Difference between revisions of "XZL Studio DX"
Jump to navigation
Jump to search
Uwe Hermann (talk | contribs) m |
|||
| Line 1: | Line 1: | ||
{{Infobox logic analyzer | |||
| image = | |||
| name = XZL Studio DX | |||
| status = supported | |||
| source_code_dir = fx2lafw | |||
| channels = 8/16 | |||
| samplerate = 24MHz | |||
| samplerate_state = — | |||
| triggers = none (SW-only) | |||
| voltages = ? | |||
| memory = none | |||
| compression = none | |||
| website = [http://www.hotmcu.com/xzl-studio-dx-mixed-signal-oscilloscope-logic-analyzer-p-13.html hotmcu.com] | |||
}} | |||
The '''XZL Studio DX''' is a USB-based, 16-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels. | |||
It is a clone of the [[CWAV USBee DX]]. | It is a clone of the [[CWAV USBee DX]]. | ||
See [[XZL Studio DX/Info]] for more | In sigrok, we use the open-source [[fx2lafw]] firmware for this logic analyzer. | ||
'''Note''': Only the logic analyzer functionality is supported so far, analog support is work in progress. | |||
See [[XZL Studio DX/Info]] for some more details (such as '''lsusb -vvv''' output) on the device. | |||
== Hardware == | == Hardware == | ||
* Main chip: | * '''Main chip''': 2x Cypress CY7C68013A-56PVXC (FX2LP) | ||
* ADC: | * '''ADC''': 2x Texas Instruments TLC5510 (SO 24pin package) | ||
* I2C EEPROM: Atmel ATML H136 24C02C M Y, place for second EEPROM chip. | * '''I2C EEPROM''': Atmel ATML H136 24C02C M Y, place for second EEPROM chip. | ||
* USB 2.0 Hub: SMSC USB2512A (QFN 36-pin package) | * '''USB 2.0 Hub''': SMSC USB2512A (QFN 36-pin package) | ||
* Low-dropout voltage regulator: Advanced Monolithic Systems AMS1117-3.3 | * '''Low-dropout voltage regulator''': Advanced Monolithic Systems AMS1117-3.3 | ||
* 24MHz | * '''Crystal''': 24MHz | ||
* ... | * ... | ||
| Line 21: | Line 40: | ||
== Protocol == | == Protocol == | ||
Since we use the open-source [[fx2lafw]] firmware for this device, we don't need to know the protocol. | |||
== Resources == | == Resources == | ||
Revision as of 23:43, 16 December 2012
| Status | supported |
|---|---|
| Source code | fx2lafw |
| Channels | 8/16 |
| Samplerate | 24MHz |
| Samplerate (state) | — |
| Triggers | none (SW-only) |
| Min/max voltage | ? |
| Memory | none |
| Compression | none |
| Website | hotmcu.com |
The XZL Studio DX is a USB-based, 16-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.
It is a clone of the CWAV USBee DX.
In sigrok, we use the open-source fx2lafw firmware for this logic analyzer.
Note: Only the logic analyzer functionality is supported so far, analog support is work in progress.
See XZL Studio DX/Info for some more details (such as lsusb -vvv output) on the device.
Hardware
- Main chip: 2x Cypress CY7C68013A-56PVXC (FX2LP)
- ADC: 2x Texas Instruments TLC5510 (SO 24pin package)
- I2C EEPROM: Atmel ATML H136 24C02C M Y, place for second EEPROM chip.
- USB 2.0 Hub: SMSC USB2512A (QFN 36-pin package)
- Low-dropout voltage regulator: Advanced Monolithic Systems AMS1117-3.3
- Crystal: 24MHz
- ...
Photos
TODO.
Protocol
Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.
Resources
TODO.