Supported hardware
Revision as of 00:16, 1 January 2014 by Uwe Hermann (talk | contribs) (→Mixed-signal devices: MSO: More compact layout.)
sigrok is intended as a flexible, cross-platform, and hardware-independent software suite, i.e., it supports various devices from many different vendors.
Here is a list of currently supported devices (various stages of completeness) and devices we plan to support in the near future.
The lists are sorted by category (supported, in progress, planned), and alphabetically within those categories.
Logic analyzers
Supported:
ARMFLY Mini-Logic (8ch, 24MHz)
- Sigma2 2.png
ASIX SIGMA (16ch, 200MHz)
Braintechnology USB Interface V2.x (8/16ch, 24/12MHz)
Braintechnology USB-LPS (8/16ch, 24/12MHz)
ChronoVu LA8 (8ch, 100MHz)
CWAV USBee SX (8ch, 100MHz)
Dangerous Prototypes Buspirate (5ch, 1MHz)
EE Electronics ESLA100 (8ch, 24MHz)
IKALOGIC Scanalogic-2 (4ch, 20MHz)
IKALOGIC ScanaPLUS (9ch, 100MHz)
KingST KQS3506-LA16100 (16ch, 100/50/32/16MHz @ 3/6/9/16ch)
Lcsoft Mini Board (8/16ch, 24/12MHz)
Logic Shrimp (4ch, 20MHz)
MCU123 Saleae Logic clone (8ch, 24MHz)
MCU123 USBee AX Pro clone (8ch, 24MHz)
Openbench Logic Sniffer (32ch, 100MHz)
Robomotic BugLogic 3 (8ch, 24MHz)
Robomotic MiniLogic (8ch, 24MHz)
Saleae Logic (8ch, 24MHz)
Saleae Logic16 (16ch, 100/50/32/16MHz @ 3/6/9/16ch)
WayEngineer Saleae16 (16ch, 100/50/32/16MHz @ 3/6/9/16ch)
ZEROPLUS Logic Cube LAP-C(16032) (16ch, 100MHz)
ZEROPLUS LAP-16128U (16ch, 200MHz)
Work in progress:
ChronoVu LA16 (16ch, 200MHz)
RockyLogic Ant8 (8ch, 500MHz)
RockyLogic Ant18e (8ch, 1GHz)
Planned:
Acute PKLA-1216 (16ch, 200MHz)
Hantek 4032L (32ch, 400MHz)
Ideofy LA-08 (8ch, 96/60/30MHz @ 2/4/8ch)
Intronix Logicport LA1034 (34ch, 500MHz)
Link Instruments LA-5580 (80ch, 500MHz)
Microchip PICkit2 (3ch, 1MHz)
MiniLA (32ch, 100MHz)
MiniLA Mockup (32ch, 100MHz)
Sysclk LWLA1016 (16ch, 100MHz)
Sysclk LWLA1034 (34ch, 125MHz)
TechTools DigiView DV1-100 (18ch, 100MHz)
XMOS XTAG-2 (?ch, 50MHz)
ZEROPLUS Logic Cube LAP-C(322000) (32ch, 200MHz)
ZLG LA1032 (32ch, 100MHz)
Mixed-signal devices
Supported:
ARMFLY AX-Pro1 (8ch, 24MHz; 2ch analog, 24MSa/s, 40MHz BW)
EE Electronics ESLA201A1 (8ch, 24MHz; 2ch analog, 24MSa/s, 40MHz BW)
XZL_Studio AX1 (8ch, 24MHz; 2ch analog, 24MSa/s, 40MHz BW)
1 Only the logic analyzer functionality is supported so far, analog support is work in progress.
Work in progress:
BitScope BS10 (8ch, 40MHz; 2ch analog, 20MSa/s, ? BW)
Link Instruments MSO-19 (8ch, 200MHz; 1ch analog, 200MSa/s, 60MHz BW)
Planned:
Agilent MSO7104A (16ch, ?; 4ch analog, 2GSa/s, 100MHz BW)
Digilent Analog Discovery (16ch, 100MHz; 2ch analog, 100MSa/s, 5MHz BW)
Hantek 1008C (8ch)
Meilhaus MEphisto Scope1 (16ch, 100kHz; 2ch analog, 1MSa/s, 500kHz BW)
PoLabs PoScope Basic2 (16ch, 8MHz; 2ch analog, 200kSa/s, ? BW)
- QA100.png
QuantAsylum QA100 (12ch; 2ch analog)
Rigol VS5202D (16ch, 200MHz; 2ch analog)
XZL_Studio DX (16ch, 24MHz; 2ch analog)
Oscilloscopes
| Device | Status | Comments |
|---|---|---|
 |
 supported |
The Fluke ScopeMeter 199B is a handheld combined multimeter and oscilloscope. Only the multimeter functionality is supported; the device's slow communication speed does not allow for properly supporting it as an oscilloscope in sigrok. |
 |
supported |
The Hameg HMO1524 is a USB-/RS232-based, 4-channel oscilloscope with an analog bandwidth of 150MHz and 2GS/s sampling rate. |
 |
supported |
The Hameg HMO2024 is a USB-/RS232-based, 4-channel oscilloscope with an analog bandwidth of 200MHz and 2GS/s sampling rate. |
 |
supported |
The Hantek DSO-2090 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 40MHz and 100MS/s sampling rate. |
 |
supported |
The Rigol DS1052E is a 50MHz, 1GSa/s, 2-channel digital storage oscilloscope. It can be upgraded to 100MHz analog bandwidth with a software modification. |
 |
supported |
The Rigol DS1102E is a 100MHz, 1GSa/s, 2-channel digital storage oscilloscope. |
 |
 in progress |
The Agilent DSO1014A is a 100MHz, 2GSa/s, 4-channel digital storage oscilloscope. |
 |
in progress |
The Focussz Fosc21 is a USB-serial based, 2-channel oscilloscope with an analog bandwidth of 3kHz and a sampling rate of 8kHz (1 channel) / 4kHz (2 channels). |
 |
in progress |
The Hantek DSO-5200A is a USB-based, 2-channel oscilloscope with an analog bandwidth of 200MHz and 250MS/s sampling rate. |
 |
in progress |
The Nexus-Computing OsciPrime is a USB-based, 2-channel oscilloscope with an analog bandwidth of 3.3MHz-8MHz. It is 100% open source hardware and software. |
 |
in progress |
The Velleman PCSU1000 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 50MHz and 1GS/s sampling rate. |
 |
in progress |
The Hantek DSO-2250 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 100MHz and 250MS/s sampling rate. |
 |
 planned |
The Hantek DSO-1200 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 200MHz and 500MS/s sampling rate (and a multimeter). |
 |
planned |
The Fluke ScopeMeter 123 is a handheld, 2-channel oscilloscope with an analog bandwidth of 20MHz and 25MS/s sampling rate. |
 |
planned |
The Pico Technology PicoScope 2203 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 5MHz and 40/20MS/s sampling rate (1-/2-channel one-shot mode). |
 |
planned |
The Pico Technology PicoScope 2205 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 25MHz and 200/100MS/s sampling rate (1-/2-channel one-shot mode). |
 |
planned |
The Pico Technology PicoScope 3206 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 200MHz and 200/100MS/s sampling rate (1-/2-channel one-shot mode). |
 |
planned |
The Pico Technology PicoScope 5203 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 250MHz and 1/0,5GS/s sampling rate (1-/2-channel one-shot mode). |
 |
planned |
The Incite Technology USB-DUXfast is an USB-based analog data acquisition device. It supports up to 16 channels at 3MHz. |
 |
planned |
The UNI-T UTD2042C is a USB-/RS232-based, 2-channel oscilloscope with an analog bandwidth of 40MHz and 500MS/s sampling rate. |
 |
planned |
The Voltcraft DSO-220 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 20MHz and 60MS/s sampling rate. |
 |
planned |
The Voltcraft DSO-3062C is a 60MHz, 1GSa/s, 2-channel digital storage oscilloscope. It can be upgraded to 200MHz analog bandwidth with a software modification. |
 |
planned |
The Rigol DS2072 is a 70MHz, 2GSa/s, 2-channel digital storage oscilloscope. |
Multimeters
| Device | Status | Comments |
|---|---|---|
|
supported |
The Agilent U1231A is a 6000 counts, CAT III (600V) handheld digital multimeter with USB or Bluetooth connectivity. |
 |
supported |
The Agilent U1232A is a 6000 counts, CAT III (600V) handheld digital multimeter with USB or Bluetooth connectivity. |
|
supported |
The Agilent U1233A is a 6000 counts, CAT III (600V) handheld digital multimeter with USB or Bluetooth connectivity. |
|
supported |
The BBC Goertz Metrawatt M2110 is a historic 30000 counts, 1000V bench digital multimeter with RS232 connectivity. It is probably the oldest supported multimeter. |
 |
supported |
The Brymen BM857 is a 50000 counts (500000 DC), CAT III (1000V) / CAT IV (600V) handheld digital multimeter with RS232 connectivity. |
 |
supported |
The Digitek DT4000ZC is a 4000 counts, CAT II (600V) handheld digital multimeter with RS232 connectivity. |
 |
supported |
The Fluke 187/189 are 50000 counts, handheld digital multimeters with RS232 connectivity. |
 |
supported |
The Fluke 287/289 are 50000 counts handheld digital multimeters with RS232 connectivity. |
 |
supported |
The Gossen Metrawatt Metrahit 16I is a 3100 counts, handheld digital multimeter with insulation measurement and IR/RS232 connectivity. |
 |
supported |
The Gossen Metrawatt Metrahit 18S is a 31000 counts, handheld digital multimeter with IR/RS232 connectivity. |
 |
supported |
The ISO-TECH IDM103N is a 4000 counts, handheld digital multimeter with RS232 connectivity. |
 |
supported |
The MASTECH MAS345 is a 4000 counts, CAT II handheld digital multimeter with RS232 connectivity. |
 |
supported |
The Norma DM950 is a 21000 counts, handheld digital multimeter with RS232 connectivity. |
 |
supported |
The PCE PCE-DM32 is a 4000 counts, CAT III (1000V) / CAT IV (600V) handheld digital multimeter with RS232 connectivity. |
 |
supported |
The PeakTech 3410 is a 4000 counts, CAT II (1000V) handheld digital multimeter with RS232 connectivity. |
 |
supported |
The PeakTech 4370 is a 2000 counts, CAT II (1000V) handheld digital multimeter with RS232 connectivity. |
 |
supported |
The RadioShack 22-168 is a 2000 counts, handheld digital multimeter with RS232 connectivity. |
 |
supported |
The RadioShack 22-805 is a 4000 counts, CAT II (600V) handheld digital multimeter with RS232 connectivity. |
 |
supported |
The RadioShack 22-812 is a 4000 counts, CAT II (600V) handheld digital multimeter with RS232 connectivity. |
 |
supported |
The Siemens B1105 is a 310000 counts, handheld digital multimeter with IR/RS232 connectivity. |
 |
supported |
The Tecpel DMM-8061 is a 4000 counts, CAT IV (600V) handheld digital multimeter with RS232 or USB connectivity. |
 |
supported |
The TekPower TP4000ZC is a 4000 counts, CAT II (600V) handheld digital multimeter with RS232 connectivity. |
 |
supported |
The UNI-T UT60E is a 4000 counts, CAT III (1000V) / CAT IV (600V) handheld digital multimeter with RS232 or USB connectivity. |
 |
supported |
The UNI-T UT61C is a 6000 counts, CAT II (600V) / CAT III (300V) handheld digital multimeter with RS232 or USB connectivity. |
 |
supported |
The UNI-T UT61D is a 6000 counts, CAT II (600V) / CAT III (300V) handheld digital multimeter with RS232 or USB connectivity. |
 |
supported |
The UNI-T UT61E is a 22000 counts, CAT II (600V) / CAT III (300V) handheld digital multimeter with RS232 or USB connectivity. |
 |
supported |
The V&A VA18B is a 6000 counts, CAT II (1000V) handheld digital multimeter with USB connectivity. |
 |
supported |
The Victor 86C is a 4000 counts, CAT III (1000V) handheld digital multimeter with USB connectivity. |
 |
supported |
The Victor 70C is a 4000 counts, CAT II handheld digital multimeter with USB connectivity. |
 |
supported |
The Voltcraft M-3650D is a 2000 counts, handheld digital multimeter with RS232 connectivity. |
 |
supported |
The Voltcraft M-4650CR is a 20000 counts, handheld digital multimeter with RS232 connectivity. |
 |
supported |
The Voltcraft VC-820 is a 4000 counts, CAT III (1000V) / CAT IV (600V) handheld digital multimeter with RS232 or USB connectivity. |
 |
supported |
The Voltcraft VC-830 is a 6000 counts, CAT III (1000V) / CAT IV (600V) handheld digital multimeter with RS232 or USB connectivity. |
 |
supported |
The Voltcraft VC-840 is a 4000 counts, CAT IV (600V) handheld digital multimeter with RS232 or USB connectivity. |
 |
in progress |
The Tenma 72-1016 is a 6000 count bench multimeter with RS232/USB connectivity. |
 |
in progress |
The Tenma 72-7730 is a 20000 count handheld digital multimeter with USB connectivity. |
 |
in progress |
The Tenma 72-7732 is a 40000 count handheld digital multimeter with USB connectivity. |
 |
supported |
The Tenma 72-7745 is a 4000 count handheld digital multimeter with RS232/USB connectivity. |
 |
in progress |
The Tenma 72-7750 is a 6000 count handheld digital multimeter with RS232/USB connectivity. |
 |
in progress |
The Tenma 72-9380A is a 40000 count handheld digital multimeter with USB connectivity. |
 |
in progress |
The Voltcraft M-3650CR is a 2000 counts, handheld digital multimeter with RS232 connectivity. |
 |
planned |
The APPA 107 is a 4000 / 20000 counts, handheld digital multimeter with RS232 connectivity. |
 |
planned |
The Digitek DT8000 is a 8000 counts, handheld digital multimeter with RS232 connectivity. |
 |
planned |
The Digitek DT80000 is a 80000 counts, handheld digital multimeter with RS232 connectivity. |
 |
planned |
The Escort 179 is a 10000 counts, handheld digital multimeter with RS232 connectivity. |
 |
planned |
The Gossen-Metrawatt METRAHIT 30M is a 1200000 counts, CAT II (600V) / CAT III (300V) handheld digital multimeter with RS232 or USB connectivity. |
 |
planned |
The MASTECH M9803R is a 4000 counts, CAT II (1000V) digital bench multimeter with RS232 connectivity. |
 |
planned |
The Metrix MX53 is a 50000 counts, handheld digital multimeter with RS232 connectivity. |
 |
planned |
The Metrix MX56C is a 50000 counts, handheld digital multimeter with RS232 connectivity. |
|
planned |
The Protek 6500 is a 50000 counts handheld digital multimeter with RS232 connectivity. |
 |
planned |
The Voltcraft M-3890DT is a 4000 counts, CAT II handheld digital multimeter with USB connectivity. |
 |
planned |
The Voltcraft M-4660A is a 20000 counts, handheld digital multimeter with RS232 connectivity. |
 |
planned |
The Voltcraft VC-920 is a 40000/4000 counts, handheld digital multimeter with RS232 or USB connectivity. |
 |
planned |
The Voltcraft VC-940 is a 40000/4000 counts, handheld digital multimeter with RS232 or USB connectivity. |
LCR meters
TODO.
Sound level meters
| Device | Status | Comments |
|---|---|---|
 |
supported |
The CEM DT-8852 is an IEC 61672-1 class 2-compliant sound level meter with USB connectivity. |
 |
supported |
The Colead SL-5868P is a sound level meter with RS232 connectivity. |
 |
supported |
The Kecheng KC-330B is a cheap sound level data logger with USB interface. |
 |
supported |
The Tondaj SL-814 is a sound level meter with USB connectivity. |
 |
in progress |
The Voltcraft DL-161S is a sound level meter with USB connectivity. |
 |
planned |
The PCE PCE-222 is a multi-function measurement device (light meter, thermometer, hygrometer, and sound level meter) with RS232 connectivity. |
 |
planned |
The Voltcraft DL-160S is a sound level meter with USB connectivity. |
Thermometers
| Device | Status | Comments |
|---|---|---|
 |
supported |
The Lascar Electronics EL-USB-2 is a USB-based temperature and humidity logger. |
 |
supported |
The MIC 98581 is a USB-based temperature logger. |
 |
supported |
The MIC 98583 is a USB-based temperature and humidity logger. |
 |
supported |
The UNI-T UT325 is a dual thermocouple logging thermometer. |
 |
supported |
The Voltcraft K204 is a 4-channel temperature logger with RS232 connectivity. |
 |
planned |
The APPA 55II is a 2-channel temperature logger with optical RS-232. |
 |
planned |
The Elitech RC-3 is a USB-based temperature logger. |
|
planned |
The PCE PCE-222 is a multi-function measurement device (light meter, thermometer, hygrometer, and sound level meter) with RS232 connectivity. |
 |
planned |
The RDing TEMPer is a USB-based temperature logger. |
 |
planned |
The RDing TEMPer Gold is a USB-based temperature logger. |
 |
planned |
The RDing TEMPer1 is a USB-based temperature logger. |
 |
planned |
The RDing TEMPer1K2 is a USB-based temperature logger. |
 |
planned |
The Voltcraft DL-120TH is a USB-based temperature logger. |
 |
planned |
The Voltcraft DL-140TH is a USB-based temperature logger. |
Hygrometers
| Device | Status | Comments |
|---|---|---|
|
supported |
The Lascar Electronics EL-USB-2 is a USB-based temperature and humidity logger. |
|
supported |
The MIC 98583 is a USB-based temperature and humidity logger. |
|
planned |
The PCE PCE-222 is a multi-function measurement device (light meter, thermometer, hygrometer, and sound level meter) with RS232 connectivity. |
 |
planned |
The SiLabs Si7005USB-Dongle is a USB-based temperature and humidity logger. |
Anemometers
| Device | Status | Comments |
|---|---|---|
 |
planned |
The MASTECH MS6252B an anemometer with USB connectivity. |
Light meters
| Device | Status | Comments |
|---|---|---|
 |
planned |
The Lutron YK-2005LX is a light meter with RS232 connectivity. |
|
planned |
The PCE PCE-222 is a multi-function measurement device (light meter, thermometer, hygrometer, and sound level meter) with RS232 connectivity. |
Energy meters
| Device | Status | Comments |
|---|---|---|
 |
supported |
The EDF Teleinfo is a French standard energy meter protocol. |
DAQs
| Device | Status | Comments |
|---|---|---|
 |
planned |
The NI USB-6008 is a USB-based DAQ with 8 analog inputs (12 bits, max. 10kS/s), 2 analog outputs (12 bits, 150Hz update rate), and 12 digital I/Os. |
Dataloggers
| Device | Status | Comments |
|---|---|---|
 |
supported |
The Lascar Electronics EL-USB-CO is a standalone carbon monoxide (CO) logger. |
 |
planned |
The GSG Indoor Air Monitor is a USB-based air quality monitor. |
 |
planned |
The MAUL studio i is an RS232-based weighing scale. |
 |
planned |
The Voltcraft CO-20 is a USB-based air quality monitor. |
Function generators
| Device | Status | Comments |
|---|---|---|
 |
planned |
The Hantek DDS-3X25 is a 25MHz PC-based function generator (requires a USB connection to work). |
 |
planned |
The Siglent SDG1010 is a 10MHz function generator with USB connectivity. |
RF receivers
| Device | Status | Comments |
|---|---|---|
|
in progress |
The Per Vices Noctar is a PCIe IQ modulator/demodulator board. |
Spectrum analyzers
TODO.
Power supplies
| Device | Status | Comments |
|---|---|---|
 |
planned |
The Manson HCS-3202 is a 1-channel programmable power supply (1-36V/0-10A) with USB connectivity. |
GPIB interfaces
| Device | Status | Comments |
|---|---|---|
 |
planned |
The Beiming S82357 is a USB-based, hardware-implemented GPIB interface (a clone of the Agilent 82357B USB/GPIB interface). |
 |
planned |
The ICS 488-USB is a USB-based, hardware-implemented GPIB interface. |
 |
planned |
The GPIB-USB 82357B clone is a USB-based, hardware-implemented GPIB interface (a clone of the Agilent 82357B USB/GPIB interface). |
 |
planned |
The National Instruments GPIB-ENET is an Ethernet-based, hardware-implemented GPIB interface. |
 |
planned |
The National Instruments GPIB-USB-HS is a USB-based, hardware-implemented GPIB interface. |
 |
planned |
The Prologix GPIB-USB is a USB-based, firmware-implemented GPIB interface. |
Potential other candidates
If you own any other logic analyzers, oscilloscopes, multimeters, dataloggers, ... and want to add support for them in sigrok (or donate/lend devices to developers), please let us know. We're always happy to add more hardware support! Join the mailing list or ask on IRC #sigrok if you want to help out.