2 * This file is part of the libsigrok project.
4 * Copyright (C) 2014 Bert Vermeulen <bert@biot.com>
5 * Copyright (C) 2015 Google, Inc.
6 * (Written by Alexandru Gagniuc <mrnuke@google.com> for Google, Inc.)
7 * Copyright (C) 2017,2019 Frank Stettner <frank-stettner@gmx.net>
9 * This program is free software: you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation, either version 3 of the License, or
12 * (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program. If not, see <http://www.gnu.org/licenses/>.
28 #define CH_IDX(x) (1 << x)
29 #define FREQ_DC_ONLY {0, 0, 0, 0, 0}
30 #define NO_OVP_LIMITS {0, 0, 0, 0, 0}
31 #define NO_OCP_LIMITS {0, 0, 0, 0, 0}
33 /* Agilent/Keysight N5700A series */
34 static const uint32_t agilent_n5700a_devopts[] = {
36 SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET,
37 SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET,
40 static const uint32_t agilent_n5700a_devopts_cg[] = {
41 SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
42 SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET,
43 SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
44 SR_CONF_VOLTAGE | SR_CONF_GET,
45 SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
46 SR_CONF_CURRENT | SR_CONF_GET,
47 SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
50 static const struct channel_group_spec agilent_n5700a_cg[] = {
51 { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_DC },
54 static const struct channel_spec agilent_n5767a_ch[] = {
55 { "1", { 0, 60, 0.0072, 3, 4 }, { 0, 25, 0.003, 3, 4 }, { 0, 1500 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
58 static const struct channel_spec agilent_n5763a_ch[] = {
59 { "1", { 0, 12.5, 0.0015, 3, 4 }, { 0, 120, 0.0144, 3, 4 }, { 0, 1500 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
63 * TODO: OVER_CURRENT_PROTECTION_ACTIVE status can be determined by the OC bit
64 * in STAT:QUES:EVEN?, but this is not implemented.
66 static const struct scpi_command agilent_n5700a_cmd[] = {
67 { SCPI_CMD_REMOTE, "SYST:COMM:RLST REM" },
68 { SCPI_CMD_LOCAL, "SYST:COMM:RLST LOC" },
69 { SCPI_CMD_GET_MEAS_VOLTAGE, ":MEAS:VOLT?" },
70 { SCPI_CMD_GET_MEAS_CURRENT, "MEAS:CURR?" },
71 { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT?" },
72 { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.6f" },
73 { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" },
74 { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" },
75 { SCPI_CMD_GET_OUTPUT_ENABLED, ":OUTP:STAT?" },
76 { SCPI_CMD_SET_OUTPUT_ENABLE, ":OUTP ON" },
77 { SCPI_CMD_SET_OUTPUT_DISABLE, ":OUTP OFF" },
78 { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":VOLT:PROT?" },
79 { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":VOLT:PROT %.6f" },
80 { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ENABLED, ":CURR:PROT:STAT?" },
81 { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE, ":CURR:PROT:STAT ON?"},
82 { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE, ":CURR:PROT:STAT OFF?"},
83 /* Current limit (CC mode) and OCP are set using the same command. */
84 { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR?" },
85 { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR %.6f" },
89 /* BK Precision 9130 series */
90 static const uint32_t bk_9130_devopts[] = {
92 SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET,
93 SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET,
96 static const uint32_t bk_9130_devopts_cg[] = {
97 SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
98 SR_CONF_VOLTAGE | SR_CONF_GET,
99 SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
100 SR_CONF_CURRENT | SR_CONF_GET,
101 SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
102 SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
105 static const struct channel_spec bk_9130_ch[] = {
106 { "1", { 0, 30, 0.001, 3, 3 }, { 0, 3, 0.001, 3, 3 }, { 0, 90, 0, 3, 3 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
107 { "2", { 0, 30, 0.001, 3, 3 }, { 0, 3, 0.001, 3, 3 }, { 0, 90, 0, 3, 3 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
108 { "3", { 0, 5, 0.001, 3, 3 }, { 0, 3, 0.001, 3, 3 }, { 0, 15, 0, 3, 3 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
111 static const struct channel_group_spec bk_9130_cg[] = {
112 { "1", CH_IDX(0), PPS_OVP, SR_MQFLAG_DC },
113 { "2", CH_IDX(1), PPS_OVP, SR_MQFLAG_DC },
114 { "3", CH_IDX(2), PPS_OVP, SR_MQFLAG_DC },
117 static const struct scpi_command bk_9130_cmd[] = {
118 { SCPI_CMD_REMOTE, "SYST:REMOTE" },
119 { SCPI_CMD_LOCAL, "SYST:LOCAL" },
120 { SCPI_CMD_SELECT_CHANNEL, ":INST:NSEL %s" },
121 { SCPI_CMD_GET_MEAS_VOLTAGE, ":MEAS:VOLT?" },
122 { SCPI_CMD_GET_MEAS_CURRENT, ":MEAS:CURR?" },
123 { SCPI_CMD_GET_MEAS_POWER, ":MEAS:POWER?" },
124 { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT?" },
125 { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.6f" },
126 { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" },
127 { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" },
128 { SCPI_CMD_GET_OUTPUT_ENABLED, ":OUTP?" },
129 { SCPI_CMD_SET_OUTPUT_ENABLE, ":OUTP 1" },
130 { SCPI_CMD_SET_OUTPUT_DISABLE, ":OUTP 0" },
131 { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:PROT?" },
132 { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:PROT %.6f" },
136 /* Chroma 61600 series AC source */
137 static const uint32_t chroma_61604_devopts[] = {
139 SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET,
140 SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET,
143 static const uint32_t chroma_61604_devopts_cg[] = {
144 SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
145 SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
146 SR_CONF_VOLTAGE | SR_CONF_GET,
147 SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
148 SR_CONF_OUTPUT_FREQUENCY | SR_CONF_GET,
149 SR_CONF_OUTPUT_FREQUENCY_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
150 SR_CONF_CURRENT | SR_CONF_GET,
151 SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
154 static const struct channel_spec chroma_61604_ch[] = {
155 { "1", { 0, 300, 0.1, 1, 1 }, { 0, 16, 0.1, 2, 2 }, { 0, 2000, 0, 1, 1 }, { 1.0, 1000.0, 0.01 }, NO_OVP_LIMITS, NO_OCP_LIMITS },
158 static const struct channel_group_spec chroma_61604_cg[] = {
159 { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_AC },
162 static const struct scpi_command chroma_61604_cmd[] = {
163 { SCPI_CMD_REMOTE, "SYST:REM" },
164 { SCPI_CMD_LOCAL, "SYST:LOC" },
165 { SCPI_CMD_GET_MEAS_VOLTAGE, ":FETC:VOLT:ACDC?" },
166 { SCPI_CMD_GET_MEAS_FREQUENCY, ":FETC:FREQ?" },
167 { SCPI_CMD_GET_MEAS_CURRENT, ":FETC:CURR:AC?" },
168 { SCPI_CMD_GET_MEAS_POWER, ":FETC:POW:AC?" },
169 { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT:AC?" },
170 { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT:AC %.1f" },
171 { SCPI_CMD_GET_FREQUENCY_TARGET, ":SOUR:FREQ?" },
172 { SCPI_CMD_SET_FREQUENCY_TARGET, ":SOUR:FREQ %.2f" },
173 { SCPI_CMD_GET_OUTPUT_ENABLED, ":OUTP?" },
174 { SCPI_CMD_SET_OUTPUT_ENABLE, ":OUTP ON" },
175 { SCPI_CMD_SET_OUTPUT_DISABLE, ":OUTP OFF" },
176 { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:LIM:AC?" },
177 { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:LIM:AC %.1f" },
178 /* This is not a current limit mode. It is overcurrent protection. */
179 { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR:LIM?" },
180 { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR:LIM %.2f" },
184 /* Chroma 62000 series DC source */
185 static const uint32_t chroma_62000_devopts[] = {
187 SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET,
188 SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET,
191 static const uint32_t chroma_62000_devopts_cg[] = {
192 SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
193 SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
194 SR_CONF_VOLTAGE | SR_CONF_GET,
195 SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
196 SR_CONF_CURRENT | SR_CONF_GET,
197 SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
198 SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
201 static const struct channel_group_spec chroma_62000_cg[] = {
202 { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_DC },
205 static const struct scpi_command chroma_62000_cmd[] = {
206 { SCPI_CMD_REMOTE, ":CONF:REM ON" },
207 { SCPI_CMD_LOCAL, ":CONF:REM OFF" },
208 { SCPI_CMD_BEEPER, ":CONF:BEEP?" },
209 { SCPI_CMD_BEEPER_ENABLE, ":CONF:BEEP ON" },
210 { SCPI_CMD_BEEPER_DISABLE, ":CONF:BEEP OFF" },
211 { SCPI_CMD_GET_MEAS_VOLTAGE, ":MEAS:VOLT?" },
212 { SCPI_CMD_GET_MEAS_CURRENT, ":MEAS:CURR?" },
213 { SCPI_CMD_GET_MEAS_POWER, ":MEAS:POW?" },
214 { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT?" },
215 { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.2f" },
216 { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" },
217 { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" },
218 { SCPI_CMD_GET_OUTPUT_ENABLED, ":CONF:OUTP?" },
219 { SCPI_CMD_SET_OUTPUT_ENABLE, ":CONF:OUTP ON" },
220 { SCPI_CMD_SET_OUTPUT_DISABLE, ":CONF:OUTP OFF" },
221 { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:PROT:HIGH?" },
222 { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:PROT:HIGH %.6f" },
223 { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR:PROT:HIGH?" },
224 { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR:PROT:HIGH %.6f" },
228 static int chroma_62000p_probe_channels(struct sr_dev_inst *sdi,
229 struct sr_scpi_hw_info *hw_info,
230 struct channel_spec **channels, unsigned int *num_channels,
231 struct channel_group_spec **channel_groups,
232 unsigned int *num_channel_groups)
234 unsigned int volts, amps, watts;
235 struct channel_spec *channel;
239 sscanf(hw_info->model, "620%uP-%u-%u", &watts, &volts, &s);
241 sr_dbg("Found device rated for %d V, %d A and %d W", volts, amps, watts);
244 sr_err("Probed max voltage of %u V is out of spec.", volts);
249 sr_err("Probed max current of %u A is out of spec.", amps);
254 sr_err("Probed max power of %u W is out of spec.", watts);
258 channel = g_malloc0(sizeof(struct channel_spec));
260 channel->voltage[0] = channel->current[0] = channel->power[0] = 0.0;
261 channel->voltage[1] = volts;
262 channel->current[1] = amps;
263 channel->power[1] = watts;
264 channel->voltage[2] = channel->current[2] = 0.01;
265 channel->voltage[3] = channel->voltage[4] = 3;
266 channel->current[3] = channel->current[4] = 4;
270 *channel_groups = g_malloc(sizeof(struct channel_group_spec));
271 **channel_groups = chroma_62000_cg[0];
272 *num_channel_groups = 1;
277 /* Rigol DP700 series */
278 static const uint32_t rigol_dp700_devopts[] = {
280 SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET,
281 SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET,
284 static const uint32_t rigol_dp700_devopts_cg[] = {
285 SR_CONF_REGULATION | SR_CONF_GET,
286 SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET,
287 SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET,
288 SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
289 SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET,
290 SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE | SR_CONF_GET,
291 SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
292 SR_CONF_VOLTAGE | SR_CONF_GET,
293 SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
294 SR_CONF_CURRENT | SR_CONF_GET,
295 SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
296 SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
299 static const struct channel_spec rigol_dp711_ch[] = {
300 { "1", { 0, 30, 0.01, 3, 3 }, { 0, 5, 0.01, 3, 3 }, { 0, 150, 0, 3, 3 }, FREQ_DC_ONLY, { 0.01, 33, 0.01}, { 0.01, 5.5, 0.01 } },
303 static const struct channel_spec rigol_dp712_ch[] = {
304 { "1", { 0, 50, 0.01, 3, 3 }, { 0, 3, 0.01, 3, 3 }, { 0, 150, 0, 3, 3 }, FREQ_DC_ONLY, { 0.01, 55, 0.01}, { 0.01, 3.3, 0.01 } },
307 static const struct channel_group_spec rigol_dp700_cg[] = {
308 { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_DC },
311 /* Same as the DP800 series, except for the missing :SYST:OTP* commands. */
312 static const struct scpi_command rigol_dp700_cmd[] = {
313 { SCPI_CMD_REMOTE, "SYST:REMOTE" },
314 { SCPI_CMD_LOCAL, "SYST:LOCAL" },
315 { SCPI_CMD_BEEPER, "SYST:BEEP:STAT?" },
316 { SCPI_CMD_BEEPER_ENABLE, "SYST:BEEP:STAT ON" },
317 { SCPI_CMD_BEEPER_DISABLE, "SYST:BEEP:STAT OFF" },
318 { SCPI_CMD_SELECT_CHANNEL, ":INST:NSEL %s" },
319 { SCPI_CMD_GET_MEAS_VOLTAGE, ":MEAS:VOLT?" },
320 { SCPI_CMD_GET_MEAS_CURRENT, ":MEAS:CURR?" },
321 { SCPI_CMD_GET_MEAS_POWER, ":MEAS:POWE?" },
322 { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT?" },
323 { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.6f" },
324 { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" },
325 { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" },
326 { SCPI_CMD_GET_OUTPUT_ENABLED, ":OUTP?" },
327 { SCPI_CMD_SET_OUTPUT_ENABLE, ":OUTP ON" },
328 { SCPI_CMD_SET_OUTPUT_DISABLE, ":OUTP OFF" },
329 { SCPI_CMD_GET_OUTPUT_REGULATION, ":OUTP:MODE?" },
330 { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ENABLED, ":OUTP:OVP?" },
331 { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_ENABLE, ":OUTP:OVP ON" },
332 { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_DISABLE, ":OUTP:OVP OFF" },
333 { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, ":OUTP:OVP:QUES?" },
334 { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":OUTP:OVP:VAL?" },
335 { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":OUTP:OVP:VAL %.6f" },
336 { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ENABLED, ":OUTP:OCP?" },
337 { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE, ":OUTP:OCP:STAT ON" },
338 { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE, ":OUTP:OCP:STAT OFF" },
339 { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ACTIVE, ":OUTP:OCP:QUES?" },
340 { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, ":OUTP:OCP:VAL?" },
341 { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, ":OUTP:OCP:VAL %.6f" },
345 /* Rigol DP800 series */
346 static const uint32_t rigol_dp800_devopts[] = {
348 SR_CONF_OVER_TEMPERATURE_PROTECTION | SR_CONF_GET | SR_CONF_SET,
349 SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET,
350 SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET,
353 static const uint32_t rigol_dp800_devopts_cg[] = {
354 SR_CONF_REGULATION | SR_CONF_GET,
355 SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET,
356 SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET,
357 SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
358 SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET,
359 SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE | SR_CONF_GET,
360 SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
361 SR_CONF_VOLTAGE | SR_CONF_GET,
362 SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
363 SR_CONF_CURRENT | SR_CONF_GET,
364 SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
365 SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
368 static const struct channel_spec rigol_dp821a_ch[] = {
369 { "1", { 0, 60, 0.001, 3, 3 }, { 0, 1, 0.0001, 4, 4 }, { 0, 60, 0, 3, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
370 { "2", { 0, 8, 0.001, 3, 3 }, { 0, 10, 0.001, 3, 3 }, { 0, 80, 0, 3, 3 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
373 static const struct channel_spec rigol_dp831_ch[] = {
374 { "1", { 0, 8, 0.001, 3, 4 }, { 0, 5, 0.0003, 3, 4 }, { 0, 40, 0, 3, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
375 { "2", { 0, 30, 0.001, 3, 4 }, { 0, 2, 0.0001, 3, 4 }, { 0, 60, 0, 3, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
376 { "3", { 0, -30, 0.001, 3, 4 }, { 0, 2, 0.0001, 3, 4 }, { 0, 60, 0, 3, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
379 static const struct channel_spec rigol_dp832_ch[] = {
380 { "1", { 0, 30, 0.001, 3, 4 }, { 0, 3, 0.001, 3, 4 }, { 0, 90, 0, 3, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
381 { "2", { 0, 30, 0.001, 3, 4 }, { 0, 3, 0.001, 3, 4 }, { 0, 90, 0, 3, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
382 { "3", { 0, 5, 0.001, 3, 4 }, { 0, 3, 0.001, 3, 4 }, { 0, 90, 0, 3, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
385 static const struct channel_group_spec rigol_dp820_cg[] = {
386 { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_DC },
387 { "2", CH_IDX(1), PPS_OVP | PPS_OCP, SR_MQFLAG_DC },
390 static const struct channel_group_spec rigol_dp830_cg[] = {
391 { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_DC },
392 { "2", CH_IDX(1), PPS_OVP | PPS_OCP, SR_MQFLAG_DC },
393 { "3", CH_IDX(2), PPS_OVP | PPS_OCP, SR_MQFLAG_DC },
396 static const struct scpi_command rigol_dp800_cmd[] = {
397 { SCPI_CMD_REMOTE, "SYST:REMOTE" },
398 { SCPI_CMD_LOCAL, "SYST:LOCAL" },
399 { SCPI_CMD_BEEPER, "SYST:BEEP:STAT?" },
400 { SCPI_CMD_BEEPER_ENABLE, "SYST:BEEP:STAT ON" },
401 { SCPI_CMD_BEEPER_DISABLE, "SYST:BEEP:STAT OFF" },
402 { SCPI_CMD_SELECT_CHANNEL, ":INST:NSEL %s" },
403 { SCPI_CMD_GET_MEAS_VOLTAGE, ":MEAS:VOLT?" },
404 { SCPI_CMD_GET_MEAS_CURRENT, ":MEAS:CURR?" },
405 { SCPI_CMD_GET_MEAS_POWER, ":MEAS:POWE?" },
406 { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT?" },
407 { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.6f" },
408 { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" },
409 { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" },
410 { SCPI_CMD_GET_OUTPUT_ENABLED, ":OUTP?" },
411 { SCPI_CMD_SET_OUTPUT_ENABLE, ":OUTP ON" },
412 { SCPI_CMD_SET_OUTPUT_DISABLE, ":OUTP OFF" },
413 { SCPI_CMD_GET_OUTPUT_REGULATION, ":OUTP:MODE?" },
414 { SCPI_CMD_GET_OVER_TEMPERATURE_PROTECTION, ":SYST:OTP?" },
415 { SCPI_CMD_SET_OVER_TEMPERATURE_PROTECTION_ENABLE, ":SYST:OTP ON" },
416 { SCPI_CMD_SET_OVER_TEMPERATURE_PROTECTION_DISABLE, ":SYST:OTP OFF" },
417 { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ENABLED, ":OUTP:OVP?" },
418 { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_ENABLE, ":OUTP:OVP ON" },
419 { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_DISABLE, ":OUTP:OVP OFF" },
420 { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, ":OUTP:OVP:QUES?" },
421 { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":OUTP:OVP:VAL?" },
422 { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":OUTP:OVP:VAL %.6f" },
423 { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ENABLED, ":OUTP:OCP?" },
424 { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE, ":OUTP:OCP:STAT ON" },
425 { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE, ":OUTP:OCP:STAT OFF" },
426 { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ACTIVE, ":OUTP:OCP:QUES?" },
427 { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, ":OUTP:OCP:VAL?" },
428 { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, ":OUTP:OCP:VAL %.6f" },
432 /* HP 663xA series */
433 static const uint32_t hp_6630a_devopts[] = {
435 SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET,
436 SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET,
439 static const uint32_t hp_6630a_devopts_cg[] = {
440 SR_CONF_ENABLED | SR_CONF_SET,
441 SR_CONF_VOLTAGE | SR_CONF_GET,
442 SR_CONF_CURRENT | SR_CONF_GET,
443 SR_CONF_VOLTAGE_TARGET | SR_CONF_SET | SR_CONF_LIST,
444 SR_CONF_CURRENT_LIMIT | SR_CONF_SET | SR_CONF_LIST,
445 SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET,
446 SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_SET | SR_CONF_LIST,
447 SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_SET,
448 SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE | SR_CONF_GET,
449 SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE | SR_CONF_GET,
450 SR_CONF_REGULATION | SR_CONF_GET,
453 static const struct channel_spec hp_6632a_ch[] = {
454 { "1", { 0, 20.475, 0.005, 3, 4 }, { 0, 5.1188, 0.00125, 4, 5 }, { 0, 104.80743 }, FREQ_DC_ONLY, { 0, 22, 0.1 }, NO_OCP_LIMITS },
457 static const struct channel_spec hp_6633a_ch[] = {
458 { "1", { 0, 51.188, 0.0125, 3, 4 }, { 0, 2.0475, 0.0005, 4, 5 }, { 0, 104.80743 }, FREQ_DC_ONLY, { 0, 55, 0.25 }, NO_OCP_LIMITS },
461 static const struct channel_spec hp_6634a_ch[] = {
462 { "1", { 0, 102.38, 0.025, 3, 4 }, { 0, 1.0238, 0.00025, 4, 5 }, { 0, 104.81664 }, FREQ_DC_ONLY, { 0, 110, 0.5 }, NO_OCP_LIMITS },
465 static const struct channel_group_spec hp_6630a_cg[] = {
466 { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_DC },
469 static const struct scpi_command hp_6630a_cmd[] = {
470 { SCPI_CMD_SET_OUTPUT_ENABLE, "OUT 1" },
471 { SCPI_CMD_SET_OUTPUT_DISABLE, "OUT 0" },
472 { SCPI_CMD_GET_MEAS_VOLTAGE, "VOUT?" },
473 { SCPI_CMD_GET_MEAS_CURRENT, "IOUT?" },
474 { SCPI_CMD_SET_VOLTAGE_TARGET, "VSET %.4f" },
475 { SCPI_CMD_SET_CURRENT_LIMIT, "ISET %.4f" },
476 { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, "STS?" },
477 { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "OVSET %.4f" },
478 { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE, "OCP 1" },
479 { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE, "OCP 0" },
480 { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ACTIVE, "STS?" },
481 { SCPI_CMD_GET_OVER_TEMPERATURE_PROTECTION_ACTIVE, "STS?" },
482 { SCPI_CMD_GET_OUTPUT_REGULATION, "STS?" },
486 static int hp_6630a_init_aquisition(const struct sr_dev_inst *sdi)
488 struct sr_scpi_dev_inst *scpi;
494 * Monitor CV (1), CC+ (2), UR (4), OVP (8), OTP (16), OCP (64) and
495 * CC- (256) bits of the Status Register for the FAULT? query.
497 ret = sr_scpi_send(scpi, "UNMASK 607");
504 static int hp_6630a_update_status(const struct sr_dev_inst *sdi)
506 struct sr_scpi_dev_inst *scpi;
509 gboolean cv, cc_pos, unreg, cc_neg;
510 gboolean regulation_changed;
516 * Use the FAULT register (only 0->1 transitions), this way multiple set
517 * regulation bits in the STS/ASTS registers are ignored. In rare cases
518 * we will miss some changes (1->0 transitions, e.g. no regulation at all),
519 * but SPS/ASPS doesn't work either, unless all states are stored and
520 * compared to the states in STS/ASTS.
521 * TODO: Use SPoll or SRQ when SCPI over GPIB is used.
523 ret = sr_scpi_get_int(scpi, "FAULT?", &fault);
528 if (fault & (1 << 3))
529 sr_session_send_meta(sdi, SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE,
530 g_variant_new_boolean(fault & (1 << 3)));
533 if (fault & (1 << 6))
534 sr_session_send_meta(sdi, SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE,
535 g_variant_new_boolean(fault & (1 << 6)));
538 if (fault & (1 << 4))
539 sr_session_send_meta(sdi, SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE,
540 g_variant_new_boolean(fault & (1 << 4)));
543 cv = (fault & (1 << 0));
544 regulation_changed = (fault & (1 << 0));
546 cc_pos = (fault & (1 << 1));
547 regulation_changed = (fault & (1 << 1)) | regulation_changed;
549 unreg = (fault & (1 << 2));
550 regulation_changed = (fault & (1 << 2)) | regulation_changed;
552 cc_neg = (fault & (1 << 9));
553 regulation_changed = (fault & (1 << 9)) | regulation_changed;
555 if (regulation_changed) {
556 if (cv && !cc_pos && !cc_neg &&!unreg)
558 else if (cc_pos && !cv && !cc_neg && !unreg)
560 else if (cc_neg && !cv && !cc_pos && !unreg)
562 else if (unreg && !cv && !cc_pos && !cc_neg)
564 else if (!cv && !cc_pos && !cc_neg &&!unreg)
567 sr_dbg("Undefined regulation for HP 66xxA "
568 "(CV=%i, CC+=%i, CC-=%i, UR=%i).",
569 cv, cc_pos, cc_neg, unreg);
572 sr_session_send_meta(sdi, SR_CONF_REGULATION,
573 g_variant_new_string(regulation));
579 /* HP 663xB series */
580 static const uint32_t hp_6630b_devopts[] = {
582 SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET,
583 SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET,
586 static const uint32_t hp_6630b_devopts_cg[] = {
587 SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
588 SR_CONF_VOLTAGE | SR_CONF_GET,
589 SR_CONF_CURRENT | SR_CONF_GET,
590 SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
591 SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
592 SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET,
593 SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
594 SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET,
595 SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE | SR_CONF_GET,
596 SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE | SR_CONF_GET,
597 SR_CONF_REGULATION | SR_CONF_GET,
600 static const struct channel_spec hp_6611c_ch[] = {
601 { "1", { 0, 8.19, 0.002, 3, 4 }, { 0, 5.1188, 0.00125, 4, 5 }, { 0, 41.92297 }, FREQ_DC_ONLY, { 0, 12, 0.06 }, NO_OCP_LIMITS },
604 static const struct channel_spec hp_6612c_ch[] = {
605 { "1", { 0, 20.475, 0.005, 3, 4 }, { 0, 2.0475, 0.0005, 4, 5 }, { 0, 41.92256 }, FREQ_DC_ONLY, { 0, 22, 0.1 }, NO_OCP_LIMITS },
608 static const struct channel_spec hp_6613c_ch[] = {
609 { "1", { 0, 51.188, 0.0125, 3, 4 }, { 0, 1.0238, 0.00025, 4, 5 }, { 0, 52.40627 }, FREQ_DC_ONLY, { 0, 55, 0.25 }, NO_OCP_LIMITS },
612 static const struct channel_spec hp_6614c_ch[] = {
613 { "1", { 0, 102.38, 0.025, 3, 4 }, { 0, 0.5118, 0.000125, 4, 5 }, { 0, 52.39808 }, FREQ_DC_ONLY, { 0, 110, 0.5 }, NO_OCP_LIMITS },
616 static const struct channel_spec hp_6631b_ch[] = {
617 { "1", { 0, 8.19, 0.002, 3, 4 }, { 0, 10.237, 0.00263, 4, 5 }, { 0, 83.84103 }, FREQ_DC_ONLY, { 0, 12, 0.06 }, NO_OCP_LIMITS },
620 static const struct channel_spec hp_6632b_ch[] = {
621 { "1", { 0, 20.475, 0.005, 3, 4 }, { 0, 5.1188, 0.00132, 4, 5 }, { 0, 104.80743 }, FREQ_DC_ONLY, { 0, 22, 0.1 }, NO_OCP_LIMITS },
624 static const struct channel_spec hp_66332a_ch[] = {
625 { "1", { 0, 20.475, 0.005, 3, 4 }, { 0, 5.1188, 0.00132, 4, 5 }, { 0, 104.80743 }, FREQ_DC_ONLY, { 0, 22, 0.1 }, NO_OCP_LIMITS },
628 static const struct channel_spec hp_6633b_ch[] = {
629 { "1", { 0, 51.188, 0.0125, 3, 4 }, { 0, 2.0475, 0.000526, 4, 5 }, { 0, 104.80743 }, FREQ_DC_ONLY, { 0, 55, 0.25 }, NO_OCP_LIMITS },
632 static const struct channel_spec hp_6634b_ch[] = {
633 { "1", { 0, 102.38, 0.025, 3, 4 }, { 0, 1.0238, 0.000263, 4, 5 }, { 0, 104.81664 }, FREQ_DC_ONLY, { 0, 110, 0.5 }, NO_OCP_LIMITS },
636 static const struct channel_group_spec hp_6630b_cg[] = {
637 { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_DC },
640 static const struct scpi_command hp_6630b_cmd[] = {
642 * SCPI_CMD_REMOTE and SCPI_CMD_LOCAL are not used when GPIB is used,
643 * otherwise the device will report (non critical) error 602.
645 { SCPI_CMD_REMOTE, "SYST:REM" },
646 { SCPI_CMD_LOCAL, "SYST:LOC" },
647 { SCPI_CMD_GET_OUTPUT_ENABLED, "OUTP:STAT?" },
648 { SCPI_CMD_SET_OUTPUT_ENABLE, "OUTP:STAT ON" },
649 { SCPI_CMD_SET_OUTPUT_DISABLE, "OUTP:STAT OFF" },
650 { SCPI_CMD_GET_MEAS_VOLTAGE, ":MEAS:VOLT?" },
651 { SCPI_CMD_GET_MEAS_CURRENT, ":MEAS:CURR?" },
652 { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT?" },
653 { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.6f" },
654 { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" },
655 { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" },
656 { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ENABLED, ":CURR:PROT:STAT?" },
657 { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE, ":CURR:PROT:STAT 1" },
658 { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE, ":CURR:PROT:STAT 0" },
659 { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ACTIVE, "STAT:QUES:COND?" },
660 { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, "STAT:QUES:COND?" },
661 { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":VOLT:PROT?" },
662 { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":VOLT:PROT %.6f" },
663 { SCPI_CMD_GET_OVER_TEMPERATURE_PROTECTION_ACTIVE, "STAT:QUES:COND?" },
664 { SCPI_CMD_GET_OUTPUT_REGULATION, "STAT:OPER:COND?" },
668 static int hp_6630b_init_aquisition(const struct sr_dev_inst *sdi)
670 struct sr_scpi_dev_inst *scpi;
676 * Monitor CV (256), CC+ (1024) and CC- (2048) bits of the
677 * Operational Status Register.
678 * Use both positive and negative transitions of the status bits.
680 ret = sr_scpi_send(scpi, "STAT:OPER:PTR 3328;NTR 3328;ENAB 3328");
685 * Monitor OVP (1), OCP (2), OTP (16) and Unreg (1024) bits of the
686 * Questionable Status Register.
687 * Use both positive and negative transitions of the status bits.
689 ret = sr_scpi_send(scpi, "STAT:QUES:PTR 1043;NTR 1043;ENAB 1043");
694 * Service Request Enable Register set for Operational Status Register
695 * bits (128) and Questionable Status Register bits (8).
696 * This masks the Status Register generating a SRQ/RQS. Not implemented yet!
699 ret = sr_scpi_send(scpi, "*SRE 136");
707 static int hp_6630b_update_status(const struct sr_dev_inst *sdi)
709 struct sr_scpi_dev_inst *scpi;
712 int ques_even, ques_cond;
713 int oper_even, oper_cond;
714 gboolean output_enabled;
715 gboolean unreg, cv, cc_pos, cc_neg;
716 gboolean regulation_changed;
725 regulation_changed = FALSE;
728 * Use SPoll when SCPI uses GPIB as transport layer.
729 * SPoll is approx. twice as fast as a normal GPIB write + read would be!
734 if (scpi->transport == SCPI_TRANSPORT_LIBGPIB) {
735 ret = sr_scpi_gpib_spoll(scpi, &spoll_buf);
738 stb = (uint8_t)spoll_buf;
742 ret = sr_scpi_get_int(scpi, "*STB?", &stb);
749 /* Questionable status summary bit */
750 if (stb & (1 << 3)) {
751 /* Read the event register to clear it! */
752 ret = sr_scpi_get_int(scpi, "STAT:QUES:EVEN?", &ques_even);
755 /* Now get the values. */
756 ret = sr_scpi_get_int(scpi, "STAT:QUES:COND?", &ques_cond);
761 if (ques_even & (1 << 0))
762 sr_session_send_meta(sdi, SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE,
763 g_variant_new_boolean(ques_cond & (1 << 0)));
766 if (ques_even & (1 << 1))
767 sr_session_send_meta(sdi, SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE,
768 g_variant_new_boolean(ques_cond & (1 << 1)));
771 if (ques_even & (1 << 4))
772 sr_session_send_meta(sdi, SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE,
773 g_variant_new_boolean(ques_cond & (1 << 4)));
776 unreg = (ques_cond & (1 << 10));
777 regulation_changed = (ques_even & (1 << 10)) | regulation_changed;
780 * Check if output state has changed, due to one of the
781 * questionable states changed.
782 * NOTE: The output state is send even if it hasn't changed, but that
783 * only happends rarely.
785 ret = sr_scpi_get_bool(scpi, "OUTP:STAT?", &output_enabled);
788 sr_session_send_meta(sdi, SR_CONF_ENABLED,
789 g_variant_new_boolean(output_enabled));
792 /* Operation status summary bit */
793 if (stb & (1 << 7)) {
794 /* Read the event register to clear it! */
795 ret = sr_scpi_get_int(scpi, "STAT:OPER:EVEN?", &oper_even);
798 /* Now get the values. */
799 ret = sr_scpi_get_int(scpi, "STAT:OPER:COND?", &oper_cond);
804 cv = (oper_cond & (1 << 8));
805 regulation_changed = (oper_even & (1 << 8)) | regulation_changed;
807 cc_pos = (oper_cond & (1 << 10));
808 regulation_changed = (oper_even & (1 << 10)) | regulation_changed;
810 cc_neg = (oper_cond & (1 << 11));
811 regulation_changed = (oper_even & (1 << 11)) | regulation_changed;
814 if (regulation_changed) {
815 if (cv && !cc_pos && !cc_neg &&!unreg)
817 else if (cc_pos && !cv && !cc_neg && !unreg)
819 else if (cc_neg && !cv && !cc_pos && !unreg)
821 else if (unreg && !cv && !cc_pos && !cc_neg)
823 else if (!cv && !cc_pos && !cc_neg &&!unreg)
824 /* This happends in case of OCP active */
827 /* This happends from time to time (CV and CC+ active). */
828 sr_dbg("Undefined regulation for HP 66xxB "
829 "(CV=%i, CC+=%i, CC-=%i, UR=%i).",
830 cv, cc_pos, cc_neg, unreg);
833 sr_session_send_meta(sdi, SR_CONF_REGULATION,
834 g_variant_new_string(regulation));
840 /* Philips/Fluke PM2800 series */
841 static const uint32_t philips_pm2800_devopts[] = {
843 SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET,
844 SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET,
847 static const uint32_t philips_pm2800_devopts_cg[] = {
848 SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
849 SR_CONF_VOLTAGE | SR_CONF_GET,
850 SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
851 SR_CONF_CURRENT | SR_CONF_GET,
852 SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
853 SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET,
854 SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
855 SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET,
856 SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE | SR_CONF_GET,
857 SR_CONF_REGULATION | SR_CONF_GET,
860 enum philips_pm2800_modules {
861 PM2800_MOD_30V_10A = 1,
869 static const struct philips_pm2800_module_spec {
870 /* Min, max, programming resolution. */
874 } philips_pm2800_module_specs[] = {
875 /* Autoranging modules. */
876 [PM2800_MOD_30V_10A] = { { 0, 30, 0.0075, 2, 4 }, { 0, 10, 0.0025, 2, 4 }, { 0, 60 } },
877 [PM2800_MOD_60V_5A] = { { 0, 60, 0.015, 2, 3 }, { 0, 5, 0.00125, 2, 5 }, { 0, 60 } },
878 [PM2800_MOD_60V_10A] = { { 0, 60, 0.015, 2, 3 }, { 0, 10, 0.0025, 2, 5 }, { 0, 120 } },
879 /* Linear modules. */
880 [PM2800_MOD_8V_15A] = { { 0, 8, 0.002, 3, 3 }, { -15, 15, 0.00375, 3, 5 }, { 0, 120 } },
881 [PM2800_MOD_60V_2A] = { { 0, 60, 0.015, 2, 3 }, { -2, 2, 0.0005, 3, 4 }, { 0, 120 } },
882 [PM2800_MOD_120V_1A] = { { 0, 120, 0.030, 2, 2 }, { -1, 1, 0.00025, 3, 5 }, { 0, 120 } },
885 static const struct philips_pm2800_model {
886 unsigned int chassis;
887 unsigned int num_modules;
889 unsigned int modules[3];
890 } philips_pm2800_matrix[] = {
891 /* Autoranging chassis. */
892 { 1, 1, 0, { PM2800_MOD_30V_10A, 0, 0 } },
893 { 1, 1, 1, { PM2800_MOD_60V_5A, 0, 0 } },
894 { 1, 2, 0, { PM2800_MOD_30V_10A, PM2800_MOD_30V_10A, 0 } },
895 { 1, 2, 1, { PM2800_MOD_60V_5A, PM2800_MOD_60V_5A, 0 } },
896 { 1, 2, 2, { PM2800_MOD_30V_10A, PM2800_MOD_60V_5A, 0 } },
897 { 1, 2, 3, { PM2800_MOD_30V_10A, PM2800_MOD_60V_10A, 0 } },
898 { 1, 2, 4, { PM2800_MOD_60V_5A, PM2800_MOD_60V_10A, 0 } },
899 { 1, 3, 0, { PM2800_MOD_30V_10A, PM2800_MOD_30V_10A, PM2800_MOD_30V_10A } },
900 { 1, 3, 1, { PM2800_MOD_60V_5A, PM2800_MOD_60V_5A, PM2800_MOD_60V_5A } },
901 { 1, 3, 2, { PM2800_MOD_30V_10A, PM2800_MOD_30V_10A, PM2800_MOD_60V_5A } },
902 { 1, 3, 3, { PM2800_MOD_30V_10A, PM2800_MOD_60V_5A, PM2800_MOD_60V_5A } },
903 /* Linear chassis. */
904 { 3, 1, 0, { PM2800_MOD_60V_2A, 0, 0 } },
905 { 3, 1, 1, { PM2800_MOD_120V_1A, 0, 0 } },
906 { 3, 1, 2, { PM2800_MOD_8V_15A, 0, 0 } },
907 { 3, 2, 0, { PM2800_MOD_60V_2A, 0, 0 } },
908 { 3, 2, 1, { PM2800_MOD_120V_1A, 0, 0 } },
909 { 3, 2, 2, { PM2800_MOD_60V_2A, PM2800_MOD_120V_1A, 0 } },
910 { 3, 2, 3, { PM2800_MOD_8V_15A, PM2800_MOD_8V_15A, 0 } },
913 static const char *philips_pm2800_names[] = { "1", "2", "3" };
915 static int philips_pm2800_probe_channels(struct sr_dev_inst *sdi,
916 struct sr_scpi_hw_info *hw_info,
917 struct channel_spec **channels, unsigned int *num_channels,
918 struct channel_group_spec **channel_groups, unsigned int *num_channel_groups)
920 const struct philips_pm2800_model *model;
921 const struct philips_pm2800_module_spec *spec;
922 unsigned int chassis, num_modules, set, module, m, i;
927 * The model number as reported by *IDN? looks like e.g. PM2813/11,
928 * Where "PM28" is fixed, followed by the chassis code (1 = autoranging,
929 * 3 = linear series) and the number of modules: 1-3 for autoranging,
931 * After the slash, the first digit denotes the module set. The
932 * digit after that denotes front (5) or rear (1) binding posts.
934 chassis = hw_info->model[4] - 0x30;
935 num_modules = hw_info->model[5] - 0x30;
936 set = hw_info->model[7] - 0x30;
937 for (m = 0; m < ARRAY_SIZE(philips_pm2800_matrix); m++) {
938 model = &philips_pm2800_matrix[m];
939 if (model->chassis == chassis && model->num_modules == num_modules
940 && model->set == set)
943 if (m == ARRAY_SIZE(philips_pm2800_matrix)) {
944 sr_dbg("Model %s not found in matrix.", hw_info->model);
948 sr_dbg("Found %d output channel%s:", num_modules, num_modules > 1 ? "s" : "");
949 *channels = g_malloc0(sizeof(struct channel_spec) * num_modules);
950 *channel_groups = g_malloc0(sizeof(struct channel_group_spec) * num_modules);
951 for (i = 0; i < num_modules; i++) {
952 module = model->modules[i];
953 spec = &philips_pm2800_module_specs[module];
954 sr_dbg("output %d: %.0f - %.0fV, %.0f - %.0fA, %.0f - %.0fW", i + 1,
955 spec->voltage[0], spec->voltage[1],
956 spec->current[0], spec->current[1],
957 spec->power[0], spec->power[1]);
958 (*channels)[i].name = (char *)philips_pm2800_names[i];
959 memcpy(&((*channels)[i].voltage), spec, sizeof(double) * 15);
960 (*channel_groups)[i].name = (char *)philips_pm2800_names[i];
961 (*channel_groups)[i].channel_index_mask = 1 << i;
962 (*channel_groups)[i].features = PPS_OTP | PPS_OVP | PPS_OCP;
963 (*channel_groups)[i].mqflags = SR_MQFLAG_DC;
965 *num_channels = *num_channel_groups = num_modules;
970 static const struct scpi_command philips_pm2800_cmd[] = {
971 { SCPI_CMD_SELECT_CHANNEL, ":INST:NSEL %s" },
972 { SCPI_CMD_GET_MEAS_VOLTAGE, ":MEAS:VOLT?" },
973 { SCPI_CMD_GET_MEAS_CURRENT, ":MEAS:CURR?" },
974 { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT?" },
975 { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.6f" },
976 { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" },
977 { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" },
978 { SCPI_CMD_GET_OUTPUT_ENABLED, ":OUTP?" },
979 { SCPI_CMD_SET_OUTPUT_ENABLE, ":OUTP ON" },
980 { SCPI_CMD_SET_OUTPUT_DISABLE, ":OUTP OFF" },
981 { SCPI_CMD_GET_OUTPUT_REGULATION, ":SOUR:FUNC:MODE?" },
982 { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, ":SOUR:VOLT:PROT:TRIP?" },
983 { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:PROT:LEV?" },
984 { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:PROT:LEV %.6f" },
985 { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ENABLED, ":SOUR:CURR:PROT:STAT?" },
986 { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE, ":SOUR:CURR:PROT:STAT ON" },
987 { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE, ":SOUR:CURR:PROT:STAT OFF" },
988 { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ACTIVE, ":SOUR:CURR:PROT:TRIP?" },
992 static const uint32_t rs_hmc8043_devopts[] = {
994 SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET,
995 SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET,
998 static const uint32_t rs_hmc8043_devopts_cg[] = {
999 SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET,
1000 SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET,
1001 SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
1002 SR_CONF_VOLTAGE | SR_CONF_GET,
1003 SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
1004 SR_CONF_CURRENT | SR_CONF_GET,
1005 SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
1006 SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
1009 static const struct channel_spec rs_hmc8043_ch[] = {
1010 { "1", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 3, 0.001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
1011 { "2", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 3, 0.001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
1012 { "3", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 3, 0.001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
1015 static const struct channel_group_spec rs_hmc8043_cg[] = {
1016 { "1", CH_IDX(0), PPS_OVP, SR_MQFLAG_DC },
1017 { "2", CH_IDX(1), PPS_OVP, SR_MQFLAG_DC },
1018 { "3", CH_IDX(2), PPS_OVP, SR_MQFLAG_DC },
1021 static const struct scpi_command rs_hmc8043_cmd[] = {
1022 { SCPI_CMD_SELECT_CHANNEL, "INST:NSEL %s" },
1023 { SCPI_CMD_GET_MEAS_VOLTAGE, "MEAS:VOLT?" },
1024 { SCPI_CMD_GET_MEAS_CURRENT, "MEAS:CURR?" },
1025 { SCPI_CMD_GET_VOLTAGE_TARGET, "VOLT?" },
1026 { SCPI_CMD_SET_VOLTAGE_TARGET, "VOLT %.6f" },
1027 { SCPI_CMD_GET_CURRENT_LIMIT, "CURR?" },
1028 { SCPI_CMD_SET_CURRENT_LIMIT, "CURR %.6f" },
1029 { SCPI_CMD_GET_OUTPUT_ENABLED, "OUTP?" },
1030 { SCPI_CMD_SET_OUTPUT_ENABLE, "OUTP ON" },
1031 { SCPI_CMD_SET_OUTPUT_DISABLE, "OUTP OFF" },
1032 { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, "VOLT:PROT:TRIP?" },
1033 { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "VOLT:PROT:LEV?" },
1034 { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "VOLT:PROT:LEV %.6f" },
1035 { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ENABLED, "VOLT:PROT:STAT?" },
1036 { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_ENABLE, "VOLT:PROT:STAT ON" },
1037 { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_DISABLE, "VOLT:PROT:STAT OFF" },
1041 SR_PRIV const struct scpi_pps pps_profiles[] = {
1042 /* Agilent N5763A */
1043 { "Agilent", "N5763A", SCPI_DIALECT_UNKNOWN, 0,
1044 ARRAY_AND_SIZE(agilent_n5700a_devopts),
1045 ARRAY_AND_SIZE(agilent_n5700a_devopts_cg),
1046 ARRAY_AND_SIZE(agilent_n5763a_ch),
1047 ARRAY_AND_SIZE(agilent_n5700a_cg),
1049 .probe_channels = NULL,
1050 .init_aquisition = NULL,
1051 .update_status = NULL,
1054 /* Agilent N5767A */
1055 { "Agilent", "N5767A", SCPI_DIALECT_UNKNOWN, 0,
1056 ARRAY_AND_SIZE(agilent_n5700a_devopts),
1057 ARRAY_AND_SIZE(agilent_n5700a_devopts_cg),
1058 ARRAY_AND_SIZE(agilent_n5767a_ch),
1059 ARRAY_AND_SIZE(agilent_n5700a_cg),
1061 .probe_channels = NULL,
1062 .init_aquisition = NULL,
1063 .update_status = NULL,
1066 /* BK Precision 9310 */
1067 { "BK", "^9130$", SCPI_DIALECT_UNKNOWN, 0,
1068 ARRAY_AND_SIZE(bk_9130_devopts),
1069 ARRAY_AND_SIZE(bk_9130_devopts_cg),
1070 ARRAY_AND_SIZE(bk_9130_ch),
1071 ARRAY_AND_SIZE(bk_9130_cg),
1073 .probe_channels = NULL,
1074 .init_aquisition = NULL,
1075 .update_status = NULL,
1079 { "Chroma", "61604", SCPI_DIALECT_UNKNOWN, 0,
1080 ARRAY_AND_SIZE(chroma_61604_devopts),
1081 ARRAY_AND_SIZE(chroma_61604_devopts_cg),
1082 ARRAY_AND_SIZE(chroma_61604_ch),
1083 ARRAY_AND_SIZE(chroma_61604_cg),
1085 .probe_channels = NULL,
1086 .init_aquisition = NULL,
1087 .update_status = NULL,
1090 /* Chroma 62000 series */
1091 { "Chroma", "620[0-9]{2}P-[0-9]{2,3}-[0-9]{1,3}", SCPI_DIALECT_UNKNOWN, 0,
1092 ARRAY_AND_SIZE(chroma_62000_devopts),
1093 ARRAY_AND_SIZE(chroma_62000_devopts_cg),
1097 .probe_channels = chroma_62000p_probe_channels,
1098 .init_aquisition = NULL,
1099 .update_status = NULL,
1103 * This entry is for testing the HP COMP language with a HP 6632B power
1104 * supply switched to the COMP language ("SYST:LANG COMP"). When used,
1105 * disable the entry for the HP 6632B below!
1108 { "HP", "6632B", SCPI_DIALECT_HP_COMP, 0,
1109 ARRAY_AND_SIZE(hp_6630a_devopts),
1110 ARRAY_AND_SIZE(hp_6630a_devopts_cg),
1111 ARRAY_AND_SIZE(hp_6632a_ch),
1112 ARRAY_AND_SIZE(hp_6630a_cg),
1114 .probe_channels = NULL,
1115 hp_6630a_init_aquisition,
1116 hp_6630a_update_status,
1121 { "HP", "6632A", SCPI_DIALECT_HP_COMP, 0,
1122 ARRAY_AND_SIZE(hp_6630a_devopts),
1123 ARRAY_AND_SIZE(hp_6630a_devopts_cg),
1124 ARRAY_AND_SIZE(hp_6632a_ch),
1125 ARRAY_AND_SIZE(hp_6630a_cg),
1127 .probe_channels = NULL,
1128 hp_6630a_init_aquisition,
1129 hp_6630a_update_status,
1133 { "HP", "6633A", SCPI_DIALECT_HP_COMP, 0,
1134 ARRAY_AND_SIZE(hp_6630a_devopts),
1135 ARRAY_AND_SIZE(hp_6630a_devopts_cg),
1136 ARRAY_AND_SIZE(hp_6633a_ch),
1137 ARRAY_AND_SIZE(hp_6630a_cg),
1139 .probe_channels = NULL,
1140 hp_6630a_init_aquisition,
1141 hp_6630a_update_status,
1145 { "HP", "6634A", SCPI_DIALECT_HP_COMP, 0,
1146 ARRAY_AND_SIZE(hp_6630a_devopts),
1147 ARRAY_AND_SIZE(hp_6630a_devopts_cg),
1148 ARRAY_AND_SIZE(hp_6634a_ch),
1149 ARRAY_AND_SIZE(hp_6630a_cg),
1151 .probe_channels = NULL,
1152 hp_6630a_init_aquisition,
1153 hp_6630a_update_status,
1157 { "HP", "6611C", SCPI_DIALECT_HP_66XXB, PPS_OTP,
1158 ARRAY_AND_SIZE(hp_6630b_devopts),
1159 ARRAY_AND_SIZE(hp_6630b_devopts_cg),
1160 ARRAY_AND_SIZE(hp_6611c_ch),
1161 ARRAY_AND_SIZE(hp_6630b_cg),
1163 .probe_channels = NULL,
1164 hp_6630b_init_aquisition,
1165 hp_6630b_update_status,
1169 { "HP", "6612C", SCPI_DIALECT_HP_66XXB, PPS_OTP,
1170 ARRAY_AND_SIZE(hp_6630b_devopts),
1171 ARRAY_AND_SIZE(hp_6630b_devopts_cg),
1172 ARRAY_AND_SIZE(hp_6612c_ch),
1173 ARRAY_AND_SIZE(hp_6630b_cg),
1175 .probe_channels = NULL,
1176 hp_6630b_init_aquisition,
1177 hp_6630b_update_status,
1181 { "HP", "6613C", SCPI_DIALECT_HP_66XXB, PPS_OTP,
1182 ARRAY_AND_SIZE(hp_6630b_devopts),
1183 ARRAY_AND_SIZE(hp_6630b_devopts_cg),
1184 ARRAY_AND_SIZE(hp_6613c_ch),
1185 ARRAY_AND_SIZE(hp_6630b_cg),
1187 .probe_channels = NULL,
1188 hp_6630b_init_aquisition,
1189 hp_6630b_update_status,
1193 { "HP", "6614C", SCPI_DIALECT_HP_66XXB, PPS_OTP,
1194 ARRAY_AND_SIZE(hp_6630b_devopts),
1195 ARRAY_AND_SIZE(hp_6630b_devopts_cg),
1196 ARRAY_AND_SIZE(hp_6614c_ch),
1197 ARRAY_AND_SIZE(hp_6630b_cg),
1199 .probe_channels = NULL,
1200 hp_6630b_init_aquisition,
1201 hp_6630b_update_status,
1205 { "HP", "6631B", SCPI_DIALECT_HP_66XXB, PPS_OTP,
1206 ARRAY_AND_SIZE(hp_6630b_devopts),
1207 ARRAY_AND_SIZE(hp_6630b_devopts_cg),
1208 ARRAY_AND_SIZE(hp_6631b_ch),
1209 ARRAY_AND_SIZE(hp_6630b_cg),
1211 .probe_channels = NULL,
1212 hp_6630b_init_aquisition,
1213 hp_6630b_update_status,
1217 { "HP", "6632B", SCPI_DIALECT_HP_66XXB, PPS_OTP,
1218 ARRAY_AND_SIZE(hp_6630b_devopts),
1219 ARRAY_AND_SIZE(hp_6630b_devopts_cg),
1220 ARRAY_AND_SIZE(hp_6632b_ch),
1221 ARRAY_AND_SIZE(hp_6630b_cg),
1223 .probe_channels = NULL,
1224 hp_6630b_init_aquisition,
1225 hp_6630b_update_status,
1229 { "HP", "66332A", SCPI_DIALECT_HP_66XXB, PPS_OTP,
1230 ARRAY_AND_SIZE(hp_6630b_devopts),
1231 ARRAY_AND_SIZE(hp_6630b_devopts_cg),
1232 ARRAY_AND_SIZE(hp_66332a_ch),
1233 ARRAY_AND_SIZE(hp_6630b_cg),
1235 .probe_channels = NULL,
1236 hp_6630b_init_aquisition,
1237 hp_6630b_update_status,
1241 { "HP", "6633B", SCPI_DIALECT_HP_66XXB, PPS_OTP,
1242 ARRAY_AND_SIZE(hp_6630b_devopts),
1243 ARRAY_AND_SIZE(hp_6630b_devopts_cg),
1244 ARRAY_AND_SIZE(hp_6633b_ch),
1245 ARRAY_AND_SIZE(hp_6630b_cg),
1247 .probe_channels = NULL,
1248 hp_6630b_init_aquisition,
1249 hp_6630b_update_status,
1253 { "HP", "6634B", SCPI_DIALECT_HP_66XXB, PPS_OTP,
1254 ARRAY_AND_SIZE(hp_6630b_devopts),
1255 ARRAY_AND_SIZE(hp_6630b_devopts_cg),
1256 ARRAY_AND_SIZE(hp_6634b_ch),
1257 ARRAY_AND_SIZE(hp_6630b_cg),
1259 .probe_channels = NULL,
1260 hp_6630b_init_aquisition,
1261 hp_6630b_update_status,
1264 /* Rigol DP700 series */
1265 { "Rigol", "^DP711$", SCPI_DIALECT_UNKNOWN, 0,
1266 ARRAY_AND_SIZE(rigol_dp700_devopts),
1267 ARRAY_AND_SIZE(rigol_dp700_devopts_cg),
1268 ARRAY_AND_SIZE(rigol_dp711_ch),
1269 ARRAY_AND_SIZE(rigol_dp700_cg),
1271 .probe_channels = NULL,
1272 .init_aquisition = NULL,
1273 .update_status = NULL,
1275 { "Rigol", "^DP712$", SCPI_DIALECT_UNKNOWN, 0,
1276 ARRAY_AND_SIZE(rigol_dp700_devopts),
1277 ARRAY_AND_SIZE(rigol_dp700_devopts_cg),
1278 ARRAY_AND_SIZE(rigol_dp712_ch),
1279 ARRAY_AND_SIZE(rigol_dp700_cg),
1281 .probe_channels = NULL,
1282 .init_aquisition = NULL,
1283 .update_status = NULL,
1286 /* Rigol DP800 series */
1287 { "Rigol", "^DP821A$", SCPI_DIALECT_UNKNOWN, PPS_OTP,
1288 ARRAY_AND_SIZE(rigol_dp800_devopts),
1289 ARRAY_AND_SIZE(rigol_dp800_devopts_cg),
1290 ARRAY_AND_SIZE(rigol_dp821a_ch),
1291 ARRAY_AND_SIZE(rigol_dp820_cg),
1293 .probe_channels = NULL,
1294 .init_aquisition = NULL,
1295 .update_status = NULL,
1297 { "Rigol", "^DP831A$", SCPI_DIALECT_UNKNOWN, PPS_OTP,
1298 ARRAY_AND_SIZE(rigol_dp800_devopts),
1299 ARRAY_AND_SIZE(rigol_dp800_devopts_cg),
1300 ARRAY_AND_SIZE(rigol_dp831_ch),
1301 ARRAY_AND_SIZE(rigol_dp830_cg),
1303 .probe_channels = NULL,
1304 .init_aquisition = NULL,
1305 .update_status = NULL,
1307 { "Rigol", "^(DP832|DP832A)$", SCPI_DIALECT_UNKNOWN, PPS_OTP,
1308 ARRAY_AND_SIZE(rigol_dp800_devopts),
1309 ARRAY_AND_SIZE(rigol_dp800_devopts_cg),
1310 ARRAY_AND_SIZE(rigol_dp832_ch),
1311 ARRAY_AND_SIZE(rigol_dp830_cg),
1313 .probe_channels = NULL,
1314 .init_aquisition = NULL,
1315 .update_status = NULL,
1318 /* Philips/Fluke PM2800 series */
1319 { "Philips", "^PM28[13][123]/[01234]{1,2}$", SCPI_DIALECT_PHILIPS, 0,
1320 ARRAY_AND_SIZE(philips_pm2800_devopts),
1321 ARRAY_AND_SIZE(philips_pm2800_devopts_cg),
1325 philips_pm2800_probe_channels,
1326 .init_aquisition = NULL,
1327 .update_status = NULL,
1330 /* Rohde & Schwarz HMC8043 */
1331 { "Rohde&Schwarz", "HMC8043", SCPI_DIALECT_UNKNOWN, 0,
1332 ARRAY_AND_SIZE(rs_hmc8043_devopts),
1333 ARRAY_AND_SIZE(rs_hmc8043_devopts_cg),
1334 ARRAY_AND_SIZE(rs_hmc8043_ch),
1335 ARRAY_AND_SIZE(rs_hmc8043_cg),
1337 .probe_channels = NULL,
1338 .init_aquisition = NULL,
1339 .update_status = NULL,
1343 SR_PRIV unsigned int num_pps_profiles = ARRAY_SIZE(pps_profiles);