Difference between revisions of "Kecheng KC-330B"

From sigrok
Jump to navigation Jump to search
Line 46: Line 46:
| 0x01
| 0x01
| 0x81
| 0x81
| Configure device, 6 bytes payload:
| '''Configure device''', 6 bytes payload:


|-
|-
Line 82: Line 82:
| 0x02
| 0x02
| 0x82
| 0x82
| Identify, response payload is length byte + device model (ASCII)
| '''Identify''', response payload is length byte + device model (ASCII)


|-
|-
| 0x03
| 0x03
| 0x83
| 0x83
| Set date and time, 6 bytes payload:
| '''Set date and time''', 6 bytes payload:


|-
|-
Line 122: Line 122:
|-
|-
| 0x04
| 0x04
|
| '''Check status'''
|-
|
| 0x84
| 0x84
| Check status
|  
|-
|
| 0xa4
|


|-
|-
| 0x05
| 0x05
| 0x85
| 0x85
| Get stored measurement info, response has 8 bytes payload:
| '''Get stored measurement info''', response has 8 bytes payload:


|-
|-
Line 148: Line 156:
| 0x06
| 0x06
| 0x86
| 0x86
| Get stored start date/time. Response has 6 bytes payload, same format as 0x03 command.
| '''Get stored start date/time'''. Response has 6 bytes payload, same format as 0x03 command.


|-
|-
| 0x07
| 0x07
| 0x87
| 0x87
| Get stored measurements, 3 bytes payload:
| '''Get stored measurements''', 3 bytes payload:
|-
|-
|
|
Line 176: Line 184:
| 0x08
| 0x08
| 0x88
| 0x88
| Get live measurement, response has 2 bytes payload: big-endian integer representing the dB value X 10
| '''Get live measurement''', response has 2 bytes payload: big-endian integer representing the dB value X 10


|}
|}

Revision as of 09:40, 18 June 2013

Kecheng KC-330B
Kecheng KC-330B.png
Status in progress
Connectivity USB
Measurement range (A) 30dB - 130dB
Resolution 0.1dB
Accuracy (94dB@1kHz) 1.5dB
Frequency weighting A, C
Time weighting F, S

The Kecheng KC-330B is a sound level meter and data logger with USB connectivity.

See Kecheng KC-330B/Info for more details (such as lsusb -vvv output) about the device.

Hardware

Photos

  • Back of the device

  • PCB, top

  • PCB, bottom

  • PCB with LCD removed

  • SGM8522/SGM8524

  • Silicon Labs F320

Protocol

The host sends commands to the device via endpoint 2, and receives responses via endpoint 1. A command consists of a single byte, with the MSB (bit 7) cleared, followed by any arguments to the command. The response from the device consists of at least one byte: the command, with the MSB set.

Command Response Description
0x01 0x81 Configure device, 6 bytes payload:
1 Sample rate 0-6, representing 125ms, 500ms, 1s, 2s, 5s, 10s, 60s respectively.
2 Alarm low threshold
3 Alarm high threshold
4 Time weighting: 0=Fast, 1=Slow
5 Frequency weighting: 0=dBA, 1=dBC
6 Data source: 0=memory, 1=real time
0x02 0x82 Identify, response payload is length byte + device model (ASCII)
0x03 0x83 Set date and time, 6 bytes payload:
1 Last two digits of year, e.g. 0x0d for 2013
2 Month, 1-12
3 Day of month, 1-31
4 Hours
5 Minutes
6 Seconds
0x04 Check status
0x84
0xa4
0x05 0x85 Get stored measurement info, response has 8 bytes payload:
1-6 Configuration settings of acquired data, same format as 0x01 command (except 0x11...)
7-8 Big-endian integer representing number of stored measurements.
0x06 0x86 Get stored start date/time. Response has 6 bytes payload, same format as 0x03 command.
0x07 0x87 Get stored measurements, 3 bytes payload:
1 ?
2 ?
3 Number of samples to send.
0x08 0x88 Get live measurement, response has 2 bytes payload: big-endian integer representing the dB value X 10
Retrieved from "https://sigrok.org/w/index.php?title=Kecheng_KC-330B&oldid=6724"