Difference between revisions of "Logic Shrimp"
Jump to navigation
Jump to search
Uwe Hermann (talk | contribs) (Logic Shrimp) |
|||
| Line 1: | Line 1: | ||
The [http://dangerousprototypes.com/docs/Logic_Shrimp_logic_analyzer Logic Shrimp] is a USB-based logic analyzer. | [[File:logic-shrimp-front.png|thumb|right|Logic Shrimp]] | ||
[[File:logic-shrimp-front.png|thumb|right|Back of PCB]] | |||
The [http://dangerousprototypes.com/docs/Logic_Shrimp_logic_analyzer Logic Shrimp] is a USB-based logic analyzer created by [http://dangerousprototypes.com/ Dangerous Prototypes]. The design is available under a Creative Commons (CC-BY-SA) license. | |||
== Hardware == | == Hardware == | ||
The device essentially consists of a PIC microchip running at 20MHz, sampling each of its 4 probes into its own 256K SRAM chip. A buffer chip makes the design 5V tolerant. | |||
== Driver == | |||
The PIC uses the sump protocol, as used by the [[Openbench Logic Sniffer]] driver. It is thus supported in sigrok out of the box. However, the current firmware in the Logic Shrimp does not properly publish metadata according to its capabilities. In order to get valid data from it, make sure to always restrict the probes sampled to 1-4. | |||
Revision as of 22:09, 28 April 2011
The Logic Shrimp is a USB-based logic analyzer created by Dangerous Prototypes. The design is available under a Creative Commons (CC-BY-SA) license.
Hardware
The device essentially consists of a PIC microchip running at 20MHz, sampling each of its 4 probes into its own 256K SRAM chip. A buffer chip makes the design 5V tolerant.
Driver
The PIC uses the sump protocol, as used by the Openbench Logic Sniffer driver. It is thus supported in sigrok out of the box. However, the current firmware in the Logic Shrimp does not properly publish metadata according to its capabilities. In order to get valid data from it, make sure to always restrict the probes sampled to 1-4.