#include <stdio.h>
#include <errno.h>
#include <math.h>
+#include <inttypes.h>
#include <libsigrok/libsigrok.h>
#include "libsigrok-internal.h"
#include "protocol.h"
static int upload_fpga_bitstream(const struct sr_dev_inst *sdi)
{
+ struct dev_context *devc;
struct drv_context *drvc;
struct sr_usb_dev_inst *usb;
struct sr_resource bitstream;
uint32_t cmd;
uint8_t cmd_resp;
uint8_t block[4096];
- int pos, len, act_len;
+ int len, act_len;
+ unsigned int pos;
int ret;
+ unsigned int zero_pad_to = 0x2c000;
+ devc = sdi->priv;
drvc = sdi->driver->context;
usb = sdi->conn;
return ret;
}
- WL32(&cmd, 0x2b602);
+ devc->bitstream_size = (uint32_t)bitstream.size;
+ WL32(&cmd, devc->bitstream_size);
if ((ret = ctrl_out(sdi, 80, 0x00, 0, &cmd, sizeof(cmd))) != SR_OK) {
sr_err("failed to give upload init command");
sr_resource_close(drvc->sr_ctx, &bitstream);
pos = 0;
while (1) {
- len = (int)sr_resource_read(drvc->sr_ctx, &bitstream, &block, sizeof(block));
- if (len < 0) {
- sr_err("failed to read from fpga bitstream!");
- sr_resource_close(drvc->sr_ctx, &bitstream);
- return SR_ERR;
+ if (pos < bitstream.size) {
+ len = (int)sr_resource_read(drvc->sr_ctx, &bitstream, &block, sizeof(block));
+ if (len < 0) {
+ sr_err("failed to read from fpga bitstream!");
+ sr_resource_close(drvc->sr_ctx, &bitstream);
+ return SR_ERR;
+ }
+ } else {
+ // fill with zero's until zero_pad_to
+ len = zero_pad_to - pos;
+ if ((unsigned)len > sizeof(block))
+ len = sizeof(block);
+ memset(&block, 0, len);
}
if (len == 0)
break;
sr_resource_close(drvc->sr_ctx, &bitstream);
if (ret != 0)
return ret;
- sr_info("FPGA bitstream upload (%d bytes) done.", pos);
+ sr_info("FPGA bitstream upload (%" PRIu64 " bytes) done.", bitstream.size);
if ((ret = ctrl_in(sdi, 80, 0x00, 0, &cmd_resp, sizeof(cmd_resp))) != SR_OK) {
sr_err("failed to read response after FPGA bitstream upload");
return ret;
}
- if (cmd_resp != 0)
- sr_warn("after fpga bitstream upload command response is 0x%02x, expect 0", cmd_resp);
+ if (cmd_resp != 0) {
+ sr_err("after fpga bitstream upload command response is 0x%02x, expect 0!", cmd_resp);
+ return SR_ERR;
+ }
+
+ g_usleep(30000);
if ((ret = ctrl_out(sdi, 16, 0x01, 0, NULL, 0)) != SR_OK) {
sr_err("failed enable fpga");
return ret;
}
+ g_usleep(40000);
return SR_OK;
}
{
char fw_file[1024];
snprintf(fw_file, sizeof(fw_file) - 1, UC_FIRMWARE, product_id);
- return ezusb_upload_firmware(sr_ctx, dev, 0, fw_file);
+ return ezusb_upload_firmware(sr_ctx, dev, USB_CONFIGURATION, fw_file);
}
SR_PRIV int la2016_setup_acquisition(const struct sr_dev_inst *sdi)
SR_PRIV int la2016_init_device(const struct sr_dev_inst *sdi)
{
+ struct dev_context *devc;
int ret;
uint32_t i1;
uint32_t i2[2];
uint16_t state;
- uint8_t unknown_cmd1[] = { 0xa3, 0x09, 0xc9, 0x8d, 0xe7, 0xad, 0x7a, 0x62, 0xb6, 0xd1, 0xbf };
- uint8_t expected_unknown_resp1[] = { 0xa3, 0x10, 0xda, 0x66, 0x6b, 0x93, 0x5c, 0x55, 0x38, 0x50, 0x39, 0x51, 0x98, 0x86, 0x5d, 0x06, 0x7c, 0xea };
- uint8_t unknown_resp1[sizeof(expected_unknown_resp1)];
+ /* this unknown_cmd1 seems to depend on the FPGA bitstream */
+ uint8_t unknown_cmd1_340[] = { 0xa3, 0x09, 0xc9, 0x8d, 0xe7, 0xad, 0x7a, 0x62, 0xb6, 0xd1, 0xbf };
+ uint8_t unknown_cmd1_342[] = { 0xa3, 0x09, 0xc9, 0xf4, 0x32, 0x4c, 0x4d, 0xee, 0xab, 0xa0, 0xdd };
+ uint8_t expected_unknown_resp1_340[] = { 0xa3, 0x10, 0xda, 0x66, 0x6b, 0x93, 0x5c, 0x55, 0x38, 0x50, 0x39, 0x51, 0x98, 0x86, 0x5d, 0x06, 0x7c, 0xea };
+ uint8_t expected_unknown_resp1_342[] = { 0xa3, 0x10, 0xb3, 0x92, 0x7b, 0xd8, 0x6b, 0xca, 0xa5, 0xab, 0x42, 0x6e, 0xda, 0xcd, 0x9d, 0xf1, 0x31, 0x2f };
+ uint8_t unknown_resp1[sizeof(expected_unknown_resp1_340)];
+ uint8_t *expected_unknown_resp1;
+ uint8_t *unknown_cmd1;
uint8_t unknown_cmd2[] = { 0xa3, 0x01, 0xca };
uint8_t expected_unknown_resp2[] = { 0xa3, 0x08, 0x06, 0x83, 0x96, 0x29, 0x15, 0xe1, 0x92, 0x74, 0x00, 0x00 };
uint8_t unknown_resp2[sizeof(expected_unknown_resp2)];
+ devc = sdi->priv;
+
if ((ret = ctrl_in(sdi, 162, 0x20, 0, &i1, sizeof(i1))) != SR_OK) {
sr_err("failed to read i1");
return ret;
return ret;
}
- run_state(sdi);
+ if (run_state(sdi) == 0xffff) {
+ sr_err("run_state after fpga bitstream upload is 0xffff!");
+ return SR_ERR;
+ }
- if ((ret = ctrl_out(sdi, 96, 0x00, 0, unknown_cmd1, sizeof(unknown_cmd1))) != SR_OK) {
+ if (devc->bitstream_size == 0x2b602) {
+ // v3.4.0
+ unknown_cmd1 = unknown_cmd1_340;
+ expected_unknown_resp1 = expected_unknown_resp1_340;
+ } else {
+ // v3.4.2
+ if (devc->bitstream_size != 0x2b839)
+ sr_warn("the FPGA bitstream size %d is unknown. tested bistreams from vendor's version 3.4.0 and 3.4.2\n", devc->bitstream_size);
+ unknown_cmd1 = unknown_cmd1_342;
+ expected_unknown_resp1 = expected_unknown_resp1_342;
+ }
+ if ((ret = ctrl_out(sdi, 96, 0x00, 0, unknown_cmd1, sizeof(unknown_cmd1_340))) != SR_OK) {
sr_err("failed to send unknown_cmd1");
return ret;
}
return ret;
}
if (memcmp(unknown_resp1, expected_unknown_resp1, sizeof(unknown_resp1)))
- sr_dbg("unknown_cmd1 response is not as expected!");
+ sr_dbg("unknown_cmd1 response is not as expected, this is to be expected...");
state = run_state(sdi);
if (state != 0x85e9)
projects / libsigrok.git / blobdiff