avr_isp: add test for ATmega328/P

[sigrok-test.git] / decoder / test / spiflash / winbond_w25q80dv_chip_erase_and_writes_end.output

8-25 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
28-45 spiflash: bit: "Write operation in progress.
Internal write enable latch is not set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
28-45 spiflash: field: "Status register"
8-45 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
62-80 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
82-99 spiflash: bit: "No write operation in progress.
Internal write enable latch is not set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
82-99 spiflash: field: "Status register"
62-99 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
252-269 spiflash: field: "Command: Read data (READ)" "Command: Read data" "Cmd: Read data" "Cmd: READ" "READ"
272-288 spiflash: bit: "Address bits 23..16: 0x0a" "Addr bits 23..16: 0x0a" "Addr bits 23..16" "A23..A16"
290-307 spiflash: bit: "Address bits 15..8: 0xea" "Addr bits 15..8: 0xea" "Addr bits 15..8" "A15..A8"
308-325 spiflash: bit: "Address bits 7..0: 0xfd" "Addr bits 7..0: 0xfd" "Addr bits 7..0" "A7..A0"
272-325 spiflash: field: "Address: 0x0aeafd" "Addr: 0x0aeafd" "0x0aeafd"
330-628 spiflash: field: "Data (16 bytes)"
252-633 spiflash: read: "Read data (addr 0x0aeafd, 16 bytes): ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ"
677-694 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
698-714 spiflash: bit: "No write operation in progress.
Internal write enable latch is not set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
698-714 spiflash: field: "Status register"
677-714 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
735-753 spiflash: wren: "Command: Write enable (WREN)" "Command: Write enable" "Cmd: Write enable" "Cmd: WREN" "WREN"
768-784 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
788-806 spiflash: bit: "No write operation in progress.
Internal write enable latch is set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
788-806 spiflash: field: "Status register"
768-806 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
827-844 spiflash: field: "Command: Page program (PP)" "Command: Page program" "Cmd: Page program" "Cmd: PP" "PP"
848-865 spiflash: bit: "Address bits 23..16: 0x0a" "Addr bits 23..16: 0x0a" "Addr bits 23..16" "A23..A16"
866-883 spiflash: bit: "Address bits 15..8: 0xea" "Addr bits 15..8: 0xea" "Addr bits 15..8" "A15..A8"
885-901 spiflash: bit: "Address bits 7..0: 0xfd" "Addr bits 7..0: 0xfd" "Addr bits 7..0" "A7..A0"
848-901 spiflash: field: "Address: 0x0aeafd" "Addr: 0x0aeafd" "0x0aeafd"
906-962 spiflash: field: "Data (3 bytes)"
827-967 spiflash: pp: "Page program (addr 0x0aeafd, 3 bytes): *  "
1010-1026 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
1030-1047 spiflash: bit: "Write operation in progress.
Internal write enable latch is set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
1030-1047 spiflash: field: "Status register"
1010-1047 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
1072-1090 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
1092-1109 spiflash: bit: "Write operation in progress.
Internal write enable latch is set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
1092-1109 spiflash: field: "Status register"
1072-1109 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
1134-1151 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
1154-1171 spiflash: bit: "No write operation in progress.
Internal write enable latch is not set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
1154-1171 spiflash: field: "Status register"
1134-1171 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
1190-1207 spiflash: wren: "Command: Write enable (WREN)" "Command: Write enable" "Cmd: Write enable" "Cmd: WREN" "WREN"
1223-1239 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
1243-1260 spiflash: bit: "No write operation in progress.
Internal write enable latch is set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
1243-1260 spiflash: field: "Status register"
1223-1260 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
1277-1293 spiflash: field: "Command: Page program (PP)" "Command: Page program" "Cmd: Page program" "Cmd: PP" "PP"
1298-1314 spiflash: bit: "Address bits 23..16: 0x0a" "Addr bits 23..16: 0x0a" "Addr bits 23..16" "A23..A16"
1316-1333 spiflash: bit: "Address bits 15..8: 0xeb" "Addr bits 15..8: 0xeb" "Addr bits 15..8" "A15..A8"
1334-1351 spiflash: bit: "Address bits 7..0: 0x00" "Addr bits 7..0: 0x00" "Addr bits 7..0" "A7..A0"
1298-1351 spiflash: field: "Address: 0x0aeb00" "Addr: 0x0aeb00" "0x0aeb00"
1355-1618 spiflash: field: "Data (13 bytes)"
1277-1623 spiflash: pp: "Page program (addr 0x0aeb00, 13 bytes):   (.)(.)    *"
1667-1683 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
1687-1704 spiflash: bit: "Write operation in progress.
Internal write enable latch is set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
1687-1704 spiflash: field: "Status register"
1667-1704 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
1729-1745 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
1749-1767 spiflash: bit: "Write operation in progress.
Internal write enable latch is set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
1749-1767 spiflash: field: "Status register"
1729-1767 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
1791-1807 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
1811-1828 spiflash: bit: "Write operation in progress.
Internal write enable latch is set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
1811-1828 spiflash: field: "Status register"
1791-1828 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
1853-1869 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
1873-1890 spiflash: bit: "Write operation in progress.
Internal write enable latch is set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
1873-1890 spiflash: field: "Status register"
1853-1890 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
1915-1933 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
1935-1952 spiflash: bit: "No write operation in progress.
Internal write enable latch is not set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
1935-1952 spiflash: field: "Status register"
1915-1952 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
1971-1988 spiflash: wren: "Command: Write enable (WREN)" "Command: Write enable" "Cmd: Write enable" "Cmd: WREN" "WREN"
2004-2020 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
2024-2041 spiflash: bit: "No write operation in progress.
Internal write enable latch is set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
2024-2041 spiflash: field: "Status register"
2004-2041 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
2092-2109 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
2113-2129 spiflash: bit: "No write operation in progress.
Internal write enable latch is set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
2113-2129 spiflash: field: "Status register"
2092-2129 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
2145-2161 spiflash: field: "Command: Read data (READ)" "Command: Read data" "Cmd: Read data" "Cmd: READ" "READ"
2166-2182 spiflash: bit: "Address bits 23..16: 0x0a" "Addr bits 23..16: 0x0a" "Addr bits 23..16" "A23..A16"
2184-2201 spiflash: bit: "Address bits 15..8: 0xea" "Addr bits 15..8: 0xea" "Addr bits 15..8" "A15..A8"
2203-2219 spiflash: bit: "Address bits 7..0: 0xfd" "Addr bits 7..0: 0xfd" "Addr bits 7..0" "A7..A0"
2166-2219 spiflash: field: "Address: 0x0aeafd" "Addr: 0x0aeafd" "0x0aeafd"
2224-2550 spiflash: field: "Data (16 bytes)"
2145-2558 spiflash: read: "Read data (addr 0x0aeafd, 16 bytes): *    (.)(.)    *"
2849-2866 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
2870-2887 spiflash: bit: "No write operation in progress.
Internal write enable latch is set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
2870-2887 spiflash: field: "Status register"
2849-2887 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
2912-2928 spiflash: field: "Command: Read data (READ)" "Command: Read data" "Cmd: Read data" "Cmd: READ" "READ"
2931-2948 spiflash: bit: "Address bits 23..16: 0x0a" "Addr bits 23..16: 0x0a" "Addr bits 23..16" "A23..A16"
2950-2966 spiflash: bit: "Address bits 15..8: 0xea" "Addr bits 15..8: 0xea" "Addr bits 15..8" "A15..A8"
2968-2985 spiflash: bit: "Address bits 7..0: 0xfd" "Addr bits 7..0: 0xfd" "Addr bits 7..0" "A7..A0"
2931-2985 spiflash: field: "Address: 0x0aeafd" "Addr: 0x0aeafd" "0x0aeafd"
2992-3293 spiflash: field: "Data (16 bytes)"
2912-3300 spiflash: read: "Read data (addr 0x0aeafd, 16 bytes): *    (.)(.)    *"
3678-3694 spiflash: field: "Command: Read data (READ)" "Command: Read data" "Cmd: Read data" "Cmd: READ" "READ"
3697-3714 spiflash: bit: "Address bits 23..16: 0x00" "Addr bits 23..16: 0x00" "Addr bits 23..16" "A23..A16"
3716-3732 spiflash: bit: "Address bits 15..8: 0x05" "Addr bits 15..8: 0x05" "Addr bits 15..8" "A15..A8"
3734-3751 spiflash: bit: "Address bits 7..0: 0x39" "Addr bits 7..0: 0x39" "Addr bits 7..0" "A7..A0"
3697-3751 spiflash: field: "Address: 0x000539" "Addr: 0x000539" "0x000539"
3756-4084 spiflash: field: "Data (16 bytes)"
3678-4089 spiflash: read: "Read data (addr 0x000539, 16 bytes): ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ"
4134-4150 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
4154-4171 spiflash: bit: "No write operation in progress.
Internal write enable latch is set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
4154-4171 spiflash: field: "Status register"
4134-4171 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
4191-4208 spiflash: wren: "Command: Write enable (WREN)" "Command: Write enable" "Cmd: Write enable" "Cmd: WREN" "WREN"
4224-4241 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
4244-4261 spiflash: bit: "No write operation in progress.
Internal write enable latch is set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
4244-4261 spiflash: field: "Status register"
4224-4261 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
4282-4298 spiflash: field: "Command: Page program (PP)" "Command: Page program" "Cmd: Page program" "Cmd: PP" "PP"
4303-4321 spiflash: bit: "Address bits 23..16: 0x00" "Addr bits 23..16: 0x00" "Addr bits 23..16" "A23..A16"
4321-4338 spiflash: bit: "Address bits 15..8: 0x05" "Addr bits 15..8: 0x05" "Addr bits 15..8" "A15..A8"
4340-4356 spiflash: bit: "Address bits 7..0: 0x39" "Addr bits 7..0: 0x39" "Addr bits 7..0" "A7..A0"
4303-4356 spiflash: field: "Address: 0x000539" "Addr: 0x000539" "0x000539"
4360-4680 spiflash: field: "Data (16 bytes)"
4282-4685 spiflash: pp: "Page program (addr 0x000539, 16 bytes): * Hello,   T2  *"
4729-4745 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
4749-4766 spiflash: bit: "Write operation in progress.
Internal write enable latch is set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
4749-4766 spiflash: field: "Status register"
4729-4766 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
4791-4807 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
4811-4828 spiflash: bit: "Write operation in progress.
Internal write enable latch is set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
4811-4828 spiflash: field: "Status register"
4791-4828 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
4853-4870 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
4873-4890 spiflash: bit: "Write operation in progress.
Internal write enable latch is set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
4873-4890 spiflash: field: "Status register"
4853-4890 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
4915-4932 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
4935-4952 spiflash: bit: "Write operation in progress.
Internal write enable latch is set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
4935-4952 spiflash: field: "Status register"
4915-4952 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
4977-4994 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
4997-5014 spiflash: bit: "Write operation in progress.
Internal write enable latch is not set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
4997-5014 spiflash: field: "Status register"
4977-5014 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
5039-5056 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
5059-5076 spiflash: bit: "No write operation in progress.
Internal write enable latch is not set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
5059-5076 spiflash: field: "Status register"
5039-5076 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
5092-5108 spiflash: field: "Command: Read data (READ)" "Command: Read data" "Cmd: Read data" "Cmd: READ" "READ"
5113-5129 spiflash: bit: "Address bits 23..16: 0x00" "Addr bits 23..16: 0x00" "Addr bits 23..16" "A23..A16"
5131-5149 spiflash: bit: "Address bits 15..8: 0x05" "Addr bits 15..8: 0x05" "Addr bits 15..8" "A15..A8"
5149-5166 spiflash: bit: "Address bits 7..0: 0x39" "Addr bits 7..0: 0x39" "Addr bits 7..0" "A7..A0"
5113-5166 spiflash: field: "Address: 0x000539" "Addr: 0x000539" "0x000539"
5171-5498 spiflash: field: "Data (16 bytes)"
5092-5506 spiflash: read: "Read data (addr 0x000539, 16 bytes): * Hello,   T2  *"
5823-5839 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
5844-5860 spiflash: bit: "No write operation in progress.
Internal write enable latch is not set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
5844-5860 spiflash: field: "Status register"
5823-5860 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
5885-5902 spiflash: field: "Command: Read data (READ)" "Command: Read data" "Cmd: Read data" "Cmd: READ" "READ"
5905-5921 spiflash: bit: "Address bits 23..16: 0x00" "Addr bits 23..16: 0x00" "Addr bits 23..16" "A23..A16"
5923-5940 spiflash: bit: "Address bits 15..8: 0x05" "Addr bits 15..8: 0x05" "Addr bits 15..8" "A15..A8"
5942-5958 spiflash: bit: "Address bits 7..0: 0x39" "Addr bits 7..0: 0x39" "Addr bits 7..0" "A7..A0"
5905-5958 spiflash: field: "Address: 0x000539" "Addr: 0x000539" "0x000539"
5965-6290 spiflash: field: "Data (16 bytes)"
5885-6298 spiflash: read: "Read data (addr 0x000539, 16 bytes): * Hello,   T2  *"
6672-6688 spiflash: field: "Command: Read data (READ)" "Command: Read data" "Cmd: Read data" "Cmd: READ" "READ"
6691-6708 spiflash: bit: "Address bits 23..16: 0x00" "Addr bits 23..16: 0x00" "Addr bits 23..16" "A23..A16"
6710-6726 spiflash: bit: "Address bits 15..8: 0x13" "Addr bits 15..8: 0x13" "Addr bits 15..8" "A15..A8"
6728-6746 spiflash: bit: "Address bits 7..0: 0x37" "Addr bits 7..0: 0x37" "Addr bits 7..0" "A7..A0"
6691-6746 spiflash: field: "Address: 0x001337" "Addr: 0x001337" "0x001337"
6749-7047 spiflash: field: "Data (16 bytes)"
6672-7052 spiflash: read: "Read data (addr 0x001337, 16 bytes): ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ"
7128-7146 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
7149-7165 spiflash: bit: "No write operation in progress.
Internal write enable latch is not set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
7149-7165 spiflash: field: "Status register"
7128-7165 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
7188-7204 spiflash: wren: "Command: Write enable (WREN)" "Command: Write enable" "Cmd: Write enable" "Cmd: WREN" "WREN"
7220-7237 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
7240-7257 spiflash: bit: "No write operation in progress.
Internal write enable latch is set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
7240-7257 spiflash: field: "Status register"
7220-7257 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
7278-7294 spiflash: field: "Command: Page program (PP)" "Command: Page program" "Cmd: Page program" "Cmd: PP" "PP"
7299-7315 spiflash: bit: "Address bits 23..16: 0x00" "Addr bits 23..16: 0x00" "Addr bits 23..16" "A23..A16"
7317-7334 spiflash: bit: "Address bits 15..8: 0x13" "Addr bits 15..8: 0x13" "Addr bits 15..8" "A15..A8"
7336-7352 spiflash: bit: "Address bits 7..0: 0x37" "Addr bits 7..0: 0x37" "Addr bits 7..0" "A7..A0"
7299-7352 spiflash: field: "Address: 0x001337" "Addr: 0x001337" "0x001337"
7356-7676 spiflash: field: "Data (16 bytes)"
7278-7681 spiflash: pp: "Page program (addr 0x001337, 16 bytes): * Hello, Flash *"
7725-7741 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
7745-7762 spiflash: bit: "Write operation in progress.
Internal write enable latch is set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
7745-7762 spiflash: field: "Status register"
7725-7762 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
7787-7803 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
7807-7824 spiflash: bit: "Write operation in progress.
Internal write enable latch is set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
7807-7824 spiflash: field: "Status register"
7787-7824 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
7849-7867 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
7869-7886 spiflash: bit: "Write operation in progress.
Internal write enable latch is set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
7869-7886 spiflash: field: "Status register"
7849-7886 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
7911-7928 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
7931-7948 spiflash: bit: "Write operation in progress.
Internal write enable latch is set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
7931-7948 spiflash: field: "Status register"
7911-7948 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
7973-7990 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
7993-8010 spiflash: bit: "Write operation in progress.
Internal write enable latch is not set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
7993-8010 spiflash: field: "Status register"
7973-8010 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
8035-8052 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
8055-8072 spiflash: bit: "No write operation in progress.
Internal write enable latch is not set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
8055-8072 spiflash: field: "Status register"
8035-8072 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
8088-8104 spiflash: field: "Command: Read data (READ)" "Command: Read data" "Cmd: Read data" "Cmd: READ" "READ"
8109-8125 spiflash: bit: "Address bits 23..16: 0x00" "Addr bits 23..16: 0x00" "Addr bits 23..16" "A23..A16"
8127-8143 spiflash: bit: "Address bits 15..8: 0x13" "Addr bits 15..8: 0x13" "Addr bits 15..8" "A15..A8"
8145-8162 spiflash: bit: "Address bits 7..0: 0x37" "Addr bits 7..0: 0x37" "Addr bits 7..0" "A7..A0"
8109-8162 spiflash: field: "Address: 0x001337" "Addr: 0x001337" "0x001337"
8167-8493 spiflash: field: "Data (16 bytes)"
8088-8501 spiflash: read: "Read data (addr 0x001337, 16 bytes): * Hello, Flash *"
8789-8806 spiflash: field: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
8810-8828 spiflash: bit: "No write operation in progress.
Internal write enable latch is not set.
Block protection bits (BP3-BP0): 0x0.
Device is not in continuously program mode (CP mode).
Status register writes are allowed.
"
8810-8828 spiflash: field: "Status register"
8789-8828 spiflash: rdsr: "Command: Read status register (RDSR)" "Command: Read status register" "Cmd: Read status register" "Cmd: RDSR" "RDSR"
8852-8868 spiflash: field: "Command: Read data (READ)" "Command: Read data" "Cmd: Read data" "Cmd: READ" "READ"
8871-8888 spiflash: bit: "Address bits 23..16: 0x00" "Addr bits 23..16: 0x00" "Addr bits 23..16" "A23..A16"
8890-8906 spiflash: bit: "Address bits 15..8: 0x13" "Addr bits 15..8: 0x13" "Addr bits 15..8" "A15..A8"
8908-8924 spiflash: bit: "Address bits 7..0: 0x37" "Addr bits 7..0: 0x37" "Addr bits 7..0" "A7..A0"
8871-8924 spiflash: field: "Address: 0x001337" "Addr: 0x001337" "0x001337"
8932-9250 spiflash: field: "Data (16 bytes)"
8852-9257 spiflash: read: "Read data (addr 0x001337, 16 bytes): * Hello, Flash *"