src/hardware/lecroy-logicstudio/api.c

   1 /*
   2  * This file is part of the libsigrok project.
   3  *
   4  * Copyright (C) 2015 Tilman Sauerbeck <tilman@code-monkey.de>
   5  * Copyright (C) 2012 Bert Vermeulen <bert@biot.com>
   6  *
   7  * This program is free software: you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation, either version 3 of the License, or
  10  * (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  19  */
  20
  21 #include <config.h>
  22 #include <stdbool.h>
  23 #include <stdint.h>
  24 #include <string.h>
  25 #include "protocol.h"
  26
  27 #define LOGICSTUDIO16_VID 0x05ff
  28 #define LOGICSTUDIO16_PID_LACK_FIRMWARE 0xa001
  29 #define LOGICSTUDIO16_PID_HAVE_FIRMWARE 0xa002
  30
  31 #define USB_INTERFACE 0
  32 #define USB_CONFIGURATION 0
  33 #define FX2_FIRMWARE "lecroy-logicstudio16-fx2lp.fw"
  34
  35 #define UNKNOWN_ADDRESS 0xff
  36 #define MAX_RENUM_DELAY_MS 3000
  37
  38 #define NUM_CHANNELS 16
  39
  40 static const uint32_t drvopts[] = {
  41         SR_CONF_LOGIC_ANALYZER,
  42 };
  43
  44 static const uint32_t devopts[] = {
  45         SR_CONF_SAMPLERATE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
  46         SR_CONF_CAPTURE_RATIO | SR_CONF_GET | SR_CONF_SET,
  47         SR_CONF_TRIGGER_MATCH | SR_CONF_LIST,
  48 };
  49
  50 static const int32_t trigger_matches[] = {
  51         SR_TRIGGER_ZERO,
  52         SR_TRIGGER_ONE,
  53         SR_TRIGGER_RISING,
  54         SR_TRIGGER_FALLING,
  55         SR_TRIGGER_EDGE,
  56 };
  57
  58 static const uint64_t samplerates[] = {
  59         SR_HZ(1000),
  60         SR_HZ(2500),
  61         SR_KHZ(5),
  62         SR_KHZ(10),
  63         SR_KHZ(25),
  64         SR_KHZ(50),
  65         SR_KHZ(100),
  66         SR_KHZ(250),
  67         SR_KHZ(500),
  68         SR_KHZ(1000),
  69         SR_KHZ(2500),
  70         SR_MHZ(5),
  71         SR_MHZ(10),
  72         SR_MHZ(25),
  73         SR_MHZ(50),
  74         SR_MHZ(100),
  75         SR_MHZ(250),
  76         SR_MHZ(500),
  77 };
  78
  79 static struct sr_dev_inst *create_device(struct sr_usb_dev_inst *usb,
  80                 enum sr_dev_inst_status status, int64_t fw_updated)
  81 {
  82         struct sr_dev_inst *sdi;
  83         struct dev_context *devc;
  84         char channel_name[8];
  85         int i;
  86
  87         sdi = g_malloc0(sizeof(struct sr_dev_inst));
  88         sdi->status = status;
  89         sdi->vendor = g_strdup("LeCroy");
  90         sdi->model = g_strdup("LogicStudio16");
  91         sdi->inst_type = SR_INST_USB;
  92         sdi->conn = usb;
  93
  94         for (i = 0; i < NUM_CHANNELS; i++) {
  95                 snprintf(channel_name, sizeof(channel_name), "D%i", i);
  96                 sr_channel_new(sdi, i, SR_CHANNEL_LOGIC, TRUE, channel_name);
  97         }
  98
  99         devc = g_malloc0(sizeof(struct dev_context));
 100
 101         sdi->priv = devc;
 102
 103         devc->fw_updated = fw_updated;
 104         devc->capture_ratio = 50;
 105
 106         lls_set_samplerate(sdi, SR_MHZ(500));
 107
 108         return sdi;
 109 }
 110
 111 static GSList *scan(struct sr_dev_driver *di, GSList *options)
 112 {
 113         struct sr_dev_inst *sdi;
 114         struct drv_context *drvc;
 115         struct sr_usb_dev_inst *usb;
 116         struct libusb_device_descriptor des;
 117         libusb_device **devlist;
 118         GSList *devices;
 119         char connection_id[64];
 120         size_t i;
 121         int r;
 122
 123         (void)options;
 124
 125         drvc = di->context;
 126
 127         devices = NULL;
 128
 129         libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist);
 130
 131         for (i = 0; devlist[i]; i++) {
 132                 libusb_get_device_descriptor(devlist[i], &des);
 133
 134                 if (des.idVendor != LOGICSTUDIO16_VID)
 135                         continue;
 136
 137                 usb_get_port_path(devlist[i], connection_id, sizeof(connection_id));
 138
 139                 usb = NULL;
 140
 141                 switch (des.idProduct) {
 142                 case LOGICSTUDIO16_PID_HAVE_FIRMWARE:
 143                         usb = sr_usb_dev_inst_new(libusb_get_bus_number(devlist[i]),
 144                                 libusb_get_device_address(devlist[i]), NULL);
 145
 146                         sdi = create_device(usb, SR_ST_INACTIVE, 0);
 147                         break;
 148                 case LOGICSTUDIO16_PID_LACK_FIRMWARE:
 149                         r = ezusb_upload_firmware(drvc->sr_ctx, devlist[i],
 150                                 USB_CONFIGURATION, FX2_FIRMWARE);
 151                         if (r != SR_OK) {
 152                                 /*
 153                                  * An error message has already been logged by
 154                                  * ezusb_upload_firmware().
 155                                  */
 156                                 continue;
 157                         }
 158
 159                         /*
 160                          * Put unknown as the address so that we know we still
 161                          * need to get the proper address after the device
 162                          * renumerates.
 163                          */
 164                         usb = sr_usb_dev_inst_new(libusb_get_bus_number(devlist[i]),
 165                                 UNKNOWN_ADDRESS, NULL);
 166
 167                         sdi = create_device(usb, SR_ST_INITIALIZING,
 168                                 g_get_monotonic_time());
 169                         break;
 170                 default:
 171                         break;
 172                 }
 173
 174                 /* Cannot handle this device? */
 175                 if (!usb)
 176                         continue;
 177
 178                 sdi->connection_id = g_strdup(connection_id);
 179
 180                 devices = g_slist_append(devices, sdi);
 181         }
 182
 183         libusb_free_device_list(devlist, 1);
 184
 185         return std_scan_complete(di, devices);
 186 }
 187
 188 static int open_device(struct sr_dev_inst *sdi)
 189 {
 190         struct drv_context *drvc;
 191         struct sr_usb_dev_inst *usb;
 192         struct libusb_device_descriptor des;
 193         libusb_device **devlist;
 194         char connection_id[64];
 195         bool is_opened;
 196         size_t i;
 197         int r;
 198
 199         drvc = sdi->driver->context;
 200         usb = sdi->conn;
 201
 202         is_opened = FALSE;
 203
 204         libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist);
 205
 206         for (i = 0; devlist[i]; i++) {
 207                 libusb_get_device_descriptor(devlist[i], &des);
 208
 209                 if (des.idVendor != LOGICSTUDIO16_VID ||
 210                         des.idProduct != LOGICSTUDIO16_PID_HAVE_FIRMWARE)
 211                         continue;
 212
 213                 usb_get_port_path(devlist[i], connection_id, sizeof(connection_id));
 214
 215                 /*
 216                  * Check if this device is the same one that we associated
 217                  * with this sdi in scan() and bail if it isn't.
 218                  */
 219                 if (strcmp(sdi->connection_id, connection_id))
 220                         continue;
 221
 222                 r = libusb_open(devlist[i], &usb->devhdl);
 223
 224                 if (r) {
 225                         sr_err("Failed to open device: %s.",
 226                                 libusb_error_name(r));
 227                         break;
 228                 }
 229
 230                 /* Fix up address after firmware upload. */
 231                 if (usb->address == UNKNOWN_ADDRESS)
 232                         usb->address = libusb_get_device_address(devlist[i]);
 233
 234                 is_opened = TRUE;
 235
 236                 break;
 237         }
 238
 239         libusb_free_device_list(devlist, 1);
 240
 241         if (!is_opened)
 242                 return SR_ERR;
 243
 244         if ((r = libusb_claim_interface(usb->devhdl, USB_INTERFACE))) {
 245                 sr_err("Failed to claim interface: %s.",
 246                         libusb_error_name(r));
 247                 return SR_ERR;
 248         }
 249
 250         sdi->status = SR_ST_ACTIVE;
 251
 252         return SR_OK;
 253 }
 254
 255 static int dev_open(struct sr_dev_inst *sdi)
 256 {
 257         struct dev_context *devc;
 258         int64_t timediff_us, timediff_ms;
 259         int ret;
 260
 261         devc = sdi->priv;
 262
 263         /*
 264          * If we didn't need to upload FX2 firmware in scan(), open the device
 265          * right away. Otherwise, wait up to MAX_RENUM_DELAY_MS ms for the
 266          * FX2 to renumerate.
 267          */
 268         if (!devc->fw_updated) {
 269                 ret = open_device(sdi);
 270         } else {
 271                 sr_info("Waiting for device to reset.");
 272
 273                 /* Takes >= 300ms for the FX2 to be gone from the USB bus. */
 274                 g_usleep(300 * 1000);
 275                 timediff_ms = 0;
 276
 277                 while (timediff_ms < MAX_RENUM_DELAY_MS) {
 278                         ret = open_device(sdi);
 279
 280                         if (ret == SR_OK)
 281                                 break;
 282
 283                         g_usleep(100 * 1000);
 284
 285                         timediff_us = g_get_monotonic_time() - devc->fw_updated;
 286                         timediff_ms = timediff_us / 1000;
 287
 288                         sr_spew("Waited %" PRIi64 "ms.", timediff_ms);
 289                 }
 290
 291                 if (ret != SR_OK) {
 292                         sr_err("Device failed to renumerate.");
 293                         return SR_ERR;
 294                 }
 295
 296                 sr_info("Device came back after %" PRIi64 "ms.", timediff_ms);
 297         }
 298
 299         if (ret != SR_OK) {
 300                 sr_err("Unable to open device.");
 301                 return ret;
 302         }
 303
 304         /*
 305          * Only allocate the sample buffer now since it's rather large.
 306          * Don't want to allocate it before we know we are going to use it.
 307          */
 308         devc->fetched_samples = g_malloc(SAMPLE_BUF_SIZE);
 309
 310         devc->conv8to16 = g_malloc(CONV_8TO16_BUF_SIZE);
 311
 312         devc->intr_xfer = libusb_alloc_transfer(0);
 313         devc->bulk_xfer = libusb_alloc_transfer(0);
 314
 315         return SR_OK;
 316 }
 317
 318 static int dev_close(struct sr_dev_inst *sdi)
 319 {
 320         struct sr_usb_dev_inst *usb;
 321         struct dev_context *devc;
 322
 323         usb = sdi->conn;
 324         devc = sdi->priv;
 325
 326         g_free(devc->fetched_samples);
 327         devc->fetched_samples = NULL;
 328
 329         g_free(devc->conv8to16);
 330         devc->conv8to16 = NULL;
 331
 332         if (devc->intr_xfer) {
 333                 devc->intr_xfer->buffer = NULL; /* Points into devc. */
 334                 libusb_free_transfer(devc->intr_xfer);
 335                 devc->intr_xfer = NULL;
 336         }
 337
 338         if (devc->bulk_xfer) {
 339                 devc->bulk_xfer->buffer = NULL; /* Points into devc. */
 340                 libusb_free_transfer(devc->bulk_xfer);
 341                 devc->bulk_xfer = NULL;
 342         }
 343
 344         if (!usb->devhdl)
 345                 return SR_ERR_BUG;
 346
 347         libusb_release_interface(usb->devhdl, 0);
 348
 349         libusb_close(usb->devhdl);
 350         usb->devhdl = NULL;
 351
 352         return SR_OK;
 353 }
 354
 355 static int config_get(uint32_t key, GVariant **data,
 356         const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
 357 {
 358         struct dev_context *devc;
 359
 360         (void)cg;
 361
 362         if (!sdi)
 363                 return SR_ERR_ARG;
 364
 365         devc = sdi->priv;
 366
 367         switch (key) {
 368         case SR_CONF_SAMPLERATE:
 369                 *data = g_variant_new_uint64(lls_get_samplerate(sdi));
 370                 break;
 371         case SR_CONF_CAPTURE_RATIO:
 372                 *data = g_variant_new_uint64(devc->capture_ratio);
 373                 break;
 374         default:
 375                 return SR_ERR_NA;
 376         }
 377
 378         return SR_OK;
 379 }
 380
 381 static int config_set(uint32_t key, GVariant *data,
 382         const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
 383 {
 384         struct dev_context *devc;
 385
 386         (void)cg;
 387
 388         if (!sdi)
 389                 return SR_ERR_ARG;
 390
 391         devc = sdi->priv;
 392
 393         switch (key) {
 394         case SR_CONF_SAMPLERATE:
 395                 return lls_set_samplerate(sdi, g_variant_get_uint64(data));
 396         case SR_CONF_CAPTURE_RATIO:
 397                 devc->capture_ratio = g_variant_get_uint64(data);
 398                 break;
 399         default:
 400                 return SR_ERR_NA;
 401         }
 402
 403         return SR_OK;
 404 }
 405
 406 static int config_list(uint32_t key, GVariant **data,
 407         const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
 408 {
 409         switch (key) {
 410         case SR_CONF_DEVICE_OPTIONS:
 411                 return STD_CONFIG_LIST(key, data, sdi, cg, NULL, drvopts, devopts);
 412         case SR_CONF_SAMPLERATE:
 413                 *data = std_gvar_samplerates(ARRAY_AND_SIZE(samplerates));
 414                 break;
 415         case SR_CONF_TRIGGER_MATCH:
 416                 *data = std_gvar_array_i32(ARRAY_AND_SIZE(trigger_matches));
 417                 break;
 418         default:
 419                 return SR_ERR_NA;
 420         }
 421
 422         return SR_OK;
 423 }
 424
 425 static int config_commit(const struct sr_dev_inst *sdi)
 426 {
 427         return lls_setup_acquisition(sdi);
 428 }
 429
 430 static int receive_usb_data(int fd, int revents, void *cb_data)
 431 {
 432         struct drv_context *drvc;
 433         struct timeval tv;
 434
 435         (void)fd;
 436         (void)revents;
 437
 438         drvc = (struct drv_context *)cb_data;
 439
 440         tv.tv_sec = 0;
 441         tv.tv_usec = 0;
 442
 443         libusb_handle_events_timeout_completed(drvc->sr_ctx->libusb_ctx,
 444                 &tv, NULL);
 445
 446         return TRUE;
 447 }
 448
 449 static int dev_acquisition_start(const struct sr_dev_inst *sdi)
 450 {
 451         struct drv_context *drvc;
 452         int ret;
 453
 454         drvc = sdi->driver->context;
 455
 456         if ((ret = lls_start_acquisition(sdi)) < 0)
 457                 return ret;
 458
 459         std_session_send_df_header(sdi);
 460
 461         return usb_source_add(sdi->session, drvc->sr_ctx, 100,
 462                 receive_usb_data, drvc);
 463 }
 464
 465 static int dev_acquisition_stop(struct sr_dev_inst *sdi)
 466 {
 467         return lls_stop_acquisition(sdi);
 468 }
 469
 470 static struct sr_dev_driver lecroy_logicstudio_driver_info = {
 471         .name = "lecroy-logicstudio",
 472         .longname = "LeCroy LogicStudio",
 473         .api_version = 1,
 474         .init = std_init,
 475         .cleanup = std_cleanup,
 476         .scan = scan,
 477         .dev_list = std_dev_list,
 478         .dev_clear = std_dev_clear,
 479         .config_get = config_get,
 480         .config_set = config_set,
 481         .config_list = config_list,
 482         .config_commit = config_commit,
 483         .dev_open = dev_open,
 484         .dev_close = dev_close,
 485         .dev_acquisition_start = dev_acquisition_start,
 486         .dev_acquisition_stop = dev_acquisition_stop,
 487         .context = NULL,
 488 };
 489 SR_REGISTER_DEV_DRIVER(lecroy_logicstudio_driver_info);