Difference between revisions of "Robomotic MiniLogic"
Jump to navigation
Jump to search
Uwe Hermann (talk | contribs) |
|||
| Line 28: | Line 28: | ||
See also [https://secure.flickr.com/photos/uwehermann/sets/72157629563753680/ this flickr set] for more photos of the device. | See also [https://secure.flickr.com/photos/uwehermann/sets/72157629563753680/ this flickr set] for more photos of the device. | ||
[[Category:Device]] | |||
[[Category:Logic analyzer]] | |||
Revision as of 12:23, 8 October 2012
The Robomotic MiniLogic is a cheap Cypress FX2-based 8-channel USB logic analyzer with a maximum samplerate of 24 MHz.
See Robomotic MiniLogic/Info for more detailed information on the device.
Hardware
- Main chip: Cypress CY7C68013A-56PVXC (FX2) (datasheet)
- Octal 3-state non-inverting buffer/line-driver/line-receiver: 74HC244A (TODO: vendor?)
- 1A low-dropout voltage regulator (3.3V): Advanced Monolithic Systems AMS1117-3.3 (datasheet)
- 2K I2C serial EEPROM: 2x Microchip 24LC02BI (datasheet)
- 64K I2C serial EEPROM: Microchip 24LC64I (datasheet)
Photos
Device, front
Device, back
PCB, front
PCB, back
Cypress FX2
74HC244A
AMS1117
2x Microchip 24LC02BI
Microchip 24LC64I
See also this flickr set for more photos of the device.