2015-10-06 |
Stefan Brüns | usb_request: USB transaction decoder and PCAP generator |
tree | commitdiff |
2015-10-06 |
Uwe Hermann | usb_packet: Document CRC5 ERROR and CRC16 ERROR packets. |
tree | commitdiff |
2015-10-06 |
Uwe Hermann | usb_{signalling,packet}: Minor cosmetics. |
tree | commitdiff |
2015-10-06 |
Stefan Brüns | usb_signalling: Track USB symbol width to compensate... |
tree | commitdiff |
2015-10-06 |
Stefan Brüns | usb_packet: calculate and check CRC5/CRC16 |
tree | commitdiff |
2015-10-06 |
Roland Hieber | rfm12: fix small typo |
tree | commitdiff |
2015-09-15 |
Daniel Elstner | jitter, pwm: Avoid Unicode string literals |
tree | commitdiff |
2015-09-14 |
Uwe Hermann | can: Improve stuff bit annotation placement. |
tree | commitdiff |
2015-09-14 |
Uwe Hermann | can: Emit bit value annotations. |
tree | commitdiff |
2015-09-03 |
Uwe Hermann | jtag_stm32: Decode IDCODE contents as strings (not... |
tree | commitdiff |
2015-09-03 |
Uwe Hermann | jtag_stm32: Decode more fields, improve IDCODE handling. |
tree | commitdiff |
2015-09-03 |
Uwe Hermann | jtag_stm32: Cleanups, shorter code. |
tree | commitdiff |
2015-09-03 |
Uwe Hermann | jtag_stm32: Update to reflect change in jtag OUT_PYTHON. |
tree | commitdiff |
2015-09-03 |
Uwe Hermann | jtag: Submit bit samplenumbers together with the bits. |
tree | commitdiff |
2015-09-03 |
Uwe Hermann | jtag_stm32: Fix incorrect handling of registers. |
tree | commitdiff |
2015-09-03 |
Uwe Hermann | jtag: Add more annotations, fix a SHIFT-IR/-DR issue. |
tree | commitdiff |
2015-09-03 |
Uwe Hermann | jtag: Fix/enable OUT_PYTHON output. |
tree | commitdiff |
2015-08-21 |
Uwe Hermann | nunchuk: Fix inverted button press logic. |
tree | commitdiff |
2015-08-18 |
Uwe Hermann | mrf24j40: Fix a register address typo. |
tree | commitdiff |
2015-08-17 |
Uwe Hermann | tlc5620: Add options for per-DAC Vref, show voltages. |
tree | commitdiff |
2015-08-17 |
Uwe Hermann | tlc5620: Handle the case of less than 11 bits in a... |
tree | commitdiff |
2015-08-17 |
Uwe Hermann | tlc5620: Properly handle LOAD and LDAC based operations. |
tree | commitdiff |
2015-08-17 |
Uwe Hermann | tlc5620: Only decode the last 11 bits, ignore the rest. |
tree | commitdiff |
2015-08-17 |
Uwe Hermann | tlc5620: Fix incorrect DAC selection decode, add more... |
tree | commitdiff |
2015-08-14 |
Uwe Hermann | usb_packet: Handle invalid packets more gracefully. |
tree | commitdiff |
2015-08-14 |
Uwe Hermann | usb_packet: Fix incorrect DATA*/MDATA handling. |
tree | commitdiff |
2015-08-06 |
Uwe Hermann | Add initial SD card (SD mode) decoder. |
tree | commitdiff |
2015-07-18 |
Bart de Waal | Add protocol decoder for Modbus RTU. |
tree | commitdiff |
2015-07-10 |
Josef Gajdusek | qi: Add Qi charger protocol decoder |
tree | commitdiff |
2015-07-09 |
Aurelien Jacobs | Add an MDIO/SMI decoder. |
tree | commitdiff |
2015-06-30 |
Uwe Hermann | adns5020: Minor tweak to annotation format. |
tree | commitdiff |
2015-06-30 |
Uwe Hermann | mrf24j40: Factor out register lists to lists.py. |
tree | commitdiff |
2015-06-30 |
Karl Palsson | Add a Microchip MRF24J40 802.15.4 2.4GHz RF tranceiver... |
tree | commitdiff |
2015-06-22 |
Uwe Hermann | adns5020: Add manufacturer name to description. |
tree | commitdiff |
2015-06-19 |
Karl Palsson | Add Avago ADNS-5020 optical mouse sensor decoder. |
tree | commitdiff |
2015-06-16 |
Karl Palsson | am23xx: explicitly mention RHTxx devices. |
tree | commitdiff |
2015-04-26 |
Uwe Hermann | timing: Shorten annotations (time units). |
tree | commitdiff |
2015-04-26 |
Baruch Even | Add a decoder that calculates timings between transitions. |
tree | commitdiff |
2015-04-07 |
Uwe Hermann | spiflash: Add lists.py and a 'chips' PD option. |
tree | commitdiff |
2015-04-07 |
Uwe Hermann | Rename the 'mx25lxx05d' PD to 'spiflash'. |
tree | commitdiff |
2015-04-07 |
Uwe Hermann | Fix a bunch of typos. |
tree | commitdiff |
2015-04-03 |
Uwe Hermann | onewire_link: Fix a bug when the samplerate is too... |
tree | commitdiff |
2015-04-03 |
Andreas Sandberg | spi: Don't decode data lines if CS isn't asserted |
tree | commitdiff |
2015-04-02 |
Uwe Hermann | Slightly shorten a few PD descriptions. |
tree | commitdiff |
2015-04-02 |
Petteri Aimonen | Add a decoder for stepper motor direction/speed signals. |
tree | commitdiff |
2015-04-02 |
Petteri Aimonen | Fix a few decoding bugs with arm_etmv3. |
tree | commitdiff |
2015-04-02 |
Matt Porter | pwm: add period annotation |
tree | commitdiff |
2015-03-25 |
Uwe Hermann | mx25lxx05d: Implement FAST READ command. |
tree | commitdiff |
2015-03-02 |
Petteri Aimonen | Fix typo in swd decoder |
tree | commitdiff |
2015-03-02 |
Petteri Aimonen | Add ARM TPIU/ITM/ETMv3 decoders |
tree | commitdiff |
2015-02-24 |
Uwe Hermann | nrf24l01: Change 'xn297_extensions' option to 'chip'. |
tree | commitdiff |
2015-02-24 |
Mike | nrf24l01: Add option to support the XN297's extra registers |
tree | commitdiff |
2015-02-17 |
Petteri Aimonen | Improve uart decoder sample positions at high data... |
tree | commitdiff |
2014-12-28 |
Uwe Hermann | Add 24xx I2C EEPROM protocol decoder. |
tree | commitdiff |
2014-12-28 |
Uwe Hermann | spi: Add binary output facilities for MISO/MOSI. |
tree | commitdiff |
2014-12-16 |
Bert Vermeulen | edid: Add annotation rows. |
tree | commitdiff |
2014-12-16 |
Bert Vermeulen | eded: Add all sections. |
tree | commitdiff |
2014-11-23 |
Uwe Hermann | jitter: Simplify ascii-float binary out. |
tree | commitdiff |
2014-11-23 |
Uwe Hermann | jitter: Rename "jitter" binary out to "ascii-float". |
tree | commitdiff |
2014-11-23 |
Sebastien Bourdelin | jitter: add a binary output to report the raw jitter... |
tree | commitdiff |
2014-11-23 |
Sebastien Bourdelin | jitter: fixes an error when a miss clock/signal is... |
tree | commitdiff |
2014-11-09 |
Uwe Hermann | jitter: Factor out handle_clk() and handle_sig(). |
tree | commitdiff |
2014-11-09 |
Sebastien Bourdelin | Add a timing jitter decoder. |
tree | commitdiff |
2014-11-02 |
Sebastien Bourdelin | pwm: Fix and rework |
tree | commitdiff |
2014-10-19 |
Jens Steinhauser | spi: Use 'None' to signal the missing CS# pin. |
tree | commitdiff |
2014-10-19 |
Jens Steinhauser | nrf24l01: Don't decode incomplete commands. |
tree | commitdiff |
2014-10-19 |
Jens Steinhauser | nrf24l01: Check for CS# pin and only throw exceptions... |
tree | commitdiff |
2014-10-19 |
Jens Steinhauser | spi: Tell stacked decoders about missing CS# signal. |
tree | commitdiff |
2014-10-17 |
Uwe Hermann | Add a PWM decoder. |
tree | commitdiff |
2014-10-16 |
Uwe Hermann | uart: Fix code comment. |
tree | commitdiff |
2014-10-16 |
Uwe Hermann | uart: Emit databyte and bits list at the same time. |
tree | commitdiff |
2014-10-15 |
Uwe Hermann | midi: Fix two incorrect sample numbers. |
tree | commitdiff |
2014-10-13 |
Uwe Hermann | All PDs: More consistent names for ss/es variables. |
tree | commitdiff |
2014-10-13 |
Uwe Hermann | All PDs: Only import the 'Decoder' object. |
tree | commitdiff |
2014-10-12 |
Uwe Hermann | am230x: Factor out handle_byte() to simplify state... |
tree | commitdiff |
2014-10-12 |
Uwe Hermann | swd: Drop unnecessary debug code. |
tree | commitdiff |
2014-10-12 |
Angus Gratton | swd: Add SWD protocol decoder for ARM Serial Wire Debug... |
tree | commitdiff |
2014-10-12 |
Uwe Hermann | am230x: Minor documentation fix. |
tree | commitdiff |
2014-10-12 |
Uwe Hermann | am230x: Use slightly more liberal timing values. |
tree | commitdiff |
2014-10-12 |
Uwe Hermann | am230x: Change option to 'device' to allow for more... |
tree | commitdiff |
2014-10-12 |
Uwe Hermann | am230x: Fix self.reset() method name. |
tree | commitdiff |
2014-10-12 |
Uwe Hermann | am230x: Minor cosmetics. |
tree | commitdiff |
2014-10-12 |
Johannes Römer | Add decoder for AM230x digital humidity and temperature... |
tree | commitdiff |
2014-09-15 |
Uwe Hermann | sdcard_spi/usb_packet: Drop unused variables. |
tree | commitdiff |
2014-09-15 |
David Barksdale | uart: Implement signal inversion |
tree | commitdiff |
2014-09-10 |
Uwe Hermann | Various PDs: Whitespace, cosmetics. |
tree | commitdiff |
2014-09-10 |
Uwe Hermann | rfm12: Cosmetics. |
tree | commitdiff |
2014-09-08 |
Uwe Hermann | rfm12: Frequencies: Fix typo (915MHz), add 315MHz entry. |
tree | commitdiff |
2014-09-08 |
Uwe Hermann | rfm12: Avoid using the Python 'range' keyword as variable. |
tree | commitdiff |
2014-09-08 |
Uwe Hermann | rfm12: Drop debug printing. |
tree | commitdiff |
2014-09-07 |
Sławek Piotrowski | RFM12 decoder |
tree | commitdiff |
2014-09-01 |
Uwe Hermann | PD tests moved into the sigrok-test repo. |
tree | commitdiff |
2014-08-29 |
Uwe Hermann | spdif: Simplify get_pulse_type() a bit. |
tree | commitdiff |
2014-08-29 |
Uwe Hermann | spdif: Use strings for decoder states. |
tree | commitdiff |
2014-08-29 |
Uwe Hermann | spdif: Add another annotation helper. |
tree | commitdiff |
2014-08-29 |
Uwe Hermann | spdif: Refactor and reduce nesting level. |
tree | commitdiff |
2014-08-29 |
Guenther Wenninger | Add initial S/PDIF decoder. |
tree | commitdiff |
2014-08-16 |
Uwe Hermann | ds1307: Warn about (and ignore) non-DS1307 traffic. |
tree | commitdiff |
2014-08-16 |
Uwe Hermann | ds1307: Correctly handle address wrap-around. |
tree | commitdiff |
2014-08-16 |
Uwe Hermann | ds1307: Refactoring and cleanups. |
tree | commitdiff |
next |