Difference between revisions of "XZL Studio DX"
Jump to navigation
Jump to search
Uwe Hermann (talk | contribs) m |
|||
| Line 31: | Line 31: | ||
[[Category:Oscilloscope]] | [[Category:Oscilloscope]] | ||
[[Category:Mixed-signal oscilloscope]] | [[Category:Mixed-signal oscilloscope]] | ||
[[Category:Supported]] | |||
Revision as of 11:34, 11 November 2012
The XZL Studio DX is a USB-based, 16-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.
It is a clone of the CWAV USBee DX.
See XZL Studio DX/Info for more detailed information on the device.
Hardware
- Main chip: 2 x Cypress CY7C68013A-56PVXC (SSOP 56pin package)
- ADC: 2 x Texas Instruments TLC5510 (SO 24pin package)
- I2C EEPROM: Atmel ATML H136 24C02C M Y, place for second EEPROM chip.
- USB 2.0 Hub: SMSC USB2512A (QFN 36-pin package)
- Low-dropout voltage regulator: Advanced Monolithic Systems AMS1117-3.3
- 24MHz crystal
- ...
Photos
TODO.
Protocol
In sigrok, we use the open-source fx2lafw firmware for this logic analyzer, hence the vendor's protocol is not relevant for us.
Resources
TODO.