| | 1 | /* |
| | 2 | * This file is part of the libsigrok project. |
| | 3 | * |
| | 4 | * Copyright (C) 2012 Bert Vermeulen <bert@biot.com> |
| | 5 | * Copyright (C) 2012 Alexandru Gagniuc <mr.nuke.me@gmail.com> |
| | 6 | * Copyright (C) 2012 Uwe Hermann <uwe@hermann-uwe.de> |
| | 7 | * |
| | 8 | * This program is free software: you can redistribute it and/or modify |
| | 9 | * it under the terms of the GNU General Public License as published by |
| | 10 | * the Free Software Foundation, either version 3 of the License, or |
| | 11 | * (at your option) any later version. |
| | 12 | * |
| | 13 | * This program is distributed in the hope that it will be useful, |
| | 14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| | 15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| | 16 | * GNU General Public License for more details. |
| | 17 | * |
| | 18 | * You should have received a copy of the GNU General Public License |
| | 19 | * along with this program. If not, see <http://www.gnu.org/licenses/>. |
| | 20 | */ |
| | 21 | |
| | 22 | #include <config.h> |
| | 23 | #include <sys/types.h> |
| | 24 | #include <sys/stat.h> |
| | 25 | #include <fcntl.h> |
| | 26 | #include <string.h> |
| | 27 | #include <glib.h> |
| | 28 | #include <libsigrok/libsigrok.h> |
| | 29 | #include "libsigrok-internal.h" |
| | 30 | #include "protocol.h" |
| | 31 | |
| | 32 | static const uint32_t scanopts[] = { |
| | 33 | SR_CONF_CONN, |
| | 34 | SR_CONF_SERIALCOMM, |
| | 35 | }; |
| | 36 | |
| | 37 | static const uint32_t drvopts[] = { |
| | 38 | SR_CONF_MULTIMETER, |
| | 39 | }; |
| | 40 | |
| | 41 | static const uint32_t devopts[] = { |
| | 42 | SR_CONF_CONTINUOUS, |
| | 43 | SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, |
| | 44 | SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET, |
| | 45 | }; |
| | 46 | |
| | 47 | static GSList *scan(struct sr_dev_driver *di, GSList *options) |
| | 48 | { |
| | 49 | struct dmm_info *dmm; |
| | 50 | struct sr_config *src; |
| | 51 | GSList *l, *devices; |
| | 52 | const char *conn, *serialcomm; |
| | 53 | struct sr_dev_inst *sdi; |
| | 54 | struct dev_context *devc; |
| | 55 | struct sr_serial_dev_inst *serial; |
| | 56 | int ret; |
| | 57 | size_t dropped, len, packet_len; |
| | 58 | uint8_t buf[128]; |
| | 59 | size_t ch_idx; |
| | 60 | char ch_name[12]; |
| | 61 | |
| | 62 | dmm = (struct dmm_info *)di; |
| | 63 | |
| | 64 | conn = dmm->conn; |
| | 65 | serialcomm = dmm->serialcomm; |
| | 66 | for (l = options; l; l = l->next) { |
| | 67 | src = l->data; |
| | 68 | switch (src->key) { |
| | 69 | case SR_CONF_CONN: |
| | 70 | conn = g_variant_get_string(src->data, NULL); |
| | 71 | break; |
| | 72 | case SR_CONF_SERIALCOMM: |
| | 73 | serialcomm = g_variant_get_string(src->data, NULL); |
| | 74 | break; |
| | 75 | } |
| | 76 | } |
| | 77 | if (!conn) |
| | 78 | return NULL; |
| | 79 | |
| | 80 | serial = sr_serial_dev_inst_new(conn, serialcomm); |
| | 81 | |
| | 82 | if (serial_open(serial, SERIAL_RDWR) != SR_OK) |
| | 83 | return NULL; |
| | 84 | sr_info("Probing serial port %s.", conn); |
| | 85 | |
| | 86 | if (dmm->after_open) { |
| | 87 | ret = dmm->after_open(serial); |
| | 88 | if (ret != SR_OK) { |
| | 89 | sr_err("Activity after port open failed: %d.", ret); |
| | 90 | return NULL; |
| | 91 | } |
| | 92 | } |
| | 93 | |
| | 94 | devices = NULL; |
| | 95 | |
| | 96 | /* Request a packet if the DMM requires this. */ |
| | 97 | if (dmm->packet_request) { |
| | 98 | if ((ret = dmm->packet_request(serial)) < 0) { |
| | 99 | sr_err("Failed to request packet: %d.", ret); |
| | 100 | return NULL; |
| | 101 | } |
| | 102 | } |
| | 103 | |
| | 104 | /* |
| | 105 | * There's no way to get an ID from the multimeter. It just sends data |
| | 106 | * periodically (or upon request), so the best we can do is check if |
| | 107 | * the packets match the expected format. |
| | 108 | * |
| | 109 | * If we dropped more than two packets worth of data, something is |
| | 110 | * wrong. We shouldn't quit however, since the dropped bytes might be |
| | 111 | * just zeroes at the beginning of the stream. Those can occur as a |
| | 112 | * combination of the nonstandard cable that ships with some devices |
| | 113 | * and the serial port or USB to serial adapter. |
| | 114 | */ |
| | 115 | len = sizeof(buf); |
| | 116 | ret = serial_stream_detect(serial, buf, &len, dmm->packet_size, |
| | 117 | dmm->packet_valid, dmm->packet_valid_len, &packet_len, 3000); |
| | 118 | if (ret != SR_OK) |
| | 119 | goto scan_cleanup; |
| | 120 | dropped = len - dmm->packet_size; |
| | 121 | if (dropped > 2 * packet_len) |
| | 122 | sr_warn("Packet search dropped a lot of data."); |
| | 123 | sr_info("Found device on port %s.", conn); |
| | 124 | |
| | 125 | /* |
| | 126 | * Setup optional additional callbacks when sub device drivers |
| | 127 | * happen to provide them. (This is a compromise to do it here, |
| | 128 | * and not extend the DMM_CONN() et al set of macros.) |
| | 129 | */ |
| | 130 | if (strcmp(dmm->di.name, "brymen-bm52x") == 0) { |
| | 131 | /* Applicable to BM520s but not to BM820s. */ |
| | 132 | dmm->dmm_state_init = brymen_bm52x_state_init; |
| | 133 | dmm->dmm_state_free = brymen_bm52x_state_free; |
| | 134 | dmm->config_get = brymen_bm52x_config_get; |
| | 135 | dmm->config_set = brymen_bm52x_config_set; |
| | 136 | dmm->config_list = brymen_bm52x_config_list; |
| | 137 | dmm->acquire_start = brymen_bm52x_acquire_start; |
| | 138 | } |
| | 139 | if (dmm->dmm_state_init) |
| | 140 | dmm->dmm_state = dmm->dmm_state_init(); |
| | 141 | |
| | 142 | /* Setup the device instance. */ |
| | 143 | sdi = g_malloc0(sizeof(*sdi)); |
| | 144 | sdi->status = SR_ST_INACTIVE; |
| | 145 | sdi->vendor = g_strdup(dmm->vendor); |
| | 146 | sdi->model = g_strdup(dmm->device); |
| | 147 | devc = g_malloc0(sizeof(*devc)); |
| | 148 | sr_sw_limits_init(&devc->limits); |
| | 149 | sdi->inst_type = SR_INST_SERIAL; |
| | 150 | sdi->conn = serial; |
| | 151 | sdi->priv = devc; |
| | 152 | |
| | 153 | /* Create (optionally device dependent) channel(s). */ |
| | 154 | dmm->channel_count = 1; |
| | 155 | if (dmm->packet_parse == sr_brymen_bm52x_parse) |
| | 156 | dmm->channel_count = BRYMEN_BM52X_DISPLAY_COUNT; |
| | 157 | if (dmm->packet_parse == sr_brymen_bm86x_parse) |
| | 158 | dmm->channel_count = BRYMEN_BM86X_DISPLAY_COUNT; |
| | 159 | if (dmm->packet_parse == sr_eev121gw_3displays_parse) { |
| | 160 | dmm->channel_count = EEV121GW_DISPLAY_COUNT; |
| | 161 | dmm->channel_formats = eev121gw_channel_formats; |
| | 162 | } |
| | 163 | if (dmm->packet_parse == sr_metex14_4packets_parse) |
| | 164 | dmm->channel_count = 4; |
| | 165 | if (dmm->packet_parse == sr_ms2115b_parse) { |
| | 166 | dmm->channel_count = MS2115B_DISPLAY_COUNT; |
| | 167 | dmm->channel_formats = ms2115b_channel_formats; |
| | 168 | } |
| | 169 | for (ch_idx = 0; ch_idx < dmm->channel_count; ch_idx++) { |
| | 170 | size_t ch_num; |
| | 171 | const char *fmt; |
| | 172 | fmt = "P%zu"; |
| | 173 | if (dmm->channel_formats && dmm->channel_formats[ch_idx]) |
| | 174 | fmt = dmm->channel_formats[ch_idx]; |
| | 175 | ch_num = ch_idx + 1; |
| | 176 | snprintf(ch_name, sizeof(ch_name), fmt, ch_num); |
| | 177 | sr_channel_new(sdi, ch_idx, SR_CHANNEL_ANALOG, TRUE, ch_name); |
| | 178 | } |
| | 179 | |
| | 180 | /* Add found device to result set. */ |
| | 181 | devices = g_slist_append(devices, sdi); |
| | 182 | |
| | 183 | scan_cleanup: |
| | 184 | serial_close(serial); |
| | 185 | |
| | 186 | return std_scan_complete(di, devices); |
| | 187 | } |
| | 188 | |
| | 189 | static int config_get(uint32_t key, GVariant **data, |
| | 190 | const struct sr_dev_inst *sdi, const struct sr_channel_group *cg) |
| | 191 | { |
| | 192 | struct dev_context *devc; |
| | 193 | struct dmm_info *dmm; |
| | 194 | |
| | 195 | if (!sdi) |
| | 196 | return SR_ERR_ARG; |
| | 197 | devc = sdi->priv; |
| | 198 | |
| | 199 | switch (key) { |
| | 200 | case SR_CONF_LIMIT_SAMPLES: |
| | 201 | case SR_CONF_LIMIT_FRAMES: |
| | 202 | case SR_CONF_LIMIT_MSEC: |
| | 203 | return sr_sw_limits_config_get(&devc->limits, key, data); |
| | 204 | default: |
| | 205 | dmm = (struct dmm_info *)sdi->driver; |
| | 206 | if (!dmm || !dmm->config_get) |
| | 207 | return SR_ERR_NA; |
| | 208 | return dmm->config_get(dmm->dmm_state, key, data, sdi, cg); |
| | 209 | } |
| | 210 | /* UNREACH */ |
| | 211 | } |
| | 212 | |
| | 213 | static int config_set(uint32_t key, GVariant *data, |
| | 214 | const struct sr_dev_inst *sdi, const struct sr_channel_group *cg) |
| | 215 | { |
| | 216 | struct dev_context *devc; |
| | 217 | struct dmm_info *dmm; |
| | 218 | |
| | 219 | if (!sdi) |
| | 220 | return SR_ERR_ARG; |
| | 221 | devc = sdi->priv; |
| | 222 | (void)cg; |
| | 223 | |
| | 224 | switch (key) { |
| | 225 | case SR_CONF_LIMIT_SAMPLES: |
| | 226 | case SR_CONF_LIMIT_FRAMES: |
| | 227 | case SR_CONF_LIMIT_MSEC: |
| | 228 | return sr_sw_limits_config_set(&devc->limits, key, data); |
| | 229 | default: |
| | 230 | dmm = (struct dmm_info *)sdi->driver; |
| | 231 | if (!dmm || !dmm->config_set) |
| | 232 | return SR_ERR_NA; |
| | 233 | return dmm->config_set(dmm->dmm_state, key, data, sdi, cg); |
| | 234 | } |
| | 235 | } |
| | 236 | |
| | 237 | static int config_list(uint32_t key, GVariant **data, |
| | 238 | const struct sr_dev_inst *sdi, const struct sr_channel_group *cg) |
| | 239 | { |
| | 240 | struct dmm_info *dmm; |
| | 241 | int ret; |
| | 242 | |
| | 243 | /* Use common logic for standard keys. */ |
| | 244 | if (!sdi) |
| | 245 | return STD_CONFIG_LIST(key, data, sdi, cg, scanopts, drvopts, devopts); |
| | 246 | |
| | 247 | /* |
| | 248 | * Check for device specific config_list handler. ERR N/A from |
| | 249 | * that handler is non-fatal, just falls back to common logic. |
| | 250 | */ |
| | 251 | dmm = (struct dmm_info *)sdi->driver; |
| | 252 | if (dmm && dmm->config_list) { |
| | 253 | ret = dmm->config_list(dmm->dmm_state, key, data, sdi, cg); |
| | 254 | if (ret != SR_ERR_NA) |
| | 255 | return ret; |
| | 256 | } |
| | 257 | |
| | 258 | return STD_CONFIG_LIST(key, data, sdi, cg, scanopts, drvopts, devopts); |
| | 259 | } |
| | 260 | |
| | 261 | static int dev_acquisition_start(const struct sr_dev_inst *sdi) |
| | 262 | { |
| | 263 | struct dev_context *devc; |
| | 264 | struct dmm_info *dmm; |
| | 265 | sr_receive_data_callback cb_func; |
| | 266 | void *cb_data; |
| | 267 | int ret; |
| | 268 | struct sr_serial_dev_inst *serial; |
| | 269 | |
| | 270 | devc = sdi->priv; |
| | 271 | |
| | 272 | sr_sw_limits_acquisition_start(&devc->limits); |
| | 273 | std_session_send_df_header(sdi); |
| | 274 | |
| | 275 | cb_func = receive_data; |
| | 276 | cb_data = (void *)sdi; |
| | 277 | dmm = (struct dmm_info *)sdi->driver; |
| | 278 | if (dmm && dmm->acquire_start) { |
| | 279 | ret = dmm->acquire_start(dmm->dmm_state, sdi, |
| | 280 | &cb_func, &cb_data); |
| | 281 | if (ret < 0) |
| | 282 | return ret; |
| | 283 | } |
| | 284 | |
| | 285 | serial = sdi->conn; |
| | 286 | serial_source_add(sdi->session, serial, G_IO_IN, 50, |
| | 287 | cb_func, cb_data); |
| | 288 | |
| | 289 | return SR_OK; |
| | 290 | } |
| | 291 | |
| | 292 | #define DMM_ENTRY(ID, CHIPSET, VENDOR, MODEL, \ |
| | 293 | CONN, SERIALCOMM, PACKETSIZE, TIMEOUT, DELAY, \ |
| | 294 | OPEN, REQUEST, VALID, PARSE, DETAILS, \ |
| | 295 | INIT_STATE, FREE_STATE, VALID_LEN, PARSE_LEN, \ |
| | 296 | CFG_GET, CFG_SET, CFG_LIST, ACQ_START) \ |
| | 297 | &((struct dmm_info) { \ |
| | 298 | { \ |
| | 299 | .name = ID, \ |
| | 300 | .longname = VENDOR " " MODEL, \ |
| | 301 | .api_version = 1, \ |
| | 302 | .init = std_init, \ |
| | 303 | .cleanup = std_cleanup, \ |
| | 304 | .scan = scan, \ |
| | 305 | .dev_list = std_dev_list, \ |
| | 306 | .dev_clear = std_dev_clear, \ |
| | 307 | .config_get = config_get, \ |
| | 308 | .config_set = config_set, \ |
| | 309 | .config_list = config_list, \ |
| | 310 | .dev_open = std_serial_dev_open, \ |
| | 311 | .dev_close = std_serial_dev_close, \ |
| | 312 | .dev_acquisition_start = dev_acquisition_start, \ |
| | 313 | .dev_acquisition_stop = std_serial_dev_acquisition_stop, \ |
| | 314 | .context = NULL, \ |
| | 315 | }, \ |
| | 316 | VENDOR, MODEL, CONN, SERIALCOMM, PACKETSIZE, TIMEOUT, DELAY, \ |
| | 317 | REQUEST, 1, NULL, VALID, PARSE, DETAILS, \ |
| | 318 | sizeof(struct CHIPSET##_info), \ |
| | 319 | NULL, INIT_STATE, FREE_STATE, \ |
| | 320 | OPEN, VALID_LEN, PARSE_LEN, \ |
| | 321 | CFG_GET, CFG_SET, CFG_LIST, ACQ_START, \ |
| | 322 | }).di |
| | 323 | |
| | 324 | #define DMM_CONN(ID, CHIPSET, VENDOR, MODEL, \ |
| | 325 | CONN, SERIALCOMM, PACKETSIZE, TIMEOUT, DELAY, \ |
| | 326 | REQUEST, VALID, PARSE, DETAILS) \ |
| | 327 | DMM_ENTRY(ID, CHIPSET, VENDOR, MODEL, \ |
| | 328 | CONN, SERIALCOMM, PACKETSIZE, TIMEOUT, DELAY, \ |
| | 329 | NULL, REQUEST, VALID, PARSE, DETAILS, \ |
| | 330 | NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL) |
| | 331 | |
| | 332 | #define DMM(ID, CHIPSET, VENDOR, MODEL, SERIALCOMM, PACKETSIZE, TIMEOUT, \ |
| | 333 | DELAY, REQUEST, VALID, PARSE, DETAILS) \ |
| | 334 | DMM_CONN(ID, CHIPSET, VENDOR, MODEL, \ |
| | 335 | NULL, SERIALCOMM, PACKETSIZE, TIMEOUT, DELAY, \ |
| | 336 | REQUEST, VALID, PARSE, DETAILS) |
| | 337 | |
| | 338 | #define DMM_LEN(ID, CHIPSET, VENDOR, MODEL, \ |
| | 339 | CONN, SERIALCOMM, PACKETSIZE, TIMEOUT, DELAY, \ |
| | 340 | INIT, FREE, OPEN, REQUEST, VALID, PARSE, DETAILS) \ |
| | 341 | DMM_ENTRY(ID, CHIPSET, VENDOR, MODEL, \ |
| | 342 | CONN, SERIALCOMM, PACKETSIZE, TIMEOUT, DELAY, \ |
| | 343 | OPEN, REQUEST, NULL, NULL, DETAILS, \ |
| | 344 | INIT, FREE, VALID, PARSE, NULL, NULL, NULL, NULL) |
| | 345 | |
| | 346 | SR_REGISTER_DEV_DRIVER_LIST(serial_dmm_drivers, |
| | 347 | /* |
| | 348 | * The items are sorted by chipset first and then model name. |
| | 349 | * |
| | 350 | * This reflects the developer's perspective and is preferrable |
| | 351 | * during maintenance, as a vendor/product based sort order does |
| | 352 | * not work well for rebranded models, and from a support point |
| | 353 | * of view it's more important to identify similarities between |
| | 354 | * models and compatible devices. |
| | 355 | * |
| | 356 | * Fold marks {{{ }}} with matching braces were added, to further |
| | 357 | * speed up navigation in the long list. |
| | 358 | */ |
| | 359 | /* asycii based meters {{{ */ |
| | 360 | DMM( |
| | 361 | "metrix-mx56c", asycii, "Metrix", "MX56C", |
| | 362 | "2400/8n1", ASYCII_PACKET_SIZE, 0, 0, NULL, |
| | 363 | sr_asycii_packet_valid, sr_asycii_parse, NULL |
| | 364 | ), |
| | 365 | /* }}} */ |
| | 366 | /* bm25x based meters {{{ */ |
| | 367 | DMM( |
| | 368 | "brymen-bm25x", bm25x, |
| | 369 | "Brymen", "BM25x", "9600/8n1/rts=1/dtr=1", |
| | 370 | BRYMEN_BM25X_PACKET_SIZE, 0, 0, NULL, |
| | 371 | sr_brymen_bm25x_packet_valid, sr_brymen_bm25x_parse, |
| | 372 | NULL |
| | 373 | ), |
| | 374 | /* }}} */ |
| | 375 | /* bm52x based meters {{{ */ |
| | 376 | DMM_CONN( |
| | 377 | "brymen-bm52x", brymen_bm52x, "Brymen", "BM52x", |
| | 378 | "hid/bu86x", NULL, BRYMEN_BM52X_PACKET_SIZE, 4000, 500, |
| | 379 | sr_brymen_bm52x_packet_request, |
| | 380 | sr_brymen_bm52x_packet_valid, sr_brymen_bm52x_parse, |
| | 381 | NULL |
| | 382 | ), |
| | 383 | DMM_CONN( |
| | 384 | "brymen-bm82x", brymen_bm52x, "Brymen", "BM82x", |
| | 385 | "hid/bu86x", NULL, BRYMEN_BM52X_PACKET_SIZE, 4000, 500, |
| | 386 | sr_brymen_bm82x_packet_request, |
| | 387 | sr_brymen_bm82x_packet_valid, sr_brymen_bm52x_parse, |
| | 388 | NULL |
| | 389 | ), |
| | 390 | /* }}} */ |
| | 391 | /* bm85x based meters {{{ */ |
| | 392 | DMM_LEN( |
| | 393 | "brymen-bm85x", brymen_bm85x, "Brymen", "BM85x", |
| | 394 | NULL, "9600/8n1/dtr=1/rts=1", |
| | 395 | BRYMEN_BM85x_PACKET_SIZE_MIN, 2000, 400, |
| | 396 | NULL, NULL, /* INIT/FREE for DMM state */ |
| | 397 | brymen_bm85x_after_open, brymen_bm85x_packet_request, |
| | 398 | brymen_bm85x_packet_valid, brymen_bm85x_parse, |
| | 399 | NULL |
| | 400 | ), |
| | 401 | /* }}} */ |
| | 402 | /* bm86x based meters {{{ */ |
| | 403 | DMM_CONN( |
| | 404 | "brymen-bm86x", brymen_bm86x, "Brymen", "BM86x", |
| | 405 | "hid/bu86x", NULL, BRYMEN_BM86X_PACKET_SIZE, 500, 100, |
| | 406 | sr_brymen_bm86x_packet_request, |
| | 407 | sr_brymen_bm86x_packet_valid, sr_brymen_bm86x_parse, |
| | 408 | NULL |
| | 409 | ), |
| | 410 | /* }}} */ |
| | 411 | /* dtm0660 based meters {{{ */ |
| | 412 | DMM( |
| | 413 | "peaktech-3415", dtm0660, |
| | 414 | "PeakTech", "3415", "2400/8n1/rts=0/dtr=1", |
| | 415 | DTM0660_PACKET_SIZE, 0, 0, NULL, |
| | 416 | sr_dtm0660_packet_valid, sr_dtm0660_parse, NULL |
| | 417 | ), |
| | 418 | DMM( |
| | 419 | "velleman-dvm4100", dtm0660, |
| | 420 | "Velleman", "DVM4100", "2400/8n1/rts=0/dtr=1", |
| | 421 | DTM0660_PACKET_SIZE, 0, 0, NULL, |
| | 422 | sr_dtm0660_packet_valid, sr_dtm0660_parse, NULL |
| | 423 | ), |
| | 424 | /* }}} */ |
| | 425 | /* eev121gw based meters {{{ */ |
| | 426 | DMM( |
| | 427 | "eevblog-121gw", eev121gw, "EEVblog", "121GW", |
| | 428 | "115200/8n1", EEV121GW_PACKET_SIZE, 0, 0, NULL, |
| | 429 | sr_eev121gw_packet_valid, sr_eev121gw_3displays_parse, NULL |
| | 430 | ), |
| | 431 | /* }}} */ |
| | 432 | /* es519xx based meters {{{ */ |
| | 433 | DMM( |
| | 434 | "iso-tech-idm103n", es519xx, |
| | 435 | "ISO-TECH", "IDM103N", "2400/7o1/rts=0/dtr=1", |
| | 436 | ES519XX_11B_PACKET_SIZE, 0, 0, NULL, |
| | 437 | sr_es519xx_2400_11b_packet_valid, sr_es519xx_2400_11b_parse, |
| | 438 | NULL |
| | 439 | ), |
| | 440 | /* |
| | 441 | * Note: ES51922 and ES51986 baudrate is actually 19230. This is |
| | 442 | * "out" by .15%, and so is well within the typical 1% margin |
| | 443 | * that is considered acceptable in UART communication, and thus |
| | 444 | * should not cause an issue. |
| | 445 | * |
| | 446 | * However, using 19230 as baudrate here will not work, as most DMM |
| | 447 | * cables do not support that baudrate! |
| | 448 | */ |
| | 449 | DMM( |
| | 450 | "tenma-72-7750-ser", es519xx, |
| | 451 | "Tenma", "72-7750 (UT-D02 cable)", "19200/7o1/rts=0/dtr=1", |
| | 452 | ES519XX_11B_PACKET_SIZE, 0, 0, NULL, |
| | 453 | sr_es519xx_19200_11b_packet_valid, sr_es519xx_19200_11b_parse, |
| | 454 | NULL |
| | 455 | ), |
| | 456 | DMM( |
| | 457 | "uni-t-ut60g-ser", es519xx, |
| | 458 | "UNI-T", "UT60G (UT-D02 cable)", "19200/7o1/rts=0/dtr=1", |
| | 459 | ES519XX_11B_PACKET_SIZE, 0, 0, NULL, |
| | 460 | sr_es519xx_19200_11b_packet_valid, sr_es519xx_19200_11b_parse, |
| | 461 | NULL |
| | 462 | ), |
| | 463 | DMM( |
| | 464 | "uni-t-ut61e-ser", es519xx, |
| | 465 | "UNI-T", "UT61E (UT-D02 cable)", "19200/7o1/rts=0/dtr=1", |
| | 466 | ES519XX_14B_PACKET_SIZE, 0, 0, NULL, |
| | 467 | sr_es519xx_19200_14b_packet_valid, sr_es519xx_19200_14b_parse, |
| | 468 | NULL |
| | 469 | ), |
| | 470 | /* }}} */ |
| | 471 | /* fs9721 based meters {{{ */ |
| | 472 | DMM( |
| | 473 | "digitek-dt4000zc", fs9721, |
| | 474 | "Digitek", "DT4000ZC", "2400/8n1/dtr=1", |
| | 475 | FS9721_PACKET_SIZE, 0, 0, NULL, |
| | 476 | sr_fs9721_packet_valid, sr_fs9721_parse, |
| | 477 | sr_fs9721_10_temp_c |
| | 478 | ), |
| | 479 | DMM( |
| | 480 | "mastech-ms8250b", fs9721, |
| | 481 | "MASTECH", "MS8250B", "2400/8n1/rts=0/dtr=1", |
| | 482 | FS9721_PACKET_SIZE, 0, 0, NULL, |
| | 483 | sr_fs9721_packet_valid, sr_fs9721_parse, |
| | 484 | NULL |
| | 485 | ), |
| | 486 | DMM( |
| | 487 | "pce-pce-dm32", fs9721, |
| | 488 | "PCE", "PCE-DM32", "2400/8n1", |
| | 489 | FS9721_PACKET_SIZE, 0, 0, NULL, |
| | 490 | sr_fs9721_packet_valid, sr_fs9721_parse, |
| | 491 | sr_fs9721_01_10_temp_f_c |
| | 492 | ), |
| | 493 | DMM( |
| | 494 | "peaktech-3330", fs9721, |
| | 495 | "PeakTech", "3330", "2400/8n1/dtr=1", |
| | 496 | FS9721_PACKET_SIZE, 0, 0, NULL, |
| | 497 | sr_fs9721_packet_valid, sr_fs9721_parse, |
| | 498 | sr_fs9721_01_10_temp_f_c |
| | 499 | ), |
| | 500 | DMM( |
| | 501 | "tecpel-dmm-8061-ser", fs9721, |
| | 502 | "Tecpel", "DMM-8061 (UT-D02 cable)", "2400/8n1/rts=0/dtr=1", |
| | 503 | FS9721_PACKET_SIZE, 0, 0, NULL, |
| | 504 | sr_fs9721_packet_valid, sr_fs9721_parse, |
| | 505 | sr_fs9721_00_temp_c |
| | 506 | ), |
| | 507 | DMM( |
| | 508 | "tekpower-tp4000ZC", fs9721, |
| | 509 | "TekPower", "TP4000ZC", "2400/8n1/dtr=1", |
| | 510 | FS9721_PACKET_SIZE, 0, 0, NULL, |
| | 511 | sr_fs9721_packet_valid, sr_fs9721_parse, |
| | 512 | sr_fs9721_10_temp_c |
| | 513 | ), |
| | 514 | DMM( |
| | 515 | "tenma-72-7745-ser", fs9721, |
| | 516 | "Tenma", "72-7745 (UT-D02 cable)", "2400/8n1/rts=0/dtr=1", |
| | 517 | FS9721_PACKET_SIZE, 0, 0, NULL, |
| | 518 | sr_fs9721_packet_valid, sr_fs9721_parse, |
| | 519 | sr_fs9721_00_temp_c |
| | 520 | ), |
| | 521 | DMM( |
| | 522 | "uni-t-ut60a-ser", fs9721, |
| | 523 | "UNI-T", "UT60A (UT-D02 cable)", "2400/8n1/rts=0/dtr=1", |
| | 524 | FS9721_PACKET_SIZE, 0, 0, NULL, |
| | 525 | sr_fs9721_packet_valid, sr_fs9721_parse, |
| | 526 | NULL |
| | 527 | ), |
| | 528 | DMM( |
| | 529 | "uni-t-ut60e-ser", fs9721, |
| | 530 | "UNI-T", "UT60E (UT-D02 cable)", "2400/8n1/rts=0/dtr=1", |
| | 531 | FS9721_PACKET_SIZE, 0, 0, NULL, |
| | 532 | sr_fs9721_packet_valid, sr_fs9721_parse, |
| | 533 | sr_fs9721_00_temp_c |
| | 534 | ), |
| | 535 | DMM( |
| | 536 | "va-va18b", fs9721, |
| | 537 | "V&A", "VA18B", "2400/8n1", |
| | 538 | FS9721_PACKET_SIZE, 0, 0, NULL, |
| | 539 | sr_fs9721_packet_valid, sr_fs9721_parse, |
| | 540 | sr_fs9721_01_temp_c |
| | 541 | ), |
| | 542 | DMM( |
| | 543 | "va-va40b", fs9721, |
| | 544 | "V&A", "VA40B", "2400/8n1", |
| | 545 | FS9721_PACKET_SIZE, 0, 0, NULL, |
| | 546 | sr_fs9721_packet_valid, sr_fs9721_parse, |
| | 547 | sr_fs9721_max_c_min |
| | 548 | ), |
| | 549 | DMM( |
| | 550 | "voltcraft-vc820-ser", fs9721, |
| | 551 | "Voltcraft", "VC-820 (UT-D02 cable)", "2400/8n1/rts=0/dtr=1", |
| | 552 | FS9721_PACKET_SIZE, 0, 0, NULL, |
| | 553 | sr_fs9721_packet_valid, sr_fs9721_parse, |
| | 554 | NULL |
| | 555 | ), |
| | 556 | DMM( |
| | 557 | "voltcraft-vc840-ser", fs9721, |
| | 558 | "Voltcraft", "VC-840 (UT-D02 cable)", "2400/8n1/rts=0/dtr=1", |
| | 559 | FS9721_PACKET_SIZE, 0, 0, NULL, |
| | 560 | sr_fs9721_packet_valid, sr_fs9721_parse, |
| | 561 | sr_fs9721_00_temp_c |
| | 562 | ), |
| | 563 | /* }}} */ |
| | 564 | /* fs9922 based meters {{{ */ |
| | 565 | DMM( |
| | 566 | "gwinstek-gdm-397", fs9922, |
| | 567 | "GW Instek", "GDM-397", "2400/8n1/rts=0/dtr=1", |
| | 568 | FS9922_PACKET_SIZE, 0, 0, NULL, |
| | 569 | sr_fs9922_packet_valid, sr_fs9922_parse, NULL |
| | 570 | ), |
| | 571 | DMM( |
| | 572 | "peaktech-2025", fs9922, |
| | 573 | "PeakTech", "2025", "2400/8n1/rts=0/dtr=1", |
| | 574 | FS9922_PACKET_SIZE, 0, 0, NULL, |
| | 575 | sr_fs9922_packet_valid, sr_fs9922_parse, NULL |
| | 576 | ), |
| | 577 | DMM( |
| | 578 | "sparkfun-70c", fs9922, |
| | 579 | "SparkFun", "70C", "2400/8n1/rts=0/dtr=1", |
| | 580 | FS9922_PACKET_SIZE, 0, 0, NULL, |
| | 581 | sr_fs9922_packet_valid, sr_fs9922_parse, NULL |
| | 582 | ), |
| | 583 | DMM( |
| | 584 | "uni-t-ut61b-ser", fs9922, |
| | 585 | "UNI-T", "UT61B (UT-D02 cable)", "2400/8n1/rts=0/dtr=1", |
| | 586 | FS9922_PACKET_SIZE, 0, 0, NULL, |
| | 587 | sr_fs9922_packet_valid, sr_fs9922_parse, NULL |
| | 588 | ), |
| | 589 | DMM( |
| | 590 | "uni-t-ut61c-ser", fs9922, |
| | 591 | "UNI-T", "UT61C (UT-D02 cable)", "2400/8n1/rts=0/dtr=1", |
| | 592 | FS9922_PACKET_SIZE, 0, 0, NULL, |
| | 593 | sr_fs9922_packet_valid, sr_fs9922_parse, NULL |
| | 594 | ), |
| | 595 | DMM( |
| | 596 | "uni-t-ut61d-ser", fs9922, |
| | 597 | "UNI-T", "UT61D (UT-D02 cable)", "2400/8n1/rts=0/dtr=1", |
| | 598 | FS9922_PACKET_SIZE, 0, 0, NULL, |
| | 599 | sr_fs9922_packet_valid, sr_fs9922_parse, NULL |
| | 600 | ), |
| | 601 | DMM_CONN( |
| | 602 | "victor-dmm", fs9922, "Victor", "Victor DMMs", |
| | 603 | "hid/victor", "2400/8n1", FS9922_PACKET_SIZE, 0, 0, NULL, |
| | 604 | sr_fs9922_packet_valid, sr_fs9922_parse, NULL |
| | 605 | ), |
| | 606 | DMM( |
| | 607 | /* |
| | 608 | * Note: The VC830 doesn't set the 'volt' and 'diode' bits of |
| | 609 | * the FS9922 protocol. Instead, it only sets the user-defined |
| | 610 | * bit "z1" to indicate "diode mode" and "voltage". |
| | 611 | */ |
| | 612 | "voltcraft-vc830-ser", fs9922, |
| | 613 | "Voltcraft", "VC-830 (UT-D02 cable)", "2400/8n1/rts=0/dtr=1", |
| | 614 | FS9922_PACKET_SIZE, 0, 0, NULL, |
| | 615 | sr_fs9922_packet_valid, sr_fs9922_parse, |
| | 616 | &sr_fs9922_z1_diode |
| | 617 | ), |
| | 618 | /* }}} */ |
| | 619 | /* m2110 based meters {{{ */ |
| | 620 | DMM( |
| | 621 | "bbcgm-2010", m2110, |
| | 622 | "BBC Goertz Metrawatt", "M2110", "1200/7n2", |
| | 623 | BBCGM_M2110_PACKET_SIZE, 0, 0, NULL, |
| | 624 | sr_m2110_packet_valid, sr_m2110_parse, |
| | 625 | NULL |
| | 626 | ), |
| | 627 | /* }}} */ |
| | 628 | /* meterman_38xr based meters {{{ */ |
| | 629 | DMM( |
| | 630 | "meterman-38xr", meterman_38xr, |
| | 631 | "Meterman", "38XR", "9600/8n1/rts=0/dtr=1", |
| | 632 | METERMAN_38XR_PACKET_SIZE, 0, 0, NULL, |
| | 633 | meterman_38xr_packet_valid, meterman_38xr_parse, |
| | 634 | NULL |
| | 635 | ), |
| | 636 | /* }}} */ |
| | 637 | /* metex14 based meters {{{ */ |
| | 638 | DMM( |
| | 639 | "mastech-mas345", metex14, |
| | 640 | "MASTECH", "MAS345", "600/7n2/rts=0/dtr=1", |
| | 641 | METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request, |
| | 642 | sr_metex14_packet_valid, sr_metex14_parse, |
| | 643 | NULL |
| | 644 | ), |
| | 645 | DMM( |
| | 646 | "metex-m3640d", metex14, |
| | 647 | "Metex", "M-3640D", "1200/7n2/rts=0/dtr=1", |
| | 648 | METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request, |
| | 649 | sr_metex14_packet_valid, sr_metex14_parse, |
| | 650 | NULL |
| | 651 | ), |
| | 652 | DMM( |
| | 653 | "metex-m3860m", metex14, |
| | 654 | "Metex", "M-3860M", "9600/7n2/rts=0/dtr=1", |
| | 655 | 4 * METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request, |
| | 656 | sr_metex14_4packets_valid, sr_metex14_4packets_parse, |
| | 657 | NULL |
| | 658 | ), |
| | 659 | DMM( |
| | 660 | "metex-m4650cr", metex14, |
| | 661 | "Metex", "M-4650CR", "1200/7n2/rts=0/dtr=1", |
| | 662 | METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request, |
| | 663 | sr_metex14_packet_valid, sr_metex14_parse, |
| | 664 | NULL |
| | 665 | ), |
| | 666 | DMM( |
| | 667 | "metex-me21", metex14, |
| | 668 | "Metex", "ME-21", "2400/7n2/rts=0/dtr=1", |
| | 669 | METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request, |
| | 670 | sr_metex14_packet_valid, sr_metex14_parse, |
| | 671 | NULL |
| | 672 | ), |
| | 673 | DMM( |
| | 674 | "metex-me31", metex14, |
| | 675 | "Metex", "ME-31", "600/7n2/rts=0/dtr=1", |
| | 676 | METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request, |
| | 677 | sr_metex14_packet_valid, sr_metex14_parse, |
| | 678 | NULL |
| | 679 | ), |
| | 680 | DMM( |
| | 681 | "peaktech-3410", metex14, |
| | 682 | "PeakTech", "3410", "600/7n2/rts=0/dtr=1", |
| | 683 | METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request, |
| | 684 | sr_metex14_packet_valid, sr_metex14_parse, |
| | 685 | NULL |
| | 686 | ), |
| | 687 | DMM( |
| | 688 | "peaktech-4370", metex14, |
| | 689 | "PeakTech", "4370", "1200/7n2/rts=0/dtr=1", |
| | 690 | METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request, |
| | 691 | sr_metex14_packet_valid, sr_metex14_parse, |
| | 692 | NULL |
| | 693 | ), |
| | 694 | DMM( |
| | 695 | "peaktech-4390a", metex14, |
| | 696 | "PeakTech", "4390A", "9600/7n2/rts=0/dtr=1", |
| | 697 | 4 * METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request, |
| | 698 | sr_metex14_4packets_valid, sr_metex14_4packets_parse, |
| | 699 | NULL |
| | 700 | ), |
| | 701 | DMM( |
| | 702 | "radioshack-22-168", metex14, |
| | 703 | "RadioShack", "22-168", "1200/7n2/rts=0/dtr=1", |
| | 704 | METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request, |
| | 705 | sr_metex14_packet_valid, sr_metex14_parse, |
| | 706 | NULL |
| | 707 | ), |
| | 708 | DMM( |
| | 709 | "radioshack-22-805", metex14, |
| | 710 | "RadioShack", "22-805", "600/7n2/rts=0/dtr=1", |
| | 711 | METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request, |
| | 712 | sr_metex14_packet_valid, sr_metex14_parse, |
| | 713 | NULL |
| | 714 | ), |
| | 715 | DMM( |
| | 716 | "voltcraft-m3650cr", metex14, |
| | 717 | "Voltcraft", "M-3650CR", "1200/7n2/rts=0/dtr=1", |
| | 718 | METEX14_PACKET_SIZE, 150, 20, sr_metex14_packet_request, |
| | 719 | sr_metex14_packet_valid, sr_metex14_parse, |
| | 720 | NULL |
| | 721 | ), |
| | 722 | DMM( |
| | 723 | "voltcraft-m3650d", metex14, |
| | 724 | "Voltcraft", "M-3650D", "1200/7n2/rts=0/dtr=1", |
| | 725 | METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request, |
| | 726 | sr_metex14_packet_valid, sr_metex14_parse, |
| | 727 | NULL |
| | 728 | ), |
| | 729 | DMM( |
| | 730 | "voltcraft-m4650cr", metex14, |
| | 731 | "Voltcraft", "M-4650CR", "1200/7n2/rts=0/dtr=1", |
| | 732 | METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request, |
| | 733 | sr_metex14_packet_valid, sr_metex14_parse, |
| | 734 | NULL |
| | 735 | ), |
| | 736 | DMM( |
| | 737 | "voltcraft-me42", metex14, |
| | 738 | "Voltcraft", "ME-42", "600/7n2/rts=0/dtr=1", |
| | 739 | METEX14_PACKET_SIZE, 250, 60, sr_metex14_packet_request, |
| | 740 | sr_metex14_packet_valid, sr_metex14_parse, |
| | 741 | NULL |
| | 742 | ), |
| | 743 | /* }}} */ |
| | 744 | /* ms2115b based meters {{{ */ |
| | 745 | DMM( |
| | 746 | "mastech-ms2115b", ms2115b, |
| | 747 | "MASTECH", "MS2115B", "1200/8n1", |
| | 748 | MS2115B_PACKET_SIZE, 0, 0, NULL, |
| | 749 | sr_ms2115b_packet_valid, sr_ms2115b_parse, |
| | 750 | NULL |
| | 751 | ), |
| | 752 | /* }}} */ |
| | 753 | /* ms8250d based meters {{{ */ |
| | 754 | DMM( |
| | 755 | "mastech-ms8250d", ms8250d, |
| | 756 | "MASTECH", "MS8250D", "2400/8n1/rts=0/dtr=1", |
| | 757 | MS8250D_PACKET_SIZE, 0, 0, NULL, |
| | 758 | sr_ms8250d_packet_valid, sr_ms8250d_parse, |
| | 759 | NULL |
| | 760 | ), |
| | 761 | /* }}} */ |
| | 762 | /* rs9lcd based meters {{{ */ |
| | 763 | DMM( |
| | 764 | "radioshack-22-812", rs9lcd, |
| | 765 | "RadioShack", "22-812", "4800/8n1/rts=0/dtr=1", |
| | 766 | RS9LCD_PACKET_SIZE, 0, 0, NULL, |
| | 767 | sr_rs9lcd_packet_valid, sr_rs9lcd_parse, |
| | 768 | NULL |
| | 769 | ), |
| | 770 | /* }}} */ |
| | 771 | /* ut71x based meters {{{ */ |
| | 772 | DMM( |
| | 773 | "tenma-72-7730-ser", ut71x, |
| | 774 | "Tenma", "72-7730 (UT-D02 cable)", "2400/7o1/rts=0/dtr=1", |
| | 775 | UT71X_PACKET_SIZE, 0, 0, NULL, |
| | 776 | sr_ut71x_packet_valid, sr_ut71x_parse, NULL |
| | 777 | ), |
| | 778 | DMM( |
| | 779 | "tenma-72-7732-ser", ut71x, |
| | 780 | "Tenma", "72-7732 (UT-D02 cable)", "2400/7o1/rts=0/dtr=1", |
| | 781 | UT71X_PACKET_SIZE, 0, 0, NULL, |
| | 782 | sr_ut71x_packet_valid, sr_ut71x_parse, NULL |
| | 783 | ), |
| | 784 | DMM( |
| | 785 | "tenma-72-9380a-ser", ut71x, |
| | 786 | "Tenma", "72-9380A (UT-D02 cable)", "2400/7o1/rts=0/dtr=1", |
| | 787 | UT71X_PACKET_SIZE, 0, 0, NULL, |
| | 788 | sr_ut71x_packet_valid, sr_ut71x_parse, NULL |
| | 789 | ), |
| | 790 | DMM( |
| | 791 | "uni-t-ut71a-ser", ut71x, |
| | 792 | "UNI-T", "UT71A (UT-D02 cable)", "2400/7o1/rts=0/dtr=1", |
| | 793 | UT71X_PACKET_SIZE, 0, 0, NULL, |
| | 794 | sr_ut71x_packet_valid, sr_ut71x_parse, NULL |
| | 795 | ), |
| | 796 | DMM( |
| | 797 | "uni-t-ut71b-ser", ut71x, |
| | 798 | "UNI-T", "UT71B (UT-D02 cable)", "2400/7o1/rts=0/dtr=1", |
| | 799 | UT71X_PACKET_SIZE, 0, 0, NULL, |
| | 800 | sr_ut71x_packet_valid, sr_ut71x_parse, NULL |
| | 801 | ), |
| | 802 | DMM( |
| | 803 | "uni-t-ut71c-ser", ut71x, |
| | 804 | "UNI-T", "UT71C (UT-D02 cable)", "2400/7o1/rts=0/dtr=1", |
| | 805 | UT71X_PACKET_SIZE, 0, 0, NULL, |
| | 806 | sr_ut71x_packet_valid, sr_ut71x_parse, NULL |
| | 807 | ), |
| | 808 | DMM( |
| | 809 | "uni-t-ut71d-ser", ut71x, |
| | 810 | "UNI-T", "UT71D (UT-D02 cable)", "2400/7o1/rts=0/dtr=1", |
| | 811 | UT71X_PACKET_SIZE, 0, 0, NULL, |
| | 812 | sr_ut71x_packet_valid, sr_ut71x_parse, NULL |
| | 813 | ), |
| | 814 | DMM( |
| | 815 | "uni-t-ut71e-ser", ut71x, |
| | 816 | "UNI-T", "UT71E (UT-D02 cable)", "2400/7o1/rts=0/dtr=1", |
| | 817 | UT71X_PACKET_SIZE, 0, 0, NULL, |
| | 818 | sr_ut71x_packet_valid, sr_ut71x_parse, NULL |
| | 819 | ), |
| | 820 | DMM( |
| | 821 | "uni-t-ut804-ser", ut71x, |
| | 822 | "UNI-T", "UT804", "2400/7o1/rts=0/dtr=1", |
| | 823 | UT71X_PACKET_SIZE, 0, 0, NULL, |
| | 824 | sr_ut71x_packet_valid, sr_ut71x_parse, NULL |
| | 825 | ), |
| | 826 | DMM( |
| | 827 | "voltcraft-vc920-ser", ut71x, |
| | 828 | "Voltcraft", "VC-920 (UT-D02 cable)", "2400/7o1/rts=0/dtr=1", |
| | 829 | UT71X_PACKET_SIZE, 0, 0, NULL, |
| | 830 | sr_ut71x_packet_valid, sr_ut71x_parse, NULL |
| | 831 | ), |
| | 832 | DMM( |
| | 833 | "voltcraft-vc940-ser", ut71x, |
| | 834 | "Voltcraft", "VC-940 (UT-D02 cable)", "2400/7o1/rts=0/dtr=1", |
| | 835 | UT71X_PACKET_SIZE, 0, 0, NULL, |
| | 836 | sr_ut71x_packet_valid, sr_ut71x_parse, NULL |
| | 837 | ), |
| | 838 | DMM( |
| | 839 | "voltcraft-vc960-ser", ut71x, |
| | 840 | "Voltcraft", "VC-960 (UT-D02 cable)", "2400/7o1/rts=0/dtr=1", |
| | 841 | UT71X_PACKET_SIZE, 0, 0, NULL, |
| | 842 | sr_ut71x_packet_valid, sr_ut71x_parse, NULL |
| | 843 | ), |
| | 844 | /* }}} */ |
| | 845 | /* vc870 based meters {{{ */ |
| | 846 | DMM( |
| | 847 | "voltcraft-vc870-ser", vc870, |
| | 848 | "Voltcraft", "VC-870 (UT-D02 cable)", "9600/8n1/rts=0/dtr=1", |
| | 849 | VC870_PACKET_SIZE, 0, 0, NULL, |
| | 850 | sr_vc870_packet_valid, sr_vc870_parse, NULL |
| | 851 | ), |
| | 852 | /* }}} */ |
| | 853 | /* vc96 based meters {{{ */ |
| | 854 | DMM( |
| | 855 | "voltcraft-vc96", vc96, |
| | 856 | "Voltcraft", "VC-96", "1200/8n2", |
| | 857 | VC96_PACKET_SIZE, 0, 0, NULL, |
| | 858 | sr_vc96_packet_valid, sr_vc96_parse, |
| | 859 | NULL |
| | 860 | ), |
| | 861 | /* }}} */ |
| | 862 | /* |
| | 863 | * The list is sorted. Add new items in the respective chip's group. |
| | 864 | */ |
| | 865 | ); |
projects / libsigrok.git / blame_incremental