Difference between revisions of "PulseView"
Jump to navigation
Jump to search
m (→Bootstrap) |
|||
| Line 27: | Line 27: | ||
=== Ubuntu === | === Ubuntu === | ||
==== Prerequisites ==== | ==== Prerequisites ==== | ||
* You first need to build and install the libsigrok and libsigrokdecode from my git | * You first need to build and install the libsigrok and libsigrokdecode from my git repository. The last release of sigrok will not work, nor will the mainline head build. | ||
* You will also need to install boost and cmake with the following command: | * You will also need to install boost and cmake with the following command: | ||
$ sudo apt-get install cmake libboost-dev libboost-test-dev | $ sudo apt-get install cmake libboost-dev libboost-test-dev | ||
Revision as of 14:20, 8 October 2012
PulseView is a Qt based logic analyzer GUI for sigrok.
Features
- Fast O(log N) signal rendering at all zoom levels.
Download
git clone git://sigrok.org/pulseview.git
Requirements
- git
- g++
- make
- cmake >= 2.6
- libtool
- pkg-config >= 0.22
- libglib >= 2.28.0
- Qt >= 4.x
- libsigrok >= 0.2.0
- libboost >= 1.4.6
- libboost-test >= 1.4.6 (Boost unit test lib)
Building
Ubuntu
Prerequisites
- You first need to build and install the libsigrok and libsigrokdecode from my git repository. The last release of sigrok will not work, nor will the mainline head build.
- You will also need to install boost and cmake with the following command:
$ sudo apt-get install cmake libboost-dev libboost-test-dev
Bootstrap
$ cmake .
- Use
PKG_CONFIG_PATH=/<prefix-of-libsigrok-installation>/lib/pkgconfig/if libsigrok and libsigrokdecode are installed to a non-standard prefix. - To make a non-stripped debug build
cmake -DCMAKE_BUILD_TYPE=Debug .
Build
$ make
make VERBOSE=1to show compiler arguments.
Test
$ ./pulseview