Difference between revisions of "Protocol decoder:Stepper motor"
Jump to navigation
Jump to search
Uwe Hermann (talk | contribs) |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 2: | Line 2: | ||
| id = stepper_motor | | id = stepper_motor | ||
| name = Stepper motor | | name = Stepper motor | ||
| description = | | description = Absolute position and movement speed from step/dir | ||
| status = supported | | status = supported | ||
| license = GPLv2+ | | license = GPLv2+ | ||
| source_code_dir = stepper_motor | | source_code_dir = stepper_motor | ||
| image = | | image = [[File:Stepper_motor.png|250px]] | ||
| input = logic | | input = logic | ||
| output = stepper_motor | | output = stepper_motor | ||
| probes = | | probes = Step, Direction | ||
| optional_probes = | | optional_probes = | ||
| options = unit, steps_per_mm | | options = unit, steps_per_mm | ||
}} | }} | ||
The stepper_motor protocol decoder decodes step and direction signals, and gives the actuator position and speed | The '''stepper_motor''' protocol decoder decodes step and direction signals, and gives the actuator position and speed. | ||
It is designed for linear actuators, such as used in 3D printers. | |||
[[ | The unit can be selected as either steps or millimeters. | ||
== Resources == | |||
* [https://en.wikipedia.org/wiki/Stepper_motor Wikipedia: Stepper motor] | |||
[[Category:Protocol decoder]] | |||
Latest revision as of 22:27, 2 April 2015
 | |
| Name | Stepper motor |
|---|---|
| Description | Absolute position and movement speed from step/dir |
| Status | supported |
| License | GPLv2+ |
| Source code | decoders/stepper_motor |
| Input | logic |
| Output | stepper_motor |
| Probes | Step, Direction |
| Options | unit, steps_per_mm |
The stepper_motor protocol decoder decodes step and direction signals, and gives the actuator position and speed.
It is designed for linear actuators, such as used in 3D printers.
The unit can be selected as either steps or millimeters.