg_line) |
1e23158b | 1180 | trigger_event = trg_event; |
e69ad48e | 1181 | |
1e23158b MV |
1182 | decode_chunk_ts(dram_line + i, dl_events_in_line, |
1183 | trigger_event, sdi); | |
c6648b66 | 1184 | } |
6868626b | 1185 | |
c6648b66 | 1186 | dl_lines_done += dl_lines_curr; |
6868626b BV |
1187 | } |
1188 | ||
6057d9fa MV |
1189 | /* All done. */ |
1190 | packet.type = SR_DF_END; | |
1191 | sr_session_send(sdi, &packet); | |
1192 | ||
1193 | dev_acquisition_stop(sdi, sdi); | |
1194 | ||
fd830beb MV |
1195 | g_free(dram_line); |
1196 | ||
6057d9fa | 1197 | return TRUE; |
6868626b BV |
1198 | } |
1199 | ||
d4051930 MV |
1200 | /* |
1201 | * Handle the Sigma when in CAPTURE mode. This function checks: | |
1202 | * - Sampling time ended | |
1203 | * - DRAM capacity overflow | |
1204 | * This function triggers download of the samples from Sigma | |
1205 | * in case either of the above conditions is true. | |
1206 | */ | |
1207 | static int sigma_capture_mode(struct sr_dev_inst *sdi) | |
6868626b | 1208 | { |
d4051930 MV |
1209 | struct dev_context *devc = sdi->priv; |
1210 | ||
94ba4bd6 | 1211 | uint64_t running_msec; |
28a35d8a | 1212 | struct timeval tv; |
28a35d8a | 1213 | |
00c86508 | 1214 | uint32_t stoppos, triggerpos; |
28a35d8a | 1215 | |
00c86508 | 1216 | /* Check if the selected sampling duration passed. */ |
d4051930 MV |
1217 | gettimeofday(&tv, 0); |
1218 | running_msec = (tv.tv_sec - devc->start_tv.tv_sec) * 1000 + | |
00c86508 MV |
1219 | (tv.tv_usec - devc->start_tv.tv_usec) / 1000; |
1220 | if (running_msec >= devc->limit_msec) | |
6057d9fa | 1221 | return download_capture(sdi); |
00c86508 MV |
1222 | |
1223 | /* Get the position in DRAM to which the FPGA is writing now. */ | |
1224 | sigma_read_pos(&stoppos, &triggerpos, devc); | |
1225 | /* Test if DRAM is full and if so, download the data. */ | |
1226 | if ((stoppos >> 9) == 32767) | |
6057d9fa | 1227 | return download_capture(sdi); |
28a35d8a | 1228 | |
d4051930 MV |
1229 | return TRUE; |
1230 | } | |
28a35d8a | 1231 | |
d4051930 MV |
1232 | static int receive_data(int fd, int revents, void *cb_data) |
1233 | { | |
1234 | struct sr_dev_inst *sdi; | |
1235 | struct dev_context *devc; | |
88c51afe | 1236 | |
d4051930 MV |
1237 | (void)fd; |
1238 | (void)revents; | |
88c51afe | 1239 | |
d4051930 MV |
1240 | sdi = cb_data; |
1241 | devc = sdi->priv; | |
1242 | ||
1243 | if (devc->state.state == SIGMA_IDLE) | |
1244 | return TRUE; | |
1245 | ||
1246 | if (devc->state.state == SIGMA_CAPTURE) | |
1247 | return sigma_capture_mode(sdi); | |
28a35d8a | 1248 | |
28a35d8a HE |
1249 | return TRUE; |
1250 | } | |
1251 | ||
c53d793f HE |
1252 | /* Build a LUT entry used by the trigger functions. */ |
1253 | static void build_lut_entry(uint16_t value, uint16_t mask, uint16_t *entry) | |
ee492173 HE |
1254 | { |
1255 | int i, j, k, bit; | |
1256 | ||
ba7dd8bb | 1257 | /* For each quad channel. */ |
ee492173 | 1258 | for (i = 0; i < 4; ++i) { |
c53d793f | 1259 | entry[i] = 0xffff; |
ee492173 | 1260 | |
f758d074 | 1261 | /* For each bit in LUT. */ |
ee492173 HE |
1262 | for (j = 0; j < 16; ++j) |
1263 | ||
ba7dd8bb | 1264 | /* For each channel in quad. */ |
ee492173 HE |
1265 | for (k = 0; k < 4; ++k) { |
1266 | bit = 1 << (i * 4 + k); | |
1267 | ||
c53d793f HE |
1268 | /* Set bit in entry */ |
1269 | if ((mask & bit) && | |
1270 | ((!(value & bit)) != | |
4ae1f451 | 1271 | (!(j & (1 << k))))) |
c53d793f | 1272 | entry[i] &= ~(1 << j); |
ee492173 HE |
1273 | } |
1274 | } | |
c53d793f | 1275 | } |
ee492173 | 1276 | |
c53d793f HE |
1277 | /* Add a logical function to LUT mask. */ |
1278 | static void add_trigger_function(enum triggerop oper, enum triggerfunc func, | |
1279 | int index, int neg, uint16_t *mask) | |
1280 | { | |
1281 | int i, j; | |
1282 | int x[2][2], tmp, a, b, aset, bset, rset; | |
1283 | ||
1284 | memset(x, 0, 4 * sizeof(int)); | |
1285 | ||
1286 | /* Trigger detect condition. */ | |
1287 | switch (oper) { | |
1288 | case OP_LEVEL: | |
1289 | x[0][1] = 1; | |
1290 | x[1][1] = 1; | |
1291 | break; | |
1292 | case OP_NOT: | |
1293 | x[0][0] = 1; | |
1294 | x[1][0] = 1; | |
1295 | break; | |
1296 | case OP_RISE: | |
1297 | x[0][1] = 1; | |
1298 | break; | |
1299 | case OP_FALL: | |
1300 | x[1][0] = 1; | |
1301 | break; | |
1302 | case OP_RISEFALL: | |
1303 | x[0][1] = 1; | |
1304 | x[1][0] = 1; | |
1305 | break; | |
1306 | case OP_NOTRISE: | |
1307 | x[1][1] = 1; | |
1308 | x[0][0] = 1; | |
1309 | x[1][0] = 1; | |
1310 | break; | |
1311 | case OP_NOTFALL: | |
1312 | x[1][1] = 1; | |
1313 | x[0][0] = 1; | |
1314 | x[0][1] = 1; | |
1315 | break; | |
1316 | case OP_NOTRISEFALL: | |
1317 | x[1][1] = 1; | |
1318 | x[0][0] = 1; | |
1319 | break; | |
1320 | } | |
1321 | ||
1322 | /* Transpose if neg is set. */ | |
1323 | if (neg) { | |
ea9cfed7 | 1324 | for (i = 0; i < 2; ++i) { |
c53d793f HE |
1325 | for (j = 0; j < 2; ++j) { |
1326 | tmp = x[i][j]; | |
1327 | x[i][j] = x[1-i][1-j]; | |
1328 | x[1-i][1-j] = tmp; | |
1329 | } | |
ea9cfed7 | 1330 | } |
c53d793f HE |
1331 | } |
1332 | ||
1333 | /* Update mask with function. */ | |
1334 | for (i = 0; i < 16; ++i) { | |
1335 | a = (i >> (2 * index + 0)) & 1; | |
1336 | b = (i >> (2 * index + 1)) & 1; | |
1337 | ||
1338 | aset = (*mask >> i) & 1; | |
1339 | bset = x[b][a]; | |
1340 | ||
382cb19f | 1341 | rset = 0; |
c53d793f HE |
1342 | if (func == FUNC_AND || func == FUNC_NAND) |
1343 | rset = aset & bset; | |
1344 | else if (func == FUNC_OR || func == FUNC_NOR) | |
1345 | rset = aset | bset; | |
1346 | else if (func == FUNC_XOR || func == FUNC_NXOR) | |
1347 | rset = aset ^ bset; | |
1348 | ||
1349 | if (func == FUNC_NAND || func == FUNC_NOR || func == FUNC_NXOR) | |
1350 | rset = !rset; | |
1351 | ||
1352 | *mask &= ~(1 << i); | |
1353 | ||
1354 | if (rset) | |
1355 | *mask |= 1 << i; | |
1356 | } | |
1357 | } | |
1358 | ||
1359 | /* | |
1360 | * Build trigger LUTs used by 50 MHz and lower sample rates for supporting | |
1361 | * simple pin change and state triggers. Only two transitions (rise/fall) can be | |
1362 | * set at any time, but a full mask and value can be set (0/1). | |
1363 | */ | |
0e1357e8 | 1364 | static int build_basic_trigger(struct triggerlut *lut, struct dev_context *devc) |
c53d793f HE |
1365 | { |
1366 | int i,j; | |
4ae1f451 | 1367 | uint16_t masks[2] = { 0, 0 }; |
c53d793f HE |
1368 | |
1369 | memset(lut, 0, sizeof(struct triggerlut)); | |
1370 | ||
f3f19d11 | 1371 | /* Constant for simple triggers. */ |
c53d793f HE |
1372 | lut->m4 = 0xa000; |
1373 | ||
1374 | /* Value/mask trigger support. */ | |
0e1357e8 | 1375 | build_lut_entry(devc->trigger.simplevalue, devc->trigger.simplemask, |
99965709 | 1376 | lut->m2d); |
c53d793f HE |
1377 | |
1378 | /* Rise/fall trigger support. */ | |
1379 | for (i = 0, j = 0; i < 16; ++i) { | |
0e1357e8 BV |
1380 | if (devc->trigger.risingmask & (1 << i) || |
1381 | devc->trigger.fallingmask & (1 << i)) | |
c53d793f HE |
1382 | masks[j++] = 1 << i; |
1383 | } | |
1384 | ||
1385 | build_lut_entry(masks[0], masks[0], lut->m0d); | |
1386 | build_lut_entry(masks[1], masks[1], lut->m1d); | |
1387 | ||
1388 | /* Add glue logic */ | |
1389 | if (masks[0] || masks[1]) { | |
1390 | /* Transition trigger. */ | |
0e1357e8 | 1391 | if (masks[0] & devc->trigger.risingmask) |
c53d793f | 1392 | add_trigger_function(OP_RISE, FUNC_OR, 0, 0, &lut->m3); |
0e1357e8 | 1393 | if (masks[0] & devc->trigger.fallingmask) |
c53d793f | 1394 | add_trigger_function(OP_FALL, FUNC_OR, 0, 0, &lut->m3); |
0e1357e8 | 1395 | if (masks[1] & devc->trigger.risingmask) |
c53d793f | 1396 | add_trigger_function(OP_RISE, FUNC_OR, 1, 0, &lut->m3); |
0e1357e8 | 1397 | if (masks[1] & devc->trigger.fallingmask) |
c53d793f HE |
1398 | add_trigger_function(OP_FALL, FUNC_OR, 1, 0, &lut->m3); |
1399 | } else { | |
1400 | /* Only value/mask trigger. */ | |
1401 | lut->m3 = 0xffff; | |
1402 | } | |
ee492173 | 1403 | |
c53d793f | 1404 | /* Triggertype: event. */ |
ee492173 HE |
1405 | lut->params.selres = 3; |
1406 | ||
e46b8fb1 | 1407 | return SR_OK; |
ee492173 HE |
1408 | } |
1409 | ||
6078d2c9 | 1410 | static int dev_acquisition_start(const struct sr_dev_inst *sdi, void *cb_data) |
28a35d8a | 1411 | { |
0e1357e8 | 1412 | struct dev_context *devc; |
9ddb2a12 | 1413 | struct clockselect_50 clockselect; |
82957b65 | 1414 | int frac, triggerpin, ret; |
f4abaa9f | 1415 | uint8_t triggerselect = 0; |
57bbf56b | 1416 | struct triggerinout triggerinout_conf; |
ee492173 | 1417 | struct triggerlut lut; |
28a35d8a | 1418 | |
e73ffd42 BV |
1419 | if (sdi->status != SR_ST_ACTIVE) |
1420 | return SR_ERR_DEV_CLOSED; | |
1421 | ||
0e1357e8 | 1422 | devc = sdi->priv; |
28a35d8a | 1423 | |
39c64c6a BV |
1424 | if (convert_trigger(sdi) != SR_OK) { |
1425 | sr_err("Failed to configure triggers."); | |
014359e3 BV |
1426 | return SR_ERR; |
1427 | } | |
1428 | ||
ea9cfed7 | 1429 | /* If the samplerate has not been set, default to 200 kHz. */ |
0e1357e8 | 1430 | if (devc->cur_firmware == -1) { |
82957b65 UH |
1431 | if ((ret = set_samplerate(sdi, SR_KHZ(200))) != SR_OK) |
1432 | return ret; | |
1433 | } | |
e8397563 | 1434 | |
eec5275e | 1435 | /* Enter trigger programming mode. */ |
0e1357e8 | 1436 | sigma_set_register(WRITE_TRIGGER_SELECT1, 0x20, devc); |
28a35d8a | 1437 | |
eec5275e | 1438 | /* 100 and 200 MHz mode. */ |
0e1357e8 BV |
1439 | if (devc->cur_samplerate >= SR_MHZ(100)) { |
1440 | sigma_set_register(WRITE_TRIGGER_SELECT1, 0x81, devc); | |
57bbf56b | 1441 | |
a42aec7f HE |
1442 | /* Find which pin to trigger on from mask. */ |
1443 | for (triggerpin = 0; triggerpin < 8; ++triggerpin) | |
0e1357e8 | 1444 | if ((devc->trigger.risingmask | devc->trigger.fallingmask) & |
a42aec7f HE |
1445 | (1 << triggerpin)) |
1446 | break; | |
1447 | ||
1448 | /* Set trigger pin and light LED on trigger. */ | |
1449 | triggerselect = (1 << LEDSEL1) | (triggerpin & 0x7); | |
1450 | ||
1451 | /* Default rising edge. */ | |
0e1357e8 | 1452 | if (devc->trigger.fallingmask) |
a42aec7f | 1453 | triggerselect |= 1 << 3; |
57bbf56b | 1454 | |
eec5275e | 1455 | /* All other modes. */ |
0e1357e8 BV |
1456 | } else if (devc->cur_samplerate <= SR_MHZ(50)) { |
1457 | build_basic_trigger(&lut, devc); | |
ee492173 | 1458 | |
0e1357e8 | 1459 | sigma_write_trigger_lut(&lut, devc); |
57bbf56b HE |
1460 | |
1461 | triggerselect = (1 << LEDSEL1) | (1 << LEDSEL0); | |
1462 | } | |
1463 | ||
eec5275e | 1464 | /* Setup trigger in and out pins to default values. */ |
57bbf56b HE |
1465 | memset(&triggerinout_conf, 0, sizeof(struct triggerinout)); |
1466 | triggerinout_conf.trgout_bytrigger = 1; | |
1467 | triggerinout_conf.trgout_enable = 1; | |
1468 | ||
28a35d8a | 1469 | sigma_write_register(WRITE_TRIGGER_OPTION, |
57bbf56b | 1470 | (uint8_t *) &triggerinout_conf, |
0e1357e8 | 1471 | sizeof(struct triggerinout), devc); |
28a35d8a | 1472 | |
eec5275e | 1473 | /* Go back to normal mode. */ |
0e1357e8 | 1474 | sigma_set_register(WRITE_TRIGGER_SELECT1, triggerselect, devc); |
28a35d8a | 1475 | |
edca2c5c | 1476 | /* Set clock select register. */ |
0e1357e8 | 1477 | if (devc->cur_samplerate == SR_MHZ(200)) |
ba7dd8bb | 1478 | /* Enable 4 channels. */ |
0e1357e8 BV |
1479 | sigma_set_register(WRITE_CLOCK_SELECT, 0xf0, devc); |
1480 | else if (devc->cur_samplerate == SR_MHZ(100)) | |
ba7dd8bb | 1481 | /* Enable 8 channels. */ |
0e1357e8 | 1482 | sigma_set_register(WRITE_CLOCK_SELECT, 0x00, devc); |
edca2c5c HE |
1483 | else { |
1484 | /* | |
9ddb2a12 | 1485 | * 50 MHz mode (or fraction thereof). Any fraction down to |
eec5275e | 1486 | * 50 MHz / 256 can be used, but is not supported by sigrok API. |
edca2c5c | 1487 | */ |
0e1357e8 | 1488 | frac = SR_MHZ(50) / devc->cur_samplerate - 1; |
edca2c5c | 1489 | |
9ddb2a12 UH |
1490 | clockselect.async = 0; |
1491 | clockselect.fraction = frac; | |
ba7dd8bb | 1492 | clockselect.disabled_channels = 0; |
edca2c5c HE |
1493 | |
1494 | sigma_write_register(WRITE_CLOCK_SELECT, | |
9ddb2a12 | 1495 | (uint8_t *) &clockselect, |
0e1357e8 | 1496 | sizeof(clockselect), devc); |
edca2c5c HE |
1497 | } |
1498 | ||
fefa1800 | 1499 | /* Setup maximum post trigger time. */ |
99965709 | 1500 | sigma_set_register(WRITE_POST_TRIGGER, |
0e1357e8 | 1501 | (devc->capture_ratio * 255) / 100, devc); |
28a35d8a | 1502 | |
eec5275e | 1503 | /* Start acqusition. */ |
0e1357e8 BV |
1504 | gettimeofday(&devc->start_tv, 0); |
1505 | sigma_set_register(WRITE_MODE, 0x0d, devc); | |
99965709 | 1506 | |
3e9b7f9c | 1507 | devc->cb_data = cb_data; |
28a35d8a | 1508 | |
3c36c403 | 1509 | /* Send header packet to the session bus. */ |
102f1239 | 1510 | std_session_send_df_header(sdi, LOG_PREFIX); |
f366e86c | 1511 | |
f366e86c | 1512 | /* Add capture source. */ |
c650d3ec | 1513 | sr_session_source_add(sdi->session, -1, 0, 10, receive_data, (void *)sdi); |
f366e86c | 1514 | |
0e1357e8 | 1515 | devc->state.state = SIGMA_CAPTURE; |
6aac7737 | 1516 | |
e46b8fb1 | 1517 | return SR_OK; |
28a35d8a HE |
1518 | } |
1519 | ||
6078d2c9 | 1520 | static int dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data) |
28a35d8a | 1521 | { |
0e1357e8 | 1522 | struct dev_context *devc; |
6aac7737 | 1523 | |
3cd3a20b | 1524 | (void)cb_data; |
28a35d8a | 1525 | |
6868626b BV |
1526 | devc = sdi->priv; |
1527 | devc->state.state = SIGMA_IDLE; | |
6aac7737 | 1528 | |
dd7a4a71 | 1529 | sr_session_source_remove(sdi->session, -1); |
3010f21c UH |
1530 | |
1531 | return SR_OK; | |
28a35d8a HE |
1532 | } |
1533 | ||
c09f0b57 | 1534 | SR_PRIV struct sr_dev_driver asix_sigma_driver_info = { |
e519ba86 | 1535 | .name = "asix-sigma", |
6352d030 | 1536 | .longname = "ASIX SIGMA/SIGMA2", |
e519ba86 | 1537 | .api_version = 1, |
6078d2c9 UH |
1538 | .init = init, |
1539 | .cleanup = cleanup, | |
1540 | .scan = scan, | |
1541 | .dev_list = dev_list, | |
3b412e3a | 1542 | .dev_clear = dev_clear, |
035a1078 BV |
1543 | .config_get = config_get, |
1544 | .config_set = config_set, | |
a1c743fc | 1545 | .config_list = config_list, |
6078d2c9 UH |
1546 | .dev_open = dev_open, |
1547 | .dev_close = dev_close, | |
1548 | .dev_acquisition_start = dev_acquisition_start, | |
1549 | .dev_acquisition_stop = dev_acquisition_stop, | |
41812aca | 1550 | .context = NULL, |
28a35d8a | 1551 | }; |