Annotation: Use special type for the class, not plain int

[pulseview.git] / pv / views / trace / analogsignal.cpp

/*
 * This file is part of the PulseView project.
 *
 * Copyright (C) 2012 Joel Holdsworth <joel@airwebreathe.org.uk>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, see <http://www.gnu.org/licenses/>.
 */

#include <extdef.h>

#include <cassert>
#include <cmath>
#include <cstdlib>
#include <limits>
#include <vector>

#include <QApplication>
#include <QCheckBox>
#include <QComboBox>
#include <QDebug>
#include <QFormLayout>
#include <QGridLayout>
#include <QLabel>
#include <QString>

#include "analogsignal.hpp"
#include "logicsignal.hpp"
#include "view.hpp"

#include "pv/data/analog.hpp"
#include "pv/data/analogsegment.hpp"
#include "pv/data/logic.hpp"
#include "pv/data/logicsegment.hpp"
#include "pv/data/signalbase.hpp"
#include "pv/globalsettings.hpp"

#include <libsigrokcxx/libsigrokcxx.hpp>

using std::deque;
using std::div;
using std::div_t;
using std::max;
using std::make_pair;
using std::min;
using std::numeric_limits;
using std::out_of_range;
using std::pair;
using std::shared_ptr;
using std::vector;

using pv::data::SignalBase;

namespace pv {
namespace views {
namespace trace {

const QColor AnalogSignal::SignalColors[4] = {
	QColor(0xC4, 0xA0, 0x00),	// Yellow
	QColor(0x87, 0x20, 0x7A),	// Magenta
	QColor(0x20, 0x4A, 0x87),	// Blue
	QColor(0x4E, 0x9A, 0x06)	// Green
};

const QPen AnalogSignal::AxisPen(QColor(0, 0, 0, 30 * 256 / 100), 2);
const QColor AnalogSignal::GridMajorColor = QColor(0, 0, 0, 40 * 256 / 100);
const QColor AnalogSignal::GridMinorColor = QColor(0, 0, 0, 20 * 256 / 100);

const QColor AnalogSignal::SamplingPointColor(0x77, 0x77, 0x77);
const QColor AnalogSignal::SamplingPointColorLo = QColor(200, 0, 0, 80 * 256 / 100);
const QColor AnalogSignal::SamplingPointColorNe = QColor(0,   0, 0, 80 * 256 / 100);
const QColor AnalogSignal::SamplingPointColorHi = QColor(0, 200, 0, 80 * 256 / 100);

const QColor AnalogSignal::ThresholdColor = QColor(0, 0, 0, 30 * 256 / 100);
const QColor AnalogSignal::ThresholdColorLo = QColor(255, 0, 0, 8 * 256 / 100);
const QColor AnalogSignal::ThresholdColorNe = QColor(0,   0, 0, 10 * 256 / 100);
const QColor AnalogSignal::ThresholdColorHi = QColor(0, 255, 0, 8 * 256 / 100);

const int64_t AnalogSignal::TracePaintBlockSize = 1024 * 1024;  // 4 MiB (due to float)
const float AnalogSignal::EnvelopeThreshold = 64.0f;

const int AnalogSignal::MaximumVDivs = 10;
const int AnalogSignal::MinScaleIndex = -6;
const int AnalogSignal::MaxScaleIndex = 7;

const int AnalogSignal::InfoTextMarginRight = 20;
const int AnalogSignal::InfoTextMarginBottom = 5;

AnalogSignal::AnalogSignal(
	pv::Session &session,
	shared_ptr<data::SignalBase> base) :
	Signal(session, base),
	scale_index_(4), // 20 per div
	scale_index_drag_offset_(0),
	pos_vdivs_(1),
	neg_vdivs_(1),
	resolution_(0),
	display_type_(DisplayBoth),
	autoranging_(true)
{
	axis_pen_ = AxisPen;

	pv::data::Analog* analog_data =
		dynamic_cast<pv::data::Analog*>(data().get());

	connect(analog_data, SIGNAL(min_max_changed(float, float)),
		this, SLOT(on_min_max_changed(float, float)));

	GlobalSettings::add_change_handler(this);

	GlobalSettings gs;
	conversion_threshold_disp_mode_ =
		gs.value(GlobalSettings::Key_View_ConversionThresholdDispMode).toInt();

	div_height_ = gs.value(GlobalSettings::Key_View_DefaultDivHeight).toInt();

	base_->set_color(SignalColors[base_->index() % countof(SignalColors)]);
	update_scale();
}

AnalogSignal::~AnalogSignal()
{
	GlobalSettings::remove_change_handler(this);
}

shared_ptr<pv::data::SignalData> AnalogSignal::data() const
{
	return base_->analog_data();
}

void AnalogSignal::save_settings(QSettings &settings) const
{
	settings.setValue("pos_vdivs", pos_vdivs_);
	settings.setValue("neg_vdivs", neg_vdivs_);
	settings.setValue("scale_index", scale_index_);
	settings.setValue("display_type", display_type_);
	settings.setValue("autoranging", autoranging_);
	settings.setValue("div_height", div_height_);
}

void AnalogSignal::restore_settings(QSettings &settings)
{
	if (settings.contains("pos_vdivs"))
		pos_vdivs_ = settings.value("pos_vdivs").toInt();

	if (settings.contains("neg_vdivs"))
		neg_vdivs_ = settings.value("neg_vdivs").toInt();

	if (settings.contains("scale_index")) {
		scale_index_ = settings.value("scale_index").toInt();
		update_scale();
	}

	if (settings.contains("display_type"))
		display_type_ = (DisplayType)(settings.value("display_type").toInt());

	if (settings.contains("autoranging"))
		autoranging_ = settings.value("autoranging").toBool();

	if (settings.contains("div_height")) {
		const int old_height = div_height_;
		div_height_ = settings.value("div_height").toInt();

		if ((div_height_ != old_height) && owner_) {
			// Call order is important, otherwise the lazy event handler won't work
			owner_->extents_changed(false, true);
			owner_->row_item_appearance_changed(false, true);
		}
	}
}

pair<int, int> AnalogSignal::v_extents() const
{
	const int ph = pos_vdivs_ * div_height_;
	const int nh = neg_vdivs_ * div_height_;
	return make_pair(-ph, nh);
}

int AnalogSignal::scale_handle_offset() const
{
	const int h = (pos_vdivs_ + neg_vdivs_) * div_height_;

	return ((scale_index_drag_offset_ - scale_index_) * h / 4) - h / 2;
}

void AnalogSignal::scale_handle_dragged(int offset)
{
	const int h = (pos_vdivs_ + neg_vdivs_) * div_height_;

	scale_index_ = scale_index_drag_offset_ - (offset + h / 2) / (h / 4);

	update_scale();
}

void AnalogSignal::scale_handle_drag_release()
{
	scale_index_drag_offset_ = scale_index_;
	update_scale();
}

void AnalogSignal::on_setting_changed(const QString &key, const QVariant &value)
{
	if (key == GlobalSettings::Key_View_ConversionThresholdDispMode)
		on_settingViewConversionThresholdDispMode_changed(value);
}

void AnalogSignal::paint_back(QPainter &p, ViewItemPaintParams &pp)
{
	if (!base_->enabled())
		return;

	bool paint_thr_bg =
		conversion_threshold_disp_mode_ == GlobalSettings::ConvThrDispMode_Background;

	const vector<double> thresholds = base_->get_conversion_thresholds();

	// Only display thresholds if we have some and we show analog samples
	if ((thresholds.size() > 0) && paint_thr_bg &&
		((display_type_ == DisplayAnalog) || (display_type_ == DisplayBoth))) {

		const int visual_y = get_visual_y();
		const pair<int, int> extents = v_extents();
		const int top = visual_y + extents.first;
		const int btm = visual_y + extents.second;

		// Draw high/neutral/low areas
		if (thresholds.size() == 2) {
			int thr_lo = visual_y - thresholds[0] * scale_;
			int thr_hi = visual_y - thresholds[1] * scale_;
			thr_lo = min(max(thr_lo, top), btm);
			thr_hi = min(max(thr_hi, top), btm);

			p.fillRect(QRectF(pp.left(), top, pp.width(), thr_hi - top),
				QBrush(ThresholdColorHi));
			p.fillRect(QRectF(pp.left(), thr_hi, pp.width(), thr_lo - thr_hi),
				QBrush(ThresholdColorNe));
			p.fillRect(QRectF(pp.left(), thr_lo, pp.width(), btm - thr_lo),
				QBrush(ThresholdColorLo));
		} else {
			int thr = visual_y - thresholds[0] * scale_;
			thr = min(max(thr, top), btm);

			p.fillRect(QRectF(pp.left(), top, pp.width(), thr - top),
				QBrush(ThresholdColorHi));
			p.fillRect(QRectF(pp.left(), thr, pp.width(), btm - thr),
				QBrush(ThresholdColorLo));
		}

		paint_axis(p, pp, get_visual_y());
	} else {
		Trace::paint_back(p, pp);
		paint_axis(p, pp, get_visual_y());
	}
}

void AnalogSignal::paint_mid(QPainter &p, ViewItemPaintParams &pp)
{
	assert(base_->analog_data());
	assert(owner_);

	const int y = get_visual_y();

	if (!base_->enabled())
		return;

	if ((display_type_ == DisplayAnalog) || (display_type_ == DisplayBoth)) {
		paint_grid(p, y, pp.left(), pp.right());

		shared_ptr<pv::data::AnalogSegment> segment = get_analog_segment_to_paint();
		if (!segment || (segment->get_sample_count() == 0))
			return;

		const double pixels_offset = pp.pixels_offset();
		const double samplerate = max(1.0, segment->samplerate());
		const pv::util::Timestamp& start_time = segment->start_time();
		const int64_t last_sample = (int64_t)segment->get_sample_count() - 1;
		const double samples_per_pixel = samplerate * pp.scale();
		const pv::util::Timestamp start = samplerate * (pp.offset() - start_time);
		const pv::util::Timestamp end = start + samples_per_pixel * pp.width();

		const int64_t start_sample = min(max(floor(start).convert_to<int64_t>(),
			(int64_t)0), last_sample);
		const int64_t end_sample = min(max((ceil(end) + 1).convert_to<int64_t>(),
			(int64_t)0), last_sample);

		if (samples_per_pixel < EnvelopeThreshold)
			paint_trace(p, segment, y, pp.left(),
				start_sample, end_sample,
				pixels_offset, samples_per_pixel);
		else
			paint_envelope(p, segment, y, pp.left(),
				start_sample, end_sample,
				pixels_offset, samples_per_pixel);
	}

	if ((display_type_ == DisplayConverted) || (display_type_ == DisplayBoth))
		paint_logic_mid(p, pp);
}

void AnalogSignal::paint_fore(QPainter &p, ViewItemPaintParams &pp)
{
	if (!enabled())
		return;

	if ((display_type_ == DisplayAnalog) || (display_type_ == DisplayBoth)) {
		const int y = get_visual_y();

		// Show the info section on the right side of the trace
		const QString infotext = QString("%1 V/div").arg(resolution_);

		p.setPen(base_->color());
		p.setFont(QApplication::font());

		const QRectF bounding_rect = QRectF(pp.left(),
				y + v_extents().first,
				pp.width() - InfoTextMarginRight,
				v_extents().second - v_extents().first - InfoTextMarginBottom);

		p.drawText(bounding_rect, Qt::AlignRight | Qt::AlignBottom, infotext);
	}
}

void AnalogSignal::paint_grid(QPainter &p, int y, int left, int right)
{
	p.setRenderHint(QPainter::Antialiasing, false);

	GlobalSettings settings;
	const bool show_analog_minor_grid =
		settings.value(GlobalSettings::Key_View_ShowAnalogMinorGrid).toBool();

	if (pos_vdivs_ > 0) {
		p.setPen(QPen(GridMajorColor, 1, Qt::DashLine));
		for (int i = 1; i <= pos_vdivs_; i++) {
			const float dy = i * div_height_;
			p.drawLine(QLineF(left, y - dy, right, y - dy));
		}
	}

	if ((pos_vdivs_ > 0) && show_analog_minor_grid) {
		p.setPen(QPen(GridMinorColor, 1, Qt::DashLine));
		for (int i = 0; i < pos_vdivs_; i++) {
			const float dy = i * div_height_;
			const float dy25 = dy + (0.25 * div_height_);
			const float dy50 = dy + (0.50 * div_height_);
			const float dy75 = dy + (0.75 * div_height_);
			p.drawLine(QLineF(left, y - dy25, right, y - dy25));
			p.drawLine(QLineF(left, y - dy50, right, y - dy50));
			p.drawLine(QLineF(left, y - dy75, right, y - dy75));
		}
	}

	if (neg_vdivs_ > 0) {
		p.setPen(QPen(GridMajorColor, 1, Qt::DashLine));
		for (int i = 1; i <= neg_vdivs_; i++) {
			const float dy = i * div_height_;
			p.drawLine(QLineF(left, y + dy, right, y + dy));
		}
	}

	if ((pos_vdivs_ > 0) && show_analog_minor_grid) {
		p.setPen(QPen(GridMinorColor, 1, Qt::DashLine));
		for (int i = 0; i < neg_vdivs_; i++) {
			const float dy = i * div_height_;
			const float dy25 = dy + (0.25 * div_height_);
			const float dy50 = dy + (0.50 * div_height_);
			const float dy75 = dy + (0.75 * div_height_);
			p.drawLine(QLineF(left, y + dy25, right, y + dy25));
			p.drawLine(QLineF(left, y + dy50, right, y + dy50));
			p.drawLine(QLineF(left, y + dy75, right, y + dy75));
		}
	}

	p.setRenderHint(QPainter::Antialiasing, true);
}

void AnalogSignal::paint_trace(QPainter &p,
	const shared_ptr<pv::data::AnalogSegment> &segment,
	int y, int left, const int64_t start, const int64_t end,
	const double pixels_offset, const double samples_per_pixel)
{
	if (end <= start)
		return;

	bool paint_thr_dots =
		(base_->get_conversion_type() != data::SignalBase::NoConversion) &&
		(conversion_threshold_disp_mode_ == GlobalSettings::ConvThrDispMode_Dots);

	vector<double> thresholds;
	if (paint_thr_dots)
		thresholds = base_->get_conversion_thresholds();

	// Calculate and paint the sampling points if enabled and useful
	GlobalSettings settings;
	const bool show_sampling_points =
		(settings.value(GlobalSettings::Key_View_ShowSamplingPoints).toBool() ||
		paint_thr_dots) && (samples_per_pixel < 0.25);

	p.setPen(base_->color());

	const int64_t points_count = end - start;

	QPointF *points = new QPointF[points_count];
	QPointF *point = points;

	vector<QRectF> sampling_points[3];

	int64_t sample_count = min(points_count, TracePaintBlockSize);
	int64_t block_sample = 0;
	float *sample_block = new float[TracePaintBlockSize];
	segment->get_samples(start, start + sample_count, sample_block);

	const int w = 2;
	for (int64_t sample = start; sample != end; sample++, block_sample++) {

		if (block_sample == TracePaintBlockSize) {
			block_sample = 0;
			sample_count = min(points_count - sample, TracePaintBlockSize);
			segment->get_samples(sample, sample + sample_count, sample_block);
		}

		const float x = (sample / samples_per_pixel -
			pixels_offset) + left;

		*point++ = QPointF(x, y - sample_block[block_sample] * scale_);

		if (show_sampling_points) {
			int idx = 0;  // Neutral

			if (paint_thr_dots) {
				if (thresholds.size() == 1)
					idx = (sample_block[block_sample] >= thresholds[0]) ? 2 : 1;
				else if (thresholds.size() == 2) {
					if (sample_block[block_sample] > thresholds[1])
						idx = 2;  // High
					else if (sample_block[block_sample] < thresholds[0])
						idx = 1;  // Low
				}
			}

			sampling_points[idx].emplace_back(x - (w / 2), y - sample_block[block_sample] * scale_ - (w / 2), w, w);
		}
	}
	delete[] sample_block;

	p.drawPolyline(points, points_count);

	if (show_sampling_points) {
		if (paint_thr_dots) {
			p.setPen(SamplingPointColorNe);
			p.drawRects(sampling_points[0].data(), sampling_points[0].size());
			p.setPen(SamplingPointColorLo);
			p.drawRects(sampling_points[1].data(), sampling_points[1].size());
			p.setPen(SamplingPointColorHi);
			p.drawRects(sampling_points[2].data(), sampling_points[2].size());
		} else {
			p.setPen(SamplingPointColor);
			p.drawRects(sampling_points[0].data(), sampling_points[0].size());
		}
	}

	delete[] points;
}

void AnalogSignal::paint_envelope(QPainter &p,
	const shared_ptr<pv::data::AnalogSegment> &segment,
	int y, int left, const int64_t start, const int64_t end,
	const double pixels_offset, const double samples_per_pixel)
{
	using pv::data::AnalogSegment;

	AnalogSegment::EnvelopeSection e;
	segment->get_envelope_section(e, start, end, samples_per_pixel);

	if (e.length < 2)
		return;

	p.setPen(QPen(Qt::NoPen));
	p.setBrush(base_->color());

	QRectF *const rects = new QRectF[e.length];
	QRectF *rect = rects;

	for (uint64_t sample = 0; sample < e.length - 1; sample++) {
		const float x = ((e.scale * sample + e.start) /
			samples_per_pixel - pixels_offset) + left;
		const AnalogSegment::EnvelopeSample *const s =
			e.samples + sample;

		// We overlap this sample with the next so that vertical
		// gaps do not appear during steep rising or falling edges
		const float b = y - max(s->max, (s + 1)->min) * scale_;
		const float t = y - min(s->min, (s + 1)->max) * scale_;

		float h = b - t;
		if (h >= 0.0f && h <= 1.0f)
			h = 1.0f;
		if (h <= 0.0f && h >= -1.0f)
			h = -1.0f;

		*rect++ = QRectF(x, t, 1.0f, h);
	}

	p.drawRects(rects, e.length);

	delete[] rects;
	delete[] e.samples;
}

void AnalogSignal::paint_logic_mid(QPainter &p, ViewItemPaintParams &pp)
{
	QLineF *line;

	vector< pair<int64_t, bool> > edges;

	assert(base_);

	const int y = get_visual_y();

	if (!base_->enabled() || !base_->logic_data())
		return;

	const int signal_margin =
		QFontMetrics(QApplication::font()).height() / 2;

	const int ph = min(pos_vdivs_, 1) * div_height_;
	const int nh = min(neg_vdivs_, 1) * div_height_;
	const float high_offset = y - ph + signal_margin + 0.5f;
	const float low_offset = y + nh - signal_margin - 0.5f;

	shared_ptr<pv::data::LogicSegment> segment = get_logic_segment_to_paint();
	if (!segment || (segment->get_sample_count() == 0))
		return;

	double samplerate = segment->samplerate();

	// Show sample rate as 1Hz when it is unknown
	if (samplerate == 0.0)
		samplerate = 1.0;

	const double pixels_offset = pp.pixels_offset();
	const pv::util::Timestamp& start_time = segment->start_time();
	const int64_t last_sample = (int64_t)segment->get_sample_count() - 1;
	const double samples_per_pixel = samplerate * pp.scale();
	const double pixels_per_sample = 1 / samples_per_pixel;
	const pv::util::Timestamp start = samplerate * (pp.offset() - start_time);
	const pv::util::Timestamp end = start + samples_per_pixel * pp.width();

	const int64_t start_sample = min(max(floor(start).convert_to<int64_t>(),
		(int64_t)0), last_sample);
	const uint64_t end_sample = min(max(ceil(end).convert_to<int64_t>(),
		(int64_t)0), last_sample);

	segment->get_subsampled_edges(edges, start_sample, end_sample,
		samples_per_pixel / LogicSignal::Oversampling, 0);
	assert(edges.size() >= 2);

	// Check whether we need to paint the sampling points
	GlobalSettings settings;
	const bool show_sampling_points =
		settings.value(GlobalSettings::Key_View_ShowSamplingPoints).toBool() &&
		(samples_per_pixel < 0.25);

	vector<QRectF> sampling_points;
	float sampling_point_x = 0.0f;
	int64_t sampling_point_sample = start_sample;
	const int w = 2;

	if (show_sampling_points) {
		sampling_points.reserve(end_sample - start_sample + 1);
		sampling_point_x = (edges.cbegin()->first / samples_per_pixel - pixels_offset) + pp.left();
	}

	// Paint the edges
	const unsigned int edge_count = edges.size() - 2;
	QLineF *const edge_lines = new QLineF[edge_count];
	line = edge_lines;

	for (auto i = edges.cbegin() + 1; i != edges.cend() - 1; i++) {
		const float x = ((*i).first / samples_per_pixel -
			pixels_offset) + pp.left();
		*line++ = QLineF(x, high_offset, x, low_offset);

		if (show_sampling_points)
			while (sampling_point_sample < (*i).first) {
				const float y = (*i).second ? low_offset : high_offset;
				sampling_points.emplace_back(
					QRectF(sampling_point_x - (w / 2), y - (w / 2), w, w));
				sampling_point_sample++;
				sampling_point_x += pixels_per_sample;
			};
	}

	// Calculate the sample points from the last edge to the end of the trace
	if (show_sampling_points)
		while ((uint64_t)sampling_point_sample <= end_sample) {
			// Signal changed after the last edge, so the level is inverted
			const float y = (edges.cend() - 1)->second ? high_offset : low_offset;
			sampling_points.emplace_back(
				QRectF(sampling_point_x - (w / 2), y - (w / 2), w, w));
			sampling_point_sample++;
			sampling_point_x += pixels_per_sample;
		};

	p.setPen(LogicSignal::EdgeColor);
	p.drawLines(edge_lines, edge_count);
	delete[] edge_lines;

	// Paint the caps
	const unsigned int max_cap_line_count = edges.size();
	QLineF *const cap_lines = new QLineF[max_cap_line_count];

	p.setPen(LogicSignal::HighColor);
	paint_logic_caps(p, cap_lines, edges, true, samples_per_pixel,
		pixels_offset, pp.left(), high_offset);
	p.setPen(LogicSignal::LowColor);
	paint_logic_caps(p, cap_lines, edges, false, samples_per_pixel,
		pixels_offset, pp.left(), low_offset);

	delete[] cap_lines;

	// Paint the sampling points
	if (show_sampling_points) {
		p.setPen(SamplingPointColor);
		p.drawRects(sampling_points.data(), sampling_points.size());
	}
}

void AnalogSignal::paint_logic_caps(QPainter &p, QLineF *const lines,
	vector< pair<int64_t, bool> > &edges, bool level,
	double samples_per_pixel, double pixels_offset, float x_offset,
	float y_offset)
{
	QLineF *line = lines;

	for (auto i = edges.begin(); i != (edges.end() - 1); i++)
		if ((*i).second == level) {
			*line++ = QLineF(
				((*i).first / samples_per_pixel -
					pixels_offset) + x_offset, y_offset,
				((*(i+1)).first / samples_per_pixel -
					pixels_offset) + x_offset, y_offset);
		}

	p.drawLines(lines, line - lines);
}

shared_ptr<pv::data::AnalogSegment> AnalogSignal::get_analog_segment_to_paint() const
{
	shared_ptr<pv::data::AnalogSegment> segment;

	const deque< shared_ptr<pv::data::AnalogSegment> > &segments =
		base_->analog_data()->analog_segments();

	if (!segments.empty()) {
		if (segment_display_mode_ == ShowLastSegmentOnly)
			segment = segments.back();

		if ((segment_display_mode_ == ShowSingleSegmentOnly) ||
				(segment_display_mode_ == ShowLastCompleteSegmentOnly)) {
			try {
				segment = segments.at(current_segment_);
			} catch (out_of_range&) {
				qDebug() << "Current analog segment out of range for signal" << base_->name() << ":" << current_segment_;
			}
		}
	}

	return segment;
}

shared_ptr<pv::data::LogicSegment> AnalogSignal::get_logic_segment_to_paint() const
{
	shared_ptr<pv::data::LogicSegment> segment;

	const deque< shared_ptr<pv::data::LogicSegment> > &segments =
		base_->logic_data()->logic_segments();

	if (!segments.empty()) {
		if (segment_display_mode_ == ShowLastSegmentOnly)
			segment = segments.back();

		if ((segment_display_mode_ == ShowSingleSegmentOnly) ||
				(segment_display_mode_ == ShowLastCompleteSegmentOnly)) {
			try {
				segment = segments.at(current_segment_);
			} catch (out_of_range&) {
				qDebug() << "Current logic segment out of range for signal" << base_->name() << ":" << current_segment_;
			}
		}
	}

	return segment;
}

float AnalogSignal::get_resolution(int scale_index)
{
	const float seq[] = {1.0f, 2.0f, 5.0f};

	const int offset = numeric_limits<int>::max() / (2 * countof(seq));
	const div_t d = div((int)(scale_index + countof(seq) * offset),
		countof(seq));

	return powf(10.0f, d.quot - offset) * seq[d.rem];
}

void AnalogSignal::update_scale()
{
	resolution_ = get_resolution(scale_index_);
	scale_ = div_height_ / resolution_;
}

void AnalogSignal::update_conversion_widgets()
{
	SignalBase::ConversionType conv_type = base_->get_conversion_type();

	// Enable or disable widgets depending on conversion state
	conv_threshold_cb_->setEnabled(conv_type != SignalBase::NoConversion);
	display_type_cb_->setEnabled(conv_type != SignalBase::NoConversion);

	conv_threshold_cb_->clear();

	vector < pair<QString, int> > presets = base_->get_conversion_presets();

	// Prevent the combo box from firing the "edit text changed" signal
	// as that would involuntarily select the first entry
	conv_threshold_cb_->blockSignals(true);

	// Set available options depending on chosen conversion
	for (pair<QString, int> preset : presets)
		conv_threshold_cb_->addItem(preset.first, preset.second);

	map < QString, QVariant > options = base_->get_conversion_options();

	if (conv_type == SignalBase::A2LConversionByThreshold) {
		const vector<double> thresholds = base_->get_conversion_thresholds(
				SignalBase::A2LConversionByThreshold, true);
		conv_threshold_cb_->addItem(
				QString("%1V").arg(QString::number(thresholds[0], 'f', 1)), -1);
	}

	if (conv_type == SignalBase::A2LConversionBySchmittTrigger) {
		const vector<double> thresholds = base_->get_conversion_thresholds(
				SignalBase::A2LConversionBySchmittTrigger, true);
		conv_threshold_cb_->addItem(QString("%1V/%2V").arg(
				QString::number(thresholds[0], 'f', 1),
				QString::number(thresholds[1], 'f', 1)), -1);
	}

	int preset_id = base_->get_current_conversion_preset();
	conv_threshold_cb_->setCurrentIndex(
			conv_threshold_cb_->findData(preset_id));

	conv_threshold_cb_->blockSignals(false);
}

void AnalogSignal::perform_autoranging(bool keep_divs, bool force_update)
{
	const deque< shared_ptr<pv::data::AnalogSegment> > &segments =
		base_->analog_data()->analog_segments();

	if (segments.empty())
		return;

	static double prev_min = 0, prev_max = 0;
	double min = 0, max = 0;

	for (shared_ptr<pv::data::AnalogSegment> segment : segments) {
		pair<double, double> mm = segment->get_min_max();
		min = std::min(min, mm.first);
		max = std::max(max, mm.second);
	}

	if ((min == prev_min) && (max == prev_max) && !force_update)
		return;

	prev_min = min;
	prev_max = max;

	// If we're allowed to alter the div assignment...
	if (!keep_divs) {
		// Use all divs for the positive range if there are no negative values
		if ((min == 0) && (neg_vdivs_ > 0)) {
			pos_vdivs_ += neg_vdivs_;
			neg_vdivs_ = 0;
		}

		// Split up the divs if there are negative values but no negative divs
		if ((min < 0) && (neg_vdivs_ == 0)) {
			neg_vdivs_ = pos_vdivs_ / 2;
			pos_vdivs_ -= neg_vdivs_;
		}
	}

 	// If there is still no positive div when we need it, add one
	// (this can happen when pos_vdivs==neg_vdivs==0)
	if ((max > 0) && (pos_vdivs_ == 0)) {
		pos_vdivs_ = 1;
		owner_->extents_changed(false, true);
	}

	// If there is still no negative div when we need it, add one
	// (this can happen when pos_vdivs was 0 or 1 when trying to split)
	if ((min < 0) && (neg_vdivs_ == 0)) {
		neg_vdivs_ = 1;
		owner_->extents_changed(false, true);
	}

	double min_value_per_div;
	if ((pos_vdivs_ > 0) && (neg_vdivs_ >  0))
		min_value_per_div = std::max(max / pos_vdivs_, -min / neg_vdivs_);
	else if (pos_vdivs_ > 0)
		min_value_per_div = max / pos_vdivs_;
	else
		min_value_per_div = -min / neg_vdivs_;

	// Find first scale value that is bigger than the value we need
	for (int i = MinScaleIndex; i < MaxScaleIndex; i++)
		if (get_resolution(i) > min_value_per_div) {
			scale_index_ = i;
			break;
		}

	update_scale();
}

void AnalogSignal::populate_popup_form(QWidget *parent, QFormLayout *form)
{
	// Add the standard options
	Signal::populate_popup_form(parent, form);

	QFormLayout *const layout = new QFormLayout;

	// Add div-related settings
	pvdiv_sb_ = new QSpinBox(parent);
	pvdiv_sb_->setRange(0, MaximumVDivs);
	pvdiv_sb_->setValue(pos_vdivs_);
	connect(pvdiv_sb_, SIGNAL(valueChanged(int)),
		this, SLOT(on_pos_vdivs_changed(int)));
	layout->addRow(tr("Number of pos vertical divs"), pvdiv_sb_);

	nvdiv_sb_ = new QSpinBox(parent);
	nvdiv_sb_->setRange(0, MaximumVDivs);
	nvdiv_sb_->setValue(neg_vdivs_);
	connect(nvdiv_sb_, SIGNAL(valueChanged(int)),
		this, SLOT(on_neg_vdivs_changed(int)));
	layout->addRow(tr("Number of neg vertical divs"), nvdiv_sb_);

	div_height_sb_ = new QSpinBox(parent);
	div_height_sb_->setRange(20, 1000);
	div_height_sb_->setSingleStep(5);
	div_height_sb_->setSuffix(tr(" pixels"));
	div_height_sb_->setValue(div_height_);
	connect(div_height_sb_, SIGNAL(valueChanged(int)),
		this, SLOT(on_div_height_changed(int)));
	layout->addRow(tr("Div height"), div_height_sb_);

	// Add the vertical resolution
	resolution_cb_ = new QComboBox(parent);

	for (int i = MinScaleIndex; i < MaxScaleIndex; i++) {
		const QString label = QString("%1").arg(get_resolution(i));
		resolution_cb_->insertItem(0, label, QVariant(i));
	}

	int cur_idx = resolution_cb_->findData(QVariant(scale_index_));
	resolution_cb_->setCurrentIndex(cur_idx);

	connect(resolution_cb_, SIGNAL(currentIndexChanged(int)),
		this, SLOT(on_resolution_changed(int)));

	QGridLayout *const vdiv_layout = new QGridLayout;
	QLabel *const vdiv_unit = new QLabel(tr("V/div"));
	vdiv_layout->addWidget(resolution_cb_, 0, 0);
	vdiv_layout->addWidget(vdiv_unit, 0, 1);

	layout->addRow(tr("Vertical resolution"), vdiv_layout);

	// Add the autoranging checkbox
	QCheckBox* autoranging_cb = new QCheckBox();
	autoranging_cb->setCheckState(autoranging_ ? Qt::Checked : Qt::Unchecked);

	connect(autoranging_cb, SIGNAL(stateChanged(int)),
		this, SLOT(on_autoranging_changed(int)));

	layout->addRow(tr("Autoranging"), autoranging_cb);

	// Add the conversion type dropdown
	conversion_cb_ = new QComboBox();

	conversion_cb_->addItem(tr("none"),
		SignalBase::NoConversion);
	conversion_cb_->addItem(tr("to logic via threshold"),
		SignalBase::A2LConversionByThreshold);
	conversion_cb_->addItem(tr("to logic via schmitt-trigger"),
		SignalBase::A2LConversionBySchmittTrigger);

	cur_idx = conversion_cb_->findData(QVariant(base_->get_conversion_type()));
	conversion_cb_->setCurrentIndex(cur_idx);

	layout->addRow(tr("Conversion"), conversion_cb_);

	connect(conversion_cb_, SIGNAL(currentIndexChanged(int)),
		this, SLOT(on_conversion_changed(int)));

    // Add the conversion threshold settings
    conv_threshold_cb_ = new QComboBox();
    conv_threshold_cb_->setEditable(true);

    layout->addRow(tr("Conversion threshold(s)"), conv_threshold_cb_);

    connect(conv_threshold_cb_, SIGNAL(currentIndexChanged(int)),
            this, SLOT(on_conv_threshold_changed(int)));
    connect(conv_threshold_cb_, SIGNAL(editTextChanged(const QString)),
            this, SLOT(on_conv_threshold_changed()));  // index will be -1

	// Add the display type dropdown
	display_type_cb_ = new QComboBox();

	display_type_cb_->addItem(tr("analog"), DisplayAnalog);
	display_type_cb_->addItem(tr("converted"), DisplayConverted);
	display_type_cb_->addItem(tr("analog+converted"), DisplayBoth);

	cur_idx = display_type_cb_->findData(QVariant(display_type_));
	display_type_cb_->setCurrentIndex(cur_idx);

	layout->addRow(tr("Show traces for"), display_type_cb_);

	connect(display_type_cb_, SIGNAL(currentIndexChanged(int)),
		this, SLOT(on_display_type_changed(int)));

	// Update the conversion widget contents and states
	update_conversion_widgets();

	form->addRow(layout);
}

void AnalogSignal::on_min_max_changed(float min, float max)
{
	(void)min;
	(void)max;

	if (autoranging_)
		perform_autoranging(false, false);
}

void AnalogSignal::on_pos_vdivs_changed(int vdivs)
{
	if (vdivs == pos_vdivs_)
		return;

	pos_vdivs_ = vdivs;

	// There has to be at least one div, positive or negative
	if ((neg_vdivs_ == 0) && (pos_vdivs_ == 0)) {
		pos_vdivs_ = 1;
		if (pvdiv_sb_)
			pvdiv_sb_->setValue(pos_vdivs_);
	}

	if (autoranging_) {
		perform_autoranging(true, true);

		// It could be that a positive or negative div was added, so update
		if (pvdiv_sb_) {
			pvdiv_sb_->setValue(pos_vdivs_);
			nvdiv_sb_->setValue(neg_vdivs_);
		}
	}

	if (owner_) {
		// Call order is important, otherwise the lazy event handler won't work
		owner_->extents_changed(false, true);
		owner_->row_item_appearance_changed(false, true);
	}
}

void AnalogSignal::on_neg_vdivs_changed(int vdivs)
{
	if (vdivs == neg_vdivs_)
		return;

	neg_vdivs_ = vdivs;

	// There has to be at least one div, positive or negative
	if ((neg_vdivs_ == 0) && (pos_vdivs_ == 0)) {
		pos_vdivs_ = 1;
		if (pvdiv_sb_)
			pvdiv_sb_->setValue(pos_vdivs_);
	}

	if (autoranging_) {
		perform_autoranging(true, true);

		// It could be that a positive or negative div was added, so update
		if (pvdiv_sb_) {
			pvdiv_sb_->setValue(pos_vdivs_);
			nvdiv_sb_->setValue(neg_vdivs_);
		}
	}

	if (owner_) {
		// Call order is important, otherwise the lazy event handler won't work
		owner_->extents_changed(false, true);
		owner_->row_item_appearance_changed(false, true);
	}
}

void AnalogSignal::on_div_height_changed(int height)
{
	div_height_ = height;
	update_scale();

	if (owner_) {
		// Call order is important, otherwise the lazy event handler won't work
		owner_->extents_changed(false, true);
		owner_->row_item_appearance_changed(false, true);
	}
}

void AnalogSignal::on_resolution_changed(int index)
{
	scale_index_ = resolution_cb_->itemData(index).toInt();
	update_scale();

	if (owner_)
		owner_->row_item_appearance_changed(false, true);
}

void AnalogSignal::on_autoranging_changed(int state)
{
	autoranging_ = (state == Qt::Checked);

	if (autoranging_)
		perform_autoranging(false, true);

	if (owner_) {
		// Call order is important, otherwise the lazy event handler won't work
		owner_->extents_changed(false, true);
		owner_->row_item_appearance_changed(false, true);
	}
}

void AnalogSignal::on_conversion_changed(int index)
{
	SignalBase::ConversionType old_conv_type = base_->get_conversion_type();

	SignalBase::ConversionType conv_type =
		(SignalBase::ConversionType)(conversion_cb_->itemData(index).toInt());

	if (conv_type != old_conv_type) {
		base_->set_conversion_type(conv_type);
		update_conversion_widgets();

		if (owner_)
			owner_->row_item_appearance_changed(false, true);
	}
}

void AnalogSignal::on_conv_threshold_changed(int index)
{
	SignalBase::ConversionType conv_type = base_->get_conversion_type();

	// Note: index is set to -1 if the text in the combo box matches none of
	// the entries in the combo box

	if ((index == -1) && (conv_threshold_cb_->currentText().length() == 0))
		return;

	// The combo box entry with the custom value has user_data set to -1
	const int user_data = conv_threshold_cb_->findText(
			conv_threshold_cb_->currentText());

	const bool use_custom_thr = (index == -1) || (user_data == -1);

	if (conv_type == SignalBase::A2LConversionByThreshold && use_custom_thr) {
		// Not one of the preset values, try to parse the combo box text
		// Note: Regex loosely based on
		// https://txt2re.com/index-c++.php3?s=0.1V&1&-13
		QString re1 = "([+-]?\\d*[\\.,]?\\d*)"; // Float value
		QString re2 = "([a-zA-Z]*)"; // SI unit
		QRegExp regex(re1 + re2);

		const QString text = conv_threshold_cb_->currentText();
		if (!regex.exactMatch(text))
			return;  // String doesn't match the regex

		QStringList tokens = regex.capturedTexts();

		// For now, we simply assume that the unit is volt without modifiers
		const double thr = tokens.at(1).toDouble();

		// Only restart the conversion if the threshold was updated.
		// We're starting a delayed conversion because the user may still be
		// typing and the UI would lag if we kept on restarting it immediately
		if (base_->set_conversion_option("threshold_value", thr))
			base_->start_conversion(true);
	}

	if (conv_type == SignalBase::A2LConversionBySchmittTrigger && use_custom_thr) {
		// Not one of the preset values, try to parse the combo box text
		// Note: Regex loosely based on
		// https://txt2re.com/index-c++.php3?s=0.1V/0.2V&2&14&-22&3&15
		QString re1 = "([+-]?\\d*[\\.,]?\\d*)"; // Float value
		QString re2 = "([a-zA-Z]*)"; // SI unit
		QString re3 = "\\/"; // Forward slash, not captured
		QString re4 = "([+-]?\\d*[\\.,]?\\d*)"; // Float value
		QString re5 = "([a-zA-Z]*)"; // SI unit
		QRegExp regex(re1 + re2 + re3 + re4 + re5);

		const QString text = conv_threshold_cb_->currentText();
		if (!regex.exactMatch(text))
			return;  // String doesn't match the regex

		QStringList tokens = regex.capturedTexts();

		// For now, we simply assume that the unit is volt without modifiers
		const double low_thr = tokens.at(1).toDouble();
		const double high_thr = tokens.at(3).toDouble();

		// Only restart the conversion if one of the options was updated.
		// We're starting a delayed conversion because the user may still be
		// typing and the UI would lag if we kept on restarting it immediately
		bool o1 = base_->set_conversion_option("threshold_value_low", low_thr);
		bool o2 = base_->set_conversion_option("threshold_value_high", high_thr);
		if (o1 || o2)
			base_->start_conversion(true);  // Start delayed conversion
	}

	base_->set_conversion_preset((SignalBase::ConversionPreset)index);

	// Immediately start the conversion if we're not using custom values
	// (i.e. we're using one of the presets)
	if (!use_custom_thr)
		base_->start_conversion();
}

void AnalogSignal::on_delayed_conversion_starter()
{
	base_->start_conversion();
}

void AnalogSignal::on_display_type_changed(int index)
{
	display_type_ = (DisplayType)(display_type_cb_->itemData(index).toInt());

	if (owner_)
		owner_->row_item_appearance_changed(false, true);
}

void AnalogSignal::on_settingViewConversionThresholdDispMode_changed(const QVariant new_value)
{
	conversion_threshold_disp_mode_ = new_value.toInt();

	if (owner_)
		owner_->row_item_appearance_changed(false, true);
}

} // namespace trace
} // namespace views
} // namespace pv