Difference between revisions of "Pico Technology PicoScope 2203"

From sigrok
Jump to: navigation, search
(Pico Technology PicoScope 2203)
 
 
(8 intermediate revisions by 2 users not shown)
Line 1: Line 1:
The [http://www.picotech.com/picoscope2200-specifications.html Pico Technology PicoScope 2203] is a 2-channel PC oscilloscope.
+
[[File:Picoscope 2203.png|thumb|right|PicoScope 2203.]]
 +
 
 +
The [http://www.picotech.com/picoscope2200-specifications.html Pico Technology PicoScope 2203] is a 2-channel USB-based PC oscilloscope (and spectrum analyzer and data logger and logic analyzer). It supports a bandwidth of 5MHz. The max. sampling rate (one-shot) is 40 MS/s (one channel mode) or 20 MS/s (two channel mode). The max. sampling rate for repetitive signals is 1 GS/s, the max. sampling rate in continuous streaming mode is 1 MS/s.
 +
 
 +
See [[Pico Technology PicoScope 2203/Info]] for more details (such as '''lsusb -vvv''' output) about the device.
 +
 
 +
== Hardware ==
 +
 
 +
* Xilinx Spartan XC3S250E
 +
* Cypress CY7C68013A-56PVXC
 +
* Analog Devices AD9288
 +
* Analog Devices AD8132
 +
* Meder Electronics SIL05-1A72-71D
 +
* Maxim MAX889S
 +
* HC4052
 +
 
 +
== Photos ==
 +
 
 +
<gallery>
 +
File:Picoscope 2203 front.jpg|<small>Front</small>
 +
File:Picoscope 2203 back.jpg|<small>Back</small>
 +
File:Picoscope 2203 pcb front.jpg|<small>PCB front</small>
 +
File:Picoscope 2203 pcb back.jpg|<small>PCB back</small>
 +
</gallery>
 +
 
 +
See also [http://www.flickr.com/photos/uwehermann/sets/72157625721726427/ this flickr set] for more PCB photos of the device.
 +
 
 +
== Protocol ==
 +
 
 +
=== Firmware ===
 +
 
 +
The usual Cypress FX2 firmware upload mechanism is used to upload a special FX2 firmware.
 +
 
 +
=== Start acquisition ===
 +
 
 +
=== Sample format ===
 +
 
 +
=== End acquisition ===
 +
 
 +
=== Triggers ===
 +
 
 +
=== Voltage ranges ===
 +
 
 +
== Resources ==
 +
 
 +
* [http://www.picotech.com/document/datasheets/PicoScope2200.pdf Datasheet]
 +
* [http://www.picotech.com/picoscope-oscilloscope-software.html Vendor software]
 +
 
 +
[[Category:Device]]
 +
[[Category:Oscilloscope]]
 +
[[Category:Planned]]

Latest revision as of 04:34, 25 January 2013

PicoScope 2203.

The Pico Technology PicoScope 2203 is a 2-channel USB-based PC oscilloscope (and spectrum analyzer and data logger and logic analyzer). It supports a bandwidth of 5MHz. The max. sampling rate (one-shot) is 40 MS/s (one channel mode) or 20 MS/s (two channel mode). The max. sampling rate for repetitive signals is 1 GS/s, the max. sampling rate in continuous streaming mode is 1 MS/s.

See Pico Technology PicoScope 2203/Info for more details (such as lsusb -vvv output) about the device.

Hardware

  • Xilinx Spartan XC3S250E
  • Cypress CY7C68013A-56PVXC
  • Analog Devices AD9288
  • Analog Devices AD8132
  • Meder Electronics SIL05-1A72-71D
  • Maxim MAX889S
  • HC4052

Photos

See also this flickr set for more PCB photos of the device.

Protocol

Firmware

The usual Cypress FX2 firmware upload mechanism is used to upload a special FX2 firmware.

Start acquisition

Sample format

End acquisition

Triggers

Voltage ranges

Resources