Difference between revisions of "MCU123 USBee AX Pro clone"
Jump to navigation
Jump to search
Uwe Hermann (talk | contribs) m |
|||
| Line 16: | Line 16: | ||
The '''USBee AX Pro clone''' is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate. | The '''USBee AX Pro clone''' is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate. | ||
It is a clone of the [[CWAV USBee AX-Pro]], but it doesn't have analog (only 8-channel digital) sampling capabilities | It is a clone of the [[CWAV USBee AX-Pro]], but it doesn't have analog (only 8-channel digital) sampling capabilities. | ||
In sigrok, we use the open-source [[fx2lafw]] firmware for this logic analyzer. | In sigrok, we use the open-source [[fx2lafw]] firmware for this logic analyzer. | ||
| Line 24: | Line 24: | ||
== Hardware == | == Hardware == | ||
* '''Main chip''': Cypress CY7C68013A-56PVXC ( | * '''Main chip''': Cypress CY7C68013A-56PVXC (FX2LP) | ||
* '''Input buffer''': NXP HC245 | * '''Input buffer''': NXP HC245 | ||
* '''I2C EEPROM''': | * '''256-byte I2C EEPROM''': Atmel AT24C02 (markings: "ATMEL218 24C02N SU27 D") | ||
* '''Low-dropout voltage regulator''': 3.3V AMS 1117 | * '''Low-dropout voltage regulator''': 3.3V AMS 1117 | ||
* '''24MHz crystal''': 24.000 | * '''24MHz crystal''': 24.000 | ||
| Line 33: | Line 33: | ||
<gallery> | <gallery> | ||
File:Usbee_ax_clone_front.png|<small> | File:Usbee_ax_clone_front.png|<small>Device, front</small> | ||
File:Usbee_ax_clone_angle.jpg|<small>Device, angle</small> | File:Usbee_ax_clone_angle.jpg|<small>Device, angle</small> | ||
File:Usbee_ax_clone_back.jpg|<small>Device, back</small> | File:Usbee_ax_clone_back.jpg|<small>Device, back</small> | ||
Revision as of 20:30, 11 January 2013
 | |
| Status | supported |
|---|---|
| Source code | fx2lafw |
| Channels | 8 |
| Samplerate | 24MHz |
| Samplerate (state) | — |
| Triggers | none (SW-only) |
| Min/max voltage | ? |
| Memory | none |
| Compression | none |
| Website | dx.com |
The USBee AX Pro clone is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.
It is a clone of the CWAV USBee AX-Pro, but it doesn't have analog (only 8-channel digital) sampling capabilities.
In sigrok, we use the open-source fx2lafw firmware for this logic analyzer.
See USBee AX Pro clone/Info for more detailed information on the device.
Hardware
- Main chip: Cypress CY7C68013A-56PVXC (FX2LP)
- Input buffer: NXP HC245
- 256-byte I2C EEPROM: Atmel AT24C02 (markings: "ATMEL218 24C02N SU27 D")
- Low-dropout voltage regulator: 3.3V AMS 1117
- 24MHz crystal: 24.000
Photos
Device, front
Device, angle
Device, back
Device, opened
PCB, front
PCB, back
Protocol
Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.