Supported hardware

sigrok is intended as a flexible, cross-platform, and hardware-independent software suite, i.e., it supports various devices from many different vendors.

Here is a list of currently supported devices (various stages of completeness) and devices we plan to support in the near future.

Logic analyzers

Device	Status	Comments
	supported	The Saleae Logic is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.
	supported	The EE Electronics ESLA100 is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.
	supported	The ASIX SIGMA/SIGMA2 is a USB-based, 16-channel logic analyzer with up to 200MHz sampling rate, and with 256Mbit on-board memory.
	supported	The Openbench Logic Sniffer (OLS) is a USB-based (and FPGA-based), 32-channel logic analyzer with up to 100MHz sampling rate and advanced trigger functionality. It is a fully open source device — the circuit design, VHDL code for the FPGA, firmware for the PIC microcontroller and Java-based client software are all freely available. It uses the extended SUMP protocol.
	supported	The Logic Shrimp is a USB-based, 4-channel logic analyzer with up to 20MHz sampling rate. It uses the extended SUMP protocol.
	supported	The ZEROPLUS Logic Cube LAP-C (16032) is a USB-based, 16-channel logic analyzer with up to 100MHz sampling rate.
	supported	The ChronoVu LA8 is a USB-based, 8-channel logic analyzer with up to 100MHz sampling rate.
	supported	The Robomotic BugLogic 3 is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.
	supported	The Robomotic MiniLogic is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.
	supported	The Lcsoft Mini Board is a Cypress FX2 eval board, which can be used as USB-based, 16-channel logic analyzer with up to 24MHz sampling rate.
	supported	The Braintechnology USB-LPS is a USB-based, 16-channel logic analyzer (and signal generator) with up to 24MHz sampling rate.
	supported	The CWAV USBee SX is a USB-based, 8-channel logic analyzer (and signal generator) with up to 24MHz sampling rate.
	supported	The ARMFLY Mini-Logic is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.
	supported	The Braintechnology USB Interface V2.x is a Cypress FX2 eval board, which can be used as USB-based, 16-channel logic analyzer with up to 24MHz sampling rate.
File:Buspirate v3 front.jpg	in progress	The Buspirate v3 is a USB-based, 5-channel logic analyzer with up to 1MHz sampling rate. It uses the extended SUMP protocol. The Buspirate supports a logic analyzer mode and can thus be used for sample captures, however only at low speeds.
	in progress	The RockyLogic Ant18e is a USB-based, 18-channel logic analyzer with up to 1GHz sampling rate.
	in progress	The RockyLogic Ant8 is a USB-based, 8-channel logic analyzer with up to 500MHz sampling rate.
	planned	The Ikalogic SCANALOGIC-2 PRO is a USB-based, 4-channel logic analyzer with up to 20MHz sampling rate.
	planned	The Microchip PICkit2 is a USB-based, 3-channel logic analyzer with up to 1MHz sampling rate. The PICkit2 is actually a programmer/debugger for PIC microcontrollers, but it can also be used as logic analyzer.
	planned	The MiniLA Mockup is a USB-based, 32-channel logic analyzer with up to 100MHz sampling rate.
	planned	The Acute PKLA-1216 is a USB-based, 16-channel logic analyzer with up to 200MHz sampling rate.
	planned	The Saleae Logic16 is a USB-based, 16-channel logic analyzer with 100/50/25/12.5MHz sampling rate (at 2/4/8/16 enabled channels).
	planned	The Intronix Logicport LA1034 is a USB-based (and FPGA-based), 34-channel logic analyzer with up to 500MHz sampling rate.

Mixed-signal devices

Devices which can be used as both logic analyzer and oscilloscopes.

Device	Status	Comments
	supported	The ARMFLY AX-Pro is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels. Note: Only the logic analyzer functionality is supported so far, analog support is work in progress.
	supported	The EE Electronics ESLA201A is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels. Note: Only the logic analyzer functionality is supported so far, analog support is work in progress.
	in progress	The Link Instruments MSO-19‎ is a USB-based, 1-channel 2GSa/s oscilloscope, 8-channel 200MSa/s logic analyzer, 100MSa/s pattern generator and a TDR.
File:QA100 Full.JPG	planned	The QuantAsylum QA100 is a USB-based, mixed-mode oscilloscope with 12 digital inputs, 2 analog, 1 trigger and 1 audio waveform generator.
	planned	The PoLabs PoScope Basic2 is a USB-based, 16-channel logic analyzer (plus oscilloscope, signal/pattern generator, and more) with up to 8MHz sampling rate.
File:Rigol VS5202D Full.jpg	planned	The Rigol VS5202D is a USB-based, 2-channel analog oscilloscope (400MSa/S, 200MHz bandwidth) and 16-channel logic analyzer (200MHz sampling rate).
	planned	The Agilent MSO7104A is a standalone, 4-channel mixed-signal digital storage oscilloscope (1GHz bandwidth, 4GSa/s samplerate, 16-channel logic analyzer).

Oscilloscopes

Device	Status	Comments
	supported	The Hantek DSO-2090 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 40MHz and 100MS/s sampling rate.
	in progress	The Hantek DSO-5200A is a USB-based, 2-channel oscilloscope with an analog bandwidth of 200MHz and 250MS/s sampling rate.
	planned	The Velleman PCSU1000 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 50MHz and 1GS/s sampling rate.
	planned	The Pico Technology PicoScope 2203 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 5MHz and 40/20MS/s sampling rate (1-/2-channel one-shot mode).
	planned	The Pico Technology PicoScope 2205 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 25MHz and 200/100MS/s sampling rate (1-/2-channel one-shot mode).
	planned	The Pico Technology PicoScope 3206 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 200MHz and 200/100MS/s sampling rate (1-/2-channel one-shot mode).

Multimeters

Device	Status	Comments
	supported	The Agilent U123xA series are 6000 counts handheld digital multimeters with IR connectivity.
	supported	The Fluke 187/189 are 50000 counts, handheld digital multimeters with RS232 connectivity.
	supported	The Fluke 287/289 are 50000 counts handheld digital multimeters with RS232 connectivity.
	supported	The RadioShack 22-812 is a 4000 counts handheld digital multimeter with RS232 connectivity.
	supported	The Victor 70C is a 4000 counts, CAT II handheld digital multimeter with USB connectivity.
	supported	The Victor 86C is a 4000 counts, CAT III (1000V) handheld digital multimeter with USB connectivity.
	in progress	The TekPower TP4000ZC is a 4000 counts handheld digital multimeter with RS232 connectivity.
	in progress	The UNI-T UT61D is a 6000 counts, CAT II (600V) / CAT III (300V) handheld digital multimeter with RS232 or USB connectivity.
	in progress	The V&A VA18B is a 6000 counts, CAT II (1000V) handheld digital multimeter with USB connectivity.
	planned	The Digitek DT4000ZC is a 4000 counts, CAT II (600V), handheld digital multimeter with RS232 connectivity.
	planned	The MASTECH MAS345 is a 4000 counts, CAT II handheld digital multimeter with RS232 connectivity.
	planned	The MASTECH M9803R is a 4000 counts, CAT II (1000V) digital bench multimeter with RS232 connectivity.
	planned	The Peaktech 4370 is a 2000 counts, CAT II (1000V) handheld digital multimeter with RS232 connectivity.
	planned	The UNI-T UT61E is a 22000 counts, CAT II (600V) / CAT III (300V) handheld digital multimeter with RS232 or USB connectivity.
	planned	The Voltcraft M-4660A is a 20000 counts, handheld digital multimeter with RS232 connectivity.
	planned	The Voltcraft VC-820 is a 4000 counts, CAT III (1000V) / CAT IV (600V) handheld digital multimeter with RS232 or USB connectivity.
	planned	The Voltcraft VC-840 is a 4000 counts, CAT IV (600V) handheld digital multimeter with RS232 or USB connectivity.
	planned	The Escort 179 is a 10000 counts, handheld digital multimeter with RS232 connectivity.

Dataloggers

Device	Status	Comments
	in progress	The Tondaj SL-814 is a sound level meter with USB connectivity.
	planned	The RDing TEMPer is a USB-based temperature logger.
	planned	The RDing TEMPer1 is a USB-based temperature logger.
	planned	The RDing TEMPer Gold is a USB-based temperature logger.
	planned	The UNI-T UT325 is a dual thermocouple logging thermometer.

Function generators

Device	Status	Comments
	planned	The Hantek DDS-3X25 is a 25MHz PC-based function generator (requires a USB connection to work).
	planned	The Siglent SDG1010 is a 10MHz function generator with USB connectivity.

Power supplies

TODO

GPIB interfaces

Device	Status	Comments
	planned	The Beiming S82357 is a USB-based, hardware-implemented GPIB interface (a clone of the Agilent 82357B USB/GPIB interface).
	planned	The GPIB-USB 82357B clone is a USB-based, hardware-implemented GPIB interface (a clone of the Agilent 82357B USB/GPIB interface).
	planned	The ICS 488-USB is a USB-based GPIB interface.
	planned	The National Instruments GPIB-ENET is an Ethernet-based, hardware-implemented GPIB interface.
	planned	The National Instruments GPIB-USB-HS is a USB-based, hardware-implemented GPIB interface.
	planned	The Prologix GPIB-USB a USB-based, firmware-implemented GPIB interface.

Potential other candidates

If you own any other logic analyzers (or oscilloscopes, multimeters, dataloggers, etc.) and want to add support for them in sigrok (or donate/lend devices to developers), please let us know. We're always happy to add more hardware support! Contact Bert Vermeulen and Uwe Hermann if you want to help out.