[pulseview.git] / doc / pulseview.1

.TH PULSEVIEW 1 "July 31, 2019"
.SH "NAME"
PulseView \- Qt-based LA/scope/MSO GUI for sigrok
.SH "SYNOPSIS"
.B pulseview \fR[\fBOPTIONS\fR] [\fBFILE\fR]
.SH "DESCRIPTION"
.B PulseView
is a cross-platform Qt-based GUI for the
.B sigrok
software suite for test and measurement equipment such as logic analyzers,
oscilloscopes, MSOs, and more.
.SH "OPTIONS"
.B PulseView
has very few command line options, as most configuration elements are
available from the GUI itself.
.sp
If the optional \fBFILE\fR argument is supplied, PulseView tries to open
the specified file. It has to be in the "libsigrok session" format (.sr)
unless -I is used to specify the input file format.
.TP
.B "\-l, \-\-loglevel"
Set the libsigrok and libsigrokdecode loglevel. At the moment PulseView
doesn't support setting the two loglevels independently. The higher the
number, the more debug output will be printed. Valid loglevels are:
.sp
\fB0\fP   None
.br
\fB1\fP   Error
.br
\fB2\fP   Warnings
.br
\fB3\fP   Informational
.br
\fB4\fP   Debug
.br
\fB5\fP   Spew
.TP
.B "\-h, \-?, \-\-help"
Show a help text and exit.
.TP
.B "\-V, \-\-version"
Show version information and exit.
.TP
.BR "\-d, \-\-driver " <drivername>
Specify the capture device to connect to. If the
.B \-\-driver
option is not supplied, PulseView attempts to re-connect to the
most recently used device, or auto-detect available devices.
.TP
.BR "\-D, \-\-dont\-scan "
Usually PulseView automatically scans all drivers to find suitable
devices during program startup. This option disables the auto-scan.
Users can either specify the
.B \-\-driver
option to pick a device at startup, or interactively scan for devices
after PulseView has finished starting up.
.TP
.BR "\-i, \-\-input\-file " <filename>
Load input from a file. If the
.B \-\-input\-format
option is not supplied, PulseView attempts to load the file as a sigrok session
file.
.TP
.BR "\-I, \-\-input\-format " <format>
Specifies the format of the input file to be loaded.
.TP
.BR "\-s, \-\-settings " <filename>
Load PulseView session setup to use with the input file. The setup file must be
in the "PulseView session setup" format (.pvs).
.TP
.BR "\-c, \-\-clean"
Prevents the previously used sessions to be restored from settings storage.
This is useful if you want only a single session with the file given on the
command line instead of restoring all previously used sessions as well.
.SH "KEYBOARD SHORTCUTS"
.TP
.B "f"
Zoom-to-fit.
.TP
.B "s"
Enable / disable sticky scrolling. When enabled, the right edge of the screen
always shows the most recently captured data.
.TP
.B "."
Show / hide sampling points.
.TP
.B "g"
Show / hide analog minor grid (in addition to the vdiv grid).
.TP
.B "c"
Show / hide cursors.
.TP
.B "b"
Toggle between coloured trace backgrounds and alternating light/dark
gray trace backgrounds.
.TP
.B "SPACE"
Start / stop an acquisition.
.TP
.B "Left/right arrow keys"
Scroll left/right.
.TP
.B "Up/down arrow keys"
Zoom in/out.
.TP
.B "Home"
Jump to the start of the sample data.
.TP
.B "End"
Jump to the end of the sample data.
.TP
.B "CTRL+o"
Open file.
.TP
.B "CTRL+s"
Save as...
.TP
.B "CTRL+r"
Save selected range as...
.TP
.B "CTRL+g"
Group all currently selected traces into a trace group.
.TP
.B "CTRL+u"
Ungroup the traces in the currently selected trace group.
.TP
.B "CTRL+up/down arrow keys"
Scroll down/up.
.TP
.B "CTRL++"
Zoom in.
.TP
.B "CTRL+-"
Zoom out.
.TP
.B "CTRL+q"
Quit, i.e. shutdown PulseView (closing all session tabs).
.TP
.B "CTRL+w"
Close the current session tab.
.SH "EXIT STATUS"
.B PulseView
exits with 0 on success, 1 on most failures.
.SH "SEE ALSO"
\fBsigrok\-cli\fP(1)
.SH "BUGS"
Please report any bugs via Bugzilla
.RB "(" http://sigrok.org/bugzilla ")"
or on the sigrok\-devel mailing list
.RB "(" sigrok\-devel@lists.souceforge.net ")."
.SH "LICENSE"
.B PulseView
is covered by the GNU General Public License (GPL), version 3 or later.
.SH "AUTHORS"
Please see the individual source code files.
.PP
This manual page was written by Uwe Hermann <uwe@hermann\-uwe.de>.
It is licensed under the terms of the GNU GPL (version 2 or later).
Commit	Line	Data
9c91ad7f	1	.TH PULSEVIEW 1 "July 31, 2019"
94236aa4	2	.SH "NAME"
e65ff35e	3	PulseView \- Qt-based LA/scope/MSO GUI for sigrok
94236aa4	4	.SH "SYNOPSIS"
99d4a087	5	.B pulseview \fR[\fBOPTIONS\fR] [\fBFILE\fR]
94236aa4 UH	6	.SH "DESCRIPTION"
	7	.B PulseView
	8	is a cross-platform Qt-based GUI for the
	9	.B sigrok
	10	software suite for test and measurement equipment such as logic analyzers,
e65ff35e	11	oscilloscopes, MSOs, and more.
94236aa4 UH	12	.SH "OPTIONS"
	13	.B PulseView
	14	has very few command line options, as most configuration elements are
	15	available from the GUI itself.
6ce79e39	16	.sp
99d4a087 SA	17	If the optional \fBFILE\fR argument is supplied, PulseView tries to open
	18	the specified file. It has to be in the "libsigrok session" format (.sr)
	19	unless -I is used to specify the input file format.
6ce79e39 UH	20	.TP
	21	.B "\-l, \-\-loglevel"
	22	Set the libsigrok and libsigrokdecode loglevel. At the moment PulseView
	23	doesn't support setting the two loglevels independently. The higher the
	24	number, the more debug output will be printed. Valid loglevels are:
	25	.sp
	26	\fB0\fP None
	27	.br
	28	\fB1\fP Error
	29	.br
	30	\fB2\fP Warnings
	31	.br
	32	\fB3\fP Informational
	33	.br
	34	\fB4\fP Debug
	35	.br
	36	\fB5\fP Spew
94236aa4 UH	37	.TP
	38	.B "\-h, \-?, \-\-help"
	39	Show a help text and exit.
	40	.TP
	41	.B "\-V, \-\-version"
	42	Show version information and exit.
e3c79b07	43	.TP
2bc3626e GS	44	.BR "\-d, \-\-driver " <drivername>
	45	Specify the capture device to connect to. If the
	46	.B \-\-driver
	47	option is not supplied, PulseView attempts to re-connect to the
	48	most recently used device, or auto-detect available devices.
	49	.TP
0e96068d	50	.BR "\-D, \-\-dont\-scan "
ba0c5f89 GS	51	Usually PulseView automatically scans all drivers to find suitable
	52	devices during program startup. This option disables the auto-scan.
	53	Users can either specify the
	54	.B \-\-driver
	55	option to pick a device at startup, or interactively scan for devices
	56	after PulseView has finished starting up.
	57	.TP
e3c79b07 JH	58	.BR "\-i, \-\-input\-file " <filename>
	59	Load input from a file. If the
	60	.B \-\-input\-format
228a5480	61	option is not supplied, PulseView attempts to load the file as a sigrok session
e3c79b07 JH	62	file.
	63	.TP
	64	.BR "\-I, \-\-input\-format " <format>
	65	Specifies the format of the input file to be loaded.
99d4a087	66	.TP
611c8625 DL	67	.BR "\-s, \-\-settings " <filename>
	68	Load PulseView session setup to use with the input file. The setup file must be
	69	in the "PulseView session setup" format (.pvs).
	70	.TP
99d4a087 SA	71	.BR "\-c, \-\-clean"
	72	Prevents the previously used sessions to be restored from settings storage.
	73	This is useful if you want only a single session with the file given on the
	74	command line instead of restoring all previously used sessions as well.
1022c445 UH	75	.SH "KEYBOARD SHORTCUTS"
	76	.TP
	77	.B "f"
	78	Zoom-to-fit.
	79	.TP
1022c445	80	.B "s"
99d4a087 SA	81	Enable / disable sticky scrolling. When enabled, the right edge of the screen
99d4a087 SA	82	always shows the most recently captured data.
1022c445	83	.TP
051ba3b3 UH	84	.B "."
	85	Show / hide sampling points.
	86	.TP
8ad61f40 UH	87	.B "g"
	88	Show / hide analog minor grid (in addition to the vdiv grid).
	89	.TP
1022c445 UH	90	.B "c"
	91	Show / hide cursors.
	92	.TP
c281fdc6 UH	93	.B "b"
	94	Toggle between coloured trace backgrounds and alternating light/dark
	95	gray trace backgrounds.
	96	.TP
1022c445 UH	97	.B "SPACE"
	98	Start / stop an acquisition.
	99	.TP
9c91ad7f UH	100	.B "Left/right arrow keys"
	101	Scroll left/right.
	102	.TP
	103	.B "Up/down arrow keys"
	104	Zoom in/out.
	105	.TP
	106	.B "Home"
	107	Jump to the start of the sample data.
	108	.TP
	109	.B "End"
	110	Jump to the end of the sample data.
1022c445 UH	111	.TP
	112	.B "CTRL+o"
	113	Open file.
	114	.TP
	115	.B "CTRL+s"
	116	Save as...
	117	.TP
	118	.B "CTRL+r"
	119	Save selected range as...
	120	.TP
	121	.B "CTRL+g"
	122	Group all currently selected traces into a trace group.
	123	.TP
	124	.B "CTRL+u"
	125	Ungroup the traces in the currently selected trace group.
	126	.TP
9c91ad7f UH	127	.B "CTRL+up/down arrow keys"
	128	Scroll down/up.
	129	.TP
1022c445 UH	130	.B "CTRL++"
	131	Zoom in.
	132	.TP
	133	.B "CTRL+-"
	134	Zoom out.
	135	.TP
	136	.B "CTRL+q"
78e14473 UH	137	Quit, i.e. shutdown PulseView (closing all session tabs).
	138	.TP
	139	.B "CTRL+w"
	140	Close the current session tab.
94236aa4 UH	141	.SH "EXIT STATUS"
	142	.B PulseView
	143	exits with 0 on success, 1 on most failures.
	144	.SH "SEE ALSO"
e65ff35e	145	\fBsigrok\-cli\fP(1)
94236aa4	146	.SH "BUGS"
e65ff35e UH	147	Please report any bugs via Bugzilla
	148	.RB "(" http://sigrok.org/bugzilla ")"
	149	or on the sigrok\-devel mailing list
94236aa4 UH	150	.RB "(" sigrok\-devel@lists.souceforge.net ")."
	151	.SH "LICENSE"
	152	.B PulseView
0ec7aba5	153	is covered by the GNU General Public License (GPL), version 3 or later.
94236aa4 UH	154	.SH "AUTHORS"
	155	Please see the individual source code files.
	156	.PP
	157	This manual page was written by Uwe Hermann <uwe@hermann\-uwe.de>.
	158	It is licensed under the terms of the GNU GPL (version 2 or later).