Supported hardware

From sigrok
Jump to navigation Jump to search

sigrok is intended as a flexible, cross-platform, and hardware-independent software suite, i.e., it supports various devices from many different vendors.

Here is a list of currently supported devices (various stages of completeness) and devices we plan to support in the near future.

The lists are sorted by category (supported, in progress, planned), and alphabetically within those categories.

Logic analyzers

Mixed-signal devices

1 Only the logic analyzer functionality is supported so far, analog support is work in progress.

Oscilloscopes

Device Status Comments
Fluke Scopemeter 199B.png
Nuvola OK.png
supported
The Fluke ScopeMeter 199B is a handheld combined multimeter and oscilloscope. Only the multimeter functionality is supported; the device's slow communication speed does not allow for properly supporting it as an oscilloscope in sigrok.
Hameg hmo1524.png
Nuvola OK.png
supported
The Hameg HMO1524 is a USB-/RS232-based, 4-channel oscilloscope with an analog bandwidth of 150MHz and 2GS/s sampling rate.
Hameg HMO2024.png
Nuvola OK.png
supported
The Hameg HMO2024 is a USB-/RS232-based, 4-channel oscilloscope with an analog bandwidth of 200MHz and 2GS/s sampling rate.
Hantek DSO-2090.png
Nuvola OK.png
supported
The Hantek DSO-2090 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 40MHz and 100MS/s sampling rate.
Rigol DS1052E.png
Nuvola OK.png
supported
The Rigol DS1052E is a 50MHz, 1GSa/s, 2-channel digital storage oscilloscope. It can be upgraded to 100MHz analog bandwidth with a software modification.
Rigol ds1102e.png
Nuvola OK.png
supported
The Rigol DS1102E is a 100MHz, 1GSa/s, 2-channel digital storage oscilloscope.
Agilent DSO1014A.png
Nuvola Orange.png
in progress
The Agilent DSO1014A is a 100MHz, 2GSa/s, 4-channel digital storage oscilloscope.
Focussz fosc21 mugshot.png
Nuvola Orange.png
in progress
The Focussz Fosc21 is a USB-serial based, 2-channel oscilloscope with an analog bandwidth of 3kHz and a sampling rate of 8kHz (1 channel) / 4kHz (2 channels).
Hantek dso-5200a device front.png
Nuvola Orange.png
in progress
The Hantek DSO-5200A is a USB-based, 2-channel oscilloscope with an analog bandwidth of 200MHz and 250MS/s sampling rate.
OsciPrime.png
Nuvola Orange.png
in progress
The Nexus-Computing OsciPrime is a USB-based, 2-channel oscilloscope with an analog bandwidth of 3.3MHz-8MHz. It is 100% open source hardware and software.
Velleman PCSU1000.png
Nuvola Orange.png
in progress
The Velleman PCSU1000 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 50MHz and 1GS/s sampling rate.
Dso2250-top.png
Nuvola Orange.png
in progress
The Hantek DSO-2250 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 100MHz and 250MS/s sampling rate.
Sigrok logo no text transparent 512.png
Nuvola Red.png
planned
The Hantek DSO-1200 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 200MHz and 500MS/s sampling rate (and a multimeter).
Fluke scopemeter123.png
Nuvola Red.png
planned
The Fluke ScopeMeter 123 is a handheld, 2-channel oscilloscope with an analog bandwidth of 20MHz and 25MS/s sampling rate.
Picoscope 2203.png
Nuvola Red.png
planned
The Pico Technology PicoScope 2203 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 5MHz and 40/20MS/s sampling rate (1-/2-channel one-shot mode).
PicoScope 2205.png
Nuvola Red.png
planned
The Pico Technology PicoScope 2205 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 25MHz and 200/100MS/s sampling rate (1-/2-channel one-shot mode).
Picoscope 3206.png
Nuvola Red.png
planned
The Pico Technology PicoScope 3206 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 200MHz and 200/100MS/s sampling rate (1-/2-channel one-shot mode).
Picoscope 5203.png
Nuvola Red.png
planned
The Pico Technology PicoScope 5203 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 250MHz and 1/0,5GS/s sampling rate (1-/2-channel one-shot mode).
Usbduxfast.png
Nuvola Red.png
planned
The Incite Technology USB-DUXfast is an USB-based analog data acquisition device. It supports up to 16 channels at 3MHz.
UNI-T UTD2042C.png
Nuvola Red.png
planned
The UNI-T UTD2042C is a USB-/RS232-based, 2-channel oscilloscope with an analog bandwidth of 40MHz and 500MS/s sampling rate.
Voltcraft dso-220 usb.png
Nuvola Red.png
planned
The Voltcraft DSO-220 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 20MHz and 60MS/s sampling rate.
Voltcraft DSO-3062C.png
Nuvola Red.png
planned
The Voltcraft DSO-3062C is a 60MHz, 1GSa/s, 2-channel digital storage oscilloscope. It can be upgraded to 200MHz analog bandwidth with a software modification.
Rigol DS2072.png
Nuvola Red.png
planned
The Rigol DS2072 is a 70MHz, 2GSa/s, 2-channel digital storage oscilloscope.

Multimeters

LCR meters

TODO.

Sound level meters

Thermometers

Hygrometers

Anemometers

Light meters

Energy meters

DAQs

Dataloggers

Function generators

RF receivers

Spectrum analyzers

TODO.

Power supplies

GPIB interfaces

Potential other candidates

If you own any other logic analyzers, oscilloscopes, multimeters, dataloggers, ... and want to add support for them in sigrok (or donate/lend devices to developers), please let us know. We're always happy to add more hardware support! Join the mailing list or ask on IRC #sigrok if you want to help out.