Agilent DSO1000 series
Revision as of 02:12, 7 May 2014 by Uwe Hermann (talk | contribs)
 | |
| Status | supported |
|---|---|
| Source code | rigol-ds |
| Channels | 2-4 (depending on model) |
| Samplerate | 2GSa/s (2ch), 1GSa/s (4ch) |
| Samplerate (eq. time) | ? |
| Analog bandwidth | 60-200MHz (depending on model) |
| Vertical resolution | 8bits |
| Triggers | edge, pulse width, bit pattern, composite video, alternate |
| Input impedance | 1MΩ‖18pF 300 V RMS CAT I |
| Memory | 20kpts (2ch), 10kpts (4ch) |
| Display | 5.7" QVGA (320x240) |
| Connectivity | USB host/device |
| Features | agilent.com |
The Agilent DSO1000 series are 2-4 channel oscilloscopes with 2GSa/s sampling rate, analog bandwidth of 60-200MHz and USB connectivity.
The underlying hardware and firmware is very clearly (and in places hastily) rebadged from the Rigol DS2000 series.
Devices
| Model | Bandwidth | Channels |
|---|---|---|
| DSO1002A | 60MHz | 2 |
| DSO1004A | 60MHz | 4 |
| DSO1012A | 100MHz | 2 |
| DSO1014A | 100MHz | 4 |
| DSO1022A | 200MHz | 2 |
| DSO1024A | 200MHz | 4 |