projects / sigrok-dumps.git / blame
| Commit | Line | Data |
|---|---|---|
| 226c5e95 UH |
1 | ------------------------------------------------------------------------------- |
| 2 | SWD / ST-LINK/V2 / STM32F429ZIT6 | |
| 3 | ------------------------------------------------------------------------------- | |
| 4 | ||
| 5 | This is a set of example captures of SWD communication of an ST-LINK/V2 to | |
| 6 | an ST STM32F429ZIT6 (ARM Cortex-M4F) microcontroller. | |
| 7 | ||
| 8 | Details: | |
| 9 | http://www.st.com/web/catalog/tools/FM146/CL1984/SC724/SS1677/PF251168 | |
| 10 | ||
| 11 | ||
| 12 | Logic analyzer setup | |
| 13 | -------------------- | |
| 14 | ||
| 15 | The logic analyzer used was a USBee SX (at 8MHz): | |
| 16 | ||
| 17 | Probe SWD | |
| 18 | --------------- | |
| 19 | 0 (black) SWDIO | |
| 20 | 1 (brown) SWCLK | |
| 21 | 2 (red) SWO | |
| 22 | 3 (orange) RESET# | |
| 23 | ||
| 24 | ||
| 25 | Data | |
| 26 | ---- | |
| 27 | ||
| 28 | The following data is displayed by the ST-LINK/V2 Windows utility: | |
| 29 | ||
| 30 | Device: STM32F42xx/F43xx | |
| 31 | Device ID: 0x419 | |
| 32 | Revision ID: Rev 1 | |
| 33 | Flash size: 2MB | |
| 34 | ||
| 35 | STM32 ST-LINK Utility.exe v3.4.0 | |
| 36 | STLinkUSBDriver.dll v4.3.3.0 | |
| 37 | ST-LINK_CLI.exe v2.0.0 | |
| 38 | ||
| 39 | Old ST-LINK firmware/ST-LINK already used | |
| 40 | Firmware info: V2J17S4 (needs update) | |
| 41 | Supply voltage: 3.2V | |
| 42 | STM32 target info: STM32F42xx/F43xx | |
| 43 | Mode: normal, enable debug in low-power mode | |
| 44 |