manpage: Break line that's too long.

[sigrok-cli.git] / doc / sigrok-cli.1

diff --git a/doc/sigrok-cli.1 b/doc/sigrok-cli.1
index 497c3179abc36ee93237d74b34c1f4e5044015fb..d5b59ca4492d862e28ebb1b34f229ef2554ed63c 100644 (file)
--- a/doc/sigrok-cli.1
+++ b/doc/sigrok-cli.1
@@ -1,4 +1,4 @@
-.TH SIGROK\-CLI 1 "Feb 05, 2013"
+.TH SIGROK\-CLI 1 "Jan 31, 2014"
 .SH "NAME"
 sigrok\-cli \- Command-line client for the sigrok software
 .SH "SYNOPSIS"
@@ -169,6 +169,13 @@ for probes 5 and 6 will be reset to the defaults by the
 .B "1\-8"
 probe selection.
 .TP
+.BR "\-g, \-\-probe\-group "<probe\ group>
+Specify the probe group to operate on.
+
+Some devices organize probes into groups, the settings of which can
+only be changed as a group. The list of probe groups, if any, is displayed
+with the \-\-show command.
+.TP
 .BR "\-t, \-\-triggers " <triggerlist>
 A comma-separated list of triggers to use, of the form
 .BR "<probe>=<trigger>" .
@@ -216,7 +223,9 @@ of options, where each option takes the form
 Example:
 .sp
  $
-.B "sigrok\-cli \-i <file.sr> \-P uart:baudrate=115200:parity=odd"
+.B "sigrok\-cli \-i <file.sr> "
+.br
+.B "              \-P uart:baudrate=115200:parity_type=odd"
 .sp
 The list of supported options depends entirely on the protocol decoder. Every
 protocol decoder has different options it supports.
@@ -399,10 +408,11 @@ will acquire 3000000 samples.
 Sample continuously until stopped. Not all devices support this.
 .TP
 .BR "\-\-set"
-Set one or more variables specified with the \fB--config\fP option, without doing
-any acquisition.
+Set one or more variables specified with the \fB\-\-config\fP option, without
+doing any acquisition.
 .SH EXAMPLES
-In order to get exactly 100 samples from the connected fx2lafw-supported logic analyzer hardware, run the following command:
+In order to get exactly 100 samples from the connected fx2lafw-supported logic
+analyzer hardware, run the following command:
 .TP
 .B "  sigrok\-cli \-\-driver fx2lafw \-\-samples 100"
 .TP
@@ -425,7 +435,7 @@ To capture data from the first 4 probes using the Openbench Logic Sniffer lastin
 To turn on internal logging on a Lascar EL-USB series device:
 .TP
 \fBsigrok\-cli \-\-driver lascar\-el\-usb:conn=10c4.0002 \\\fP
-\fB\-\-config datalog=on --set\fP
+\fB\-\-config datalog=on \-\-set\fP
 .SH "EXIT STATUS"
 .B sigrok\-cli
 exits with 0 on success, 1 on most failures.