]>
Commit | Line | Data |
---|---|---|
28a35d8a | 1 | /* |
50985c20 | 2 | * This file is part of the libsigrok project. |
28a35d8a | 3 | * |
868501fa | 4 | * Copyright (C) 2010-2012 Håvard Espeland <gus@ping.uio.no>, |
911f1834 UH |
5 | * Copyright (C) 2010 Martin Stensgård <mastensg@ping.uio.no> |
6 | * Copyright (C) 2010 Carl Henrik Lunde <chlunde@ping.uio.no> | |
9334ed6c | 7 | * Copyright (C) 2020 Gerhard Sittig <gerhard.sittig@gmx.net> |
28a35d8a HE |
8 | * |
9 | * This program is free software: you can redistribute it and/or modify | |
10 | * it under the terms of the GNU General Public License as published by | |
11 | * the Free Software Foundation, either version 3 of the License, or | |
12 | * (at your option) any later version. | |
13 | * | |
14 | * This program is distributed in the hope that it will be useful, | |
15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
17 | * GNU General Public License for more details. | |
18 | * | |
19 | * You should have received a copy of the GNU General Public License | |
20 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
21 | */ | |
22 | ||
911f1834 | 23 | /* |
6352d030 | 24 | * ASIX SIGMA/SIGMA2 logic analyzer driver |
911f1834 UH |
25 | */ |
26 | ||
6ec6c43b | 27 | #include <config.h> |
3ba56876 | 28 | #include "protocol.h" |
28a35d8a | 29 | |
b1648dea | 30 | /* |
b65649f6 GS |
31 | * The ASIX SIGMA hardware supports fixed 200MHz and 100MHz sample rates |
32 | * (by means of separate firmware images). As well as 50MHz divided by | |
33 | * an integer divider in the 1..256 range (by the "typical" firmware). | |
34 | * Which translates to a strict lower boundary of around 195kHz. | |
35 | * | |
36 | * This driver "suggests" a subset of the available rates by listing a | |
37 | * few discrete values, while setter routines accept any user specified | |
38 | * rate that is supported by the hardware. | |
b1648dea | 39 | */ |
abcd4771 | 40 | static const uint64_t samplerates[] = { |
b65649f6 GS |
41 | /* 50MHz and integer divider. 1/2/5 steps (where possible). */ |
42 | SR_KHZ(200), SR_KHZ(500), | |
43 | SR_MHZ(1), SR_MHZ(2), SR_MHZ(5), | |
44 | SR_MHZ(10), SR_MHZ(25), SR_MHZ(50), | |
45 | /* 100MHz/200MHz, fixed rates in special firmware. */ | |
46 | SR_MHZ(100), SR_MHZ(200), | |
28a35d8a HE |
47 | }; |
48 | ||
abcd4771 GS |
49 | SR_PRIV GVariant *sigma_get_samplerates_list(void) |
50 | { | |
51 | return std_gvar_samplerates(samplerates, ARRAY_SIZE(samplerates)); | |
52 | } | |
39c64c6a | 53 | |
742368a2 | 54 | static const char *firmware_files[] = { |
80e717b3 GS |
55 | [SIGMA_FW_50MHZ] = "asix-sigma-50.fw", /* 50MHz, 8bit divider. */ |
56 | [SIGMA_FW_100MHZ] = "asix-sigma-100.fw", /* 100MHz, fixed. */ | |
57 | [SIGMA_FW_200MHZ] = "asix-sigma-200.fw", /* 200MHz, fixed. */ | |
58 | [SIGMA_FW_SYNC] = "asix-sigma-50sync.fw", /* Sync from external pin. */ | |
59 | [SIGMA_FW_FREQ] = "asix-sigma-phasor.fw", /* Frequency counter. */ | |
f6564c8d HE |
60 | }; |
61 | ||
742368a2 GS |
62 | #define SIGMA_FIRMWARE_SIZE_LIMIT (256 * 1024) |
63 | ||
7fe1f91f GS |
64 | static int sigma_ftdi_open(const struct sr_dev_inst *sdi) |
65 | { | |
66 | struct dev_context *devc; | |
67 | int vid, pid; | |
68 | const char *serno; | |
69 | int ret; | |
70 | ||
71 | devc = sdi->priv; | |
72 | if (!devc) | |
73 | return SR_ERR_ARG; | |
74 | ||
75 | if (devc->ftdi.is_open) | |
76 | return SR_OK; | |
77 | ||
78 | vid = devc->id.vid; | |
79 | pid = devc->id.pid; | |
80 | serno = sdi->serial_num; | |
81 | if (!vid || !pid || !serno || !*serno) | |
82 | return SR_ERR_ARG; | |
83 | ||
84 | ret = ftdi_init(&devc->ftdi.ctx); | |
85 | if (ret < 0) { | |
86 | sr_err("Cannot initialize FTDI context (%d): %s.", | |
87 | ret, ftdi_get_error_string(&devc->ftdi.ctx)); | |
88 | return SR_ERR_IO; | |
89 | } | |
90 | ret = ftdi_usb_open_desc_index(&devc->ftdi.ctx, | |
91 | vid, pid, NULL, serno, 0); | |
92 | if (ret < 0) { | |
93 | sr_err("Cannot open device (%d): %s.", | |
94 | ret, ftdi_get_error_string(&devc->ftdi.ctx)); | |
95 | return SR_ERR_IO; | |
96 | } | |
97 | devc->ftdi.is_open = TRUE; | |
98 | ||
99 | return SR_OK; | |
100 | } | |
101 | ||
102 | static int sigma_ftdi_close(struct dev_context *devc) | |
103 | { | |
104 | int ret; | |
105 | ||
106 | ret = ftdi_usb_close(&devc->ftdi.ctx); | |
107 | devc->ftdi.is_open = FALSE; | |
108 | devc->ftdi.must_close = FALSE; | |
109 | ftdi_deinit(&devc->ftdi.ctx); | |
110 | ||
111 | return ret == 0 ? SR_OK : SR_ERR_IO; | |
112 | } | |
113 | ||
114 | SR_PRIV int sigma_check_open(const struct sr_dev_inst *sdi) | |
115 | { | |
116 | struct dev_context *devc; | |
117 | int ret; | |
118 | ||
119 | if (!sdi) | |
120 | return SR_ERR_ARG; | |
121 | devc = sdi->priv; | |
122 | if (!devc) | |
123 | return SR_ERR_ARG; | |
124 | ||
125 | if (devc->ftdi.is_open) | |
126 | return SR_OK; | |
127 | ||
128 | ret = sigma_ftdi_open(sdi); | |
129 | if (ret != SR_OK) | |
130 | return ret; | |
131 | devc->ftdi.must_close = TRUE; | |
132 | ||
133 | return ret; | |
134 | } | |
135 | ||
136 | SR_PRIV int sigma_check_close(struct dev_context *devc) | |
137 | { | |
138 | int ret; | |
139 | ||
140 | if (!devc) | |
141 | return SR_ERR_ARG; | |
142 | ||
143 | if (devc->ftdi.must_close) { | |
144 | ret = sigma_ftdi_close(devc); | |
145 | if (ret != SR_OK) | |
146 | return ret; | |
147 | devc->ftdi.must_close = FALSE; | |
148 | } | |
149 | ||
150 | return SR_OK; | |
151 | } | |
152 | ||
153 | SR_PRIV int sigma_force_open(const struct sr_dev_inst *sdi) | |
154 | { | |
155 | struct dev_context *devc; | |
156 | int ret; | |
157 | ||
158 | if (!sdi) | |
159 | return SR_ERR_ARG; | |
160 | devc = sdi->priv; | |
161 | if (!devc) | |
162 | return SR_ERR_ARG; | |
163 | ||
164 | ret = sigma_ftdi_open(sdi); | |
165 | if (ret != SR_OK) | |
166 | return ret; | |
167 | devc->ftdi.must_close = FALSE; | |
168 | ||
169 | return SR_OK; | |
170 | } | |
171 | ||
172 | SR_PRIV int sigma_force_close(struct dev_context *devc) | |
173 | { | |
174 | return sigma_ftdi_close(devc); | |
175 | } | |
176 | ||
88a5f9ea GS |
177 | /* |
178 | * BEWARE! Error propagation is important, as are kinds of return values. | |
179 | * | |
180 | * - Raw USB tranport communicates the number of sent or received bytes, | |
181 | * or negative error codes in the external library's(!) range of codes. | |
182 | * - Internal routines at the "sigrok driver level" communicate success | |
183 | * or failure in terms of SR_OK et al error codes. | |
184 | * - Main loop style receive callbacks communicate booleans which arrange | |
185 | * for repeated calls to drive progress during acquisition. | |
186 | * | |
187 | * Careful consideration by maintainers is essential, because all of the | |
188 | * above kinds of values are assignment compatbile from the compiler's | |
189 | * point of view. Implementation errors will go unnoticed at build time. | |
190 | */ | |
191 | ||
192 | static int sigma_read_raw(struct dev_context *devc, void *buf, size_t size) | |
28a35d8a HE |
193 | { |
194 | int ret; | |
fefa1800 | 195 | |
7fe1f91f | 196 | ret = ftdi_read_data(&devc->ftdi.ctx, (unsigned char *)buf, size); |
28a35d8a | 197 | if (ret < 0) { |
88a5f9ea | 198 | sr_err("USB data read failed: %s", |
7fe1f91f | 199 | ftdi_get_error_string(&devc->ftdi.ctx)); |
28a35d8a HE |
200 | } |
201 | ||
202 | return ret; | |
203 | } | |
204 | ||
88a5f9ea | 205 | static int sigma_write_raw(struct dev_context *devc, const void *buf, size_t size) |
28a35d8a HE |
206 | { |
207 | int ret; | |
fefa1800 | 208 | |
7fe1f91f | 209 | ret = ftdi_write_data(&devc->ftdi.ctx, buf, size); |
88a5f9ea GS |
210 | if (ret < 0) { |
211 | sr_err("USB data write failed: %s", | |
7fe1f91f | 212 | ftdi_get_error_string(&devc->ftdi.ctx)); |
88a5f9ea GS |
213 | } else if ((size_t)ret != size) { |
214 | sr_err("USB data write length mismatch."); | |
215 | } | |
28a35d8a HE |
216 | |
217 | return ret; | |
218 | } | |
219 | ||
88a5f9ea GS |
220 | static int sigma_read_sr(struct dev_context *devc, void *buf, size_t size) |
221 | { | |
222 | int ret; | |
223 | ||
224 | ret = sigma_read_raw(devc, buf, size); | |
225 | if (ret < 0 || (size_t)ret != size) | |
226 | return SR_ERR_IO; | |
227 | ||
228 | return SR_OK; | |
229 | } | |
230 | ||
231 | static int sigma_write_sr(struct dev_context *devc, const void *buf, size_t size) | |
232 | { | |
233 | int ret; | |
234 | ||
235 | ret = sigma_write_raw(devc, buf, size); | |
236 | if (ret < 0 || (size_t)ret != size) | |
237 | return SR_ERR_IO; | |
238 | ||
239 | return SR_OK; | |
240 | } | |
241 | ||
e8686e3a | 242 | /* |
88a5f9ea GS |
243 | * Implementor's note: The local write buffer's size shall suffice for |
244 | * any know FPGA register transaction that is involved in the supported | |
245 | * feature set of this sigrok device driver. If the length check trips, | |
246 | * that's a programmer's error and needs adjustment in the complete call | |
247 | * stack of the respective code path. | |
e8686e3a | 248 | */ |
0f017b7d GS |
249 | #define SIGMA_MAX_REG_DEPTH 32 |
250 | ||
251 | /* | |
252 | * Implementor's note: The FPGA command set supports register access | |
253 | * with automatic address adjustment. This operation is documented to | |
254 | * wrap within a 16-address range, it cannot cross boundaries where the | |
255 | * register address' nibble overflows. An internal helper assumes that | |
256 | * callers remain within this auto-adjustment range, and thus multi | |
257 | * register access requests can never exceed that count. | |
258 | */ | |
259 | #define SIGMA_MAX_REG_COUNT 16 | |
260 | ||
9b4d261f GS |
261 | SR_PRIV int sigma_write_register(struct dev_context *devc, |
262 | uint8_t reg, uint8_t *data, size_t len) | |
28a35d8a | 263 | { |
0f017b7d | 264 | uint8_t buf[2 + SIGMA_MAX_REG_DEPTH * 2], *wrptr; |
88a5f9ea | 265 | size_t idx; |
28a35d8a | 266 | |
0f017b7d | 267 | if (len > SIGMA_MAX_REG_DEPTH) { |
88a5f9ea | 268 | sr_err("Short write buffer for %zu bytes to reg %u.", len, reg); |
e8686e3a AG |
269 | return SR_ERR_BUG; |
270 | } | |
271 | ||
a53b8e4d | 272 | wrptr = buf; |
0f017b7d GS |
273 | write_u8_inc(&wrptr, REG_ADDR_LOW | LO4(reg)); |
274 | write_u8_inc(&wrptr, REG_ADDR_HIGH | HI4(reg)); | |
a53b8e4d | 275 | for (idx = 0; idx < len; idx++) { |
0f017b7d GS |
276 | write_u8_inc(&wrptr, REG_DATA_LOW | LO4(data[idx])); |
277 | write_u8_inc(&wrptr, REG_DATA_HIGH_WRITE | HI4(data[idx])); | |
28a35d8a HE |
278 | } |
279 | ||
88a5f9ea | 280 | return sigma_write_sr(devc, buf, wrptr - buf); |
28a35d8a HE |
281 | } |
282 | ||
9b4d261f GS |
283 | SR_PRIV int sigma_set_register(struct dev_context *devc, |
284 | uint8_t reg, uint8_t value) | |
28a35d8a | 285 | { |
9b4d261f | 286 | return sigma_write_register(devc, reg, &value, sizeof(value)); |
28a35d8a HE |
287 | } |
288 | ||
9b4d261f GS |
289 | static int sigma_read_register(struct dev_context *devc, |
290 | uint8_t reg, uint8_t *data, size_t len) | |
28a35d8a | 291 | { |
a53b8e4d | 292 | uint8_t buf[3], *wrptr; |
88a5f9ea | 293 | int ret; |
28a35d8a | 294 | |
a53b8e4d | 295 | wrptr = buf; |
0f017b7d GS |
296 | write_u8_inc(&wrptr, REG_ADDR_LOW | LO4(reg)); |
297 | write_u8_inc(&wrptr, REG_ADDR_HIGH | HI4(reg)); | |
a53b8e4d | 298 | write_u8_inc(&wrptr, REG_READ_ADDR); |
88a5f9ea GS |
299 | ret = sigma_write_sr(devc, buf, wrptr - buf); |
300 | if (ret != SR_OK) | |
301 | return ret; | |
28a35d8a | 302 | |
88a5f9ea | 303 | return sigma_read_sr(devc, data, len); |
28a35d8a HE |
304 | } |
305 | ||
0f017b7d GS |
306 | static int sigma_get_register(struct dev_context *devc, |
307 | uint8_t reg, uint8_t *data) | |
308 | { | |
309 | return sigma_read_register(devc, reg, data, sizeof(*data)); | |
310 | } | |
311 | ||
312 | static int sigma_get_registers(struct dev_context *devc, | |
313 | uint8_t reg, uint8_t *data, size_t count) | |
314 | { | |
315 | uint8_t buf[2 + SIGMA_MAX_REG_COUNT], *wrptr; | |
316 | size_t idx; | |
317 | int ret; | |
318 | ||
319 | if (count > SIGMA_MAX_REG_COUNT) { | |
320 | sr_err("Short command buffer for %zu reg reads at %u.", count, reg); | |
321 | return SR_ERR_BUG; | |
322 | } | |
323 | ||
324 | wrptr = buf; | |
325 | write_u8_inc(&wrptr, REG_ADDR_LOW | LO4(reg)); | |
326 | write_u8_inc(&wrptr, REG_ADDR_HIGH | HI4(reg)); | |
327 | for (idx = 0; idx < count; idx++) | |
328 | write_u8_inc(&wrptr, REG_READ_ADDR | REG_ADDR_INC); | |
329 | ret = sigma_write_sr(devc, buf, wrptr - buf); | |
330 | if (ret != SR_OK) | |
331 | return ret; | |
332 | ||
333 | return sigma_read_sr(devc, data, count); | |
334 | } | |
335 | ||
9b4d261f | 336 | static int sigma_read_pos(struct dev_context *devc, |
88a5f9ea | 337 | uint32_t *stoppos, uint32_t *triggerpos, uint8_t *mode) |
28a35d8a | 338 | { |
88a5f9ea | 339 | uint8_t result[7]; |
0f017b7d | 340 | const uint8_t *rdptr; |
88a5f9ea GS |
341 | uint32_t v32; |
342 | uint8_t v8; | |
343 | int ret; | |
28a35d8a | 344 | |
0f017b7d GS |
345 | /* |
346 | * Read 7 registers starting at trigger position LSB. | |
347 | * Which yields two 24bit counter values, and mode flags. | |
348 | */ | |
349 | ret = sigma_get_registers(devc, READ_TRIGGER_POS_LOW, | |
350 | result, sizeof(result)); | |
88a5f9ea GS |
351 | if (ret != SR_OK) |
352 | return ret; | |
28a35d8a | 353 | |
a53b8e4d | 354 | rdptr = &result[0]; |
88a5f9ea GS |
355 | v32 = read_u24le_inc(&rdptr); |
356 | if (triggerpos) | |
357 | *triggerpos = v32; | |
358 | v32 = read_u24le_inc(&rdptr); | |
359 | if (stoppos) | |
360 | *stoppos = v32; | |
361 | v8 = read_u8_inc(&rdptr); | |
362 | if (mode) | |
363 | *mode = v8; | |
28a35d8a | 364 | |
dc400817 | 365 | /* |
a53b8e4d GS |
366 | * These positions consist of "the memory row" in the MSB fields, |
367 | * and "an event index" within the row in the LSB fields. Part | |
368 | * of the memory row's content is sample data, another part is | |
369 | * timestamps. | |
2c33b092 | 370 | * |
a53b8e4d GS |
371 | * The retrieved register values point to after the captured |
372 | * position. So they need to get decremented, and adjusted to | |
373 | * cater for the timestamps when the decrement carries over to | |
374 | * a different memory row. | |
dc400817 | 375 | */ |
88a5f9ea | 376 | if (stoppos && (--*stoppos & ROW_MASK) == ROW_MASK) |
a53b8e4d | 377 | *stoppos -= CLUSTERS_PER_ROW; |
88a5f9ea | 378 | if (triggerpos && (--*triggerpos & ROW_MASK) == ROW_MASK) |
a53b8e4d | 379 | *triggerpos -= CLUSTERS_PER_ROW; |
57bbf56b | 380 | |
a53b8e4d | 381 | return SR_OK; |
28a35d8a HE |
382 | } |
383 | ||
9b4d261f GS |
384 | static int sigma_read_dram(struct dev_context *devc, |
385 | uint16_t startchunk, size_t numchunks, uint8_t *data) | |
28a35d8a | 386 | { |
0f017b7d | 387 | uint8_t buf[128], *wrptr, regval; |
07411a60 | 388 | size_t chunk; |
88a5f9ea | 389 | int sel, ret; |
07411a60 | 390 | gboolean is_last; |
28a35d8a | 391 | |
a53b8e4d | 392 | if (2 + 3 * numchunks > ARRAY_SIZE(buf)) { |
88a5f9ea | 393 | sr_err("Short write buffer for %zu DRAM row reads.", numchunks); |
a53b8e4d GS |
394 | return SR_ERR_BUG; |
395 | } | |
396 | ||
07411a60 | 397 | /* Communicate DRAM start address (memory row, aka samples line). */ |
a53b8e4d | 398 | wrptr = buf; |
0f017b7d | 399 | write_u16be_inc(&wrptr, startchunk); |
88a5f9ea GS |
400 | ret = sigma_write_register(devc, WRITE_MEMROW, buf, wrptr - buf); |
401 | if (ret != SR_OK) | |
402 | return ret; | |
28a35d8a | 403 | |
07411a60 GS |
404 | /* |
405 | * Access DRAM content. Fetch from DRAM to FPGA's internal RAM, | |
406 | * then transfer via USB. Interleave the FPGA's DRAM access and | |
407 | * USB transfer, use alternating buffers (0/1) in the process. | |
408 | */ | |
a53b8e4d GS |
409 | wrptr = buf; |
410 | write_u8_inc(&wrptr, REG_DRAM_BLOCK); | |
411 | write_u8_inc(&wrptr, REG_DRAM_WAIT_ACK); | |
07411a60 GS |
412 | for (chunk = 0; chunk < numchunks; chunk++) { |
413 | sel = chunk % 2; | |
414 | is_last = chunk == numchunks - 1; | |
0f017b7d GS |
415 | if (!is_last) { |
416 | regval = REG_DRAM_BLOCK | REG_DRAM_SEL_BOOL(!sel); | |
417 | write_u8_inc(&wrptr, regval); | |
418 | } | |
419 | regval = REG_DRAM_BLOCK_DATA | REG_DRAM_SEL_BOOL(sel); | |
420 | write_u8_inc(&wrptr, regval); | |
07411a60 | 421 | if (!is_last) |
a53b8e4d | 422 | write_u8_inc(&wrptr, REG_DRAM_WAIT_ACK); |
28a35d8a | 423 | } |
88a5f9ea GS |
424 | ret = sigma_write_sr(devc, buf, wrptr - buf); |
425 | if (ret != SR_OK) | |
426 | return ret; | |
28a35d8a | 427 | |
88a5f9ea | 428 | return sigma_read_sr(devc, data, numchunks * ROW_LENGTH_BYTES); |
28a35d8a HE |
429 | } |
430 | ||
4ae1f451 | 431 | /* Upload trigger look-up tables to Sigma. */ |
9b4d261f GS |
432 | SR_PRIV int sigma_write_trigger_lut(struct dev_context *devc, |
433 | struct triggerlut *lut) | |
ee492173 | 434 | { |
0f017b7d | 435 | int lut_addr; |
ee492173 | 436 | uint16_t bit; |
72ea3b84 | 437 | uint8_t m3d, m2d, m1d, m0d; |
16791da9 GS |
438 | uint8_t buf[6], *wrptr; |
439 | uint16_t selreg; | |
88a5f9ea | 440 | int ret; |
ee492173 | 441 | |
72ea3b84 GS |
442 | /* |
443 | * Translate the LUT part of the trigger configuration from the | |
444 | * application's perspective to the hardware register's bitfield | |
445 | * layout. Send the LUT to the device. This configures the logic | |
446 | * which combines pin levels or edges. | |
447 | */ | |
0f017b7d GS |
448 | for (lut_addr = 0; lut_addr < 16; lut_addr++) { |
449 | bit = 1 << lut_addr; | |
ee492173 | 450 | |
72ea3b84 GS |
451 | /* - M4 M3S M3Q */ |
452 | m3d = 0; | |
453 | if (lut->m4 & bit) | |
454 | m3d |= 1 << 2; | |
455 | if (lut->m3s & bit) | |
456 | m3d |= 1 << 1; | |
16791da9 | 457 | if (lut->m3q & bit) |
72ea3b84 | 458 | m3d |= 1 << 0; |
ee492173 | 459 | |
72ea3b84 GS |
460 | /* M2D3 M2D2 M2D1 M2D0 */ |
461 | m2d = 0; | |
ee492173 | 462 | if (lut->m2d[3] & bit) |
72ea3b84 GS |
463 | m2d |= 1 << 3; |
464 | if (lut->m2d[2] & bit) | |
465 | m2d |= 1 << 2; | |
466 | if (lut->m2d[1] & bit) | |
467 | m2d |= 1 << 1; | |
468 | if (lut->m2d[0] & bit) | |
469 | m2d |= 1 << 0; | |
ee492173 | 470 | |
72ea3b84 GS |
471 | /* M1D3 M1D2 M1D1 M1D0 */ |
472 | m1d = 0; | |
473 | if (lut->m1d[3] & bit) | |
474 | m1d |= 1 << 3; | |
475 | if (lut->m1d[2] & bit) | |
476 | m1d |= 1 << 2; | |
477 | if (lut->m1d[1] & bit) | |
478 | m1d |= 1 << 1; | |
479 | if (lut->m1d[0] & bit) | |
480 | m1d |= 1 << 0; | |
ee492173 | 481 | |
72ea3b84 GS |
482 | /* M0D3 M0D2 M0D1 M0D0 */ |
483 | m0d = 0; | |
ee492173 | 484 | if (lut->m0d[3] & bit) |
72ea3b84 GS |
485 | m0d |= 1 << 3; |
486 | if (lut->m0d[2] & bit) | |
487 | m0d |= 1 << 2; | |
488 | if (lut->m0d[1] & bit) | |
489 | m0d |= 1 << 1; | |
490 | if (lut->m0d[0] & bit) | |
491 | m0d |= 1 << 0; | |
ee492173 | 492 | |
a53b8e4d | 493 | /* |
72ea3b84 GS |
494 | * Send 16bits with M3D/M2D and M1D/M0D bit masks to the |
495 | * TriggerSelect register, then strobe the LUT write by | |
496 | * passing A3-A0 to TriggerSelect2. Hold RESET during LUT | |
497 | * programming. | |
a53b8e4d GS |
498 | */ |
499 | wrptr = buf; | |
72ea3b84 GS |
500 | write_u8_inc(&wrptr, (m3d << 4) | (m2d << 0)); |
501 | write_u8_inc(&wrptr, (m1d << 4) | (m0d << 0)); | |
419f1095 GS |
502 | ret = sigma_write_register(devc, WRITE_TRIGGER_SELECT, |
503 | buf, wrptr - buf); | |
88a5f9ea GS |
504 | if (ret != SR_OK) |
505 | return ret; | |
419f1095 GS |
506 | ret = sigma_set_register(devc, WRITE_TRIGGER_SELECT2, |
507 | TRGSEL2_RESET | TRGSEL2_LUT_WRITE | | |
0f017b7d | 508 | (lut_addr & TRGSEL2_LUT_ADDR_MASK)); |
88a5f9ea GS |
509 | if (ret != SR_OK) |
510 | return ret; | |
ee492173 HE |
511 | } |
512 | ||
72ea3b84 GS |
513 | /* |
514 | * Send the parameters. This covers counters and durations. | |
515 | */ | |
a53b8e4d | 516 | wrptr = buf; |
16791da9 GS |
517 | selreg = 0; |
518 | selreg |= (lut->params.selinc & TRGSEL_SELINC_MASK) << TRGSEL_SELINC_SHIFT; | |
519 | selreg |= (lut->params.selres & TRGSEL_SELRES_MASK) << TRGSEL_SELRES_SHIFT; | |
520 | selreg |= (lut->params.sela & TRGSEL_SELA_MASK) << TRGSEL_SELA_SHIFT; | |
521 | selreg |= (lut->params.selb & TRGSEL_SELB_MASK) << TRGSEL_SELB_SHIFT; | |
522 | selreg |= (lut->params.selc & TRGSEL_SELC_MASK) << TRGSEL_SELC_SHIFT; | |
523 | selreg |= (lut->params.selpresc & TRGSEL_SELPRESC_MASK) << TRGSEL_SELPRESC_SHIFT; | |
524 | write_u16be_inc(&wrptr, selreg); | |
0f017b7d GS |
525 | write_u16be_inc(&wrptr, lut->params.cmpb); |
526 | write_u16be_inc(&wrptr, lut->params.cmpa); | |
88a5f9ea GS |
527 | ret = sigma_write_register(devc, WRITE_TRIGGER_SELECT, buf, wrptr - buf); |
528 | if (ret != SR_OK) | |
529 | return ret; | |
ee492173 | 530 | |
e46b8fb1 | 531 | return SR_OK; |
ee492173 HE |
532 | } |
533 | ||
d5fa188a | 534 | /* |
dc0906e2 GS |
535 | * See Xilinx UG332 for Spartan-3 FPGA configuration. The SIGMA device |
536 | * uses FTDI bitbang mode for netlist download in slave serial mode. | |
537 | * (LATER: The OMEGA device's cable contains a more capable FTDI chip | |
538 | * and uses MPSSE mode for bitbang. -- Can we also use FT232H in FT245 | |
539 | * compatible bitbang mode? For maximum code re-use and reduced libftdi | |
540 | * dependency? See section 3.5.5 of FT232H: D0 clk, D1 data (out), D2 | |
541 | * data (in), D3 select, D4-7 GPIOL. See section 3.5.7 for MCU FIFO.) | |
542 | * | |
543 | * 750kbps rate (four times the speed of sigmalogan) works well for | |
544 | * netlist download. All pins except INIT_B are output pins during | |
545 | * configuration download. | |
546 | * | |
547 | * Some pins are inverted as a byproduct of level shifting circuitry. | |
548 | * That's why high CCLK level (from the cable's point of view) is idle | |
549 | * from the FPGA's perspective. | |
550 | * | |
551 | * The vendor's literature discusses a "suicide sequence" which ends | |
552 | * regular FPGA execution and should be sent before entering bitbang | |
553 | * mode and sending configuration data. Set D7 and toggle D2, D3, D4 | |
554 | * a few times. | |
555 | */ | |
556 | #define BB_PIN_CCLK (1 << 0) /* D0, CCLK */ | |
557 | #define BB_PIN_PROG (1 << 1) /* D1, PROG */ | |
558 | #define BB_PIN_D2 (1 << 2) /* D2, (part of) SUICIDE */ | |
559 | #define BB_PIN_D3 (1 << 3) /* D3, (part of) SUICIDE */ | |
560 | #define BB_PIN_D4 (1 << 4) /* D4, (part of) SUICIDE (unused?) */ | |
561 | #define BB_PIN_INIT (1 << 5) /* D5, INIT, input pin */ | |
562 | #define BB_PIN_DIN (1 << 6) /* D6, DIN */ | |
563 | #define BB_PIN_D7 (1 << 7) /* D7, (part of) SUICIDE */ | |
564 | ||
565 | #define BB_BITRATE (750 * 1000) | |
566 | #define BB_PINMASK (0xff & ~BB_PIN_INIT) | |
567 | ||
568 | /* | |
569 | * Initiate slave serial mode for configuration download. Which is done | |
570 | * by pulsing PROG_B and sensing INIT_B. Make sure CCLK is idle before | |
c749d1ca GS |
571 | * initiating the configuration download. |
572 | * | |
573 | * Run a "suicide sequence" first to terminate the regular FPGA operation | |
574 | * before reconfiguration. The FTDI cable is single channel, and shares | |
575 | * pins which are used for data communication in FIFO mode with pins that | |
576 | * are used for FPGA configuration in bitbang mode. Hardware defaults for | |
577 | * unconfigured hardware, and runtime conditions after FPGA configuration | |
578 | * need to cooperate such that re-configuration of the FPGA can start. | |
d5fa188a | 579 | */ |
c749d1ca | 580 | static int sigma_fpga_init_bitbang_once(struct dev_context *devc) |
d5fa188a | 581 | { |
a53b8e4d | 582 | const uint8_t suicide[] = { |
dc0906e2 GS |
583 | BB_PIN_D7 | BB_PIN_D2, |
584 | BB_PIN_D7 | BB_PIN_D2, | |
585 | BB_PIN_D7 | BB_PIN_D3, | |
586 | BB_PIN_D7 | BB_PIN_D2, | |
587 | BB_PIN_D7 | BB_PIN_D3, | |
588 | BB_PIN_D7 | BB_PIN_D2, | |
589 | BB_PIN_D7 | BB_PIN_D3, | |
590 | BB_PIN_D7 | BB_PIN_D2, | |
d5fa188a | 591 | }; |
a53b8e4d | 592 | const uint8_t init_array[] = { |
dc0906e2 GS |
593 | BB_PIN_CCLK, |
594 | BB_PIN_CCLK | BB_PIN_PROG, | |
595 | BB_PIN_CCLK | BB_PIN_PROG, | |
596 | BB_PIN_CCLK, | |
597 | BB_PIN_CCLK, | |
598 | BB_PIN_CCLK, | |
599 | BB_PIN_CCLK, | |
600 | BB_PIN_CCLK, | |
601 | BB_PIN_CCLK, | |
602 | BB_PIN_CCLK, | |
d5fa188a | 603 | }; |
dc0906e2 | 604 | int retries, ret; |
d5fa188a MV |
605 | uint8_t data; |
606 | ||
607 | /* Section 2. part 1), do the FPGA suicide. */ | |
88a5f9ea GS |
608 | ret = SR_OK; |
609 | ret |= sigma_write_sr(devc, suicide, sizeof(suicide)); | |
610 | ret |= sigma_write_sr(devc, suicide, sizeof(suicide)); | |
611 | ret |= sigma_write_sr(devc, suicide, sizeof(suicide)); | |
612 | ret |= sigma_write_sr(devc, suicide, sizeof(suicide)); | |
613 | if (ret != SR_OK) | |
614 | return SR_ERR_IO; | |
c749d1ca | 615 | g_usleep(10 * 1000); |
d5fa188a | 616 | |
dc0906e2 | 617 | /* Section 2. part 2), pulse PROG. */ |
88a5f9ea GS |
618 | ret = sigma_write_sr(devc, init_array, sizeof(init_array)); |
619 | if (ret != SR_OK) | |
620 | return ret; | |
c749d1ca | 621 | g_usleep(10 * 1000); |
7fe1f91f | 622 | ftdi_usb_purge_buffers(&devc->ftdi.ctx); |
d5fa188a | 623 | |
88a5f9ea GS |
624 | /* |
625 | * Wait until the FPGA asserts INIT_B. Check in a maximum number | |
626 | * of bursts with a given delay between them. Read as many pin | |
627 | * capture results as the combination of FTDI chip and FTID lib | |
628 | * may provide. Cope with absence of pin capture data in a cycle. | |
629 | * This approach shall result in fast reponse in case of success, | |
630 | * low cost of execution during wait, reliable error handling in | |
631 | * the transport layer, and robust response to failure or absence | |
632 | * of result data (hardware inactivity after stimulus). | |
633 | */ | |
dc0906e2 GS |
634 | retries = 10; |
635 | while (retries--) { | |
88a5f9ea GS |
636 | do { |
637 | ret = sigma_read_raw(devc, &data, sizeof(data)); | |
638 | if (ret < 0) | |
639 | return SR_ERR_IO; | |
640 | if (ret == sizeof(data) && (data & BB_PIN_INIT)) | |
641 | return SR_OK; | |
642 | } while (ret == sizeof(data)); | |
643 | if (retries) | |
644 | g_usleep(10 * 1000); | |
d5fa188a MV |
645 | } |
646 | ||
647 | return SR_ERR_TIMEOUT; | |
648 | } | |
649 | ||
c749d1ca GS |
650 | /* |
651 | * This is belt and braces. Re-run the bitbang initiation sequence a few | |
652 | * times should first attempts fail. Failure is rare but can happen (was | |
653 | * observed during driver development). | |
654 | */ | |
655 | static int sigma_fpga_init_bitbang(struct dev_context *devc) | |
656 | { | |
657 | size_t retries; | |
658 | int ret; | |
659 | ||
660 | retries = 10; | |
661 | while (retries--) { | |
662 | ret = sigma_fpga_init_bitbang_once(devc); | |
663 | if (ret == SR_OK) | |
664 | return ret; | |
665 | if (ret != SR_ERR_TIMEOUT) | |
666 | return ret; | |
667 | } | |
668 | return ret; | |
669 | } | |
670 | ||
64fe661b MV |
671 | /* |
672 | * Configure the FPGA for logic-analyzer mode. | |
673 | */ | |
674 | static int sigma_fpga_init_la(struct dev_context *devc) | |
675 | { | |
0f017b7d | 676 | uint8_t buf[20], *wrptr; |
a53b8e4d | 677 | uint8_t data_55, data_aa, mode; |
64fe661b | 678 | uint8_t result[3]; |
a53b8e4d | 679 | const uint8_t *rdptr; |
64fe661b MV |
680 | int ret; |
681 | ||
a53b8e4d GS |
682 | wrptr = buf; |
683 | ||
684 | /* Read ID register. */ | |
0f017b7d GS |
685 | write_u8_inc(&wrptr, REG_ADDR_LOW | LO4(READ_ID)); |
686 | write_u8_inc(&wrptr, REG_ADDR_HIGH | HI4(READ_ID)); | |
a53b8e4d GS |
687 | write_u8_inc(&wrptr, REG_READ_ADDR); |
688 | ||
689 | /* Write 0x55 to scratch register, read back. */ | |
690 | data_55 = 0x55; | |
0f017b7d GS |
691 | write_u8_inc(&wrptr, REG_ADDR_LOW | LO4(WRITE_TEST)); |
692 | write_u8_inc(&wrptr, REG_ADDR_HIGH | HI4(WRITE_TEST)); | |
693 | write_u8_inc(&wrptr, REG_DATA_LOW | LO4(data_55)); | |
694 | write_u8_inc(&wrptr, REG_DATA_HIGH_WRITE | HI4(data_55)); | |
a53b8e4d GS |
695 | write_u8_inc(&wrptr, REG_READ_ADDR); |
696 | ||
697 | /* Write 0xaa to scratch register, read back. */ | |
698 | data_aa = 0xaa; | |
0f017b7d GS |
699 | write_u8_inc(&wrptr, REG_ADDR_LOW | LO4(WRITE_TEST)); |
700 | write_u8_inc(&wrptr, REG_ADDR_HIGH | HI4(WRITE_TEST)); | |
701 | write_u8_inc(&wrptr, REG_DATA_LOW | LO4(data_aa)); | |
702 | write_u8_inc(&wrptr, REG_DATA_HIGH_WRITE | HI4(data_aa)); | |
a53b8e4d GS |
703 | write_u8_inc(&wrptr, REG_READ_ADDR); |
704 | ||
705 | /* Initiate SDRAM initialization in mode register. */ | |
706 | mode = WMR_SDRAMINIT; | |
0f017b7d GS |
707 | write_u8_inc(&wrptr, REG_ADDR_LOW | LO4(WRITE_MODE)); |
708 | write_u8_inc(&wrptr, REG_ADDR_HIGH | HI4(WRITE_MODE)); | |
709 | write_u8_inc(&wrptr, REG_DATA_LOW | LO4(mode)); | |
710 | write_u8_inc(&wrptr, REG_DATA_HIGH_WRITE | HI4(mode)); | |
a53b8e4d | 711 | |
dc0906e2 GS |
712 | /* |
713 | * Send the command sequence which contains 3 READ requests. | |
714 | * Expect to see the corresponding 3 response bytes. | |
715 | */ | |
88a5f9ea GS |
716 | ret = sigma_write_sr(devc, buf, wrptr - buf); |
717 | if (ret != SR_OK) { | |
718 | sr_err("Could not request LA start response."); | |
719 | return ret; | |
720 | } | |
721 | ret = sigma_read_sr(devc, result, ARRAY_SIZE(result)); | |
722 | if (ret != SR_OK) { | |
723 | sr_err("Could not receive LA start response."); | |
a53b8e4d GS |
724 | return SR_ERR_IO; |
725 | } | |
726 | rdptr = result; | |
727 | if (read_u8_inc(&rdptr) != 0xa6) { | |
728 | sr_err("Unexpected ID response."); | |
729 | return SR_ERR_DATA; | |
730 | } | |
731 | if (read_u8_inc(&rdptr) != data_55) { | |
732 | sr_err("Unexpected scratch read-back (55)."); | |
733 | return SR_ERR_DATA; | |
734 | } | |
735 | if (read_u8_inc(&rdptr) != data_aa) { | |
736 | sr_err("Unexpected scratch read-back (aa)."); | |
737 | return SR_ERR_DATA; | |
738 | } | |
64fe661b MV |
739 | |
740 | return SR_OK; | |
64fe661b MV |
741 | } |
742 | ||
a80226bb MV |
743 | /* |
744 | * Read the firmware from a file and transform it into a series of bitbang | |
745 | * pulses used to program the FPGA. Note that the *bb_cmd must be free()'d | |
746 | * by the caller of this function. | |
747 | */ | |
8e2d6c9d | 748 | static int sigma_fw_2_bitbang(struct sr_context *ctx, const char *name, |
9b4d261f | 749 | uint8_t **bb_cmd, gsize *bb_cmd_size) |
a80226bb | 750 | { |
dc0906e2 GS |
751 | uint8_t *firmware; |
752 | size_t file_size; | |
753 | uint8_t *p; | |
754 | size_t l; | |
a80226bb | 755 | uint32_t imm; |
dc0906e2 GS |
756 | size_t bb_size; |
757 | uint8_t *bb_stream, *bbs, byte, mask, v; | |
a80226bb | 758 | |
387825dc | 759 | /* Retrieve the on-disk firmware file content. */ |
742368a2 GS |
760 | firmware = sr_resource_load(ctx, SR_RESOURCE_FIRMWARE, name, |
761 | &file_size, SIGMA_FIRMWARE_SIZE_LIMIT); | |
8e2d6c9d | 762 | if (!firmware) |
dc0906e2 | 763 | return SR_ERR_IO; |
a80226bb | 764 | |
387825dc | 765 | /* Unscramble the file content (XOR with "random" sequence). */ |
dc0906e2 GS |
766 | p = firmware; |
767 | l = file_size; | |
a80226bb | 768 | imm = 0x3f6df2ab; |
dc0906e2 | 769 | while (l--) { |
a80226bb | 770 | imm = (imm + 0xa853753) % 177 + (imm * 0x8034052); |
dc0906e2 | 771 | *p++ ^= imm & 0xff; |
a80226bb MV |
772 | } |
773 | ||
774 | /* | |
387825dc GS |
775 | * Generate a sequence of bitbang samples. With two samples per |
776 | * FPGA configuration bit, providing the level for the DIN signal | |
777 | * as well as two edges for CCLK. See Xilinx UG332 for details | |
778 | * ("slave serial" mode). | |
779 | * | |
780 | * Note that CCLK is inverted in hardware. That's why the | |
781 | * respective bit is first set and then cleared in the bitbang | |
782 | * sample sets. So that the DIN level will be stable when the | |
783 | * data gets sampled at the rising CCLK edge, and the signals' | |
784 | * setup time constraint will be met. | |
785 | * | |
786 | * The caller will put the FPGA into download mode, will send | |
787 | * the bitbang samples, and release the allocated memory. | |
a80226bb | 788 | */ |
a80226bb | 789 | bb_size = file_size * 8 * 2; |
dc0906e2 | 790 | bb_stream = g_try_malloc(bb_size); |
a80226bb | 791 | if (!bb_stream) { |
88a5f9ea | 792 | sr_err("Memory allocation failed during firmware upload."); |
dc0906e2 GS |
793 | g_free(firmware); |
794 | return SR_ERR_MALLOC; | |
a80226bb | 795 | } |
a80226bb | 796 | bbs = bb_stream; |
dc0906e2 GS |
797 | p = firmware; |
798 | l = file_size; | |
799 | while (l--) { | |
800 | byte = *p++; | |
801 | mask = 0x80; | |
802 | while (mask) { | |
803 | v = (byte & mask) ? BB_PIN_DIN : 0; | |
804 | mask >>= 1; | |
805 | *bbs++ = v | BB_PIN_CCLK; | |
a80226bb MV |
806 | *bbs++ = v; |
807 | } | |
808 | } | |
dc0906e2 | 809 | g_free(firmware); |
a80226bb MV |
810 | |
811 | /* The transformation completed successfully, return the result. */ | |
812 | *bb_cmd = bb_stream; | |
813 | *bb_cmd_size = bb_size; | |
814 | ||
dc0906e2 | 815 | return SR_OK; |
a80226bb MV |
816 | } |
817 | ||
9b4d261f GS |
818 | static int upload_firmware(struct sr_context *ctx, struct dev_context *devc, |
819 | enum sigma_firmware_idx firmware_idx) | |
28a35d8a HE |
820 | { |
821 | int ret; | |
a53b8e4d GS |
822 | uint8_t *buf; |
823 | uint8_t pins; | |
28a35d8a | 824 | size_t buf_size; |
a9016883 | 825 | const char *firmware; |
a9016883 | 826 | |
80e717b3 GS |
827 | /* Check for valid firmware file selection. */ |
828 | if (firmware_idx >= ARRAY_SIZE(firmware_files)) | |
829 | return SR_ERR_ARG; | |
4b25cbff | 830 | firmware = firmware_files[firmware_idx]; |
80e717b3 GS |
831 | if (!firmware || !*firmware) |
832 | return SR_ERR_ARG; | |
833 | ||
834 | /* Avoid downloading the same firmware multiple times. */ | |
835 | if (devc->firmware_idx == firmware_idx) { | |
a9016883 GS |
836 | sr_info("Not uploading firmware file '%s' again.", firmware); |
837 | return SR_OK; | |
838 | } | |
28a35d8a | 839 | |
1bb9dc82 GS |
840 | devc->state.state = SIGMA_CONFIG; |
841 | ||
dc0906e2 | 842 | /* Set the cable to bitbang mode. */ |
7fe1f91f | 843 | ret = ftdi_set_bitmode(&devc->ftdi.ctx, BB_PINMASK, BITMODE_BITBANG); |
8bbf7627 | 844 | if (ret < 0) { |
88a5f9ea | 845 | sr_err("Could not setup cable mode for upload: %s", |
7fe1f91f | 846 | ftdi_get_error_string(&devc->ftdi.ctx)); |
7bcf2168 | 847 | return SR_ERR; |
28a35d8a | 848 | } |
7fe1f91f | 849 | ret = ftdi_set_baudrate(&devc->ftdi.ctx, BB_BITRATE); |
8bbf7627 | 850 | if (ret < 0) { |
88a5f9ea | 851 | sr_err("Could not setup bitrate for upload: %s", |
7fe1f91f | 852 | ftdi_get_error_string(&devc->ftdi.ctx)); |
7bcf2168 | 853 | return SR_ERR; |
28a35d8a HE |
854 | } |
855 | ||
dc0906e2 | 856 | /* Initiate FPGA configuration mode. */ |
d5fa188a | 857 | ret = sigma_fpga_init_bitbang(devc); |
88a5f9ea GS |
858 | if (ret) { |
859 | sr_err("Could not initiate firmware upload to hardware"); | |
d5fa188a | 860 | return ret; |
88a5f9ea | 861 | } |
28a35d8a | 862 | |
dc0906e2 | 863 | /* Prepare wire format of the firmware image. */ |
8e2d6c9d | 864 | ret = sigma_fw_2_bitbang(ctx, firmware, &buf, &buf_size); |
8bbf7627 | 865 | if (ret != SR_OK) { |
88a5f9ea | 866 | sr_err("Could not prepare file %s for upload.", firmware); |
b53738ba | 867 | return ret; |
28a35d8a HE |
868 | } |
869 | ||
dc0906e2 | 870 | /* Write the FPGA netlist to the cable. */ |
499b17e9 | 871 | sr_info("Uploading firmware file '%s'.", firmware); |
88a5f9ea | 872 | ret = sigma_write_sr(devc, buf, buf_size); |
28a35d8a | 873 | g_free(buf); |
88a5f9ea GS |
874 | if (ret != SR_OK) { |
875 | sr_err("Could not upload firmware file '%s'.", firmware); | |
876 | return ret; | |
877 | } | |
28a35d8a | 878 | |
dc0906e2 | 879 | /* Leave bitbang mode and discard pending input data. */ |
7fe1f91f | 880 | ret = ftdi_set_bitmode(&devc->ftdi.ctx, 0, BITMODE_RESET); |
8bbf7627 | 881 | if (ret < 0) { |
88a5f9ea | 882 | sr_err("Could not setup cable mode after upload: %s", |
7fe1f91f | 883 | ftdi_get_error_string(&devc->ftdi.ctx)); |
e46b8fb1 | 884 | return SR_ERR; |
28a35d8a | 885 | } |
7fe1f91f | 886 | ftdi_usb_purge_buffers(&devc->ftdi.ctx); |
88a5f9ea | 887 | while (sigma_read_raw(devc, &pins, sizeof(pins)) > 0) |
28a35d8a HE |
888 | ; |
889 | ||
64fe661b MV |
890 | /* Initialize the FPGA for logic-analyzer mode. */ |
891 | ret = sigma_fpga_init_la(devc); | |
88a5f9ea GS |
892 | if (ret != SR_OK) { |
893 | sr_err("Hardware response after firmware upload failed."); | |
64fe661b | 894 | return ret; |
88a5f9ea | 895 | } |
28a35d8a | 896 | |
dc0906e2 | 897 | /* Keep track of successful firmware download completion. */ |
1bb9dc82 | 898 | devc->state.state = SIGMA_IDLE; |
80e717b3 | 899 | devc->firmware_idx = firmware_idx; |
47f4f073 | 900 | sr_info("Firmware uploaded."); |
e3fff420 | 901 | |
e46b8fb1 | 902 | return SR_OK; |
f6564c8d HE |
903 | } |
904 | ||
9a0a606a | 905 | /* |
5e78a564 GS |
906 | * The driver supports user specified time or sample count limits. The |
907 | * device's hardware supports neither, and hardware compression prevents | |
908 | * reliable detection of "fill levels" (currently reached sample counts) | |
909 | * from register values during acquisition. That's why the driver needs | |
910 | * to apply some heuristics: | |
9a0a606a | 911 | * |
5e78a564 GS |
912 | * - The (optional) sample count limit and the (normalized) samplerate |
913 | * get mapped to an estimated duration for these samples' acquisition. | |
914 | * - The (optional) time limit gets checked as well. The lesser of the | |
915 | * two limits will terminate the data acquisition phase. The exact | |
916 | * sample count limit gets enforced in session feed submission paths. | |
917 | * - Some slack needs to be given to account for hardware pipelines as | |
918 | * well as late storage of last chunks after compression thresholds | |
919 | * are tripped. The resulting data set will span at least the caller | |
920 | * specified period of time, which shall be perfectly acceptable. | |
921 | * | |
922 | * With RLE compression active, up to 64K sample periods can pass before | |
923 | * a cluster accumulates. Which translates to 327ms at 200kHz. Add two | |
924 | * times that period for good measure, one is not enough to flush the | |
925 | * hardware pipeline (observation from an earlier experiment). | |
9a0a606a | 926 | */ |
5e78a564 | 927 | SR_PRIV int sigma_set_acquire_timeout(struct dev_context *devc) |
9a0a606a | 928 | { |
5e78a564 GS |
929 | int ret; |
930 | GVariant *data; | |
931 | uint64_t user_count, user_msecs; | |
9a0a606a | 932 | uint64_t worst_cluster_time_ms; |
5e78a564 | 933 | uint64_t count_msecs, acquire_msecs; |
9a0a606a | 934 | |
5e78a564 GS |
935 | sr_sw_limits_init(&devc->acq_limits); |
936 | ||
937 | /* Get sample count limit, convert to msecs. */ | |
938 | ret = sr_sw_limits_config_get(&devc->cfg_limits, | |
939 | SR_CONF_LIMIT_SAMPLES, &data); | |
940 | if (ret != SR_OK) | |
941 | return ret; | |
942 | user_count = g_variant_get_uint64(data); | |
943 | g_variant_unref(data); | |
944 | count_msecs = 0; | |
945 | if (user_count) | |
946 | count_msecs = 1000 * user_count / devc->samplerate + 1; | |
947 | ||
948 | /* Get time limit, which is in msecs. */ | |
949 | ret = sr_sw_limits_config_get(&devc->cfg_limits, | |
950 | SR_CONF_LIMIT_MSEC, &data); | |
951 | if (ret != SR_OK) | |
952 | return ret; | |
953 | user_msecs = g_variant_get_uint64(data); | |
954 | g_variant_unref(data); | |
955 | ||
956 | /* Get the lesser of them, with both being optional. */ | |
957 | acquire_msecs = ~0ull; | |
958 | if (user_count && count_msecs < acquire_msecs) | |
959 | acquire_msecs = count_msecs; | |
960 | if (user_msecs && user_msecs < acquire_msecs) | |
961 | acquire_msecs = user_msecs; | |
962 | if (acquire_msecs == ~0ull) | |
963 | return SR_OK; | |
964 | ||
965 | /* Add some slack, and use that timeout for acquisition. */ | |
966 | worst_cluster_time_ms = 1000 * 65536 / devc->samplerate; | |
967 | acquire_msecs += 2 * worst_cluster_time_ms; | |
968 | data = g_variant_new_uint64(acquire_msecs); | |
969 | ret = sr_sw_limits_config_set(&devc->acq_limits, | |
970 | SR_CONF_LIMIT_MSEC, data); | |
971 | g_variant_unref(data); | |
972 | if (ret != SR_OK) | |
973 | return ret; | |
974 | ||
975 | sr_sw_limits_acquisition_start(&devc->acq_limits); | |
976 | return SR_OK; | |
9a0a606a GS |
977 | } |
978 | ||
5e78a564 GS |
979 | /* |
980 | * Check whether a caller specified samplerate matches the device's | |
981 | * hardware constraints (can be used for acquisition). Optionally yield | |
982 | * a value that approximates the original spec. | |
983 | * | |
984 | * This routine assumes that input specs are in the 200kHz to 200MHz | |
985 | * range of supported rates, and callers typically want to normalize a | |
986 | * given value to the hardware capabilities. Values in the 50MHz range | |
987 | * get rounded up by default, to avoid a more expensive check for the | |
988 | * closest match, while higher sampling rate is always desirable during | |
989 | * measurement. Input specs which exactly match hardware capabilities | |
990 | * remain unaffected. Because 100/200MHz rates also limit the number of | |
991 | * available channels, they are not suggested by this routine, instead | |
992 | * callers need to pick them consciously. | |
993 | */ | |
994 | SR_PRIV int sigma_normalize_samplerate(uint64_t want_rate, uint64_t *have_rate) | |
995 | { | |
996 | uint64_t div, rate; | |
997 | ||
998 | /* Accept exact matches for 100/200MHz. */ | |
999 | if (want_rate == SR_MHZ(200) || want_rate == SR_MHZ(100)) { | |
1000 | if (have_rate) | |
1001 | *have_rate = want_rate; | |
1002 | return SR_OK; | |
1003 | } | |
1004 | ||
1005 | /* Accept 200kHz to 50MHz range, and map to near value. */ | |
1006 | if (want_rate >= SR_KHZ(200) && want_rate <= SR_MHZ(50)) { | |
1007 | div = SR_MHZ(50) / want_rate; | |
1008 | rate = SR_MHZ(50) / div; | |
1009 | if (have_rate) | |
1010 | *have_rate = rate; | |
1011 | return SR_OK; | |
1012 | } | |
1013 | ||
1014 | return SR_ERR_ARG; | |
1015 | } | |
1016 | ||
abcd4771 GS |
1017 | SR_PRIV uint64_t sigma_get_samplerate(const struct sr_dev_inst *sdi) |
1018 | { | |
1019 | /* TODO Retrieve value from hardware. */ | |
1020 | (void)sdi; | |
1021 | return samplerates[0]; | |
1022 | } | |
1023 | ||
5e78a564 | 1024 | SR_PRIV int sigma_set_samplerate(const struct sr_dev_inst *sdi) |
f6564c8d | 1025 | { |
2c9c0df8 | 1026 | struct dev_context *devc; |
8e2d6c9d | 1027 | struct drv_context *drvc; |
5e78a564 | 1028 | uint64_t samplerate; |
2c9c0df8 | 1029 | int ret; |
ac9534f4 | 1030 | int num_channels; |
f6564c8d | 1031 | |
2c9c0df8 | 1032 | devc = sdi->priv; |
8e2d6c9d | 1033 | drvc = sdi->driver->context; |
f4abaa9f | 1034 | |
5e78a564 GS |
1035 | /* Accept any caller specified rate which the hardware supports. */ |
1036 | ret = sigma_normalize_samplerate(devc->samplerate, &samplerate); | |
1037 | if (ret != SR_OK) | |
1038 | return ret; | |
f6564c8d | 1039 | |
2f7e529c GS |
1040 | /* |
1041 | * Depending on the samplerates of 200/100/50- MHz, specific | |
1042 | * firmware is required and higher rates might limit the set | |
1043 | * of available channels. | |
1044 | */ | |
ac9534f4 | 1045 | num_channels = devc->num_channels; |
59df0c77 | 1046 | if (samplerate <= SR_MHZ(50)) { |
80e717b3 | 1047 | ret = upload_firmware(drvc->sr_ctx, devc, SIGMA_FW_50MHZ); |
ac9534f4 | 1048 | num_channels = 16; |
6b2d3385 | 1049 | } else if (samplerate == SR_MHZ(100)) { |
80e717b3 | 1050 | ret = upload_firmware(drvc->sr_ctx, devc, SIGMA_FW_100MHZ); |
ac9534f4 | 1051 | num_channels = 8; |
6b2d3385 | 1052 | } else if (samplerate == SR_MHZ(200)) { |
80e717b3 | 1053 | ret = upload_firmware(drvc->sr_ctx, devc, SIGMA_FW_200MHZ); |
ac9534f4 | 1054 | num_channels = 4; |
f78898e9 | 1055 | } |
f6564c8d | 1056 | |
2f7e529c | 1057 | /* |
5e78a564 GS |
1058 | * The samplerate affects the number of available logic channels |
1059 | * as well as a sample memory layout detail (the number of samples | |
1060 | * which the device will communicate within an "event"). | |
2f7e529c | 1061 | */ |
6b2d3385 | 1062 | if (ret == SR_OK) { |
ac9534f4 | 1063 | devc->num_channels = num_channels; |
6b2d3385 | 1064 | devc->samples_per_event = 16 / devc->num_channels; |
6b2d3385 | 1065 | } |
f6564c8d | 1066 | |
e8397563 | 1067 | return ret; |
28a35d8a HE |
1068 | } |
1069 | ||
98b43eb3 GS |
1070 | /* |
1071 | * Arrange for a session feed submit buffer. A queue where a number of | |
1072 | * samples gets accumulated to reduce the number of send calls. Which | |
1073 | * also enforces an optional sample count limit for data acquisition. | |
1074 | * | |
1075 | * The buffer holds up to CHUNK_SIZE bytes. The unit size is fixed (the | |
1076 | * driver provides a fixed channel layout regardless of samplerate). | |
1077 | */ | |
1078 | ||
1079 | #define CHUNK_SIZE (4 * 1024 * 1024) | |
1080 | ||
1081 | struct submit_buffer { | |
1082 | size_t unit_size; | |
1083 | size_t max_samples, curr_samples; | |
1084 | uint8_t *sample_data; | |
1085 | uint8_t *write_pointer; | |
1086 | struct sr_dev_inst *sdi; | |
1087 | struct sr_datafeed_packet packet; | |
1088 | struct sr_datafeed_logic logic; | |
98b43eb3 GS |
1089 | }; |
1090 | ||
1091 | static int alloc_submit_buffer(struct sr_dev_inst *sdi) | |
1092 | { | |
1093 | struct dev_context *devc; | |
1094 | struct submit_buffer *buffer; | |
1095 | size_t size; | |
1096 | ||
1097 | devc = sdi->priv; | |
1098 | ||
1099 | buffer = g_malloc0(sizeof(*buffer)); | |
1100 | devc->buffer = buffer; | |
1101 | ||
1102 | buffer->unit_size = sizeof(uint16_t); | |
1103 | size = CHUNK_SIZE; | |
1104 | size /= buffer->unit_size; | |
1105 | buffer->max_samples = size; | |
1106 | size *= buffer->unit_size; | |
1107 | buffer->sample_data = g_try_malloc0(size); | |
1108 | if (!buffer->sample_data) | |
1109 | return SR_ERR_MALLOC; | |
1110 | buffer->write_pointer = buffer->sample_data; | |
5e78a564 | 1111 | sr_sw_limits_init(&devc->feed_limits); |
98b43eb3 GS |
1112 | |
1113 | buffer->sdi = sdi; | |
1114 | memset(&buffer->logic, 0, sizeof(buffer->logic)); | |
1115 | buffer->logic.unitsize = buffer->unit_size; | |
1116 | buffer->logic.data = buffer->sample_data; | |
1117 | memset(&buffer->packet, 0, sizeof(buffer->packet)); | |
1118 | buffer->packet.type = SR_DF_LOGIC; | |
1119 | buffer->packet.payload = &buffer->logic; | |
1120 | ||
1121 | return SR_OK; | |
1122 | } | |
1123 | ||
5e78a564 | 1124 | static int setup_submit_limit(struct dev_context *devc) |
98b43eb3 | 1125 | { |
5e78a564 | 1126 | struct sr_sw_limits *limits; |
98b43eb3 GS |
1127 | int ret; |
1128 | GVariant *data; | |
1129 | uint64_t total; | |
1130 | ||
5e78a564 | 1131 | limits = &devc->feed_limits; |
98b43eb3 | 1132 | |
5e78a564 GS |
1133 | ret = sr_sw_limits_config_get(&devc->cfg_limits, |
1134 | SR_CONF_LIMIT_SAMPLES, &data); | |
1135 | if (ret != SR_OK) | |
1136 | return ret; | |
1137 | total = g_variant_get_uint64(data); | |
1138 | g_variant_unref(data); | |
1139 | ||
1140 | sr_sw_limits_init(limits); | |
98b43eb3 GS |
1141 | if (total) { |
1142 | data = g_variant_new_uint64(total); | |
5e78a564 | 1143 | ret = sr_sw_limits_config_set(limits, |
98b43eb3 GS |
1144 | SR_CONF_LIMIT_SAMPLES, data); |
1145 | g_variant_unref(data); | |
1146 | if (ret != SR_OK) | |
1147 | return ret; | |
1148 | } | |
1149 | ||
5e78a564 | 1150 | sr_sw_limits_acquisition_start(limits); |
98b43eb3 GS |
1151 | |
1152 | return SR_OK; | |
1153 | } | |
1154 | ||
1155 | static void free_submit_buffer(struct dev_context *devc) | |
1156 | { | |
1157 | struct submit_buffer *buffer; | |
1158 | ||
1159 | if (!devc) | |
1160 | return; | |
1161 | ||
1162 | buffer = devc->buffer; | |
1163 | if (!buffer) | |
1164 | return; | |
1165 | devc->buffer = NULL; | |
1166 | ||
1167 | g_free(buffer->sample_data); | |
1168 | g_free(buffer); | |
1169 | } | |
1170 | ||
1171 | static int flush_submit_buffer(struct dev_context *devc) | |
1172 | { | |
1173 | struct submit_buffer *buffer; | |
1174 | int ret; | |
1175 | ||
1176 | buffer = devc->buffer; | |
1177 | ||
1178 | /* Is queued sample data available? */ | |
1179 | if (!buffer->curr_samples) | |
1180 | return SR_OK; | |
1181 | ||
1182 | /* Submit to the session feed. */ | |
1183 | buffer->logic.length = buffer->curr_samples * buffer->unit_size; | |
1184 | ret = sr_session_send(buffer->sdi, &buffer->packet); | |
1185 | if (ret != SR_OK) | |
1186 | return ret; | |
1187 | ||
1188 | /* Rewind queue position. */ | |
1189 | buffer->curr_samples = 0; | |
1190 | buffer->write_pointer = buffer->sample_data; | |
1191 | ||
1192 | return SR_OK; | |
1193 | } | |
1194 | ||
1195 | static int addto_submit_buffer(struct dev_context *devc, | |
1196 | uint16_t sample, size_t count) | |
1197 | { | |
1198 | struct submit_buffer *buffer; | |
5e78a564 | 1199 | struct sr_sw_limits *limits; |
98b43eb3 GS |
1200 | int ret; |
1201 | ||
1202 | buffer = devc->buffer; | |
5e78a564 GS |
1203 | limits = &devc->feed_limits; |
1204 | if (sr_sw_limits_check(limits)) | |
98b43eb3 GS |
1205 | count = 0; |
1206 | ||
1207 | /* | |
1208 | * Individually accumulate and check each sample, such that | |
1209 | * accumulation between flushes won't exceed local storage, and | |
1210 | * enforcement of user specified limits is exact. | |
1211 | */ | |
1212 | while (count--) { | |
a53b8e4d | 1213 | write_u16le_inc(&buffer->write_pointer, sample); |
98b43eb3 GS |
1214 | buffer->curr_samples++; |
1215 | if (buffer->curr_samples == buffer->max_samples) { | |
1216 | ret = flush_submit_buffer(devc); | |
1217 | if (ret != SR_OK) | |
1218 | return ret; | |
1219 | } | |
5e78a564 GS |
1220 | sr_sw_limits_update_samples_read(limits, 1); |
1221 | if (sr_sw_limits_check(limits)) | |
98b43eb3 GS |
1222 | break; |
1223 | } | |
1224 | ||
1225 | return SR_OK; | |
1226 | } | |
1227 | ||
c53d793f HE |
1228 | /* |
1229 | * In 100 and 200 MHz mode, only a single pin rising/falling can be | |
1230 | * set as trigger. In other modes, two rising/falling triggers can be set, | |
ba7dd8bb | 1231 | * in addition to value/mask trigger for any number of channels. |
c53d793f HE |
1232 | * |
1233 | * The Sigma supports complex triggers using boolean expressions, but this | |
1234 | * has not been implemented yet. | |
1235 | */ | |
3ba56876 | 1236 | SR_PRIV int sigma_convert_trigger(const struct sr_dev_inst *sdi) |
57bbf56b | 1237 | { |
39c64c6a BV |
1238 | struct dev_context *devc; |
1239 | struct sr_trigger *trigger; | |
1240 | struct sr_trigger_stage *stage; | |
1241 | struct sr_trigger_match *match; | |
1242 | const GSList *l, *m; | |
1243 | int channelbit, trigger_set; | |
57bbf56b | 1244 | |
39c64c6a | 1245 | devc = sdi->priv; |
5c231fc4 GS |
1246 | memset(&devc->trigger, 0, sizeof(devc->trigger)); |
1247 | trigger = sr_session_trigger_get(sdi->session); | |
1248 | if (!trigger) | |
39c64c6a BV |
1249 | return SR_OK; |
1250 | ||
1251 | trigger_set = 0; | |
1252 | for (l = trigger->stages; l; l = l->next) { | |
1253 | stage = l->data; | |
1254 | for (m = stage->matches; m; m = m->next) { | |
1255 | match = m->data; | |
9b4d261f | 1256 | /* Ignore disabled channels with a trigger. */ |
39c64c6a | 1257 | if (!match->channel->enabled) |
39c64c6a | 1258 | continue; |
a53b8e4d | 1259 | channelbit = 1 << match->channel->index; |
5e78a564 | 1260 | if (devc->samplerate >= SR_MHZ(100)) { |
39c64c6a BV |
1261 | /* Fast trigger support. */ |
1262 | if (trigger_set) { | |
88a5f9ea | 1263 | sr_err("100/200MHz modes limited to single trigger pin."); |
39c64c6a BV |
1264 | return SR_ERR; |
1265 | } | |
a53b8e4d | 1266 | if (match->match == SR_TRIGGER_FALLING) { |
39c64c6a | 1267 | devc->trigger.fallingmask |= channelbit; |
a53b8e4d | 1268 | } else if (match->match == SR_TRIGGER_RISING) { |
39c64c6a | 1269 | devc->trigger.risingmask |= channelbit; |
a53b8e4d | 1270 | } else { |
88a5f9ea | 1271 | sr_err("100/200MHz modes limited to edge trigger."); |
39c64c6a BV |
1272 | return SR_ERR; |
1273 | } | |
eec5275e | 1274 | |
0a1f7b09 | 1275 | trigger_set++; |
39c64c6a BV |
1276 | } else { |
1277 | /* Simple trigger support (event). */ | |
1278 | if (match->match == SR_TRIGGER_ONE) { | |
1279 | devc->trigger.simplevalue |= channelbit; | |
1280 | devc->trigger.simplemask |= channelbit; | |
8ebad343 | 1281 | } else if (match->match == SR_TRIGGER_ZERO) { |
39c64c6a BV |
1282 | devc->trigger.simplevalue &= ~channelbit; |
1283 | devc->trigger.simplemask |= channelbit; | |
8ebad343 | 1284 | } else if (match->match == SR_TRIGGER_FALLING) { |
39c64c6a | 1285 | devc->trigger.fallingmask |= channelbit; |
0a1f7b09 | 1286 | trigger_set++; |
8ebad343 | 1287 | } else if (match->match == SR_TRIGGER_RISING) { |
39c64c6a | 1288 | devc->trigger.risingmask |= channelbit; |
0a1f7b09 | 1289 | trigger_set++; |
39c64c6a BV |
1290 | } |
1291 | ||
1292 | /* | |
1293 | * Actually, Sigma supports 2 rising/falling triggers, | |
1294 | * but they are ORed and the current trigger syntax | |
1295 | * does not permit ORed triggers. | |
1296 | */ | |
1297 | if (trigger_set > 1) { | |
88a5f9ea | 1298 | sr_err("Limited to 1 edge trigger."); |
39c64c6a BV |
1299 | return SR_ERR; |
1300 | } | |
ee492173 | 1301 | } |
ee492173 | 1302 | } |
57bbf56b HE |
1303 | } |
1304 | ||
e46b8fb1 | 1305 | return SR_OK; |
57bbf56b HE |
1306 | } |
1307 | ||
36b1c8e6 | 1308 | /* Software trigger to determine exact trigger position. */ |
5fc01191 | 1309 | static int get_trigger_offset(uint8_t *samples, uint16_t last_sample, |
9b4d261f | 1310 | struct sigma_trigger *t) |
36b1c8e6 | 1311 | { |
a53b8e4d | 1312 | const uint8_t *rdptr; |
36b1c8e6 | 1313 | int i; |
a53b8e4d | 1314 | uint16_t sample; |
36b1c8e6 | 1315 | |
a53b8e4d GS |
1316 | rdptr = samples; |
1317 | sample = 0; | |
0a1f7b09 | 1318 | for (i = 0; i < 8; i++) { |
36b1c8e6 | 1319 | if (i > 0) |
5fc01191 | 1320 | last_sample = sample; |
a53b8e4d | 1321 | sample = read_u16le_inc(&rdptr); |
36b1c8e6 HE |
1322 | |
1323 | /* Simple triggers. */ | |
5fc01191 | 1324 | if ((sample & t->simplemask) != t->simplevalue) |
36b1c8e6 HE |
1325 | continue; |
1326 | ||
1327 | /* Rising edge. */ | |
5fc01191 MV |
1328 | if (((last_sample & t->risingmask) != 0) || |
1329 | ((sample & t->risingmask) != t->risingmask)) | |
36b1c8e6 HE |
1330 | continue; |
1331 | ||
1332 | /* Falling edge. */ | |
bdfc7a89 | 1333 | if ((last_sample & t->fallingmask) != t->fallingmask || |
5fc01191 | 1334 | (sample & t->fallingmask) != 0) |
36b1c8e6 HE |
1335 | continue; |
1336 | ||
1337 | break; | |
1338 | } | |
1339 | ||
1340 | /* If we did not match, return original trigger pos. */ | |
1341 | return i & 0x7; | |
1342 | } | |
1343 | ||
98b43eb3 GS |
1344 | static gboolean sample_matches_trigger(struct dev_context *devc, uint16_t sample) |
1345 | { | |
1346 | /* TODO | |
1347 | * Check whether the combination of this very sample and the | |
1348 | * previous state match the configured trigger condition. This | |
1349 | * improves the resolution of the trigger marker's position. | |
1350 | * The hardware provided position is coarse, and may point to | |
1351 | * a position before the actual match. | |
1352 | * | |
1353 | * See the previous get_trigger_offset() implementation. This | |
1354 | * code needs to get re-used here. | |
1355 | */ | |
1356 | (void)devc; | |
1357 | (void)sample; | |
1358 | (void)get_trigger_offset; | |
1359 | ||
1360 | return FALSE; | |
1361 | } | |
1362 | ||
1363 | static int check_and_submit_sample(struct dev_context *devc, | |
1364 | uint16_t sample, size_t count, gboolean check_trigger) | |
1365 | { | |
1366 | gboolean triggered; | |
1367 | int ret; | |
1368 | ||
1369 | triggered = check_trigger && sample_matches_trigger(devc, sample); | |
1370 | if (triggered) { | |
1371 | ret = flush_submit_buffer(devc); | |
1372 | if (ret != SR_OK) | |
1373 | return ret; | |
1374 | ret = std_session_send_df_trigger(devc->buffer->sdi); | |
1375 | if (ret != SR_OK) | |
1376 | return ret; | |
1377 | } | |
1378 | ||
1379 | ret = addto_submit_buffer(devc, sample, count); | |
1380 | if (ret != SR_OK) | |
1381 | return ret; | |
1382 | ||
1383 | return SR_OK; | |
1384 | } | |
1385 | ||
3513d965 MV |
1386 | /* |
1387 | * Return the timestamp of "DRAM cluster". | |
1388 | */ | |
1389 | static uint16_t sigma_dram_cluster_ts(struct sigma_dram_cluster *cluster) | |
1390 | { | |
2a62a9c4 | 1391 | return read_u16le((const uint8_t *)&cluster->timestamp); |
3513d965 MV |
1392 | } |
1393 | ||
0498f743 GS |
1394 | /* |
1395 | * Return one 16bit data entity of a DRAM cluster at the specified index. | |
1396 | */ | |
1397 | static uint16_t sigma_dram_cluster_data(struct sigma_dram_cluster *cl, int idx) | |
1398 | { | |
2a62a9c4 | 1399 | return read_u16le((const uint8_t *)&cl->samples[idx]); |
0498f743 GS |
1400 | } |
1401 | ||
85c032e4 GS |
1402 | /* |
1403 | * Deinterlace sample data that was retrieved at 100MHz samplerate. | |
1404 | * One 16bit item contains two samples of 8bits each. The bits of | |
1405 | * multiple samples are interleaved. | |
1406 | */ | |
1407 | static uint16_t sigma_deinterlace_100mhz_data(uint16_t indata, int idx) | |
1408 | { | |
1409 | uint16_t outdata; | |
1410 | ||
1411 | indata >>= idx; | |
1412 | outdata = 0; | |
1413 | outdata |= (indata >> (0 * 2 - 0)) & (1 << 0); | |
1414 | outdata |= (indata >> (1 * 2 - 1)) & (1 << 1); | |
1415 | outdata |= (indata >> (2 * 2 - 2)) & (1 << 2); | |
1416 | outdata |= (indata >> (3 * 2 - 3)) & (1 << 3); | |
1417 | outdata |= (indata >> (4 * 2 - 4)) & (1 << 4); | |
1418 | outdata |= (indata >> (5 * 2 - 5)) & (1 << 5); | |
1419 | outdata |= (indata >> (6 * 2 - 6)) & (1 << 6); | |
1420 | outdata |= (indata >> (7 * 2 - 7)) & (1 << 7); | |
1421 | return outdata; | |
1422 | } | |
1423 | ||
1424 | /* | |
1425 | * Deinterlace sample data that was retrieved at 200MHz samplerate. | |
1426 | * One 16bit item contains four samples of 4bits each. The bits of | |
1427 | * multiple samples are interleaved. | |
1428 | */ | |
1429 | static uint16_t sigma_deinterlace_200mhz_data(uint16_t indata, int idx) | |
1430 | { | |
1431 | uint16_t outdata; | |
1432 | ||
1433 | indata >>= idx; | |
1434 | outdata = 0; | |
1435 | outdata |= (indata >> (0 * 4 - 0)) & (1 << 0); | |
1436 | outdata |= (indata >> (1 * 4 - 1)) & (1 << 1); | |
1437 | outdata |= (indata >> (2 * 4 - 2)) & (1 << 2); | |
1438 | outdata |= (indata >> (3 * 4 - 3)) & (1 << 3); | |
1439 | return outdata; | |
1440 | } | |
1441 | ||
98b43eb3 GS |
1442 | static void sigma_decode_dram_cluster(struct dev_context *devc, |
1443 | struct sigma_dram_cluster *dram_cluster, | |
1444 | size_t events_in_cluster, gboolean triggered) | |
23239b5c | 1445 | { |
98b43eb3 | 1446 | struct sigma_state *ss; |
85c032e4 | 1447 | uint16_t tsdiff, ts, sample, item16; |
23239b5c | 1448 | unsigned int i; |
23239b5c | 1449 | |
98b43eb3 GS |
1450 | if (!devc->use_triggers || !ASIX_SIGMA_WITH_TRIGGER) |
1451 | triggered = FALSE; | |
23239b5c MV |
1452 | |
1453 | /* | |
468f17f2 GS |
1454 | * If this cluster is not adjacent to the previously received |
1455 | * cluster, then send the appropriate number of samples with the | |
1456 | * previous values to the sigrok session. This "decodes RLE". | |
2c33b092 | 1457 | * |
98b43eb3 GS |
1458 | * These samples cannot match the trigger since they just repeat |
1459 | * the previously submitted data pattern. (This assumption holds | |
1460 | * for simple level and edge triggers. It would not for timed or | |
1461 | * counted conditions, which currently are not supported.) | |
23239b5c | 1462 | */ |
98b43eb3 GS |
1463 | ss = &devc->state; |
1464 | ts = sigma_dram_cluster_ts(dram_cluster); | |
1465 | tsdiff = ts - ss->lastts; | |
1466 | if (tsdiff > 0) { | |
1467 | size_t count; | |
9b4d261f | 1468 | sample = ss->lastsample; |
98b43eb3 | 1469 | count = tsdiff * devc->samples_per_event; |
9b4d261f | 1470 | (void)check_and_submit_sample(devc, sample, count, FALSE); |
23239b5c | 1471 | } |
98b43eb3 | 1472 | ss->lastts = ts + EVENTS_PER_CLUSTER; |
23239b5c MV |
1473 | |
1474 | /* | |
98b43eb3 GS |
1475 | * Grab sample data from the current cluster and prepare their |
1476 | * submission to the session feed. Handle samplerate dependent | |
1477 | * memory layout of sample data. Accumulation of data chunks | |
1478 | * before submission is transparent to this code path, specific | |
1479 | * buffer depth is neither assumed nor required here. | |
23239b5c | 1480 | */ |
0498f743 | 1481 | sample = 0; |
23239b5c | 1482 | for (i = 0; i < events_in_cluster; i++) { |
85c032e4 | 1483 | item16 = sigma_dram_cluster_data(dram_cluster, i); |
5e78a564 | 1484 | if (devc->samplerate == SR_MHZ(200)) { |
85c032e4 | 1485 | sample = sigma_deinterlace_200mhz_data(item16, 0); |
98b43eb3 | 1486 | check_and_submit_sample(devc, sample, 1, triggered); |
85c032e4 | 1487 | sample = sigma_deinterlace_200mhz_data(item16, 1); |
98b43eb3 | 1488 | check_and_submit_sample(devc, sample, 1, triggered); |
85c032e4 | 1489 | sample = sigma_deinterlace_200mhz_data(item16, 2); |
98b43eb3 | 1490 | check_and_submit_sample(devc, sample, 1, triggered); |
85c032e4 | 1491 | sample = sigma_deinterlace_200mhz_data(item16, 3); |
98b43eb3 | 1492 | check_and_submit_sample(devc, sample, 1, triggered); |
5e78a564 | 1493 | } else if (devc->samplerate == SR_MHZ(100)) { |
85c032e4 | 1494 | sample = sigma_deinterlace_100mhz_data(item16, 0); |
98b43eb3 | 1495 | check_and_submit_sample(devc, sample, 1, triggered); |
85c032e4 | 1496 | sample = sigma_deinterlace_100mhz_data(item16, 1); |
98b43eb3 | 1497 | check_and_submit_sample(devc, sample, 1, triggered); |
85c032e4 GS |
1498 | } else { |
1499 | sample = item16; | |
98b43eb3 | 1500 | check_and_submit_sample(devc, sample, 1, triggered); |
23239b5c | 1501 | } |
23239b5c | 1502 | } |
0498f743 | 1503 | ss->lastsample = sample; |
23239b5c MV |
1504 | } |
1505 | ||
28a35d8a | 1506 | /* |
fefa1800 UH |
1507 | * Decode chunk of 1024 bytes, 64 clusters, 7 events per cluster. |
1508 | * Each event is 20ns apart, and can contain multiple samples. | |
f78898e9 HE |
1509 | * |
1510 | * For 200 MHz, events contain 4 samples for each channel, spread 5 ns apart. | |
1511 | * For 100 MHz, events contain 2 samples for each channel, spread 10 ns apart. | |
1512 | * For 50 MHz and below, events contain one sample for each channel, | |
1513 | * spread 20 ns apart. | |
28a35d8a | 1514 | */ |
98b43eb3 GS |
1515 | static int decode_chunk_ts(struct dev_context *devc, |
1516 | struct sigma_dram_line *dram_line, | |
1517 | size_t events_in_line, size_t trigger_event) | |
28a35d8a | 1518 | { |
3628074d | 1519 | struct sigma_dram_cluster *dram_cluster; |
f06fb3e9 | 1520 | unsigned int clusters_in_line; |
5fc01191 | 1521 | unsigned int events_in_cluster; |
23239b5c | 1522 | unsigned int i; |
98b43eb3 | 1523 | uint32_t trigger_cluster; |
f06fb3e9 | 1524 | |
f06fb3e9 GS |
1525 | clusters_in_line = events_in_line; |
1526 | clusters_in_line += EVENTS_PER_CLUSTER - 1; | |
1527 | clusters_in_line /= EVENTS_PER_CLUSTER; | |
1528 | trigger_cluster = ~0; | |
ee492173 | 1529 | |
4ae1f451 | 1530 | /* Check if trigger is in this chunk. */ |
2c33b092 | 1531 | if (trigger_event < EVENTS_PER_ROW) { |
5e78a564 | 1532 | if (devc->samplerate <= SR_MHZ(50)) { |
1e23158b MV |
1533 | trigger_event -= MIN(EVENTS_PER_CLUSTER - 1, |
1534 | trigger_event); | |
1535 | } | |
57bbf56b | 1536 | |
f3f19d11 | 1537 | /* Find in which cluster the trigger occurred. */ |
1e23158b | 1538 | trigger_cluster = trigger_event / EVENTS_PER_CLUSTER; |
ee492173 | 1539 | } |
28a35d8a | 1540 | |
5fc01191 MV |
1541 | /* For each full DRAM cluster. */ |
1542 | for (i = 0; i < clusters_in_line; i++) { | |
3628074d | 1543 | dram_cluster = &dram_line->cluster[i]; |
5fc01191 | 1544 | |
5fc01191 | 1545 | /* The last cluster might not be full. */ |
23239b5c MV |
1546 | if ((i == clusters_in_line - 1) && |
1547 | (events_in_line % EVENTS_PER_CLUSTER)) { | |
5fc01191 | 1548 | events_in_cluster = events_in_line % EVENTS_PER_CLUSTER; |
23239b5c | 1549 | } else { |
5fc01191 | 1550 | events_in_cluster = EVENTS_PER_CLUSTER; |
abda62ce | 1551 | } |
ee492173 | 1552 | |
98b43eb3 GS |
1553 | sigma_decode_dram_cluster(devc, dram_cluster, |
1554 | events_in_cluster, i == trigger_cluster); | |
28a35d8a HE |
1555 | } |
1556 | ||
e46b8fb1 | 1557 | return SR_OK; |
28a35d8a HE |
1558 | } |
1559 | ||
6057d9fa | 1560 | static int download_capture(struct sr_dev_inst *sdi) |
28a35d8a | 1561 | { |
e15e5873 | 1562 | const uint32_t chunks_per_read = 32; |
f06fb3e9 GS |
1563 | |
1564 | struct dev_context *devc; | |
fd830beb | 1565 | struct sigma_dram_line *dram_line; |
462fe786 | 1566 | uint32_t stoppos, triggerpos; |
6057d9fa | 1567 | uint8_t modestatus; |
c6648b66 MV |
1568 | uint32_t i; |
1569 | uint32_t dl_lines_total, dl_lines_curr, dl_lines_done; | |
74d453ab | 1570 | uint32_t dl_first_line, dl_line; |
5c231fc4 | 1571 | uint32_t dl_events_in_line, trigger_event; |
f06fb3e9 | 1572 | uint32_t trg_line, trg_event; |
98b43eb3 | 1573 | int ret; |
f06fb3e9 GS |
1574 | |
1575 | devc = sdi->priv; | |
c6648b66 | 1576 | |
6868626b | 1577 | sr_info("Downloading sample data."); |
dde0175d | 1578 | devc->state.state = SIGMA_DOWNLOAD; |
6868626b | 1579 | |
22f64ed8 GS |
1580 | /* |
1581 | * Ask the hardware to stop data acquisition. Reception of the | |
1582 | * FORCESTOP request makes the hardware "disable RLE" (store | |
1583 | * clusters to DRAM regardless of whether pin state changes) and | |
1584 | * raise the POSTTRIGGERED flag. | |
1585 | */ | |
88a5f9ea GS |
1586 | modestatus = WMR_FORCESTOP | WMR_SDRAMWRITEEN; |
1587 | ret = sigma_set_register(devc, WRITE_MODE, modestatus); | |
1588 | if (ret != SR_OK) | |
1589 | return ret; | |
22f64ed8 | 1590 | do { |
0f017b7d | 1591 | ret = sigma_get_register(devc, READ_MODE, &modestatus); |
88a5f9ea GS |
1592 | if (ret != SR_OK) { |
1593 | sr_err("Could not poll for post-trigger state."); | |
f73b00b6 DT |
1594 | return FALSE; |
1595 | } | |
22f64ed8 | 1596 | } while (!(modestatus & RMR_POSTTRIGGERED)); |
6057d9fa MV |
1597 | |
1598 | /* Set SDRAM Read Enable. */ | |
88a5f9ea GS |
1599 | ret = sigma_set_register(devc, WRITE_MODE, WMR_SDRAMREADEN); |
1600 | if (ret != SR_OK) | |
1601 | return ret; | |
6057d9fa | 1602 | |
88a5f9ea GS |
1603 | /* Get the current position. Check if trigger has fired. */ |
1604 | ret = sigma_read_pos(devc, &stoppos, &triggerpos, &modestatus); | |
1605 | if (ret != SR_OK) { | |
1606 | sr_err("Could not query capture positions/state."); | |
f73b00b6 DT |
1607 | return FALSE; |
1608 | } | |
dc400817 GS |
1609 | trg_line = ~0; |
1610 | trg_event = ~0; | |
22f64ed8 | 1611 | if (modestatus & RMR_TRIGGERED) { |
a53b8e4d GS |
1612 | trg_line = triggerpos >> ROW_SHIFT; |
1613 | trg_event = triggerpos & ROW_MASK; | |
1e23158b | 1614 | } |
6057d9fa | 1615 | |
c6648b66 | 1616 | /* |
74d453ab GS |
1617 | * Determine how many "DRAM lines" of 1024 bytes each we need to |
1618 | * retrieve from the Sigma hardware, so that we have a complete | |
1619 | * set of samples. Note that the last line need not contain 64 | |
1620 | * clusters, it might be partially filled only. | |
1621 | * | |
1622 | * When RMR_ROUND is set, the circular buffer in DRAM has wrapped | |
1623 | * around. Since the status of the very next line is uncertain in | |
2c33b092 | 1624 | * that case, we skip it and start reading from the next line. |
c6648b66 | 1625 | */ |
2c33b092 GS |
1626 | dl_first_line = 0; |
1627 | dl_lines_total = (stoppos >> ROW_SHIFT) + 1; | |
74d453ab GS |
1628 | if (modestatus & RMR_ROUND) { |
1629 | dl_first_line = dl_lines_total + 1; | |
2c33b092 | 1630 | dl_lines_total = ROW_COUNT - 2; |
74d453ab | 1631 | } |
44081095 DT |
1632 | dram_line = g_try_malloc0(chunks_per_read * sizeof(*dram_line)); |
1633 | if (!dram_line) | |
1634 | return FALSE; | |
98b43eb3 GS |
1635 | ret = alloc_submit_buffer(sdi); |
1636 | if (ret != SR_OK) | |
1637 | return FALSE; | |
5e78a564 | 1638 | ret = setup_submit_limit(devc); |
98b43eb3 GS |
1639 | if (ret != SR_OK) |
1640 | return FALSE; | |
c6648b66 | 1641 | dl_lines_done = 0; |
c6648b66 MV |
1642 | while (dl_lines_total > dl_lines_done) { |
1643 | /* We can download only up-to 32 DRAM lines in one go! */ | |
547c4cdc | 1644 | dl_lines_curr = MIN(chunks_per_read, dl_lines_total - dl_lines_done); |
6868626b | 1645 | |
74d453ab | 1646 | dl_line = dl_first_line + dl_lines_done; |
2c33b092 | 1647 | dl_line %= ROW_COUNT; |
88a5f9ea GS |
1648 | ret = sigma_read_dram(devc, dl_line, dl_lines_curr, |
1649 | (uint8_t *)dram_line); | |
1650 | if (ret != SR_OK) | |
1651 | return FALSE; | |
6868626b | 1652 | |
c6648b66 MV |
1653 | /* This is the first DRAM line, so find the initial timestamp. */ |
1654 | if (dl_lines_done == 0) { | |
3513d965 MV |
1655 | devc->state.lastts = |
1656 | sigma_dram_cluster_ts(&dram_line[0].cluster[0]); | |
c6648b66 | 1657 | devc->state.lastsample = 0; |
6868626b BV |
1658 | } |
1659 | ||
c6648b66 | 1660 | for (i = 0; i < dl_lines_curr; i++) { |
a53b8e4d | 1661 | /* The last "DRAM line" need not span its full length. */ |
5c231fc4 | 1662 | dl_events_in_line = EVENTS_PER_ROW; |
c6648b66 | 1663 | if (dl_lines_done + i == dl_lines_total - 1) |
a53b8e4d | 1664 | dl_events_in_line = stoppos & ROW_MASK; |
c6648b66 | 1665 | |
e69ad48e | 1666 | /* Test if the trigger happened on this line. */ |
5c231fc4 | 1667 | trigger_event = ~0; |
c6648b66 | 1668 | if (dl_lines_done + i == trg_line) |
1e23158b | 1669 | trigger_event = trg_event; |
e69ad48e | 1670 | |
98b43eb3 GS |
1671 | decode_chunk_ts(devc, dram_line + i, |
1672 | dl_events_in_line, trigger_event); | |
c6648b66 | 1673 | } |
6868626b | 1674 | |
c6648b66 | 1675 | dl_lines_done += dl_lines_curr; |
6868626b | 1676 | } |
98b43eb3 GS |
1677 | flush_submit_buffer(devc); |
1678 | free_submit_buffer(devc); | |
dde0175d | 1679 | g_free(dram_line); |
6868626b | 1680 | |
bee2b016 | 1681 | std_session_send_df_end(sdi); |
6057d9fa | 1682 | |
dde0175d | 1683 | devc->state.state = SIGMA_IDLE; |
d2f7c417 | 1684 | sr_dev_acquisition_stop(sdi); |
6057d9fa MV |
1685 | |
1686 | return TRUE; | |
6868626b BV |
1687 | } |
1688 | ||
d4051930 | 1689 | /* |
74d453ab GS |
1690 | * Periodically check the Sigma status when in CAPTURE mode. This routine |
1691 | * checks whether the configured sample count or sample time have passed, | |
1692 | * and will stop acquisition and download the acquired samples. | |
d4051930 MV |
1693 | */ |
1694 | static int sigma_capture_mode(struct sr_dev_inst *sdi) | |
6868626b | 1695 | { |
f06fb3e9 | 1696 | struct dev_context *devc; |
28a35d8a | 1697 | |
f06fb3e9 | 1698 | devc = sdi->priv; |
5e78a564 | 1699 | if (sr_sw_limits_check(&devc->acq_limits)) |
6057d9fa | 1700 | return download_capture(sdi); |
00c86508 | 1701 | |
d4051930 MV |
1702 | return TRUE; |
1703 | } | |
28a35d8a | 1704 | |
3ba56876 | 1705 | SR_PRIV int sigma_receive_data(int fd, int revents, void *cb_data) |
d4051930 MV |
1706 | { |
1707 | struct sr_dev_inst *sdi; | |
1708 | struct dev_context *devc; | |
88c51afe | 1709 | |
d4051930 MV |
1710 | (void)fd; |
1711 | (void)revents; | |
88c51afe | 1712 | |
d4051930 MV |
1713 | sdi = cb_data; |
1714 | devc = sdi->priv; | |
1715 | ||
1716 | if (devc->state.state == SIGMA_IDLE) | |
1717 | return TRUE; | |
1718 | ||
dde0175d GS |
1719 | /* |
1720 | * When the application has requested to stop the acquisition, | |
1721 | * then immediately start downloading sample data. Otherwise | |
1722 | * keep checking configured limits which will terminate the | |
1723 | * acquisition and initiate download. | |
1724 | */ | |
1725 | if (devc->state.state == SIGMA_STOPPING) | |
1726 | return download_capture(sdi); | |
d4051930 MV |
1727 | if (devc->state.state == SIGMA_CAPTURE) |
1728 | return sigma_capture_mode(sdi); | |
28a35d8a | 1729 | |
28a35d8a HE |
1730 | return TRUE; |
1731 | } | |
1732 | ||
c53d793f | 1733 | /* Build a LUT entry used by the trigger functions. */ |
7dd766e0 GS |
1734 | static void build_lut_entry(uint16_t *lut_entry, |
1735 | uint16_t spec_value, uint16_t spec_mask) | |
ee492173 | 1736 | { |
7dd766e0 GS |
1737 | size_t quad, bitidx, ch; |
1738 | uint16_t quadmask, bitmask; | |
1739 | gboolean spec_value_low, bit_idx_low; | |
ee492173 | 1740 | |
7dd766e0 GS |
1741 | /* |
1742 | * For each quad-channel-group, for each bit in the LUT (each | |
1743 | * bit pattern of the channel signals, aka LUT address), for | |
1744 | * each channel in the quad, setup the bit in the LUT entry. | |
1745 | * | |
1746 | * Start from all-ones in the LUT (true, always matches), then | |
1747 | * "pessimize the truthness" for specified conditions. | |
1748 | */ | |
1749 | for (quad = 0; quad < 4; quad++) { | |
1750 | lut_entry[quad] = ~0; | |
1751 | for (bitidx = 0; bitidx < 16; bitidx++) { | |
1752 | for (ch = 0; ch < 4; ch++) { | |
1753 | quadmask = 1 << ch; | |
1754 | bitmask = quadmask << (quad * 4); | |
1755 | if (!(spec_mask & bitmask)) | |
1756 | continue; | |
1757 | /* | |
1758 | * This bit is part of the spec. The | |
1759 | * condition which gets checked here | |
1760 | * (got checked in all implementations | |
1761 | * so far) is uncertain. A bit position | |
1762 | * in the current index' number(!) is | |
1763 | * checked? | |
1764 | */ | |
1765 | spec_value_low = !(spec_value & bitmask); | |
1766 | bit_idx_low = !(bitidx & quadmask); | |
1767 | if (spec_value_low == bit_idx_low) | |
1768 | continue; | |
1769 | lut_entry[quad] &= ~(1 << bitidx); | |
ee492173 | 1770 | } |
a53b8e4d | 1771 | } |
ee492173 | 1772 | } |
c53d793f | 1773 | } |
ee492173 | 1774 | |
c53d793f HE |
1775 | /* Add a logical function to LUT mask. */ |
1776 | static void add_trigger_function(enum triggerop oper, enum triggerfunc func, | |
9b4d261f | 1777 | int index, int neg, uint16_t *mask) |
c53d793f HE |
1778 | { |
1779 | int i, j; | |
1780 | int x[2][2], tmp, a, b, aset, bset, rset; | |
1781 | ||
5c231fc4 | 1782 | memset(x, 0, sizeof(x)); |
c53d793f HE |
1783 | |
1784 | /* Trigger detect condition. */ | |
1785 | switch (oper) { | |
1786 | case OP_LEVEL: | |
1787 | x[0][1] = 1; | |
1788 | x[1][1] = 1; | |
1789 | break; | |
1790 | case OP_NOT: | |
1791 | x[0][0] = 1; | |
1792 | x[1][0] = 1; | |
1793 | break; | |
1794 | case OP_RISE: | |
1795 | x[0][1] = 1; | |
1796 | break; | |
1797 | case OP_FALL: | |
1798 | x[1][0] = 1; | |
1799 | break; | |
1800 | case OP_RISEFALL: | |
1801 | x[0][1] = 1; | |
1802 | x[1][0] = 1; | |
1803 | break; | |
1804 | case OP_NOTRISE: | |
1805 | x[1][1] = 1; | |
1806 | x[0][0] = 1; | |
1807 | x[1][0] = 1; | |
1808 | break; | |
1809 | case OP_NOTFALL: | |
1810 | x[1][1] = 1; | |
1811 | x[0][0] = 1; | |
1812 | x[0][1] = 1; | |
1813 | break; | |
1814 | case OP_NOTRISEFALL: | |
1815 | x[1][1] = 1; | |
1816 | x[0][0] = 1; | |
1817 | break; | |
1818 | } | |
1819 | ||
1820 | /* Transpose if neg is set. */ | |
1821 | if (neg) { | |
0a1f7b09 UH |
1822 | for (i = 0; i < 2; i++) { |
1823 | for (j = 0; j < 2; j++) { | |
c53d793f | 1824 | tmp = x[i][j]; |
0a1f7b09 UH |
1825 | x[i][j] = x[1 - i][1 - j]; |
1826 | x[1 - i][1 - j] = tmp; | |
c53d793f | 1827 | } |
ea9cfed7 | 1828 | } |
c53d793f HE |
1829 | } |
1830 | ||
1831 | /* Update mask with function. */ | |
0a1f7b09 | 1832 | for (i = 0; i < 16; i++) { |
c53d793f HE |
1833 | a = (i >> (2 * index + 0)) & 1; |
1834 | b = (i >> (2 * index + 1)) & 1; | |
1835 | ||
1836 | aset = (*mask >> i) & 1; | |
1837 | bset = x[b][a]; | |
1838 | ||
382cb19f | 1839 | rset = 0; |
c53d793f HE |
1840 | if (func == FUNC_AND || func == FUNC_NAND) |
1841 | rset = aset & bset; | |
1842 | else if (func == FUNC_OR || func == FUNC_NOR) | |
1843 | rset = aset | bset; | |
1844 | else if (func == FUNC_XOR || func == FUNC_NXOR) | |
1845 | rset = aset ^ bset; | |
1846 | ||
1847 | if (func == FUNC_NAND || func == FUNC_NOR || func == FUNC_NXOR) | |
1848 | rset = !rset; | |
1849 | ||
1850 | *mask &= ~(1 << i); | |
1851 | ||
1852 | if (rset) | |
1853 | *mask |= 1 << i; | |
1854 | } | |
1855 | } | |
1856 | ||
1857 | /* | |
1858 | * Build trigger LUTs used by 50 MHz and lower sample rates for supporting | |
1859 | * simple pin change and state triggers. Only two transitions (rise/fall) can be | |
1860 | * set at any time, but a full mask and value can be set (0/1). | |
1861 | */ | |
9b4d261f GS |
1862 | SR_PRIV int sigma_build_basic_trigger(struct dev_context *devc, |
1863 | struct triggerlut *lut) | |
c53d793f | 1864 | { |
5c231fc4 | 1865 | uint16_t masks[2]; |
7dd766e0 GS |
1866 | int bitidx, condidx; |
1867 | uint16_t value, mask; | |
c53d793f | 1868 | |
7dd766e0 | 1869 | /* Start assuming simple triggers. */ |
5c231fc4 | 1870 | memset(lut, 0, sizeof(*lut)); |
c53d793f | 1871 | lut->m4 = 0xa000; |
16791da9 | 1872 | lut->m3q = 0xffff; |
c53d793f | 1873 | |
7dd766e0 GS |
1874 | /* Process value/mask triggers. */ |
1875 | value = devc->trigger.simplevalue; | |
1876 | mask = devc->trigger.simplemask; | |
1877 | build_lut_entry(lut->m2d, value, mask); | |
c53d793f | 1878 | |
7dd766e0 GS |
1879 | /* Scan for and process rise/fall triggers. */ |
1880 | memset(&masks, 0, sizeof(masks)); | |
1881 | condidx = 0; | |
1882 | for (bitidx = 0; bitidx < 16; bitidx++) { | |
1883 | mask = 1 << bitidx; | |
1884 | value = devc->trigger.risingmask | devc->trigger.fallingmask; | |
1885 | if (!(value & mask)) | |
1886 | continue; | |
1887 | if (condidx == 0) | |
1888 | build_lut_entry(lut->m0d, mask, mask); | |
1889 | if (condidx == 1) | |
1890 | build_lut_entry(lut->m1d, mask, mask); | |
1891 | masks[condidx++] = mask; | |
1892 | if (condidx == ARRAY_SIZE(masks)) | |
1893 | break; | |
c53d793f HE |
1894 | } |
1895 | ||
7dd766e0 | 1896 | /* Add glue logic for rise/fall triggers. */ |
c53d793f | 1897 | if (masks[0] || masks[1]) { |
16791da9 | 1898 | lut->m3q = 0; |
0e1357e8 | 1899 | if (masks[0] & devc->trigger.risingmask) |
16791da9 | 1900 | add_trigger_function(OP_RISE, FUNC_OR, 0, 0, &lut->m3q); |
0e1357e8 | 1901 | if (masks[0] & devc->trigger.fallingmask) |
16791da9 | 1902 | add_trigger_function(OP_FALL, FUNC_OR, 0, 0, &lut->m3q); |
0e1357e8 | 1903 | if (masks[1] & devc->trigger.risingmask) |
16791da9 | 1904 | add_trigger_function(OP_RISE, FUNC_OR, 1, 0, &lut->m3q); |
0e1357e8 | 1905 | if (masks[1] & devc->trigger.fallingmask) |
16791da9 | 1906 | add_trigger_function(OP_FALL, FUNC_OR, 1, 0, &lut->m3q); |
c53d793f | 1907 | } |
ee492173 | 1908 | |
c53d793f | 1909 | /* Triggertype: event. */ |
16791da9 GS |
1910 | lut->params.selres = TRGSEL_SELCODE_NEVER; |
1911 | lut->params.selinc = TRGSEL_SELCODE_LEVEL; | |
1912 | lut->params.sela = 0; /* Counter >= CMPA && LEVEL */ | |
1913 | lut->params.cmpa = 0; /* Count 0 -> 1 already triggers. */ | |
ee492173 | 1914 | |
e46b8fb1 | 1915 | return SR_OK; |
ee492173 | 1916 | } |