Difference between revisions of "Kecheng KC-330B"
Jump to navigation
Jump to search
(→Photos) |
|||
| Line 35: | Line 35: | ||
== Protocol == | == Protocol == | ||
The host sends commands to the device via endpoint 2, and receives responses via endpoint 1. A command consists of a single byte, with the MSB (bit 7) cleared, followed by any arguments to the command. The response from the device consists of at least one byte: the command, with the MSB set. | |||
{| border="0" width="95%" class="alternategrey sigroktable" | |||
|- | |||
! Command | |||
! Response | |||
! Description | |||
|- | |||
| 0x02 | |||
| 0x82 + length byte + device model (ASCII) | |||
| Identify | |||
|- | |||
| 0x03 + 6 bytes configuration | |||
| 0x83 | |||
| Configure device | |||
|} | |||
[[Category:Device]] | [[Category:Device]] | ||
[[Category:Sound level meter]] | [[Category:Sound level meter]] | ||
[[Category:In progress]] | [[Category:In progress]] | ||
Revision as of 23:01, 17 June 2013
 | |
| Status | in progress |
|---|---|
| Connectivity | USB |
| Measurement range (A) | 30dB - 130dB |
| Resolution | 0.1dB |
| Accuracy (94dB@1kHz) | 1.5dB |
| Frequency weighting | A, C |
| Time weighting | F, S |
The Kecheng KC-330B is a sound level meter and data logger with USB connectivity.
See Kecheng KC-330B/Info for more details (such as lsusb -vvv output) about the device.
Hardware
- Silicon Labs F320 8-bit MCU with USB interface
- 2 X SG Micro SGM8522 dual rail-to-rail op-amp, SGM8524 quad rail-to-rail op-amp
- Microchip 24LC512 64KB EEPROM
- Texas Instruments CD4053M triple 2-channel multiplexer
Photos
Back of the device
PCB, top
PCB, bottom
PCB with LCD removed
SGM8522/SGM8524
Silicon Labs F320
Protocol
The host sends commands to the device via endpoint 2, and receives responses via endpoint 1. A command consists of a single byte, with the MSB (bit 7) cleared, followed by any arguments to the command. The response from the device consists of at least one byte: the command, with the MSB set.
| Command | Response | Description |
|---|---|---|
| 0x02 | 0x82 + length byte + device model (ASCII) | Identify |
| 0x03 + 6 bytes configuration | 0x83 | Configure device |