]>
Commit | Line | Data |
---|---|---|
2e895291 GM |
1 | ------------------------------------------------------------------------------- |
2 | Lisa/M USB HID example (USB Full-Speed and SPI) | |
3 | ------------------------------------------------------------------------------- | |
4 | ||
5 | This capture is taken from the libopencm3 example for a USB HID device on the | |
6 | Paparazzi Lisa/M board. In this applicaton an SPI accellerometer is read and | |
7 | the values are transmitted on a USB IN endpoint as mouse movement. | |
8 | ||
9 | Logic Analyser setup | |
10 | -------------------- | |
11 | ||
12 | The capture was taken using the Openbench Logic Sniffer at a sample rate | |
13 | of 50MHz. | |
14 | ||
15 | Probe Signal | |
16 | ------------------- | |
17 | 0 USB_DM | |
18 | 1 USB_DP | |
19 | 2 SPI_NCS | |
20 | 3 SPI_SCK | |
21 | 4 SPI_MOSI | |
22 | 5 SPI_MISO | |
23 | ||
24 | The command line used was: | |
25 | ||
26 | sigrok-cli -d 0:samplerate=50mhz:rle=on \ | |
27 | -p 1=USB_DM,2=USB_DP,3=SPI_NCS,4=SPI_SCK,5=SPI_MOSI,6=SPI_MISO \ | |
28 | --time=50ms -o lisa_m_usb_spi.sr | |
29 | ||
30 | The OLS can't actually capture 50ms, so it just captures as much as it can | |
31 | buffer. No triggering was used. | |
32 |