[libsigrok.git] / src / hardware / atten-pps3xxx / api.c

/*
 * This file is part of the libsigrok project.
 *
 * Copyright (C) 2014 Bert Vermeulen <bert@biot.com>
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

#include <config.h>
#include <string.h>
#include "protocol.h"

/*
 * The default serial communication settings on the device are 9600
 * baud, 9 data bits. The 9th bit isn't actually used, and the vendor
 * software uses Mark parity to absorb the extra bit.
 *
 * Since 9 data bits is not a standard available in POSIX, we use two
 * stop bits to skip over the extra bit instead.
 */
#define SERIALCOMM "9600/8n2"

static const uint32_t scanopts[] = {
	SR_CONF_CONN,
	SR_CONF_SERIALCOMM,
};

static const uint32_t drvopts[] = {
	SR_CONF_POWER_SUPPLY,
};

static const uint32_t devopts[] = {
	SR_CONF_CONTINUOUS,
	SR_CONF_CHANNEL_CONFIG | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
	SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET,
};

static const uint32_t devopts_cg[] = {
	SR_CONF_VOLTAGE | SR_CONF_GET,
	SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
	SR_CONF_CURRENT | SR_CONF_GET,
	SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
	SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
};

static const char *channel_modes[] = {
	"Independent",
	"Series",
	"Parallel",
};

static const struct pps_model models[] = {
	{ PPS_3203T_3S, "PPS3203T-3S",
		CHANMODE_INDEPENDENT | CHANMODE_SERIES | CHANMODE_PARALLEL,
		3,
		{
			/* Channel 1 */
			{ { 0, 32, 0.01 }, { 0, 3, 0.001 } },
			/* Channel 2 */
			{ { 0, 32, 0.01 }, { 0, 3, 0.001 } },
			/* Channel 3 */
			{ { 0, 6, 0.01 }, { 0, 3, 0.001 } },
		},
	},
};

static GSList *scan(struct sr_dev_driver *di, GSList *options, int modelid)
{
	struct sr_dev_inst *sdi;
	struct dev_context *devc;
	struct sr_config *src;
	struct sr_channel *ch;
	struct sr_channel_group *cg;
	struct sr_serial_dev_inst *serial;
	GSList *l;
	const struct pps_model *model;
	uint8_t packet[PACKET_SIZE];
	unsigned int i;
	int delay_ms, ret;
	const char *conn, *serialcomm;
	char channel[10];

	conn = serialcomm = NULL;
	for (l = options; l; l = l->next) {
		src = l->data;
		switch (src->key) {
		case SR_CONF_CONN:
			conn = g_variant_get_string(src->data, NULL);
			break;
		case SR_CONF_SERIALCOMM:
			serialcomm = g_variant_get_string(src->data, NULL);
			break;
		}
	}
	if (!conn)
		return NULL;
	if (!serialcomm)
		serialcomm = SERIALCOMM;

	serial = sr_serial_dev_inst_new(conn, serialcomm);

	if (serial_open(serial, SERIAL_RDWR) != SR_OK)
		return NULL;

	serial_flush(serial);

	/* This is how the vendor software scans for hardware. */
	memset(packet, 0, PACKET_SIZE);
	packet[0] = 0xaa;
	packet[1] = 0xaa;
	delay_ms = serial_timeout(serial, PACKET_SIZE);
	if (serial_write_blocking(serial, packet, PACKET_SIZE, delay_ms) < PACKET_SIZE) {
		sr_err("Unable to write while probing for hardware.");
		return NULL;
	}
	/* The device responds with a 24-byte packet when it receives a packet.
	 * At 9600 baud, 300ms is long enough for it to have arrived. */
	g_usleep(300 * 1000);
	memset(packet, 0, PACKET_SIZE);
	if ((ret = serial_read_nonblocking(serial, packet, PACKET_SIZE)) < 0) {
		sr_err("Unable to read while probing for hardware: %s",
				sr_strerror(ret));
		return NULL;
	}
	if (ret != PACKET_SIZE || packet[0] != 0xaa || packet[1] != 0xaa) {
		/* Doesn't look like an Atten PPS. */
		return NULL;
	}

	model = NULL;
	for (i = 0; i < ARRAY_SIZE(models); i++) {
		if (models[i].modelid == modelid) {
			model = &models[i];
			break;
		}
	}
	if (!model) {
		sr_err("Unknown modelid %d", modelid);
		return NULL;
	}

	sdi = g_malloc0(sizeof(struct sr_dev_inst));
	sdi->status = SR_ST_INACTIVE;
	sdi->vendor = g_strdup("Atten");
	sdi->model = g_strdup(model->name);
	sdi->inst_type = SR_INST_SERIAL;
	sdi->conn = serial;
	for (i = 0; i < MAX_CHANNELS; i++) {
		snprintf(channel, 10, "CH%d", i + 1);
		ch = sr_channel_new(sdi, i, SR_CHANNEL_ANALOG, TRUE, channel);
		cg = g_malloc(sizeof(struct sr_channel_group));
		cg->name = g_strdup(channel);
		cg->channels = g_slist_append(NULL, ch);
		cg->priv = NULL;
		sdi->channel_groups = g_slist_append(sdi->channel_groups, cg);
	}

	devc = g_malloc0(sizeof(struct dev_context));
	devc->model = model;
	devc->config = g_malloc0(sizeof(struct per_channel_config) * model->num_channels);
	devc->delay_ms = delay_ms;
	sdi->priv = devc;

	serial_close(serial);

	return std_scan_complete(di, g_slist_append(NULL, sdi));
}

static GSList *scan_3203(struct sr_dev_driver *di, GSList *options)
{
	return scan(di, options, PPS_3203T_3S);
}

static int config_get(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi,
		const struct sr_channel_group *cg)
{
	struct dev_context *devc;
	struct sr_channel *ch;
	int channel, ret;

	if (!sdi)
		return SR_ERR_ARG;

	devc = sdi->priv;

	ret = SR_OK;
	if (!cg) {
		/* No channel group: global options. */
		switch (key) {
		case SR_CONF_CHANNEL_CONFIG:
			*data = g_variant_new_string(channel_modes[devc->channel_mode]);
			break;
		case SR_CONF_OVER_CURRENT_PROTECTION_ENABLED:
			*data = g_variant_new_boolean(devc->over_current_protection);
			break;
		default:
			return SR_ERR_NA;
		}
	} else {
		/* We only ever have one channel per channel group in this driver. */
		ch = cg->channels->data;
		channel = ch->index;

		switch (key) {
		case SR_CONF_VOLTAGE:
			*data = g_variant_new_double(devc->config[channel].output_voltage_last);
			break;
		case SR_CONF_VOLTAGE_TARGET:
			*data = g_variant_new_double(devc->config[channel].output_voltage_max);
			break;
		case SR_CONF_CURRENT:
			*data = g_variant_new_double(devc->config[channel].output_current_last);
			break;
		case SR_CONF_CURRENT_LIMIT:
			*data = g_variant_new_double(devc->config[channel].output_current_max);
			break;
		case SR_CONF_ENABLED:
			*data = g_variant_new_boolean(devc->config[channel].output_enabled);
			break;
		default:
			return SR_ERR_NA;
		}
	}

	return ret;
}

static int find_str(const char *str, const char **strings, int array_size)
{
	int idx, i;

	idx = -1;
	for (i = 0; i < array_size; i++) {
		if (!strcmp(str, strings[i])) {
			idx = i;
			break;
		}
	}

	return idx;
}

static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sdi,
		const struct sr_channel_group *cg)
{
	struct dev_context *devc;
	struct sr_channel *ch;
	gdouble dval;
	int channel, ret, ival;
	const char *sval;
	gboolean bval;

	ret = SR_OK;
	devc = sdi->priv;
	if (!cg) {
		/* No channel group: global options. */
		switch (key) {
		case SR_CONF_CHANNEL_CONFIG:
			sval = g_variant_get_string(data, NULL);
			if ((ival = find_str(sval, channel_modes,
							ARRAY_SIZE(channel_modes))) == -1) {
				ret = SR_ERR_ARG;
				break;
			}
			if (devc->model->channel_modes && (1 << ival) == 0) {
				/* Not supported on this model. */
				ret = SR_ERR_ARG;
			}
			if (ival == devc->channel_mode_set)
				/* Nothing to do. */
				break;
			devc->channel_mode_set = ival;
			devc->config_dirty = TRUE;
			break;
		case SR_CONF_OVER_CURRENT_PROTECTION_ENABLED:
			bval = g_variant_get_boolean(data);
			if (bval == devc->over_current_protection_set)
				/* Nothing to do. */
				break;
			devc->over_current_protection_set = bval;
			devc->config_dirty = TRUE;
			break;
		default:
			return SR_ERR_NA;
		}
	} else {
		/* Channel group specified: per-channel options. */
		/* We only ever have one channel per channel group in this driver. */
		ch = cg->channels->data;
		channel = ch->index;

		switch (key) {
		case SR_CONF_VOLTAGE_TARGET:
			dval = g_variant_get_double(data);
			if (dval < 0 || dval > devc->model->channels[channel].voltage[1])
				ret = SR_ERR_ARG;
			devc->config[channel].output_voltage_max = dval;
			devc->config_dirty = TRUE;
			break;
		case SR_CONF_CURRENT_LIMIT:
			dval = g_variant_get_double(data);
			if (dval < 0 || dval > devc->model->channels[channel].current[1])
				ret = SR_ERR_ARG;
			devc->config[channel].output_current_max = dval;
			devc->config_dirty = TRUE;
			break;
		case SR_CONF_ENABLED:
			bval = g_variant_get_boolean(data);
			if (bval == devc->config[channel].output_enabled_set)
				/* Nothing to do. */
				break;
			devc->config[channel].output_enabled_set = bval;
			devc->config_dirty = TRUE;
			break;
		default:
			ret = SR_ERR_NA;
		}
	}

	return ret;
}

static int config_list(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi,
		const struct sr_channel_group *cg)
{
	struct dev_context *devc;
	struct sr_channel *ch;
	GVariant *gvar;
	GVariantBuilder gvb;
	int channel, ret, i;

	/* Always available. */
	if (key == SR_CONF_SCAN_OPTIONS) {
		*data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
				scanopts, ARRAY_SIZE(scanopts), sizeof(uint32_t));
		return SR_OK;
	}

	if (key == SR_CONF_DEVICE_OPTIONS && !sdi) {
		*data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
				drvopts, ARRAY_SIZE(drvopts), sizeof(uint32_t));
		return SR_OK;
	}

	if (!sdi)
		return SR_ERR_ARG;

	devc = sdi->priv;
	ret = SR_OK;
	if (!cg) {
		/* No channel group: global options. */
		switch (key) {
		case SR_CONF_DEVICE_OPTIONS:
			*data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
					devopts, ARRAY_SIZE(devopts), sizeof(uint32_t));
			break;
		case SR_CONF_CHANNEL_CONFIG:
			if (devc->model->channel_modes == CHANMODE_INDEPENDENT) {
				/* The 1-channel models. */
				*data = g_variant_new_strv(channel_modes, 1);
			} else {
				/* The other models support all modes. */
				*data = g_variant_new_strv(channel_modes, ARRAY_SIZE(channel_modes));
			}
			break;
		default:
			return SR_ERR_NA;
		}
	} else {
		/* Channel group specified: per-channel options. */
		if (!sdi)
			return SR_ERR_ARG;
		/* We only ever have one channel per channel group in this driver. */
		ch = cg->channels->data;
		channel = ch->index;

		switch (key) {
		case SR_CONF_DEVICE_OPTIONS:
			*data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
					devopts_cg, ARRAY_SIZE(devopts_cg), sizeof(uint32_t));
			break;
		case SR_CONF_VOLTAGE_TARGET:
			g_variant_builder_init(&gvb, G_VARIANT_TYPE_ARRAY);
			/* Min, max, step. */
			for (i = 0; i < 3; i++) {
				gvar = g_variant_new_double(devc->model->channels[channel].voltage[i]);
				g_variant_builder_add_value(&gvb, gvar);
			}
			*data = g_variant_builder_end(&gvb);
			break;
		case SR_CONF_CURRENT_LIMIT:
			g_variant_builder_init(&gvb, G_VARIANT_TYPE_ARRAY);
			/* Min, max, step. */
			for (i = 0; i < 3; i++) {
				gvar = g_variant_new_double(devc->model->channels[channel].current[i]);
				g_variant_builder_add_value(&gvb, gvar);
			}
			*data = g_variant_builder_end(&gvb);
			break;
		default:
			return SR_ERR_NA;
		}
	}

	return ret;
}

static int dev_close(struct sr_dev_inst *sdi)
{
	struct dev_context *devc;

	devc = sdi->priv;

	if (devc->config_dirty)
		/* Some configuration changes were queued up but didn't
		 * get sent to the device, likely because we were never
		 * in acquisition mode. Send them out now. */
		send_config(sdi);

	return std_serial_dev_close(sdi);
}

static int dev_acquisition_start(const struct sr_dev_inst *sdi)
{
	struct dev_context *devc;
	struct sr_serial_dev_inst *serial;
	uint8_t packet[PACKET_SIZE];

	devc = sdi->priv;
	memset(devc->packet, 0x44, PACKET_SIZE);
	devc->packet_size = 0;

	devc->acquisition_running = TRUE;

	serial = sdi->conn;
	serial_source_add(sdi->session, serial, G_IO_IN, 50,
			atten_pps3xxx_receive_data, (void *)sdi);
	std_session_send_df_header(sdi);

	/* Send a "channel" configuration packet now. */
	memset(packet, 0, PACKET_SIZE);
	packet[0] = 0xaa;
	packet[1] = 0xaa;
	send_packet(sdi, packet);

	return SR_OK;
}

static int dev_acquisition_stop(struct sr_dev_inst *sdi)
{
	struct dev_context *devc;

	devc = sdi->priv;
	devc->acquisition_running = FALSE;

	return SR_OK;
}

static struct sr_dev_driver atten_pps3203_driver_info = {
	.name = "atten-pps3203",
	.longname = "Atten PPS3203T-3S",
	.api_version = 1,
	.init = std_init,
	.cleanup = std_cleanup,
	.scan = scan_3203,
	.dev_list = std_dev_list,
	.dev_clear = NULL,
	.config_get = config_get,
	.config_set = config_set,
	.config_list = config_list,
	.dev_open = std_serial_dev_open,
	.dev_close = dev_close,
	.dev_acquisition_start = dev_acquisition_start,
	.dev_acquisition_stop = dev_acquisition_stop,
	.context = NULL,
};
SR_REGISTER_DEV_DRIVER(atten_pps3203_driver_info);
Commit	Line	Data
fa0d6afe BV	1	/*
	2	* This file is part of the libsigrok project.
	3	*
	4	* Copyright (C) 2014 Bert Vermeulen <bert@biot.com>
	5	*
	6	* This program is free software: you can redistribute it and/or modify
	7	* it under the terms of the GNU General Public License as published by
	8	* the Free Software Foundation, either version 3 of the License, or
	9	* (at your option) any later version.
	10	*
	11	* This program is distributed in the hope that it will be useful,
	12	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	13	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	14	* GNU General Public License for more details.
	15	*
	16	* You should have received a copy of the GNU General Public License
	17	* along with this program. If not, see <http://www.gnu.org/licenses/>.
	18	*/
	19
6ec6c43b	20	#include <config.h>
33c40990	21	#include <string.h>
fa0d6afe BV	22	#include "protocol.h"
fa0d6afe BV	23
33c40990 BV	24	/*
	25	* The default serial communication settings on the device are 9600
	26	* baud, 9 data bits. The 9th bit isn't actually used, and the vendor
	27	* software uses Mark parity to absorb the extra bit.
	28	*
	29	* Since 9 data bits is not a standard available in POSIX, we use two
	30	* stop bits to skip over the extra bit instead.
	31	*/
	32	#define SERIALCOMM "9600/8n2"
	33
584560f1	34	static const uint32_t scanopts[] = {
33c40990 BV	35	SR_CONF_CONN,
	36	SR_CONF_SERIALCOMM,
	37	};
	38
1f889afd	39	static const uint32_t drvopts[] = {
33c40990	40	SR_CONF_POWER_SUPPLY,
d6fa8ace BV	41	};
d6fa8ace BV	42
1f889afd	43	static const uint32_t devopts[] = {
e91bb0a6	44	SR_CONF_CONTINUOUS,
7a0b98b5	45	SR_CONF_CHANNEL_CONFIG \| SR_CONF_GET \| SR_CONF_SET \| SR_CONF_LIST,
5827f61b	46	SR_CONF_OVER_CURRENT_PROTECTION_ENABLED \| SR_CONF_GET \| SR_CONF_SET,
33c40990 BV	47	};
33c40990 BV	48
584560f1	49	static const uint32_t devopts_cg[] = {
7a0b98b5 AJ	50	SR_CONF_VOLTAGE \| SR_CONF_GET,
	51	SR_CONF_VOLTAGE_TARGET \| SR_CONF_GET \| SR_CONF_SET \| SR_CONF_LIST,
	52	SR_CONF_CURRENT \| SR_CONF_GET,
	53	SR_CONF_CURRENT_LIMIT \| SR_CONF_GET \| SR_CONF_SET \| SR_CONF_LIST,
	54	SR_CONF_ENABLED \| SR_CONF_GET \| SR_CONF_SET,
33c40990 BV	55	};
	56
	57	static const char *channel_modes[] = {
	58	"Independent",
	59	"Series",
	60	"Parallel",
	61	};
	62
329733d9	63	static const struct pps_model models[] = {
33c40990 BV	64	{ PPS_3203T_3S, "PPS3203T-3S",
	65	CHANMODE_INDEPENDENT \| CHANMODE_SERIES \| CHANMODE_PARALLEL,
	66	3,
	67	{
	68	/* Channel 1 */
	69	{ { 0, 32, 0.01 }, { 0, 3, 0.001 } },
	70	/* Channel 2 */
	71	{ { 0, 32, 0.01 }, { 0, 3, 0.001 } },
	72	/* Channel 3 */
	73	{ { 0, 6, 0.01 }, { 0, 3, 0.001 } },
	74	},
	75	},
	76	};
	77
4f840ce9	78	static GSList scan(struct sr_dev_driver di, GSList *options, int modelid)
fa0d6afe	79	{
33c40990	80	struct sr_dev_inst *sdi;
33c40990 BV	81	struct dev_context *devc;
33c40990 BV	82	struct sr_config *src;
ba7dd8bb	83	struct sr_channel *ch;
40fd0264	84	struct sr_channel_group *cg;
33c40990	85	struct sr_serial_dev_inst *serial;
43376f33	86	GSList *l;
329733d9	87	const struct pps_model *model;
33c40990 BV	88	uint8_t packet[PACKET_SIZE];
33c40990 BV	89	unsigned int i;
2eb1612d	90	int delay_ms, ret;
33c40990 BV	91	const char conn, serialcomm;
33c40990 BV	92	char channel[10];
fa0d6afe	93
33c40990 BV	94	conn = serialcomm = NULL;
	95	for (l = options; l; l = l->next) {
	96	src = l->data;
	97	switch (src->key) {
	98	case SR_CONF_CONN:
	99	conn = g_variant_get_string(src->data, NULL);
	100	break;
	101	case SR_CONF_SERIALCOMM:
	102	serialcomm = g_variant_get_string(src->data, NULL);
	103	break;
	104	}
	105	}
	106	if (!conn)
	107	return NULL;
	108	if (!serialcomm)
	109	serialcomm = SERIALCOMM;
	110
91219afc	111	serial = sr_serial_dev_inst_new(conn, serialcomm);
33c40990	112
5305266a	113	if (serial_open(serial, SERIAL_RDWR) != SR_OK)
33c40990	114	return NULL;
91219afc	115
33c40990 BV	116	serial_flush(serial);
33c40990 BV	117
945cfd4f	118	/* This is how the vendor software scans for hardware. */
33c40990 BV	119	memset(packet, 0, PACKET_SIZE);
	120	packet[0] = 0xaa;
	121	packet[1] = 0xaa;
2eb1612d BV	122	delay_ms = serial_timeout(serial, PACKET_SIZE);
2eb1612d BV	123	if (serial_write_blocking(serial, packet, PACKET_SIZE, delay_ms) < PACKET_SIZE) {
081c214e	124	sr_err("Unable to write while probing for hardware.");
33c40990 BV	125	return NULL;
	126	}
	127	/* The device responds with a 24-byte packet when it receives a packet.
	128	* At 9600 baud, 300ms is long enough for it to have arrived. */
	129	g_usleep(300 * 1000);
	130	memset(packet, 0, PACKET_SIZE);
	131	if ((ret = serial_read_nonblocking(serial, packet, PACKET_SIZE)) < 0) {
	132	sr_err("Unable to read while probing for hardware: %s",
8d522801	133	sr_strerror(ret));
33c40990 BV	134	return NULL;
	135	}
	136	if (ret != PACKET_SIZE \|\| packet[0] != 0xaa \|\| packet[1] != 0xaa) {
	137	/* Doesn't look like an Atten PPS. */
	138	return NULL;
	139	}
	140
	141	model = NULL;
	142	for (i = 0; i < ARRAY_SIZE(models); i++) {
	143	if (models[i].modelid == modelid) {
	144	model = &models[i];
	145	break;
	146	}
	147	}
	148	if (!model) {
	149	sr_err("Unknown modelid %d", modelid);
	150	return NULL;
	151	}
	152
aac29cc1	153	sdi = g_malloc0(sizeof(struct sr_dev_inst));
0af636be UH	154	sdi->status = SR_ST_INACTIVE;
	155	sdi->vendor = g_strdup("Atten");
	156	sdi->model = g_strdup(model->name);
33c40990 BV	157	sdi->inst_type = SR_INST_SERIAL;
	158	sdi->conn = serial;
	159	for (i = 0; i < MAX_CHANNELS; i++) {
	160	snprintf(channel, 10, "CH%d", i + 1);
5e23fcab	161	ch = sr_channel_new(sdi, i, SR_CHANNEL_ANALOG, TRUE, channel);
40fd0264 UH	162	cg = g_malloc(sizeof(struct sr_channel_group));
40fd0264 UH	163	cg->name = g_strdup(channel);
ba7dd8bb	164	cg->channels = g_slist_append(NULL, ch);
40fd0264 UH	165	cg->priv = NULL;
40fd0264 UH	166	sdi->channel_groups = g_slist_append(sdi->channel_groups, cg);
33c40990 BV	167	}
	168
	169	devc = g_malloc0(sizeof(struct dev_context));
	170	devc->model = model;
	171	devc->config = g_malloc0(sizeof(struct per_channel_config) * model->num_channels);
2eb1612d	172	devc->delay_ms = delay_ms;
33c40990	173	sdi->priv = devc;
33c40990 BV	174
33c40990 BV	175	serial_close(serial);
fa0d6afe	176
43376f33	177	return std_scan_complete(di, g_slist_append(NULL, sdi));
fa0d6afe BV	178	}
fa0d6afe BV	179
4f840ce9	180	static GSList scan_3203(struct sr_dev_driver di, GSList *options)
33c40990	181	{
4f840ce9	182	return scan(di, options, PPS_3203T_3S);
33c40990 BV	183	}
33c40990 BV	184
584560f1	185	static int config_get(uint32_t key, GVariant *data, const struct sr_dev_inst sdi,
53b4680f	186	const struct sr_channel_group *cg)
fa0d6afe	187	{
33c40990	188	struct dev_context *devc;
ba7dd8bb	189	struct sr_channel *ch;
33c40990 BV	190	int channel, ret;
	191
	192	if (!sdi)
	193	return SR_ERR_ARG;
fa0d6afe	194
33c40990	195	devc = sdi->priv;
fa0d6afe BV	196
fa0d6afe BV	197	ret = SR_OK;
53b4680f	198	if (!cg) {
660e398f	199	/* No channel group: global options. */
33c40990	200	switch (key) {
7a0b98b5	201	case SR_CONF_CHANNEL_CONFIG:
fe997353	202	*data = g_variant_new_string(channel_modes[devc->channel_mode]);
33c40990	203	break;
a1eaa9e0	204	case SR_CONF_OVER_CURRENT_PROTECTION_ENABLED:
33c40990 BV	205	*data = g_variant_new_boolean(devc->over_current_protection);
	206	break;
	207	default:
	208	return SR_ERR_NA;
	209	}
	210	} else {
660e398f	211	/* We only ever have one channel per channel group in this driver. */
ba7dd8bb UH	212	ch = cg->channels->data;
ba7dd8bb UH	213	channel = ch->index;
33c40990 BV	214
33c40990 BV	215	switch (key) {
7a0b98b5	216	case SR_CONF_VOLTAGE:
33c40990 BV	217	*data = g_variant_new_double(devc->config[channel].output_voltage_last);
33c40990 BV	218	break;
7a0b98b5	219	case SR_CONF_VOLTAGE_TARGET:
33c40990 BV	220	*data = g_variant_new_double(devc->config[channel].output_voltage_max);
33c40990 BV	221	break;
7a0b98b5	222	case SR_CONF_CURRENT:
33c40990 BV	223	*data = g_variant_new_double(devc->config[channel].output_current_last);
33c40990 BV	224	break;
7a0b98b5	225	case SR_CONF_CURRENT_LIMIT:
33c40990 BV	226	*data = g_variant_new_double(devc->config[channel].output_current_max);
33c40990 BV	227	break;
7a0b98b5	228	case SR_CONF_ENABLED:
33c40990 BV	229	*data = g_variant_new_boolean(devc->config[channel].output_enabled);
	230	break;
	231	default:
	232	return SR_ERR_NA;
	233	}
fa0d6afe BV	234	}
	235
	236	return ret;
	237	}
	238
33c40990 BV	239	static int find_str(const char str, const char *strings, int array_size)
	240	{
	241	int idx, i;
	242
	243	idx = -1;
	244	for (i = 0; i < array_size; i++) {
	245	if (!strcmp(str, strings[i])) {
	246	idx = i;
	247	break;
	248	}
	249	}
	250
	251	return idx;
	252	}
	253
584560f1	254	static int config_set(uint32_t key, GVariant data, const struct sr_dev_inst sdi,
53b4680f	255	const struct sr_channel_group *cg)
fa0d6afe	256	{
33c40990	257	struct dev_context *devc;
ba7dd8bb	258	struct sr_channel *ch;
33c40990 BV	259	gdouble dval;
	260	int channel, ret, ival;
	261	const char *sval;
	262	gboolean bval;
fa0d6afe	263
fa0d6afe	264	ret = SR_OK;
33c40990	265	devc = sdi->priv;
53b4680f	266	if (!cg) {
660e398f	267	/* No channel group: global options. */
33c40990	268	switch (key) {
7a0b98b5	269	case SR_CONF_CHANNEL_CONFIG:
33c40990 BV	270	sval = g_variant_get_string(data, NULL);
	271	if ((ival = find_str(sval, channel_modes,
	272	ARRAY_SIZE(channel_modes))) == -1) {
	273	ret = SR_ERR_ARG;
	274	break;
	275	}
	276	if (devc->model->channel_modes && (1 << ival) == 0) {
	277	/* Not supported on this model. */
	278	ret = SR_ERR_ARG;
	279	}
	280	if (ival == devc->channel_mode_set)
	281	/* Nothing to do. */
	282	break;
	283	devc->channel_mode_set = ival;
ab988ecb	284	devc->config_dirty = TRUE;
33c40990	285	break;
a1eaa9e0	286	case SR_CONF_OVER_CURRENT_PROTECTION_ENABLED:
33c40990 BV	287	bval = g_variant_get_boolean(data);
	288	if (bval == devc->over_current_protection_set)
	289	/* Nothing to do. */
	290	break;
	291	devc->over_current_protection_set = bval;
ab988ecb	292	devc->config_dirty = TRUE;
33c40990 BV	293	break;
	294	default:
	295	return SR_ERR_NA;
	296	}
	297	} else {
660e398f UH	298	/* Channel group specified: per-channel options. */
660e398f UH	299	/* We only ever have one channel per channel group in this driver. */
ba7dd8bb UH	300	ch = cg->channels->data;
ba7dd8bb UH	301	channel = ch->index;
33c40990 BV	302
33c40990 BV	303	switch (key) {
7a0b98b5	304	case SR_CONF_VOLTAGE_TARGET:
33c40990 BV	305	dval = g_variant_get_double(data);
	306	if (dval < 0 \|\| dval > devc->model->channels[channel].voltage[1])
	307	ret = SR_ERR_ARG;
	308	devc->config[channel].output_voltage_max = dval;
ab988ecb	309	devc->config_dirty = TRUE;
33c40990	310	break;
7a0b98b5	311	case SR_CONF_CURRENT_LIMIT:
33c40990 BV	312	dval = g_variant_get_double(data);
	313	if (dval < 0 \|\| dval > devc->model->channels[channel].current[1])
	314	ret = SR_ERR_ARG;
	315	devc->config[channel].output_current_max = dval;
ab988ecb	316	devc->config_dirty = TRUE;
33c40990	317	break;
7a0b98b5	318	case SR_CONF_ENABLED:
33c40990 BV	319	bval = g_variant_get_boolean(data);
	320	if (bval == devc->config[channel].output_enabled_set)
	321	/* Nothing to do. */
	322	break;
	323	devc->config[channel].output_enabled_set = bval;
ab988ecb	324	devc->config_dirty = TRUE;
33c40990 BV	325	break;
	326	default:
	327	ret = SR_ERR_NA;
	328	}
fa0d6afe BV	329	}
	330
	331	return ret;
	332	}
	333
584560f1	334	static int config_list(uint32_t key, GVariant *data, const struct sr_dev_inst sdi,
53b4680f	335	const struct sr_channel_group *cg)
fa0d6afe	336	{
33c40990	337	struct dev_context *devc;
ba7dd8bb	338	struct sr_channel *ch;
33c40990 BV	339	GVariant *gvar;
	340	GVariantBuilder gvb;
	341	int channel, ret, i;
	342
d6fa8ace	343	/* Always available. */
33c40990	344	if (key == SR_CONF_SCAN_OPTIONS) {
584560f1 BV	345	*data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
584560f1 BV	346	scanopts, ARRAY_SIZE(scanopts), sizeof(uint32_t));
33c40990 BV	347	return SR_OK;
	348	}
	349
d6fa8ace BV	350	if (key == SR_CONF_DEVICE_OPTIONS && !sdi) {
d6fa8ace BV	351	*data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
1f889afd	352	drvopts, ARRAY_SIZE(drvopts), sizeof(uint32_t));
d6fa8ace BV	353	return SR_OK;
	354	}
	355
e22aa878 BV	356	if (!sdi)
e22aa878 BV	357	return SR_ERR_ARG;
fa0d6afe	358
d6fa8ace	359	devc = sdi->priv;
fa0d6afe	360	ret = SR_OK;
53b4680f	361	if (!cg) {
660e398f	362	/* No channel group: global options. */
33c40990 BV	363	switch (key) {
33c40990 BV	364	case SR_CONF_DEVICE_OPTIONS:
584560f1	365	*data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
1f889afd	366	devopts, ARRAY_SIZE(devopts), sizeof(uint32_t));
33c40990	367	break;
7a0b98b5	368	case SR_CONF_CHANNEL_CONFIG:
33c40990 BV	369	if (devc->model->channel_modes == CHANMODE_INDEPENDENT) {
	370	/* The 1-channel models. */
	371	*data = g_variant_new_strv(channel_modes, 1);
	372	} else {
	373	/* The other models support all modes. */
	374	*data = g_variant_new_strv(channel_modes, ARRAY_SIZE(channel_modes));
	375	}
	376	break;
	377	default:
	378	return SR_ERR_NA;
	379	}
	380	} else {
660e398f	381	/* Channel group specified: per-channel options. */
33c40990 BV	382	if (!sdi)
33c40990 BV	383	return SR_ERR_ARG;
660e398f	384	/* We only ever have one channel per channel group in this driver. */
ba7dd8bb UH	385	ch = cg->channels->data;
ba7dd8bb UH	386	channel = ch->index;
33c40990 BV	387
	388	switch (key) {
	389	case SR_CONF_DEVICE_OPTIONS:
584560f1 BV	390	*data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
584560f1 BV	391	devopts_cg, ARRAY_SIZE(devopts_cg), sizeof(uint32_t));
33c40990	392	break;
7a0b98b5	393	case SR_CONF_VOLTAGE_TARGET:
33c40990 BV	394	g_variant_builder_init(&gvb, G_VARIANT_TYPE_ARRAY);
	395	/* Min, max, step. */
	396	for (i = 0; i < 3; i++) {
	397	gvar = g_variant_new_double(devc->model->channels[channel].voltage[i]);
	398	g_variant_builder_add_value(&gvb, gvar);
	399	}
	400	*data = g_variant_builder_end(&gvb);
	401	break;
7a0b98b5	402	case SR_CONF_CURRENT_LIMIT:
33c40990 BV	403	g_variant_builder_init(&gvb, G_VARIANT_TYPE_ARRAY);
	404	/* Min, max, step. */
	405	for (i = 0; i < 3; i++) {
	406	gvar = g_variant_new_double(devc->model->channels[channel].current[i]);
	407	g_variant_builder_add_value(&gvb, gvar);
	408	}
	409	*data = g_variant_builder_end(&gvb);
	410	break;
	411	default:
	412	return SR_ERR_NA;
	413	}
fa0d6afe BV	414	}
	415
	416	return ret;
	417	}
	418
ab988ecb BV	419	static int dev_close(struct sr_dev_inst *sdi)
	420	{
	421	struct dev_context *devc;
	422
	423	devc = sdi->priv;
f1ba6b4b	424
ab988ecb BV	425	if (devc->config_dirty)
	426	/* Some configuration changes were queued up but didn't
	427	* get sent to the device, likely because we were never
	428	* in acquisition mode. Send them out now. */
	429	send_config(sdi);
	430
	431	return std_serial_dev_close(sdi);
	432	}
	433
695dc859	434	static int dev_acquisition_start(const struct sr_dev_inst *sdi)
fa0d6afe	435	{
33c40990 BV	436	struct dev_context *devc;
	437	struct sr_serial_dev_inst *serial;
	438	uint8_t packet[PACKET_SIZE];
	439
33c40990 BV	440	devc = sdi->priv;
	441	memset(devc->packet, 0x44, PACKET_SIZE);
	442	devc->packet_size = 0;
	443
	444	devc->acquisition_running = TRUE;
	445
	446	serial = sdi->conn;
102f1239 BV	447	serial_source_add(sdi->session, serial, G_IO_IN, 50,
102f1239 BV	448	atten_pps3xxx_receive_data, (void *)sdi);
bee2b016	449	std_session_send_df_header(sdi);
33c40990	450
ba7dd8bb	451	/* Send a "channel" configuration packet now. */
33c40990 BV	452	memset(packet, 0, PACKET_SIZE);
	453	packet[0] = 0xaa;
	454	packet[1] = 0xaa;
	455	send_packet(sdi, packet);
fa0d6afe BV	456
	457	return SR_OK;
	458	}
	459
695dc859	460	static int dev_acquisition_stop(struct sr_dev_inst *sdi)
fa0d6afe	461	{
33c40990 BV	462	struct dev_context *devc;
33c40990 BV	463
33c40990 BV	464	devc = sdi->priv;
33c40990 BV	465	devc->acquisition_running = FALSE;
fa0d6afe BV	466
	467	return SR_OK;
	468	}
	469
dd5c48a6	470	static struct sr_dev_driver atten_pps3203_driver_info = {
33c40990 BV	471	.name = "atten-pps3203",
33c40990 BV	472	.longname = "Atten PPS3203T-3S",
fa0d6afe	473	.api_version = 1,
c2fdcc25	474	.init = std_init,
700d6b64	475	.cleanup = std_cleanup,
33c40990	476	.scan = scan_3203,
c01bf34c	477	.dev_list = std_dev_list,
a6630742	478	.dev_clear = NULL,
fa0d6afe BV	479	.config_get = config_get,
	480	.config_set = config_set,
	481	.config_list = config_list,
33c40990	482	.dev_open = std_serial_dev_open,
ab988ecb	483	.dev_close = dev_close,
fa0d6afe BV	484	.dev_acquisition_start = dev_acquisition_start,
fa0d6afe BV	485	.dev_acquisition_stop = dev_acquisition_stop,
41812aca	486	.context = NULL,
fa0d6afe	487	};
dd5c48a6	488	SR_REGISTER_DEV_DRIVER(atten_pps3203_driver_info);