Pico Technology PicoScope 2203

PicoScope 2203.

The Pico Technology PicoScope 2203 is a 2-channel USB-based PC oscilloscope (and spectrum analyzer and data logger and logic analyzer). It supports a bandwidth of 5MHz. The max. sampling rate (one-shot) is 40 MS/s (one channel mode) or 20 MS/s (two channel mode). The max. sampling rate for repetitive signals is 1 GS/s, the max. sampling rate in continuous streaming mode is 1 MS/s.

See Pico Technology PicoScope 2203/Info for more details (such as lsusb -vvv output) about the device.

Hardware

• Xilinx Spartan XC3S250E
• Cypress CY7C68013A-56PVXC
• Analog Devices AD9288
• Analog Devices AD8132
• Meder Electronics SIL05-1A72-71D
• Maxim MAX889S
• HC4052

Photos

• 

  Front

• 

  Back

• 

  PCB front

• 

  PCB back

See also this flickr set for more PCB photos of the device.

Protocol

Firmware

The usual Cypress FX2 firmware upload mechanism is used to upload a special FX2 firmware.

Resources

• Datasheet
• Vendor software