const QColor LogicSignal::LowColor(0xC0, 0x00, 0x00);
const QColor LogicSignal::SamplingPointColor(0x77, 0x77, 0x77);
-const QColor LogicSignal::SignalColors[10] = {
- QColor(0x16, 0x19, 0x1A), // Black
- QColor(0x8F, 0x52, 0x02), // Brown
- QColor(0xCC, 0x00, 0x00), // Red
- QColor(0xF5, 0x79, 0x00), // Orange
- QColor(0xED, 0xD4, 0x00), // Yellow
- QColor(0x73, 0xD2, 0x16), // Green
- QColor(0x34, 0x65, 0xA4), // Blue
- QColor(0x75, 0x50, 0x7B), // Violet
- QColor(0x88, 0x8A, 0x85), // Grey
- QColor(0xEE, 0xEE, 0xEC), // White
-};
-
QColor LogicSignal::TriggerMarkerBackgroundColor = QColor(0xED, 0xD4, 0x00);
const int LogicSignal::TriggerMarkerPadding = 2;
const char* LogicSignal::TriggerMarkerIcons[8] = {
QCache<QString, const QIcon> LogicSignal::icon_cache_;
QCache<QString, const QPixmap> LogicSignal::pixmap_cache_;
-LogicSignal::LogicSignal(
- pv::Session &session,
- shared_ptr<devices::Device> device,
- shared_ptr<data::SignalBase> base) :
+LogicSignal::LogicSignal(pv::Session &session, shared_ptr<data::SignalBase> base) :
Signal(session, base),
- device_(device),
trigger_types_(get_trigger_types()),
trigger_none_(nullptr),
trigger_rising_(nullptr),
trigger_low_(nullptr),
trigger_change_(nullptr)
{
- shared_ptr<Trigger> trigger;
-
- base_->set_color(SignalColors[base->index() % countof(SignalColors)]);
+ GlobalSettings settings;
+ signal_height_ = settings.value(GlobalSettings::Key_View_DefaultLogicHeight).toInt();
+ show_sampling_points_ =
+ settings.value(GlobalSettings::Key_View_ShowSamplingPoints).toBool();
+ fill_high_areas_ =
+ settings.value(GlobalSettings::Key_View_FillSignalHighAreas).toBool();
+ high_fill_color_ = QColor::fromRgba(settings.value(
+ GlobalSettings::Key_View_FillSignalHighAreaColor).value<uint32_t>());
- GlobalSettings gs;
- signal_height_ = gs.value(GlobalSettings::Key_View_DefaultLogicHeight).toInt();
+ update_logic_level_offsets();
/* Populate this channel's trigger setting with whatever we
* find in the current session trigger, if anything. */
trigger_match_ = nullptr;
- if ((trigger = session_.session()->trigger()))
+ if (shared_ptr<Trigger> trigger = session_.session()->trigger())
for (auto stage : trigger->stages())
for (auto match : stage->matches())
if (match->channel() == base_->channel())
trigger_match_ = match->type();
}
-shared_ptr<pv::data::SignalData> LogicSignal::data() const
+std::map<QString, QVariant> LogicSignal::save_settings() const
{
- return base_->logic_data();
-}
+ std::map<QString, QVariant> result;
-shared_ptr<pv::data::Logic> LogicSignal::logic_data() const
-{
- return base_->logic_data();
-}
+ result["trace_height"] = signal_height_;
-void LogicSignal::save_settings(QSettings &settings) const
-{
- settings.setValue("trace_height", signal_height_);
+ return result;
}
-void LogicSignal::restore_settings(QSettings &settings)
+void LogicSignal::restore_settings(std::map<QString, QVariant> settings)
{
- if (settings.contains("trace_height")) {
+ auto entry = settings.find("trace_height");
+ if (entry != settings.end()) {
const int old_height = signal_height_;
- signal_height_ = settings.value("trace_height").toInt();
+ signal_height_ = settings["trace_height"].toInt();
if ((signal_height_ != old_height) && owner_) {
+ update_logic_level_offsets();
+
// Call order is important, otherwise the lazy event handler won't work
owner_->extents_changed(false, true);
owner_->row_item_appearance_changed(false, true);
if (!base_->enabled())
return;
- const float low_offset = y + 0.5f;
- const float high_offset = low_offset - signal_height_;
+ const float low_offset = y + low_level_offset_;
+ const float high_offset = y + high_level_offset_;
+ const float fill_height = low_offset - high_offset;
shared_ptr<LogicSegment> segment = get_logic_segment_to_paint();
if (!segment || (segment->get_sample_count() == 0))
(int64_t)0), last_sample);
segment->get_subsampled_edges(edges, start_sample, end_sample,
- samples_per_pixel / Oversampling, base_->index());
+ samples_per_pixel / Oversampling, base_->logic_bit_index());
assert(edges.size() >= 2);
const float first_sample_x =
pp.left() + (edges.back().first / samples_per_pixel - pixels_offset);
// Check whether we need to paint the sampling points
- GlobalSettings settings;
- const bool show_sampling_points =
- settings.value(GlobalSettings::Key_View_ShowSamplingPoints).toBool() &&
- (samples_per_pixel < 0.25);
-
+ const bool show_sampling_points = show_sampling_points_ && (samples_per_pixel < 0.25);
vector<QRectF> sampling_points;
float sampling_point_x = first_sample_x;
int64_t sampling_point_sample = start_sample;
if (show_sampling_points)
sampling_points.reserve(end_sample - start_sample + 1);
- // Check whether we need to fill the high areas
- const bool fill_high_areas =
- settings.value(GlobalSettings::Key_View_FillSignalHighAreas).toBool();
vector<QRectF> high_rects;
float rising_edge_x;
bool rising_edge_seen = false;
const float x = pp.left() + ((*i).first / samples_per_pixel - pixels_offset);
*line++ = QLineF(x, high_offset, x, low_offset);
- if (fill_high_areas) {
+ if (fill_high_areas_) {
// Any edge terminates a high area
if (rising_edge_seen) {
const int width = x - rising_edge_x;
if (width > 0)
- high_rects.emplace_back(rising_edge_x, high_offset,
- width, signal_height_);
+ high_rects.emplace_back(rising_edge_x, high_offset, width, fill_height);
rising_edge_seen = false;
}
sampling_point_x += pixels_per_sample;
};
- if (fill_high_areas) {
+ if (fill_high_areas_) {
// Add last high rectangle if the signal is still high at the end of the trace
if (rising_edge_seen && (edges.cend() - 1)->second)
high_rects.emplace_back(rising_edge_x, high_offset,
last_sample_x - rising_edge_x, signal_height_);
- const QColor fill_color = QColor::fromRgba(settings.value(
- GlobalSettings::Key_View_FillSignalHighAreaColor).value<uint32_t>());
- p.setPen(fill_color);
- p.setBrush(fill_color);
+ p.setPen(high_fill_color_);
+ p.setBrush(high_fill_color_);
p.drawRects((const QRectF*)(high_rects.data()), high_rects.size());
}
base_->logic_data()->logic_segments();
if (!segments.empty()) {
- if (segment_display_mode_ == ShowLastSegmentOnly) {
+ if (segment_display_mode_ == ShowLastSegmentOnly)
segment = segments.back();
- }
- if ((segment_display_mode_ == ShowSingleSegmentOnly) ||
- (segment_display_mode_ == ShowLastCompleteSegmentOnly)) {
+ if ((segment_display_mode_ == ShowSingleSegmentOnly) ||
+ (segment_display_mode_ == ShowLastCompleteSegmentOnly)) {
try {
segment = segments.at(current_segment_);
} catch (out_of_range&) {
const vector<int32_t> LogicSignal::get_trigger_types() const
{
// We may not be associated with a device
- if (!device_)
+ if (!session_.device())
return vector<int32_t>();
- const auto sr_dev = device_->device();
+ const auto sr_dev = session_.device()->device();
if (sr_dev->config_check(ConfigKey::TRIGGER_MATCH, Capability::LIST)) {
const Glib::VariantContainerBase gvar =
sr_dev->config_list(ConfigKey::TRIGGER_MATCH);
// Only allow triggers to be changed when we're stopped
if (session_.get_capture_state() != Session::Stopped)
- for (QAction* action : trigger_bar_->findChildren<QAction*>())
+ for (QAction* action : trigger_bar_->findChildren<QAction*>()) // clazy:exclude=range-loop
action->setEnabled(false);
form->addRow(tr("Trigger"), trigger_bar_);
return pixmap_cache_.take(path);
}
+void LogicSignal::update_logic_level_offsets()
+{
+ low_level_offset_ = 0.5f;
+ high_level_offset_ = low_level_offset_ - signal_height_;
+}
+
+void LogicSignal::on_setting_changed(const QString &key, const QVariant &value)
+{
+ Signal::on_setting_changed(key, value);
+
+ if (key == GlobalSettings::Key_View_ShowSamplingPoints)
+ show_sampling_points_ = value.toBool();
+
+ if (key == GlobalSettings::Key_View_FillSignalHighAreas)
+ fill_high_areas_ = value.toBool();
+
+ if (key == GlobalSettings::Key_View_FillSignalHighAreaColor)
+ high_fill_color_ = QColor::fromRgba(value.value<uint32_t>());
+}
+
void LogicSignal::on_trigger()
{
QAction *action;
signal_height_ = height;
if (owner_) {
+ update_logic_level_offsets();
+
// Call order is important, otherwise the lazy event handler won't work
owner_->extents_changed(false, true);
owner_->row_item_appearance_changed(false, true);
projects / pulseview.git / blobdiff