Difference between revisions of "Supported hardware"

From sigrok
Jump to navigation Jump to search
(→‎Multimeters: UNI-T UT61C is now supported.)
(→‎Logic analyzers: Use a more compact device support listing for LAs.)
Line 7: Line 7:
== Logic analyzers ==
== Logic analyzers ==


{| border="0" class="alternategrey sigroktable"
'''Supported:'''
|-
!Device
!Status
!Comments


{{hwsup_supported|ARMFLY Mini-Logic|File:ARMFLY MINI LOGIC.png|is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.}}
<gallery widths="100px" heights="100px">
File:ARMFLY MINI LOGIC.png|<small>[[ARMFLY Mini-Logic]] (8ch, 24MHz)</small>
File:Sigma2_2.png|<small>[[ASIX SIGMA]] (16ch, 200MHz)</small>
File:Braintechnology_usb_interface_v26.png|<small>[[Braintechnology USB Interface V2.x]] (8/16ch, 24/12MHz)</small>
File:Braintechnology_usb_lps.png|<small>[[Braintechnology USB-LPS]] (8/16ch, 24/12MHz)</small>
File:Chronovu la8 front.png|link=ChronoVu LA8|<small>[[ChronoVu LA8]] (8ch, 100MHz)</small>
File:Cwav_usbee_sx.png|<small>[[CWAV USBee SX]] (8ch, 100MHz)</small>
File:Buspirate_v3.png|<small>[[Dangerous Prototypes Buspirate]] (5ch, 1MHz)</small>
File:Eeelec xla esla100.png|<small>[[EE Electronics ESLA100]] (8ch, 24MHz)</small>
File:Ikalogic_scanalogic2.png|<small>[[IKALOGIC Scanalogic-2]] (4ch, 20MHz)</small>
File:Ikalogic scanaplus mugshot.png|<small>[[IKALOGIC ScanaPLUS]] (9ch, 100MHz)</small>
File:Kingst kqs3506 la16100.png|<small>[[KingST KQS3506-LA16100]] (16ch, 100/50/32/16MHz @ 3/6/9/16ch)</small>
File:Lcsoft-miniboard-front.png|<small>[[Lcsoft Mini Board]] (8/16ch, 24/12MHz)</small>
File:logic-shrimp-front.png|<small>[[Logic Shrimp]] (4ch, 20MHz)</small>
File:Mcu123 saleae logic clone.png|<small>[[MCU123 Saleae Logic clone]] (8ch, 24MHz)</small>
File:Usbee_ax_clone_front.png|<small>[[MCU123 USBee AX Pro clone]] (8ch, 24MHz)</small>
File:Openbench logic sniffer front.png|<small>[[Openbench Logic Sniffer]] (32ch, 100MHz)</small>
File:Robomotic buglogic3.png|<small>[[Robomotic BugLogic 3]] (8ch, 24MHz)</small>
File:Robomotic_minilogic.png|<small>[[Robomotic MiniLogic]] (8ch, 24MHz)</small>
File:Saleae Logic.png|<small>[[Saleae Logic]] (8ch, 24MHz)</small>
File:Saleae_Logic16_bottom.png|<small>[[Saleae Logic16]] (16ch, 100/50/32/16MHz @ 3/6/9/16ch)</small>
File:Wayengineer saleae16.png|<small>[[WayEngineer Saleae16]] (16ch, 100/50/32/16MHz @ 3/6/9/16ch)</small>
File:Zeroplus Logic Cube.png|<small>[[ZEROPLUS Logic Cube LAP-C(16032)]] (16ch, 100MHz)</small>
File:Zeroplus_lap-16128u.png|<small>[[ZEROPLUS LAP-16128U]] (16ch, 200MHz)</small>
</gallery>


{{hwsup_supported|ASIX SIGMA|File:Sigma2_2.png|is a USB-based, 16-channel logic analyzer with up to 200MHz sampling rate, and with 256Mbit on-board memory.}}
'''Work in progress:'''


{{hwsup_supported|Braintechnology USB Interface V2.x|File:Braintechnology_usb_interface_v26.png|is a Cypress FX2 eval board, which can be used as USB-based, 16-channel logic analyzer with up to 24MHz sampling rate.}}
<gallery widths="100px" heights="100px">
File:Chronovu la16.png|<small>[[ChronoVu LA16]] (16ch, 200MHz)</small>
File:Rockylogic_ant8.png|<small>[[RockyLogic Ant8]] (8ch, 500MHz)</small>
File:RockyLogic Ant18e.png|<small>[[RockyLogic Ant18e]] (8ch, 1GHz)</small>
</gallery>


{{hwsup_supported|Braintechnology USB-LPS|File:Braintechnology_usb_lps.png|is a USB-based, 16-channel logic analyzer (and signal generator) with up to 24MHz sampling rate.}}
'''Planned:'''


{{hwsup_supported|ChronoVu LA8|File:Chronovu la8 front.png|is a USB-based, 8-channel logic analyzer with up to 100MHz sampling rate.}}
<gallery widths="100px" heights="100px">
 
File:Acute_pkla1216.png|<small>[[Acute PKLA-1216]] (16ch, 200MHz)</small>
{{hwsup_supported|CWAV USBee SX|File:Cwav_usbee_sx.png|is a USB-based, 8-channel logic analyzer (and signal generator) with up to 24MHz sampling rate.}}
File:Hantek4032L_BoxSideView.png|<small>[[Hantek 4032L]] (32ch, 400MHz)</small>
 
File:Ideofy_la_08.png|<small>[[Ideofy LA-08]] (8ch, 96/60/30MHz @ 2/4/8ch)</small>
{{hwsup_supported|Dangerous Prototypes Buspirate|File:Buspirate_v3.png|is a USB-based, 5-channel logic analyzer with up to 1MHz sampling rate. It uses the [http://dangerousprototypes.com/docs/The_Logic_Sniffer%27s_extended_SUMP_protocol extended SUMP protocol].<br /><br />The Buspirate supports a logic analyzer mode and can thus be used for sample captures, however only at low speeds.}}
File:Intronix Logicport.png|<small>[[Intronix Logicport LA1034]] (34ch, 500MHz)</small>
 
File:Sigrok_logo_no_text_transparent_512.png|<small>[[Link Instruments LA-5580]] (80ch, 500MHz)</small>
{{hwsup_supported|EE Electronics ESLA100|File:Eeelec xla esla100.png|is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.}}
File:Microchip_pickit2.png|<small>[[Microchip PICkit2]] (3ch, 1MHz)</small>
 
File:Minila parport.png|<small>[[MiniLA]] (32ch, 100MHz)</small>
{{hwsup_supported|IKALOGIC Scanalogic-2|File:Ikalogic_scanalogic2.png|is a USB-based, 4-channel logic analyzer with up to 20MHz sampling rate.}}
File:Minila_mockup.png|<small>[[MiniLA Mockup]] (32ch, 100MHz)</small>
 
File:Sysclk lwla1016.png|<small>[[Sysclk LWLA1016]] (16ch, 100MHz)</small>
{{hwsup_supported|IKALOGIC ScanaPLUS|File:Ikalogic scanaplus mugshot.png|is a USB-based, 9-channel logic analyzer with up to 100MHz sampling rate.}}
File:Sysclk lwla1034.jpg|<small>[[Sysclk LWLA1034]] (34ch, 125MHz)</small>
 
File:Techtools_digiview_dv1-100.png|<small>[[TechTools DigiView DV1-100]] (18ch, 100MHz)</small>
{{hwsup_supported|KingST KQS3506-LA16100|File:Kingst kqs3506 la16100.png|is a USB-based, 16-channel logic analyzer with 100/50/32/16MHz sampling rate (at 3/6/9/16 enabled channels).}}
File:Xmos xtag2.png|<small>[[XMOS XTAG-2]] (?ch, 50MHz)</small>
 
File:Sigrok_logo_no_text_transparent_512.png|<small>[[ZEROPLUS Logic Cube LAP-C(322000)]] (32ch, 200MHz)</small>
{{hwsup_supported|Lcsoft Mini Board|File:Lcsoft-miniboard-front.png|is a Cypress FX2 eval board, which can be used as USB-based, 16-channel logic analyzer with up to 24MHz sampling rate.}}
File:Zlg_la1032.png|<small>[[ZLG LA1032]] (32ch, 100MHz)</small>
 
</gallery>
{{hwsup_supported|Logic Shrimp|File:logic-shrimp-front.png|is a USB-based, 4-channel logic analyzer with up to 20MHz sampling rate. It uses the [http://dangerousprototypes.com/docs/The_Logic_Sniffer%27s_extended_SUMP_protocol extended SUMP protocol].}}
 
{{hwsup_supported|MCU123 Saleae Logic clone|File:Mcu123 saleae logic clone.png|is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.}}
 
{{hwsup_supported|MCU123 USBee AX Pro clone|File:Usbee_ax_clone_front.png|is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.}}
 
{{hwsup_supported|Openbench Logic Sniffer|File:Openbench logic sniffer front.png|(OLS) is a USB-based (and FPGA-based), 32-channel logic analyzer with up to 100MHz sampling rate and advanced trigger functionality. It is a fully open source device &mdash; the circuit design, VHDL code for the FPGA, firmware for the PIC microcontroller and Java-based client software are all freely available. It uses the [http://dangerousprototypes.com/docs/The_Logic_Sniffer%27s_extended_SUMP_protocol extended SUMP protocol].}}
 
{{hwsup_supported|Robomotic BugLogic 3|File:Robomotic buglogic3.png|is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.}}
 
{{hwsup_supported|Robomotic MiniLogic|File:Robomotic_minilogic.png|is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.}}
 
{{hwsup_supported|Saleae Logic|File:Saleae Logic.png|is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.}}
 
{{hwsup_supported|Saleae Logic16|File:Saleae_Logic16_bottom.png|is a USB-based, 16-channel logic analyzer with 100/50/32/16MHz sampling rate (at 3/6/9/16 enabled channels).}}
 
{{hwsup_supported|WayEngineer Saleae16|File:Wayengineer saleae16.png|is a USB-based, 16-channel logic analyzer with 100/50/32/16MHz sampling rate (at 3/6/9/16 enabled channels).}}
 
{{hwsup_supported|ZEROPLUS Logic Cube LAP-C(16032)|File:Zeroplus Logic Cube.png| is a USB-based, 16-channel logic analyzer with up to 100MHz sampling rate.}}
 
{{hwsup_supported|ZEROPLUS LAP-16128U|File:Zeroplus_lap-16128u.png|is a USB-based, 16-channel logic analyzer with up to 200MHz sampling rate.}}
 
{{hwsup_progress|ChronoVu LA16|File:Chronovu la16.png|is a USB-based, 16-channel logic analyzer with up to 200MHz sampling rate.}}
 
{{hwsup_progress|RockyLogic Ant8|File:Rockylogic_ant8.png|is a USB-based, 8-channel logic analyzer with up to 500MHz sampling rate.}}
 
{{hwsup_progress|RockyLogic Ant18e|File:RockyLogic Ant18e.png|is a USB-based, 18-channel logic analyzer with up to 1GHz sampling rate.}}
 
{{hwsup_planned|Acute PKLA-1216|File:Acute_pkla1216.png|is a USB-based, 16-channel logic analyzer with up to 200MHz sampling rate.}}
 
{{hwsup_planned|Hantek 4032L|File:Hantek4032L_BoxSideView.png|is a USB-based, 32-channel, 400MHz logic analyzer with 2Gbit memory.}}
 
{{hwsup_planned|Ideofy LA-08|File:Ideofy_la_08.png|is a USB-based, 8-channel logic analyzer with a max. samplerate of 96Msps@2ch (or 60msps@4ch, or 30msps@8ch).}}
 
{{hwsup_planned|Intronix Logicport LA1034|File:Intronix Logicport.png|is a USB-based (and FPGA-based), 34-channel logic analyzer with up to 500MHz sampling rate.}}
 
{{hwsup_planned|Link Instruments LA-5580|File:Sigrok_logo_no_text_transparent_512.png|is a USB-based, 80-channel logic analyzer with up to 500MHz samplerate. There's an optional pattern generator pod with 100 Mpoints/s.}}
 
{{hwsup_planned|Microchip PICkit2|File:Microchip_pickit2.png|is a USB-based, 3-channel logic analyzer with up to 1MHz sampling rate.<br /><br />The PICkit2 is actually a programmer/debugger for PIC microcontrollers, but it can also be used as logic analyzer.}}
 
{{hwsup_planned|MiniLA|File:Minila parport.png|is a parallel port based, 32-channel logic analyzer with up to 100MHz sampling rate.}}
 
{{hwsup_planned|MiniLA Mockup|File:Minila_mockup.png|is a USB-based, 32-channel logic analyzer with up to 100MHz sampling rate.}}
 
{{hwsup_planned|Sysclk LWLA1016|File:Sysclk lwla1016.png|is a USB-based, 16-channel logic analyzer with up to 100MHz sampling rate.}}
 
{{hwsup_planned|Sysclk LWLA1034|File:Sysclk lwla1034.jpg|is a USB-based, 34-channel logic analyzer with up to 125MHz sampling rate.}}
 
{{hwsup_planned|TechTools DigiView DV1-100|File:Techtools_digiview_dv1-100.png|is a USB-based, 18-channel logic analyzer with 100MHz sampling rate.}}
 
{{hwsup_planned|XMOS XTAG-2|File:Xmos xtag2.png|is a USB based, ????-channel logic analyzer with up to 50MHz sampling rate.}}
 
{{hwsup_planned|ZEROPLUS Logic Cube LAP-C(322000)|File:Sigrok_logo_no_text_transparent_512.png|is a USB-based, 32-channel logic analyzer with a max. samplerate of 200MHz.}}
 
{{hwsup_planned|ZLG LA1032|File:Zlg_la1032.png|is a USB-based, 32-channel, 100MHz logic analyzer.}}
 
|}


== Mixed-signal devices ==
== Mixed-signal devices ==

Revision as of 23:15, 31 December 2013

sigrok is intended as a flexible, cross-platform, and hardware-independent software suite, i.e., it supports various devices from many different vendors.

Here is a list of currently supported devices (various stages of completeness) and devices we plan to support in the near future.

The lists are sorted by category (supported, in progress, planned), and alphabetically within those categories.

Logic analyzers

Supported:

Work in progress:

Planned:

Mixed-signal devices

Devices which can be used as both logic analyzer and oscilloscopes.

Device Status Comments
Armfly ax pro.png
 Nuvola OK.png
supported 		The ARMFLY AX-Pro is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.

Note: Only the logic analyzer functionality is supported so far, analog support is work in progress.

Esla201a.png
 Nuvola OK.png
supported 		The EE Electronics ESLA201A is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.

Note: Only the logic analyzer functionality is supported so far, analog support is work in progress.

Studio XZL AX.jpeg
 Nuvola OK.png
supported 		The XZL_Studio AX is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, with 2 additional analog channels and an independent trigger pin.

Note: Only the logic analyzer functionality is supported so far, analog support is work in progress, as is trigger.

BitScope BS10.png
 Nuvola Orange.png
in progress 		The BitScope BS10 is a mixed-signal oscilloscope, logic analyzer and spectrum analyzer.
Link Instruments MSO-19 front.png
 Nuvola Orange.png
in progress 		The Link Instruments MSO-19 is a USB-based, 1-channel 2GSa/s oscilloscope, 8-channel 200MSa/s logic analyzer, 100MSa/s pattern generator and a TDR.
Agilent MSO7104A.png
 Nuvola Red.png
planned 		The Agilent MSO7104A is a standalone, 4-channel mixed-signal digital storage oscilloscope (1GHz bandwidth, 4GSa/s samplerate, 16-channel logic analyzer).
Digilent analog discovery.png
 Nuvola Red.png
planned 		The Digilent Analog Discovery is a USB-based 100MSa/s dual channel oscilloscope, function generator, logic analyzer and pattern generator.
Hantek 1008C.png
 Nuvola Red.png
planned 		The Hantek 1008C is a USB-based 8-channel oscilloscope, with 8 channel digital pattern generator
Meilhaus mephisto scope1.png
 Nuvola Red.png
planned 		The Meilhaus MEphisto Scope1 is a USB-based multifunction acquisition device.
Polabs poscope basic2.png
 Nuvola Red.png
planned 		The PoLabs PoScope Basic2 is a USB-based, 16-channel logic analyzer (plus oscilloscope, signal/pattern generator, and more) with up to 8MHz sampling rate.
File:QA100.png
 Nuvola Red.png
planned 		The QuantAsylum QA100 is a USB-based, mixed-mode oscilloscope with 12 digital inputs, 2 analog, 1 trigger and 1 audio waveform generator.
Rigol VS5202D.png
 Nuvola Red.png
planned 		The Rigol VS5202D is a USB-based, 2-channel analog oscilloscope (400MSa/S, 200MHz bandwidth) and 16-channel logic analyzer (200MHz sampling rate).
Sigrok logo no text transparent 512.png
 Nuvola Red.png
planned 		The XZL_Studio DX is a USB-based, 16-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.

Oscilloscopes

Device Status Comments
Fluke Scopemeter 199B.png
 Nuvola OK.png
supported 		The Fluke ScopeMeter 199B is a handheld combined multimeter and oscilloscope. Only the multimeter functionality is supported; the device's slow communication speed does not allow for properly supporting it as an oscilloscope in sigrok.
Hameg hmo1524.png
 Nuvola OK.png
supported 		The Hameg HMO1524 is a USB-/RS232-based, 4-channel oscilloscope with an analog bandwidth of 150MHz and 2GS/s sampling rate.
Hameg HMO2024.png
 Nuvola OK.png
supported 		The Hameg HMO2024 is a USB-/RS232-based, 4-channel oscilloscope with an analog bandwidth of 200MHz and 2GS/s sampling rate.
Hantek DSO-2090.png
 Nuvola OK.png
supported 		The Hantek DSO-2090 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 40MHz and 100MS/s sampling rate.
Rigol DS1052E.png
 Nuvola OK.png
supported 		The Rigol DS1052E is a 50MHz, 1GSa/s, 2-channel digital storage oscilloscope. It can be upgraded to 100MHz analog bandwidth with a software modification.
Rigol ds1102e.png
 Nuvola OK.png
supported 		The Rigol DS1102E is a 100MHz, 1GSa/s, 2-channel digital storage oscilloscope.
Agilent DSO1014A.png
 Nuvola Orange.png
in progress 		The Agilent DSO1014A is a 100MHz, 2GSa/s, 4-channel digital storage oscilloscope.
Focussz fosc21 mugshot.png
 Nuvola Orange.png
in progress 		The Focussz Fosc21 is a USB-serial based, 2-channel oscilloscope with an analog bandwidth of 3kHz and a sampling rate of 8kHz (1 channel) / 4kHz (2 channels).
Hantek dso-5200a device front.png
 Nuvola Orange.png
in progress 		The Hantek DSO-5200A is a USB-based, 2-channel oscilloscope with an analog bandwidth of 200MHz and 250MS/s sampling rate.
OsciPrime.png
 Nuvola Orange.png
in progress 		The Nexus-Computing OsciPrime is a USB-based, 2-channel oscilloscope with an analog bandwidth of 3.3MHz-8MHz. It is 100% open source hardware and software.
Velleman PCSU1000.png
 Nuvola Orange.png
in progress 		The Velleman PCSU1000 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 50MHz and 1GS/s sampling rate.
Dso2250-top.png
 Nuvola Orange.png
in progress 		The Hantek DSO-2250 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 100MHz and 250MS/s sampling rate.
Sigrok logo no text transparent 512.png
 Nuvola Red.png
planned 		The Hantek DSO-1200 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 200MHz and 500MS/s sampling rate (and a multimeter).
Fluke scopemeter123.png
 Nuvola Red.png
planned 		The Fluke ScopeMeter 123 is a handheld, 2-channel oscilloscope with an analog bandwidth of 20MHz and 25MS/s sampling rate.
Picoscope 2203.png
 Nuvola Red.png
planned 		The Pico Technology PicoScope 2203 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 5MHz and 40/20MS/s sampling rate (1-/2-channel one-shot mode).
PicoScope 2205.png
 Nuvola Red.png
planned 		The Pico Technology PicoScope 2205 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 25MHz and 200/100MS/s sampling rate (1-/2-channel one-shot mode).
Picoscope 3206.png
 Nuvola Red.png
planned 		The Pico Technology PicoScope 3206 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 200MHz and 200/100MS/s sampling rate (1-/2-channel one-shot mode).
Picoscope 5203.png
 Nuvola Red.png
planned 		The Pico Technology PicoScope 5203 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 250MHz and 1/0,5GS/s sampling rate (1-/2-channel one-shot mode).
Usbduxfast.png
 Nuvola Red.png
planned 		The Incite Technology USB-DUXfast is an USB-based analog data acquisition device. It supports up to 16 channels at 3MHz.
UNI-T UTD2042C.png
 Nuvola Red.png
planned 		The UNI-T UTD2042C is a USB-/RS232-based, 2-channel oscilloscope with an analog bandwidth of 40MHz and 500MS/s sampling rate.
Voltcraft dso-220 usb.png
 Nuvola Red.png
planned 		The Voltcraft DSO-220 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 20MHz and 60MS/s sampling rate.
Voltcraft DSO-3062C.png
 Nuvola Red.png
planned 		The Voltcraft DSO-3062C is a 60MHz, 1GSa/s, 2-channel digital storage oscilloscope. It can be upgraded to 200MHz analog bandwidth with a software modification.
Rigol DS2072.png
 Nuvola Red.png
planned 		The Rigol DS2072 is a 70MHz, 2GSa/s, 2-channel digital storage oscilloscope.

Multimeters

Device Status Comments
Sigrok logo no text transparent 512.png
 Nuvola OK.png
supported 		The Agilent U1231A is a 6000 counts, CAT III (600V) handheld digital multimeter with USB or Bluetooth connectivity.
Agilent U1232A.png
 Nuvola OK.png
supported 		The Agilent U1232A is a 6000 counts, CAT III (600V) handheld digital multimeter with USB or Bluetooth connectivity.
Sigrok logo no text transparent 512.png
 Nuvola OK.png
supported 		The Agilent U1233A is a 6000 counts, CAT III (600V) handheld digital multimeter with USB or Bluetooth connectivity.
Sigrok logo no text transparent 512.png
 Nuvola OK.png
supported 		The BBC Goertz Metrawatt M2110 is a historic 30000 counts, 1000V bench digital multimeter with RS232 connectivity. It is probably the oldest supported multimeter.
Bm 857 mugshot 500000.png
 Nuvola OK.png
supported 		The Brymen BM857 is a 50000 counts (500000 DC), CAT III (1000V) / CAT IV (600V) handheld digital multimeter with RS232 connectivity.
Digitek dt4000zc device front.png
 Nuvola OK.png
supported 		The Digitek DT4000ZC is a 4000 counts, CAT II (600V) handheld digital multimeter with RS232 connectivity.
Fluke 187.png
 Nuvola OK.png
supported 		The Fluke 187/189 are 50000 counts, handheld digital multimeters with RS232 connectivity.
Fluke 287.png
 Nuvola OK.png
supported 		The Fluke 287/289 are 50000 counts handheld digital multimeters with RS232 connectivity.
Gossen Metrawatt Metrahit 16I small.png
 Nuvola OK.png
supported 		The Gossen Metrawatt Metrahit 16I is a 3100 counts, handheld digital multimeter with insulation measurement and IR/RS232 connectivity.
Gossen Metrawatt Metrahit 18S small.png
 Nuvola OK.png
supported 		The Gossen Metrawatt Metrahit 18S is a 31000 counts, handheld digital multimeter with IR/RS232 connectivity.
100px Idm103n.png
 Nuvola OK.png
supported 		The ISO-TECH IDM103N is a 4000 counts, handheld digital multimeter with RS232 connectivity.
Mastech mas345 device front.png
 Nuvola OK.png
supported 		The MASTECH MAS345 is a 4000 counts, CAT II handheld digital multimeter with RS232 connectivity.
Norma dm950.png
 Nuvola OK.png
supported 		The Norma DM950 is a 21000 counts, handheld digital multimeter with RS232 connectivity.
Pce-pce-dm32.png
 Nuvola OK.png
supported 		The PCE PCE-DM32 is a 4000 counts, CAT III (1000V) / CAT IV (600V) handheld digital multimeter with RS232 connectivity.
Metex me-31.png
 Nuvola OK.png
supported 		The PeakTech 3410 is a 4000 counts, CAT II (1000V) handheld digital multimeter with RS232 connectivity.
Peaktech 4370 device front.png
 Nuvola OK.png
supported 		The PeakTech 4370 is a 2000 counts, CAT II (1000V) handheld digital multimeter with RS232 connectivity.
Rs 22 168 mugshot.png
 Nuvola OK.png
supported 		The RadioShack 22-168 is a 2000 counts, handheld digital multimeter with RS232 connectivity.
Rs 22-805 front.png
 Nuvola OK.png
supported 		The RadioShack 22-805 is a 4000 counts, CAT II (600V) handheld digital multimeter with RS232 connectivity.
Radioshack 22 812 front.png
 Nuvola OK.png
supported 		The RadioShack 22-812 is a 4000 counts, CAT II (600V) handheld digital multimeter with RS232 connectivity.
Siemens B1105 small.png
 Nuvola OK.png
supported 		The Siemens B1105 is a 310000 counts, handheld digital multimeter with IR/RS232 connectivity.
Tecpel dmm8061.png
 Nuvola OK.png
supported 		The Tecpel DMM-8061 is a 4000 counts, CAT IV (600V) handheld digital multimeter with RS232 or USB connectivity.
Tp4000zc front.png
 Nuvola OK.png
supported 		The TekPower TP4000ZC is a 4000 counts, CAT II (600V) handheld digital multimeter with RS232 connectivity.
Ut60e - front - alpha.png
 Nuvola OK.png
supported 		The UNI-T UT60E is a 4000 counts, CAT III (1000V) / CAT IV (600V) handheld digital multimeter with RS232 or USB connectivity.
Uni-t ut61c mugshot.png
 Nuvola OK.png
supported 		The UNI-T UT61C is a 6000 counts, CAT II (600V) / CAT III (300V) handheld digital multimeter with RS232 or USB connectivity.
Uni t ut61d device.png
 Nuvola OK.png
supported 		The UNI-T UT61D is a 6000 counts, CAT II (600V) / CAT III (300V) handheld digital multimeter with RS232 or USB connectivity.
Old ver front.png
 Nuvola OK.png
supported 		The UNI-T UT61E is a 22000 counts, CAT II (600V) / CAT III (300V) handheld digital multimeter with RS232 or USB connectivity.
Va va18b.png
 Nuvola OK.png
supported 		The V&A VA18B is a 6000 counts, CAT II (1000V) handheld digital multimeter with USB connectivity.
Victor 86c device front.png
 Nuvola OK.png
supported 		The Victor 86C is a 4000 counts, CAT III (1000V) handheld digital multimeter with USB connectivity.
Victor 70C.png
 Nuvola OK.png
supported 		The Victor 70C is a 4000 counts, CAT II handheld digital multimeter with USB connectivity.
Voltcraft M-3650D transparent.png
 Nuvola OK.png
supported 		The Voltcraft M-3650D is a 2000 counts, handheld digital multimeter with RS232 connectivity.
Voltcraft m4650cr.png
 Nuvola OK.png
supported 		The Voltcraft M-4650CR is a 20000 counts, handheld digital multimeter with RS232 connectivity.
Voltcraft vc820 device.png
 Nuvola OK.png
supported 		The Voltcraft VC-820 is a 4000 counts, CAT III (1000V) / CAT IV (600V) handheld digital multimeter with RS232 or USB connectivity.
Voltcraft vc830.png
 Nuvola OK.png
supported 		The Voltcraft VC-830 is a 6000 counts, CAT III (1000V) / CAT IV (600V) handheld digital multimeter with RS232 or USB connectivity.
Voltcraft vc840 device front.png
 Nuvola OK.png
supported 		The Voltcraft VC-840 is a 4000 counts, CAT IV (600V) handheld digital multimeter with RS232 or USB connectivity.
Tenma 72-1016.png
 Nuvola Orange.png
in progress 		The Tenma 72-1016 is a 6000 count bench multimeter with RS232/USB connectivity.
Tenma 72-7730.png
 Nuvola Orange.png
in progress 		The Tenma 72-7730 is a 20000 count handheld digital multimeter with USB connectivity.
Tenma 72-7732.png
 Nuvola Orange.png
in progress 		The Tenma 72-7732 is a 40000 count handheld digital multimeter with USB connectivity.
Tenma 72-7745.png
 Nuvola OK.png
supported 		The Tenma 72-7745 is a 4000 count handheld digital multimeter with RS232/USB connectivity.
Tenma 72-7750.png
 Nuvola Orange.png
in progress 		The Tenma 72-7750 is a 6000 count handheld digital multimeter with RS232/USB connectivity.
Tenma 72-9380A.png
 Nuvola Orange.png
in progress 		The Tenma 72-9380A is a 40000 count handheld digital multimeter with USB connectivity.
Voltcraft m-3650cr.png
 Nuvola Orange.png
in progress 		The Voltcraft M-3650CR is a 2000 counts, handheld digital multimeter with RS232 connectivity.
Appa 107.png
 Nuvola Red.png
planned 		The APPA 107 is a 4000 / 20000 counts, handheld digital multimeter with RS232 connectivity.
Digitek dt8000.png
 Nuvola Red.png
planned 		The Digitek DT8000 is a 8000 counts, handheld digital multimeter with RS232 connectivity.
Digitek dt80000.png
 Nuvola Red.png
planned 		The Digitek DT80000 is a 80000 counts, handheld digital multimeter with RS232 connectivity.
Escort 179 device front.png
 Nuvola Red.png
planned 		The Escort 179 is a 10000 counts, handheld digital multimeter with RS232 connectivity.
Gossen metrahit 30m.png
 Nuvola Red.png
planned 		The Gossen-Metrawatt METRAHIT 30M is a 1200000 counts, CAT II (600V) / CAT III (300V) handheld digital multimeter with RS232 or USB connectivity.
800px-Mastech m9803r device front.png
 Nuvola Red.png
planned 		The MASTECH M9803R is a 4000 counts, CAT II (1000V) digital bench multimeter with RS232 connectivity.
Metrix mx53.png
 Nuvola Red.png
planned 		The Metrix MX53 is a 50000 counts, handheld digital multimeter with RS232 connectivity.
Metrix mx56c.png
 Nuvola Red.png
planned 		The Metrix MX56C is a 50000 counts, handheld digital multimeter with RS232 connectivity.
Sigrok logo no text transparent 512.png
 Nuvola Red.png
planned 		The Protek 6500 is a 50000 counts handheld digital multimeter with RS232 connectivity.
Voltcraft m3890dt usb.png
 Nuvola Red.png
planned 		The Voltcraft M-3890DT is a 4000 counts, CAT II handheld digital multimeter with USB connectivity.
Voltcraft m4660a device front.png
 Nuvola Red.png
planned 		The Voltcraft M-4660A is a 20000 counts, handheld digital multimeter with RS232 connectivity.
Voltcraft vc920.png
 Nuvola Red.png
planned 		The Voltcraft VC-920 is a 40000/4000 counts, handheld digital multimeter with RS232 or USB connectivity.
Voltcraft vc940.png
 Nuvola Red.png
planned 		The Voltcraft VC-940 is a 40000/4000 counts, handheld digital multimeter with RS232 or USB connectivity.

LCR meters

TODO.

Sound level meters

Device Status Comments
CEM DT-8852.png
 Nuvola OK.png
supported 		The CEM DT-8852 is an IEC 61672-1 class 2-compliant sound level meter with USB connectivity.
Colead SL-5868P.png
 Nuvola OK.png
supported 		The Colead SL-5868P is a sound level meter with RS232 connectivity.
Kecheng KC-330B.png
 Nuvola OK.png
supported 		The Kecheng KC-330B is a cheap sound level data logger with USB interface.
Tondaj sl-814.png
 Nuvola OK.png
supported 		The Tondaj SL-814 is a sound level meter with USB connectivity.
Voltcraft DL-161S.png
 Nuvola Orange.png
in progress 		The Voltcraft DL-161S is a sound level meter with USB connectivity.
Pce pce-222 front.png
 Nuvola Red.png
planned 		The PCE PCE-222 is a multi-function measurement device (light meter, thermometer, hygrometer, and sound level meter) with RS232 connectivity.
Voltcraft dl 160s.png
 Nuvola Red.png
planned 		The Voltcraft DL-160S is a sound level meter with USB connectivity.

Thermometers

Device Status Comments
EL-USB-2.png
 Nuvola OK.png
supported 		The Lascar Electronics EL-USB-2 is a USB-based temperature and humidity logger.
Mic 98581.png
 Nuvola OK.png
supported 		The MIC 98581 is a USB-based temperature logger.
Mic 98583.png
 Nuvola OK.png
supported 		The MIC 98583 is a USB-based temperature and humidity logger.
Uni-t ut325 front.png
 Nuvola OK.png
supported 		The UNI-T UT325 is a dual thermocouple logging thermometer.
Voltcraft k204.png
 Nuvola OK.png
supported 		The Voltcraft K204 is a 4-channel temperature logger with RS232 connectivity.
Rs55ii.png
 Nuvola Red.png
planned 		The APPA 55II is a 2-channel temperature logger with optical RS-232.
Elitech rc3.png
 Nuvola Red.png
planned 		The Elitech RC-3 is a USB-based temperature logger.
Pce pce-222 front.png
 Nuvola Red.png
planned 		The PCE PCE-222 is a multi-function measurement device (light meter, thermometer, hygrometer, and sound level meter) with RS232 connectivity.
Rding temper front.png
 Nuvola Red.png
planned 		The RDing TEMPer is a USB-based temperature logger.
Rding temper gold device front.png
 Nuvola Red.png
planned 		The RDing TEMPer Gold is a USB-based temperature logger.
Rding temper1 device front.png
 Nuvola Red.png
planned 		The RDing TEMPer1 is a USB-based temperature logger.
Pcsensor temper1k2.png
 Nuvola Red.png
planned 		The RDing TEMPer1K2 is a USB-based temperature logger.
Voltcraft dl-120th.png
 Nuvola Red.png
planned 		The Voltcraft DL-120TH is a USB-based temperature logger.
Voltcraft dl-140th.png
 Nuvola Red.png
planned 		The Voltcraft DL-140TH is a USB-based temperature logger.

Hygrometers

Device Status Comments
EL-USB-2.png
 Nuvola OK.png
supported 		The Lascar Electronics EL-USB-2 is a USB-based temperature and humidity logger.
Mic 98583.png
 Nuvola OK.png
supported 		The MIC 98583 is a USB-based temperature and humidity logger.
Pce pce-222 front.png
 Nuvola Red.png
planned 		The PCE PCE-222 is a multi-function measurement device (light meter, thermometer, hygrometer, and sound level meter) with RS232 connectivity.
Silabs si7005usb dgl eb top.jpg
 Nuvola Red.png
planned 		The SiLabs Si7005USB-Dongle is a USB-based temperature and humidity logger.

Anemometers

Device Status Comments
Mastech ms6252b.png
 Nuvola Red.png
planned 		The MASTECH MS6252B an anemometer with USB connectivity.

Light meters

Device Status Comments
Lutron YK-2005LX.png
 Nuvola Red.png
planned 		The Lutron YK-2005LX is a light meter with RS232 connectivity.
Pce pce-222 front.png
 Nuvola Red.png
planned 		The PCE PCE-222 is a multi-function measurement device (light meter, thermometer, hygrometer, and sound level meter) with RS232 connectivity.

Energy meters

Device Status Comments
Actaris a14c5 teleinfo.png
 Nuvola OK.png
supported 		The EDF Teleinfo is a French standard energy meter protocol.

DAQs

Device Status Comments
Ni usb 6008.png
 Nuvola Red.png
planned 		The NI USB-6008 is a USB-based DAQ with 8 analog inputs (12 bits, max. 10kS/s), 2 analog outputs (12 bits, 150Hz update rate), and 12 digital I/Os.

Dataloggers

Device Status Comments
EL-USB-CO.png
 Nuvola OK.png
supported 		The Lascar Electronics EL-USB-CO is a standalone carbon monoxide (CO) logger.
Gsg indoor air monitor.png
 Nuvola Red.png
planned 		The GSG Indoor Air Monitor is a USB-based air quality monitor.
Maul studio i.png
 Nuvola Red.png
planned 		The MAUL studio i is an RS232-based weighing scale.
Voltcraft co-20.png
 Nuvola Red.png
planned 		The Voltcraft CO-20 is a USB-based air quality monitor.

Function generators

Device Status Comments
Hantek DDS-3X25 top.png
 Nuvola Red.png
planned 		The Hantek DDS-3X25 is a 25MHz PC-based function generator (requires a USB connection to work).
Siglent sdg1010 device front 8116.png
 Nuvola Red.png
planned 		The Siglent SDG1010 is a 10MHz function generator with USB connectivity.

RF receivers

Device Status Comments
Sigrok logo no text transparent 512.png
 Nuvola Orange.png
in progress 		The Per Vices Noctar is a PCIe IQ modulator/demodulator board.

Spectrum analyzers

TODO.

Power supplies

Device Status Comments
Manson hcs3202.png
 Nuvola Red.png
planned 		The Manson HCS-3202 is a 1-channel programmable power supply (1-36V/0-10A) with USB connectivity.

GPIB interfaces

Device Status Comments
Beiming s82357.png
 Nuvola Red.png
planned 		The Beiming S82357 is a USB-based, hardware-implemented GPIB interface (a clone of the Agilent 82357B USB/GPIB interface).
ICS 488-USB.png
 Nuvola Red.png
planned 		The ICS 488-USB is a USB-based, hardware-implemented GPIB interface.
GPIB-USB 82357B clone.png
 Nuvola Red.png
planned 		The GPIB-USB 82357B clone is a USB-based, hardware-implemented GPIB interface (a clone of the Agilent 82357B USB/GPIB interface).
NI GPIB-ENET.png
 Nuvola Red.png
planned 		The National Instruments GPIB-ENET is an Ethernet-based, hardware-implemented GPIB interface.
NI GPIB-USB-HS.png
 Nuvola Red.png
planned 		The National Instruments GPIB-USB-HS is a USB-based, hardware-implemented GPIB interface.
Prologix-usb.png
 Nuvola Red.png
planned 		The Prologix GPIB-USB is a USB-based, firmware-implemented GPIB interface.

Potential other candidates

If you own any other logic analyzers, oscilloscopes, multimeters, dataloggers, ... and want to add support for them in sigrok (or donate/lend devices to developers), please let us know. We're always happy to add more hardware support! Join the mailing list or ask on IRC #sigrok if you want to help out.


Retrieved from "https://sigrok.org/w/index.php?title=Supported_hardware&oldid=7952"