2016-09-24 |
Uwe Hermann | midi: Simplify some boolean tests. |
tree | commitdiff |
2016-09-24 |
Uwe Hermann | midi: Use "is" or "is not" with None. |
tree | commitdiff |
2016-09-24 |
Uwe Hermann | usb_request: Use "is" or "is not" with None. |
tree | commitdiff |
2016-09-24 |
Chris | midi: Add support for complex MIDI message formats... |
tree | commitdiff |
2016-09-24 |
Chris | midi: chromatic_notes in list.py was off by 1 octave |
tree | commitdiff |
2016-09-24 |
Uwe Hermann | uart: Fix a bug in the output for stacked PDs. |
tree | commitdiff |
2016-09-04 |
Uwe Hermann | midi: Some annotation consistency changes. |
tree | commitdiff |
2016-09-04 |
Chris | Updates each annotation with multiple strings ranging... |
tree | commitdiff |
2016-08-26 |
Uwe Hermann | usb_power_delivery: Drop problematic exception in us2sa... |
tree | commitdiff |
2016-08-23 |
Uwe Hermann | ssi32: Slightly more descriptive naming. |
tree | commitdiff |
2016-08-23 |
Chris Dreher | midi: Substantially improve decoding of MIDI messages. |
tree | commitdiff |
2016-08-21 |
Uwe Hermann | ssi32: Minor cosmetics, add full license header (for... |
tree | commitdiff |
2016-08-21 |
Oleksij Rempel | Add Bosch SSI32 protocol decoder. |
tree | commitdiff |
2016-07-06 |
cbdev | Add a DMX512 protocol decoder |
tree | commitdiff |
2016-06-28 |
Uwe Hermann | timing: Add frequency and averaging support. |
tree | commitdiff |
2016-06-22 |
Uwe Hermann | spiflash: Add a 'format' option. |
tree | commitdiff |
2016-06-22 |
Angus Gratton | spiflash: Perf tweak: Build handler lookup table once... |
tree | commitdiff |
2016-06-22 |
Angus Gratton | spiflash: Handle "Fast Read Dual I/O" |
tree | commitdiff |
2016-06-22 |
Angus Gratton | spiflash: Handle CS# transitions, allow variable-length... |
tree | commitdiff |
2016-05-26 |
Uwe Hermann | Consistency renames of {ss,es}_ variables. |
tree | commitdiff |
2016-05-25 |
Uwe Hermann | Move common/ directory into decoders/. |
tree | commitdiff |
2016-05-18 |
Benjamin Larsson | Add decoder for em4305 RFID protocol |
tree | commitdiff |
2016-05-15 |
Uwe Hermann | Use consistent __init__() format across all PDs. |
tree | commitdiff |
2016-05-11 |
Uwe Hermann | usb_request: Drop hardcoded samplerate. |
tree | commitdiff |
2016-05-11 |
Uwe Hermann | wiegand: Make bitwidth_ms option values integer (not... |
tree | commitdiff |
2016-05-11 |
Sean Burford | Add wiegand decoder. |
tree | commitdiff |
2016-05-09 |
Uwe Hermann | Consistently use ' instead of " for strings in all... |
tree | commitdiff |
2016-05-09 |
Uwe Hermann | Factor out SD card lists into common/sdcard. |
tree | commitdiff |
2016-05-05 |
Uwe Hermann | Factor out bcd2int() into common/srdhelper. |
tree | commitdiff |
2016-05-04 |
Bert Vermeulen | Move constants out of xfp to common/plugtrx. |
tree | commitdiff |
2016-05-04 |
Uwe Hermann | mdio: Add 'TURNAROUND' long/full annotation. |
tree | commitdiff |
2016-05-04 |
Uwe Hermann | mdio: Factor out self.putff(). |
tree | commitdiff |
2016-05-04 |
Elias Oenal | Add an MDIO protocol decoder. |
tree | commitdiff |
2016-04-27 |
Uwe Hermann | Drop mdio decoder (to be replaced with another implemen... |
tree | commitdiff |
2016-04-20 |
Uwe Hermann | pwm: Use self.{ss,es}_block for consistency across... |
tree | commitdiff |
2016-04-20 |
Uwe Hermann | timing: Use self.samplenum for consistency across PDs. |
tree | commitdiff |
2016-03-20 |
fenugrec | Add initial Renesas Advanced User Debugger (AUD) decoder. |
tree | commitdiff |
2016-03-04 |
Uwe Hermann | em4100/t55xx: Fix accidentally broken wording in licens... |
tree | commitdiff |
2016-03-04 |
Uwe Hermann | Fix various incorrect PD license metadata fields. |
tree | commitdiff |
2016-03-03 |
Uwe Hermann | Add an rgb_led_ws281x decoder. |
tree | commitdiff |
2016-03-03 |
Benjamin Larsson | Add decoder for the t55xx RFID protocol |
tree | commitdiff |
2016-01-28 |
Daniel Thompson | uart: Optimize handling of samples when tx and rx are... |
tree | commitdiff |
2016-01-28 |
Petteri Aimonen | arm_itm: Use objdump instead of addr2line. |
tree | commitdiff |
2015-12-25 |
Uwe Hermann | usb_power_delivery: Raise SamplerateError instead of... |
tree | commitdiff |
2015-12-24 |
Uwe Hermann | Use self.out_binary naming consistently across all... |
tree | commitdiff |
2015-12-24 |
Uwe Hermann | Use a Python list (not tuple) for OUT_BINARY. |
tree | commitdiff |
2015-12-18 |
Uwe Hermann | em4100: Simplify the code a bit. |
tree | commitdiff |
2015-12-18 |
Uwe Hermann | em4100: Use ss/es naming for consistency across PDs. |
tree | commitdiff |
2015-12-18 |
Uwe Hermann | em4100: Eliminate some unnecessary int()s. |
tree | commitdiff |
2015-12-18 |
Uwe Hermann | em4100: Change annotation setup a bit, decode more... |
tree | commitdiff |
2015-12-18 |
Benjamin Larsson | Add RFID EM4100 protocol decoding |
tree | commitdiff |
2015-12-16 |
Uwe Hermann | usb_power_delivery: Use "if not self.samplerate" form. |
tree | commitdiff |
2015-12-16 |
Vincent Palatin | usb_power_delivery: convert double quotes to single... |
tree | commitdiff |
2015-12-04 |
Uwe Hermann | usb*: Minor cosmetics. |
tree | commitdiff |
2015-12-01 |
Stefan Brüns | usb_signalling: detect PREamble PID |
tree | commitdiff |
2015-12-01 |
Stefan Brüns | usb_signalling: add signaling states needed after LS... |
tree | commitdiff |
2015-12-01 |
Stefan Brüns | usb_{packet,request}: handle PREamble transmissions |
tree | commitdiff |
2015-11-29 |
Stefan Brüns | usb_signalling: fix SOP detection after an error condition |
tree | commitdiff |
2015-11-29 |
Stefan Brüns | usb_packet: handle errors from usb_signalling |
tree | commitdiff |
2015-11-29 |
Stefan Brüns | usb_request: Handle transmission timeouts |
tree | commitdiff |
2015-11-29 |
Stefan Brüns | usb_signalling: add option to automatically set signall... |
tree | commitdiff |
2015-11-29 |
Stefan Brüns | usb_signalling: decode RESET and Keep-Alive signalling... |
tree | commitdiff |
2015-11-29 |
Stefan Brüns | usb_signalling: use explicit positions for packet start/end |
tree | commitdiff |
2015-11-29 |
Stefan Brüns | usb_signalling: handle symbol errors in EOP state |
tree | commitdiff |
2015-11-29 |
Stefan Brüns | usb_signalling: remove unneeded syms array |
tree | commitdiff |
2015-11-29 |
Stefan Brüns | usb_signalling: remove unused ss_sop member |
tree | commitdiff |
2015-11-29 |
Stefan Brüns | usb_signalling: detect bit stuffing errors |
tree | commitdiff |
2015-11-29 |
Stefan Brüns | usb_signalling: consolidate symbol output |
tree | commitdiff |
2015-11-22 |
Paul "LeoNerd" Evans | spi: Add a 'TRANSFER' output type. |
tree | commitdiff |
2015-11-22 |
Paul "LeoNerd" Evans | Fix documentation comment in SPI decoder |
tree | commitdiff |
2015-11-21 |
Uwe Hermann | usb_power_delivery: Minor typo and whitespace fixes. |
tree | commitdiff |
2015-11-21 |
Uwe Hermann | usb_power_delivery: Use the same license header format... |
tree | commitdiff |
2015-11-21 |
Vincent Palatin | USB Power Delivery protocol decoder |
tree | commitdiff |
2015-11-21 |
Uwe Hermann | spiflash: Fix incorrect 'inputs' field. |
tree | commitdiff |
2015-11-12 |
Paul "LeoNerd" Evans | Initial attempt at MAX7219/MAX7221 decoder |
tree | commitdiff |
2015-10-22 |
Elrond | UART: Handle framing errors better |
tree | commitdiff |
2015-10-06 |
Stefan Brüns | usb_request: USB transaction decoder and PCAP generator |
tree | commitdiff |
2015-10-06 |
Uwe Hermann | usb_packet: Document CRC5 ERROR and CRC16 ERROR packets. |
tree | commitdiff |
2015-10-06 |
Uwe Hermann | usb_{signalling,packet}: Minor cosmetics. |
tree | commitdiff |
2015-10-06 |
Stefan Brüns | usb_signalling: Track USB symbol width to compensate... |
tree | commitdiff |
2015-10-06 |
Stefan Brüns | usb_packet: calculate and check CRC5/CRC16 |
tree | commitdiff |
2015-10-06 |
Roland Hieber | rfm12: fix small typo |
tree | commitdiff |
2015-09-15 |
Daniel Elstner | jitter, pwm: Avoid Unicode string literals |
tree | commitdiff |
2015-09-14 |
Uwe Hermann | can: Improve stuff bit annotation placement. |
tree | commitdiff |
2015-09-14 |
Uwe Hermann | can: Emit bit value annotations. |
tree | commitdiff |
2015-09-03 |
Uwe Hermann | jtag_stm32: Decode IDCODE contents as strings (not... |
tree | commitdiff |
2015-09-03 |
Uwe Hermann | jtag_stm32: Decode more fields, improve IDCODE handling. |
tree | commitdiff |
2015-09-03 |
Uwe Hermann | jtag_stm32: Cleanups, shorter code. |
tree | commitdiff |
2015-09-03 |
Uwe Hermann | jtag_stm32: Update to reflect change in jtag OUT_PYTHON. |
tree | commitdiff |
2015-09-03 |
Uwe Hermann | jtag: Submit bit samplenumbers together with the bits. |
tree | commitdiff |
2015-09-03 |
Uwe Hermann | jtag_stm32: Fix incorrect handling of registers. |
tree | commitdiff |
2015-09-03 |
Uwe Hermann | jtag: Add more annotations, fix a SHIFT-IR/-DR issue. |
tree | commitdiff |
2015-09-03 |
Uwe Hermann | jtag: Fix/enable OUT_PYTHON output. |
tree | commitdiff |
2015-08-21 |
Uwe Hermann | nunchuk: Fix inverted button press logic. |
tree | commitdiff |
2015-08-18 |
Uwe Hermann | mrf24j40: Fix a register address typo. |
tree | commitdiff |
2015-08-17 |
Uwe Hermann | tlc5620: Add options for per-DAC Vref, show voltages. |
tree | commitdiff |
2015-08-17 |
Uwe Hermann | tlc5620: Handle the case of less than 11 bits in a... |
tree | commitdiff |
2015-08-17 |
Uwe Hermann | tlc5620: Properly handle LOAD and LDAC based operations. |
tree | commitdiff |
2015-08-17 |
Uwe Hermann | tlc5620: Only decode the last 11 bits, ignore the rest. |
tree | commitdiff |
2015-08-17 |
Uwe Hermann | tlc5620: Fix incorrect DAC selection decode, add more... |
tree | commitdiff |
next |