Supported hardware
sigrok is intended as a flexible, cross-platform, and hardware-independent software suite, i.e., it supports various devices from many different vendors.
Here is a list of currently supported devices (various stages of completeness) and devices we plan to support in the near future.
The lists are sorted by category (supported, in progress, planned), and alphabetically within those categories.
Logic analyzers
Supported:
ARMFLY Mini-Logic (8ch, 24MHz)
- Sigma2 2.png
ASIX SIGMA (16ch, 200MHz)
Braintechnology USB Interface V2.x (8/16ch, 24/12MHz)
Braintechnology USB-LPS (8/16ch, 24/12MHz)
ChronoVu LA8 (8ch, 100MHz)
CWAV USBee SX (8ch, 100MHz)
Dangerous Prototypes Buspirate (5ch, 1MHz)
EE Electronics ESLA100 (8ch, 24MHz)
IKALOGIC Scanalogic-2 (4ch, 20MHz)
IKALOGIC ScanaPLUS (9ch, 100MHz)
KingST KQS3506-LA16100 (16ch, 100/50/32/16MHz @ 3/6/9/16ch)
Lcsoft Mini Board (8/16ch, 24/12MHz)
Logic Shrimp (4ch, 20MHz)
MCU123 Saleae Logic clone (8ch, 24MHz)
MCU123 USBee AX Pro clone (8ch, 24MHz)
Openbench Logic Sniffer (32ch, 100MHz)
Robomotic BugLogic 3 (8ch, 24MHz)
Robomotic MiniLogic (8ch, 24MHz)
Saleae Logic (8ch, 24MHz)
Saleae Logic16 (16ch, 100/50/32/16MHz @ 3/6/9/16ch)
WayEngineer Saleae16 (16ch, 100/50/32/16MHz @ 3/6/9/16ch)
ZEROPLUS Logic Cube LAP-C(16032) (16ch, 100MHz)
ZEROPLUS LAP-16128U (16ch, 200MHz)
Work in progress:
ChronoVu LA16 (16ch, 200MHz)
RockyLogic Ant8 (8ch, 500MHz)
RockyLogic Ant18e (8ch, 1GHz)
Planned:
Acute PKLA-1216 (16ch, 200MHz)
Hantek 4032L (32ch, 400MHz)
Ideofy LA-08 (8ch, 96/60/30MHz @ 2/4/8ch)
Intronix Logicport LA1034 (34ch, 500MHz)
Link Instruments LA-5580 (80ch, 500MHz)
Microchip PICkit2 (3ch, 1MHz)
MiniLA (32ch, 100MHz)
MiniLA Mockup (32ch, 100MHz)
Sysclk LWLA1016 (16ch, 100MHz)
Sysclk LWLA1034 (34ch, 125MHz)
TechTools DigiView DV1-100 (18ch, 100MHz)
XMOS XTAG-2 (?ch, 50MHz)
ZEROPLUS Logic Cube LAP-C(322000) (32ch, 200MHz)
ZLG LA1032 (32ch, 100MHz)
Mixed-signal devices
Supported:
ARMFLY AX-Pro1 (8ch, 24MHz; 2ch analog, 24MSa/s, 40MHz BW)
EE Electronics ESLA201A1 (8ch, 24MHz; 2ch analog, 24MSa/s, 40MHz BW)
XZL_Studio AX1 (8ch, 24MHz; 2ch analog, 24MSa/s, 40MHz BW)
1 Only the logic analyzer functionality is supported so far, analog support is work in progress.
Work in progress:
BitScope BS10 (8ch, 40MHz; 2ch analog, 20MSa/s, ? BW)
Link Instruments MSO-19 (8ch, 200MHz; 1ch analog, 200MSa/s, 60MHz BW)
Planned:
Agilent MSO7104A (16ch, ?; 4ch analog, 2GSa/s, 100MHz BW)
Digilent Analog Discovery (16ch, 100MHz; 2ch analog, 100MSa/s, 5MHz BW)
Hantek 1008C (8ch)
Meilhaus MEphisto Scope1 (16ch, 100kHz; 2ch analog, 1MSa/s, 500kHz BW)
PoLabs PoScope Basic2 (16ch, 8MHz; 2ch analog, 200kSa/s, ? BW)
- QA100.png
QuantAsylum QA100 (12ch; 2ch analog)
Rigol VS5202D (16ch, 200MHz; 2ch analog)
XZL_Studio DX (16ch, 24MHz; 2ch analog)
Oscilloscopes
| Device | Status | Comments |
|---|---|---|
 |
 supported |
The Fluke ScopeMeter 199B is a handheld combined multimeter and oscilloscope. Only the multimeter functionality is supported; the device's slow communication speed does not allow for properly supporting it as an oscilloscope in sigrok. |
 |
supported |
The Hameg HMO1524 is a USB-/RS232-based, 4-channel oscilloscope with an analog bandwidth of 150MHz and 2GS/s sampling rate. |
 |
supported |
The Hameg HMO2024 is a USB-/RS232-based, 4-channel oscilloscope with an analog bandwidth of 200MHz and 2GS/s sampling rate. |
 |
supported |
The Hantek DSO-2090 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 40MHz and 100MS/s sampling rate. |
 |
supported |
The Rigol DS1052E is a 50MHz, 1GSa/s, 2-channel digital storage oscilloscope. It can be upgraded to 100MHz analog bandwidth with a software modification. |
 |
supported |
The Rigol DS1102E is a 100MHz, 1GSa/s, 2-channel digital storage oscilloscope. |
 |
 in progress |
The Agilent DSO1014A is a 100MHz, 2GSa/s, 4-channel digital storage oscilloscope. |
 |
in progress |
The Focussz Fosc21 is a USB-serial based, 2-channel oscilloscope with an analog bandwidth of 3kHz and a sampling rate of 8kHz (1 channel) / 4kHz (2 channels). |
 |
in progress |
The Hantek DSO-5200A is a USB-based, 2-channel oscilloscope with an analog bandwidth of 200MHz and 250MS/s sampling rate. |
 |
in progress |
The Nexus-Computing OsciPrime is a USB-based, 2-channel oscilloscope with an analog bandwidth of 3.3MHz-8MHz. It is 100% open source hardware and software. |
 |
in progress |
The Velleman PCSU1000 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 50MHz and 1GS/s sampling rate. |
 |
in progress |
The Hantek DSO-2250 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 100MHz and 250MS/s sampling rate. |
 |
 planned |
The Hantek DSO-1200 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 200MHz and 500MS/s sampling rate (and a multimeter). |
 |
planned |
The Fluke ScopeMeter 123 is a handheld, 2-channel oscilloscope with an analog bandwidth of 20MHz and 25MS/s sampling rate. |
 |
planned |
The Pico Technology PicoScope 2203 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 5MHz and 40/20MS/s sampling rate (1-/2-channel one-shot mode). |
 |
planned |
The Pico Technology PicoScope 2205 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 25MHz and 200/100MS/s sampling rate (1-/2-channel one-shot mode). |
 |
planned |
The Pico Technology PicoScope 3206 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 200MHz and 200/100MS/s sampling rate (1-/2-channel one-shot mode). |
 |
planned |
The Pico Technology PicoScope 5203 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 250MHz and 1/0,5GS/s sampling rate (1-/2-channel one-shot mode). |
 |
planned |
The Incite Technology USB-DUXfast is an USB-based analog data acquisition device. It supports up to 16 channels at 3MHz. |
 |
planned |
The UNI-T UTD2042C is a USB-/RS232-based, 2-channel oscilloscope with an analog bandwidth of 40MHz and 500MS/s sampling rate. |
 |
planned |
The Voltcraft DSO-220 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 20MHz and 60MS/s sampling rate. |
 |
planned |
The Voltcraft DSO-3062C is a 60MHz, 1GSa/s, 2-channel digital storage oscilloscope. It can be upgraded to 200MHz analog bandwidth with a software modification. |
 |
planned |
The Rigol DS2072 is a 70MHz, 2GSa/s, 2-channel digital storage oscilloscope. |
Multimeters
Supported:
Agilent U1231A (6000 counts, USB/Bluetooth)
Agilent U1232A (6000 counts, USB/Bluetooth)
- Agilent U1233A (6000 counts, USB/Bluetooth)
- BBC Goertz Metrawatt M2110 (30000 counts, RS232)
Brymen BM857 (50000 counts, RS232)
Digitek DT4000ZC (4000 counts, RS232)
Fluke 187/189 (50000 counts, RS232)
Fluke 287/289 (50000 counts, RS232)
Gossen Metrawatt Metrahit 16I (3100 counts, RS232)
Gossen Metrawatt Metrahit 18S (31000 counts, RS232)
ISO-TECH IDM103N (4000 counts, RS232)
MASTECH MAS345 (4000 counts, RS232)
Norma DM950 (21000 counts, RS232)
PCE PCE-DM32 (4000 counts, RS232)
PeakTech 3410 (4000 counts, RS232)
PeakTech 4370 (2000 counts, RS232)
RadioShack 22-168 (2000 counts, RS232)
RadioShack 22-805 (4000 counts, RS232)
RadioShack 22-812 (4000 counts, RS232)
Siemens B1105 (310000 counts, RS232)
Tecpel DMM-8061 (4000 counts, RS232/USB)
TekPower TP4000ZC (4000 counts, RS232)
Tenma 72-7745 (4000 counts, RS232/USB)
UNI-T UT60E (4000 counts, RS232/USB)
UNI-T UT61C (6000 counts, RS232/USB)
UNI-T UT61D (6000 counts, RS232/USB)
UNI-T UT61E (22000 counts, RS232/USB)
V&A VA18B (6000 counts, USB)
Victor 86C (4000 counts, USB)
Victor 70C (4000 counts, USB)
Voltcraft M-3650D (2000 counts, RS232)
Voltcraft M-4650CR (20000 counts, RS232)
Voltcraft VC-820 (4000 counts, RS232/USB)
Voltcraft VC-830 (6000 counts, RS232/USB)
Voltcraft VC-840 (4000 counts, RS232/USB)
Work in progress:
Tenma 72-1016 (6000 counts, RS232/USB)
Tenma 72-7730 (20000 counts, RS232/USB)
Tenma 72-7732 (40000 counts, RS232/USB)
Tenma 72-7750 (6000 counts, RS232/USB)
Tenma 72-9380A (40000 counts, RS232/USB)
Voltcraft M-3650CR (2000 counts, RS232)
Planned:
APPA 107 (4000 / 20000 counts, RS232)
Digitek DT8000 (8000 counts, RS232)
Digitek DT80000 (80000 counts, RS232)
Escort 179 (10000 counts, RS232)
Gossen-Metrawatt METRAHIT 30M (1200000 counts, RS232/USB)
MASTECH M9803R (4000 counts, RS232)
Metrix MX53 (50000 counts, RS232)
Metrix MX56C (50000 counts, RS232)
- Protek 6500 (50000 counts, RS232)
Voltcraft M-3890DT (4000 counts, USB)
Voltcraft M-4660A (20000 counts, RS232)
Voltcraft VC-920 (40000/4000 counts, RS232/USB)
Voltcraft VC-940 (40000/4000 counts, RS232/USB)
LCR meters
TODO.
Sound level meters
CEM DT-8852 (USB)
Colead SL-5868P (RS232)
Kecheng KC-330B (RS232)
Tondaj SL-814 (USB)
Voltcraft DL-161S (USB)
PCE PCE-222 (also: light-/thermo-/hygrometer; RS232)
Voltcraft DL-160S (USB)
Thermometers
| Device | Status | Comments |
|---|---|---|
 |
supported |
The Lascar Electronics EL-USB-2 is a USB-based temperature and humidity logger. |
 |
supported |
The MIC 98581 is a USB-based temperature logger. |
 |
supported |
The MIC 98583 is a USB-based temperature and humidity logger. |
 |
supported |
The UNI-T UT325 is a dual thermocouple logging thermometer. |
 |
supported |
The Voltcraft K204 is a 4-channel temperature logger with RS232 connectivity. |
 |
planned |
The APPA 55II is a 2-channel temperature logger with optical RS-232. |
 |
planned |
The Elitech RC-3 is a USB-based temperature logger. |
|
planned |
The PCE PCE-222 is a multi-function measurement device (light meter, thermometer, hygrometer, and sound level meter) with RS232 connectivity. |
 |
planned |
The RDing TEMPer is a USB-based temperature logger. |
 |
planned |
The RDing TEMPer Gold is a USB-based temperature logger. |
 |
planned |
The RDing TEMPer1 is a USB-based temperature logger. |
 |
planned |
The RDing TEMPer1K2 is a USB-based temperature logger. |
 |
planned |
The Voltcraft DL-120TH is a USB-based temperature logger. |
 |
planned |
The Voltcraft DL-140TH is a USB-based temperature logger. |
Hygrometers
- Lascar Electronics EL-USB-2 (temp/humidity, USB)
- MIC 98583 (temp/humidity, USB)
- PCE PCE-222 (also: light-/soundlevelmeter; RS232)
SiLabs Si7005USB-Dongle (USB)
Anemometers
MASTECH MS6252B (USB)
Light meters
Lutron YK-2005LX (RS232)
- PCE PCE-222 (RS232)
Energy meters
EDF Teleinfo (USB)
DAQs
NI USB-6008 (8/2 analog inputs/outputs, 12 digital I/Os)
Dataloggers
Lascar Electronics EL-USB-CO (carbon monoxide (CO) logger, USB)
GSG Indoor Air Monitor (air quality monitor, USB)
MAUL studio i (weighing scale, RS232)
Voltcraft CO-20 (air quality monitor, USB)
Function generators
Hantek DDS-3X25 (25MHz, PC-based, USB)
Siglent SDG1010 (10MHz, USB)
RF receivers
- Per Vices Noctar (100kHz-4GHz, IQ modulator/demodulator, PCIe)
Spectrum analyzers
TODO.
Power supplies
| Device | Status | Comments |
|---|---|---|
 |
planned |
The Manson HCS-3202 is a 1-channel programmable power supply (1-36V/0-10A) with USB connectivity. |
GPIB interfaces
| Device | Status | Comments |
|---|---|---|
 |
planned |
The Beiming S82357 is a USB-based, hardware-implemented GPIB interface (a clone of the Agilent 82357B USB/GPIB interface). |
 |
planned |
The ICS 488-USB is a USB-based, hardware-implemented GPIB interface. |
 |
planned |
The GPIB-USB 82357B clone is a USB-based, hardware-implemented GPIB interface (a clone of the Agilent 82357B USB/GPIB interface). |
 |
planned |
The National Instruments GPIB-ENET is an Ethernet-based, hardware-implemented GPIB interface. |
 |
planned |
The National Instruments GPIB-USB-HS is a USB-based, hardware-implemented GPIB interface. |
 |
planned |
The Prologix GPIB-USB is a USB-based, firmware-implemented GPIB interface. |
Potential other candidates
If you own any other logic analyzers, oscilloscopes, multimeters, dataloggers, ... and want to add support for them in sigrok (or donate/lend devices to developers), please let us know. We're always happy to add more hardware support! Join the mailing list or ask on IRC #sigrok if you want to help out.