Difference between revisions of "Saleae Logic8"
Jump to navigation
Jump to search
Uwe Hermann (talk | contribs) |
m |
||
(One intermediate revision by one other user not shown) | |||
Line 12: | Line 12: | ||
| memory = ? | | memory = ? | ||
| compression = yes | | compression = yes | ||
| price = $349 | |||
| website = [http://www.saleae.com/ saleae.com] | | website = [http://www.saleae.com/ saleae.com] | ||
}} | }} | ||
Line 44: | Line 45: | ||
File:Saleae_Logic8_board_bottom_upper_right.jpg|<small>PCB, bottom details</small> | File:Saleae_Logic8_board_bottom_upper_right.jpg|<small>PCB, bottom details</small> | ||
</gallery> | </gallery> | ||
== Resources == | == Resources == |
Latest revision as of 14:39, 30 June 2019
Status | planned |
---|---|
Channels | 3/6/7/8 |
Samplerate | 100/50/40/25 |
Samplerate (state) | — |
Triggers | none (SW-only) |
Min/max voltage | 1.8V — 5.5V |
Threshold voltage | VIH=1.2V, VIL=0.6V |
Memory | ? |
Compression | yes |
Price range | $349 |
Website | saleae.com |
The Saleae Logic8 is a USB-based, 8-channel logic analyzer with 100/50/40/25MHz sampling rate (at 3/6/7/8 enabled channels).
The case requires a Torx T7 screwdriver to open.
See Saleae Logic8/Info for more details (such as lsusb -v output) about the device.
Hardware
These are provisional guesses, please correct if you spot errors, they are surely there.
- FPGA: XILINIX Spartan-6 XC6SLX9 CSG225BIV1425 Spartan-6 Family Overview
- USB interface chip: Cypress CY7C66013A-56LTXC datasheet
- TI SN74LVC245A 5.5V tolerant octal bus transceiver
- Acquisition signal processing: 6x Analog Devices ADA4891-4 quad amplifier
- ADC: Hittite Microwave HMCAD1100 (datasheet)
- Unknown function: MNAB / F26A
- This list not yet complete (EEPROM? Voltage regulation?)