Don't use AUTORCC, this would require cmake >= 3.0.

[pulseview.git] / doc / pulseview.1

diff --git a/doc/pulseview.1 b/doc/pulseview.1
index b830f08cdae9f01104f539da497046876d4fa9fa..936fe8ac6d453384a96c1dedbea1a9f3d75e3174 100644 (file)
--- a/doc/pulseview.1
+++ b/doc/pulseview.1
@@ -1,8 +1,8 @@
-.TH PULSEVIEW 1 "May 4, 2013"
+.TH PULSEVIEW 1 "March 4, 2017"

 .SH "NAME"
 PulseView \- Qt-based LA/scope/MSO GUI for sigrok
 .SH "SYNOPSIS"
 .SH "NAME"
 PulseView \- Qt-based LA/scope/MSO GUI for sigrok
 .SH "SYNOPSIS"

-.B pulseview \fR[\fB\-lh?V\fR] [\fB\-l\fR|\fB\-\-loglevel\fR] [\fB\-h\fR|\fB\-?\fR|\fB\-\-help\fR] [\fB\-V\fR|\fB\-\-version\fR] [\fBfile.sr\fR]
+.B pulseview \fR[\fBOPTIONS\fR] [\fBfile.sr\fR]

 .SH "DESCRIPTION"
 .B PulseView
 is a cross-platform Qt-based GUI for the
 .SH "DESCRIPTION"
 .B PulseView
 is a cross-platform Qt-based GUI for the


@@ -15,7 +15,7 @@ has very few command line options, as most configuration elements are
 available from the GUI itself.
 .sp
 If the optional \fBfile.sr\fR argument is supplied, PulseView tries to open
 available from the GUI itself.
 .sp
 If the optional \fBfile.sr\fR argument is supplied, PulseView tries to open

-the specified file. It has to be in the "libsigrok session" format.
+the specified file. It has to be in the "libsigrok session" format (.sr).

 .TP
 .B "\-l, \-\-loglevel"
 Set the libsigrok and libsigrokdecode loglevel. At the moment PulseView
 .TP
 .B "\-l, \-\-loglevel"
 Set the libsigrok and libsigrokdecode loglevel. At the moment PulseView


@@ -39,6 +39,71 @@ Show a help text and exit.
 .TP
 .B "\-V, \-\-version"
 Show version information and exit.
 .TP
 .B "\-V, \-\-version"
 Show version information and exit.

+.TP
+.BR "\-i, \-\-input\-file " <filename>
+Load input from a file. If the
+.B \-\-input\-format
+option is not supplied, PulseView attempts to load the file as a sigrok session
+file.
+.TP
+.BR "\-I, \-\-input\-format " <format>
+Specifies the format of the input file to be loaded.
+.SH "KEYBOARD SHORTCUTS"
+.TP
+.B "f"
+Zoom-to-fit.
+.TP
+.B "o"
+Zoom 1:1.
+.TP
+.B "s"
+Enable / disable sticky scrolling.
+.TP
+.B "."
+Show / hide sampling points.
+.TP
+.B "g"
+Show / hide analog minor grid (in addition to the vdiv grid).
+.TP
+.B "c"
+Show / hide cursors.
+.TP
+.B "b"
+Toggle between coloured trace backgrounds and alternating light/dark
+gray trace backgrounds.
+.TP
+.B "SPACE"
+Start / stop an acquisition.
+.TP
+.B "Arrow keys"
+Scroll up/down/left/right.
+.TP
+.B "CTRL+o"
+Open file.
+.TP
+.B "CTRL+s"
+Save as...
+.TP
+.B "CTRL+r"
+Save selected range as...
+.TP
+.B "CTRL+g"
+Group all currently selected traces into a trace group.
+.TP
+.B "CTRL+u"
+Ungroup the traces in the currently selected trace group.
+.TP
+.B "CTRL++"
+Zoom in.
+.TP
+.B "CTRL+-"
+Zoom out.
+.TP
+.B "CTRL+q"
+Quit, i.e. shutdown PulseView (closing all session tabs).
+.TP
+.B "CTRL+w"
+Close the current session tab.

 .SH "EXIT STATUS"
 .B PulseView
 exits with 0 on success, 1 on most failures.
 .SH "EXIT STATUS"
 .B PulseView
 exits with 0 on success, 1 on most failures.