projects / sigrok-dumps.git / blame
| Commit | Line | Data |
|---|---|---|
| e164fd86 B |
1 | ------------------------------------------------------------------------------- |
| 2 | Philips RC-6 remote control captures | |
| 3 | ------------------------------------------------------------------------------- | |
| 4 | ||
| 5 | These captures contain the IR data sent by various remote controls. | |
| 6 | ||
| 7 | Logic analyzer setup | |
| 8 | -------------------- | |
| 9 | ||
| 10 | The logic analyzer used was a Saleae Logic (at 1MHz): | |
| 11 | ||
| 12 | Probe RC-6 | |
| 13 | ---------------- | |
| 14 | 0 IR | |
| 15 | 1 Raw | |
| 16 | ||
| 17 | The data was captured using a TSOP1736 directly connected to channel 0. | |
| 18 | For comparison a phototransistor is connected to channel 1. Only channel 0 | |
| 19 | should be used for decoding. | |
| 20 | ||
| 21 | ||
| 22 | philips_RC2143604_numbers.sr | |
| 23 | ---------------------------- | |
| 24 | ||
| 25 | This capture was taken with a Philips RC2143604 remote control. The | |
| 26 | sequence of keys is "power", 1, 2, ..., 9, 0. | |
| 27 | ||
| 28 | Note that this remote uses Mode 0. | |
| 29 | ||
| 30 | ||
| 31 | philips_unknown_numbers.sr | |
| 32 | -------------------------- | |
| 33 | ||
| 34 | This capture was taken with an unknown Philips remote control. The | |
| 35 | sequence of keys is "power", 1, 2, ..., 9. | |
| 36 | ||
| 37 | Note that this remote uses Mode 0. |