dcf77, lpc: rephrase bit string formatting

[libsigrokdecode.git] / decoders / lpc / pd.py

diff --git a/decoders/lpc/pd.py b/decoders/lpc/pd.py
index 5e838cf0e336febbcb52afa1f68baaf08dcba4e1..452e647118131428a5cebf42fcf22f0ab24f7858 100644 (file)
--- a/decoders/lpc/pd.py
+++ b/decoders/lpc/pd.py
@@ -136,10 +136,12 @@ class Decoder(srd.Decoder):
     )
 
     def __init__(self):
+        self.reset()
+
+    def reset(self):
         self.state = 'IDLE'
         self.oldlclk = -1
         self.samplenum = 0
-        self.clocknum = 0
         self.lad = -1
         self.addr = 0
         self.cur_nibble = 0
@@ -183,10 +185,10 @@ class Decoder(srd.Decoder):
     def handle_get_ct_dr(self, lad, lad_bits):
         # LAD[3:0]: Cycle type / direction field (1 clock cycle).
 
-        self.cycle_type = fields['CT_DR'][lad]
+        self.cycle_type = fields['CT_DR'].get(lad, 'Reserved / unknown')
 
         # TODO: Warning/error on invalid cycle types.
-        if self.cycle_type == 'Reserved':
+        if 'Reserved' in self.cycle_type:
             self.putb([0, ['Invalid cycle type (%s)' % lad_bits]])
 
         self.es_block = self.samplenum
@@ -252,10 +254,10 @@ class Decoder(srd.Decoder):
         # LAD[3:0]: SYNC field (1-n clock cycles).
 
         self.sync_val = lad_bits
-        self.cycle_type = fields['SYNC'][lad]
+        self.cycle_type = fields['SYNC'].get(lad, 'Reserved / unknown')
 
         # TODO: Warnings if reserved value are seen?
-        if self.cycle_type == 'Reserved':
+        if 'Reserved' in self.cycle_type:
             self.putb([0, ['SYNC, cycle %d: %s (reserved value)' % \
                            (self.synccount, self.sync_val)]])
 
@@ -315,7 +317,7 @@ class Decoder(srd.Decoder):
     def decode(self):
         while True:
             # TODO: Come up with more appropriate self.wait() conditions.
-            pins = self.wait({'skip': 1})
+            pins = self.wait()
 
             # If none of the pins changed, there's nothing to do.
             if self.oldpins == pins:
@@ -338,7 +340,7 @@ class Decoder(srd.Decoder):
             # Most (but not all) states need this.
             if self.state != 'IDLE':
                 lad = (lad3 << 3) | (lad2 << 2) | (lad1 << 1) | lad0
-                lad_bits = bin(lad)[2:].zfill(4)
+                lad_bits = '{:04b}'.format(lad)
                 # self.putb([0, ['LAD: %s' % lad_bits]])
 
             # TODO: Only memory read/write is currently supported/tested.
@@ -351,7 +353,6 @@ class Decoder(srd.Decoder):
                 self.ss_block = self.samplenum
                 self.state = 'GET START'
                 self.lad = -1
-                # self.clocknum = 0
             elif self.state == 'GET START':
                 self.handle_get_start(lad, lad_bits, lframe)
             elif self.state == 'GET CT/DR':