Difference between revisions of "Hantek DSO3254A"
Jump to navigation
Jump to search
(→Photo) |
Uwe Hermann (talk | contribs) |
||
| Line 1: | Line 1: | ||
{{Infobox logic analyzer | {{Infobox logic analyzer | ||
| image = [[File:DSO3254A.jpg|180px]] | | image = [[File:DSO3254A.jpg|180px]] | ||
| name = DSO3254A | | name = Hantek DSO3254A | ||
| status = planned | | status = planned | ||
| source_code_dir = | | source_code_dir = | ||
| channels = 4 analog, 16 digital | | channels = 4 analog, 16 digital | ||
| samplerate = 250MHz | | samplerate = 250MHz | ||
| samplerate_state = — | | samplerate_state = — | ||
| triggers = | | triggers = edge, pulse, video, slope, timeout, external | ||
| voltages = -0.5V — 400V | | voltages = -0.5V — 400V | ||
| memory = 128M | | memory = 128M | ||
| compression = none | | compression = none | ||
| website = [http://www.hantek.com hantek.com] | | website = [http://www.hantek.com/en/ProductDetail_2_134.html hantek.com] | ||
}} | }} | ||
The Hantek DSO3254A is a USB-based signal acquisition device. It has 4 analog | The '''Hantek DSO3254A''' is a USB-based signal acquisition device. It has 4 analog channels with 250MHz bandwidth and sampling rate of 1GSa/s. It comes with 16 channel logic analyzer with a maximum sampling rate of 250MHz and an arbritary waveform generator 200MSa/s. | ||
See [[Hantek DSO3254A/Info]] for more details (such as '''lsusb -v''' output) about the device. | |||
== Hardware == | == Hardware == | ||
== | * S3C2416XH-40 System Controller (400 MHz ARM926EJ with 48 MHz and 12 MHz oscillators with 32.768 kHz RTC oscillator) | ||
* D9SBJ System Memory (MT47H32M16NF-25E - 400 MHz 32MB x 16 DDR2-800) | |||
* D9RZH Acquisition Memory (MT47H64M16NF-25E - 400 MHz 64MB x 16 DDR2-800) | |||
* K9F1G08U0E 128MB x 8 NAND Flash | |||
* 24L64 I2C EEPROM | |||
* DM9000AEP LAN Controller | |||
* USB Wi-Fi Module (optional) | |||
* USB Hub (optional) | |||
* XC6SLX16FTG256 Control FPGA (under heatsink - has JTAG) | |||
* 1 GSPS 8-bit Quad ADC (under heatsink - Analog Devices?) | |||
* ADF4905 Timebase Generator PLL (with 10 MHz reference oscillator) | |||
* LTC2601 x2 (?) 12 Bit Offset DAC | |||
* DAC902E 165 MSPS 12 Bit Waveform Generator DAC | |||
* 74HC595 Channel Relay Switching (1 per channel) | |||
* 74HC595 Offset Voltage Switching | |||
* 74HC595 Trigger Source Selection | |||
* 74HC4051 Offset Voltage Switching | |||
== Photos == | |||
<gallery> | <gallery> | ||
File:DSO3254A_Front.jpg|<small>Device, front panel</small> | File:DSO3254A_Front.jpg|<small>Device, front panel</small> | ||
File:DSO3254A_Back.jpg|<small>Device, back panel</small> | File:DSO3254A_Back.jpg|<small>Device, back panel</small> | ||
File:DSO3254A_FrontPCB.jpg|<small> | File:DSO3254A_FrontPCB.jpg|<small>PCB, top</small> | ||
File:DSO3254A_BackPCB.jpg|<small> | File:DSO3254A_BackPCB.jpg|<small>PCB, bottom</small> | ||
File:DSO3254A_FrontEnd.jpg|<small> | File:DSO3254A_FrontEnd.jpg|<small>PCB, front end</small> | ||
</gallery> | </gallery> | ||
== Resources == | == Resources == | ||
[http://www.hantek.com/down.aspx?url=http%3a%2f%2fwww.hantek.com%2fProduct%2fDSO3000(A)%2fDSO3000(A)_SCPI_EN.pdf Vendor SDK] | * [http://www.hantek.com/down.aspx?url=http%3a%2f%2fwww.hantek.com%2fProduct%2fDSO3000(A)%2fDSO3000(A)_Manual_EN.pdf Manual] | ||
* [http://www.hantek.com/down.aspx?url=http%3a%2f%2fwww.hantek.com%2fProduct%2fDSO3000(A)%2fDSO3000A_Firmware.zip Vendor firmware] | |||
* [http://www.hantek.com/down.aspx?url=http%3a%2f%2fwww.hantek.com%2fProduct%2fDSO3000(A)%2fDSO3000(A)_SCPI_EN.pdf Vendor SDK] | |||
* [http://www.hantek.com/down.aspx?url=http%3a%2f%2fwww.hantek.com%2fProduct%2fDSO3000(A)%2fDSO3000A_Software.zip Vendor software] | |||
[ | [[Category:Device]] | ||
[[Category:Oscilloscope]] | |||
[[Category:Logic analyzer]] | |||
[[Category:Planned]] | |||
Revision as of 13:57, 27 November 2018
 | |
| Status | planned |
|---|---|
| Channels | 4 analog, 16 digital |
| Samplerate | 250MHz |
| Samplerate (state) | — |
| Triggers | edge, pulse, video, slope, timeout, external |
| Min/max voltage | -0.5V — 400V |
| Memory | 128M |
| Compression | none |
| Website | hantek.com |
The Hantek DSO3254A is a USB-based signal acquisition device. It has 4 analog channels with 250MHz bandwidth and sampling rate of 1GSa/s. It comes with 16 channel logic analyzer with a maximum sampling rate of 250MHz and an arbritary waveform generator 200MSa/s.
See Hantek DSO3254A/Info for more details (such as lsusb -v output) about the device.
Hardware
- S3C2416XH-40 System Controller (400 MHz ARM926EJ with 48 MHz and 12 MHz oscillators with 32.768 kHz RTC oscillator)
- D9SBJ System Memory (MT47H32M16NF-25E - 400 MHz 32MB x 16 DDR2-800)
- D9RZH Acquisition Memory (MT47H64M16NF-25E - 400 MHz 64MB x 16 DDR2-800)
- K9F1G08U0E 128MB x 8 NAND Flash
- 24L64 I2C EEPROM
- DM9000AEP LAN Controller
- USB Wi-Fi Module (optional)
- USB Hub (optional)
- XC6SLX16FTG256 Control FPGA (under heatsink - has JTAG)
- 1 GSPS 8-bit Quad ADC (under heatsink - Analog Devices?)
- ADF4905 Timebase Generator PLL (with 10 MHz reference oscillator)
- LTC2601 x2 (?) 12 Bit Offset DAC
- DAC902E 165 MSPS 12 Bit Waveform Generator DAC
- 74HC595 Channel Relay Switching (1 per channel)
- 74HC595 Offset Voltage Switching
- 74HC595 Trigger Source Selection
- 74HC4051 Offset Voltage Switching
Photos
Device, front panel
Device, back panel
PCB, top
PCB, bottom
PCB, front end
