Difference between revisions of "Hantek DSO-2090"
Jump to navigation
Jump to search
Uwe Hermann (talk | contribs) m |
|||
| Line 5: | Line 5: | ||
See [[Hantek DSO-2090/Info]] for more details (such as '''lsusb -vvv''' output) about the device. | See [[Hantek DSO-2090/Info]] for more details (such as '''lsusb -vvv''' output) about the device. | ||
For more information about the devices in Hantek's USB oscilloscope | For more information about the devices in Hantek's USB oscilloscope series, see [[Hantek DSO-2xxx/52xx]]. | ||
== Hardware == | == Hardware == | ||
Revision as of 22:40, 12 March 2013
The Hantek DSO-2090 is an inexpensive USB-based oscilloscope. It has 2 channels, an analog bandwidth of 40MHz and 100MS/s sampling rate.
See Hantek DSO-2090/Info for more details (such as lsusb -vvv output) about the device.
For more information about the devices in Hantek's USB oscilloscope series, see Hantek DSO-2xxx/52xx.
Hardware
- Xilinx XC95288XL CPLD
- 50 MHz oscillator
- 2 x ISSI IS61LV256 (32K SRAM)
- 2 x HEF4052B (dual 4-channel analog mux/demux)
- Cypress CY7C68013a (FX2)
- Microchip 24LC02B (2K EEPROM for the FX2)
- Calogic SST5912 (N-Channel Monolithic JFET)
Input stage:
Per channel:
- HEF4052B (dual 4-channel analog mux/demux)
- Calogic SST5912 (N-Channel Monolithic JFET)
- 3 x Forward Relay PL-5 (relays)
Photos
Hantek DSO-2090
Probe connectors
USB and calibration points
PCB
PCB back
Xilinx CPLD
Analog mux/demux
JFET switch
Cypress FX2 USB interface
FX2 EEPROM
Mux 2
RAM
Input stage
Protocol
See Hantek_DSO-2xxx/52xx#Protocol.
Extracting the firmware
See Hantek_DSO-2xxx/52xx#Extracting_the_firmware.
Resources
TODO.