TabularDecView: Increase robustness

[pulseview.git] / l10n / de.ts

diff --git a/l10n/de.ts b/l10n/de.ts
index c9e206603f1447799aa8ab7d2d7beec4ebe5a108..94c0901504096bf1ce5473dd19521ea925223acc 100644 (file)
--- a/l10n/de.ts
+++ b/l10n/de.ts
@@ -47,7 +47,7 @@
 <context>
     <name>QHexView</name>
     <message>
-        <location filename="../pv/views/decoder_output/QHexView.cpp" line="286"/>
+        <location filename="../pv/views/decoder_binary/QHexView.cpp" line="288"/>
         <source>No data available</source>
         <translation>Keine Daten vorhanden</translation>
     </message>
@@ -99,60 +99,61 @@ A human-readable form has been saved to disk and was written to the log. You may
         <translation></translation>
     </message>
     <message>
-        <location filename="../pv/mainwindow.cpp" line="274"/>
+        <location filename="../pv/mainwindow.cpp" line="276"/>
         <source>Decoder Selector</source>
         <translation>Protokolldekoder</translation>
     </message>
     <message>
-        <location filename="../pv/mainwindow.cpp" line="327"/>
+        <location filename="../pv/mainwindow.cpp" line="329"/>
         <source>Session %1</source>
         <translation>Analysesitzung %1</translation>
     </message>
     <message>
-        <location filename="../pv/mainwindow.cpp" line="509"/>
+        <location filename="../pv/mainwindow.cpp" line="511"/>
         <source>Create New Session</source>
         <translation>Neue Analysesitzung</translation>
     </message>
     <message>
-        <location filename="../pv/mainwindow.cpp" line="515"/>
+        <location filename="../pv/mainwindow.cpp" line="517"/>
         <source>Start/Stop Acquisition</source>
         <translation>Datenerfassung starten/stoppen</translation>
     </message>
     <message>
-        <location filename="../pv/mainwindow.cpp" line="523"/>
+        <location filename="../pv/mainwindow.cpp" line="525"/>
         <source>Settings</source>
         <translation>Einstellungen</translation>
     </message>
     <message>
-        <location filename="../pv/mainwindow.cpp" line="573"/>
+        <location filename="../pv/mainwindow.cpp" line="577"/>
         <source>Reload</source>
         <translation>Neu laden</translation>
     </message>
     <message>
-        <location filename="../pv/mainwindow.cpp" line="624"/>
-        <location filename="../pv/mainwindow.cpp" line="818"/>
-        <location filename="../pv/mainwindow.cpp" line="844"/>
+        <location filename="../pv/mainwindow.cpp" line="632"/>
+        <location filename="../pv/mainwindow.cpp" line="826"/>
+        <location filename="../pv/mainwindow.cpp" line="852"/>
         <source>Confirmation</source>
         <translation>Bestätigung</translation>
     </message>
     <message>
-        <location filename="../pv/mainwindow.cpp" line="625"/>
+        <location filename="../pv/mainwindow.cpp" line="633"/>
         <source>There is unsaved data. Close anyway?</source>
         <translation>Es gibt noch ungespeicherte Daten. Trotzdem beenden?</translation>
     </message>
     <message>
-        <location filename="../pv/mainwindow.cpp" line="573"/>
+        <location filename="../pv/mainwindow.cpp" line="577"/>
+        <location filename="../pv/mainwindow.cpp" line="580"/>
         <source>Run</source>
         <translation>Starten</translation>
     </message>
     <message>
-        <location filename="../pv/mainwindow.cpp" line="578"/>
+        <location filename="../pv/mainwindow.cpp" line="586"/>
         <source>Stop</source>
         <translation>Stoppen</translation>
     </message>
     <message>
-        <location filename="../pv/mainwindow.cpp" line="819"/>
-        <location filename="../pv/mainwindow.cpp" line="845"/>
+        <location filename="../pv/mainwindow.cpp" line="827"/>
+        <location filename="../pv/mainwindow.cpp" line="853"/>
         <source>This session contains unsaved data. Close it anyway?</source>
         <translation>Die Daten dieser Analysesitzung wurden nicht gespeichert. Trotzdem schließen?</translation>
     </message>
@@ -160,47 +161,47 @@ A human-readable form has been saved to disk and was written to the log. You may
 <context>
     <name>pv::Session</name>
     <message>
-        <location filename="../pv/session.cpp" line="409"/>
+        <location filename="../pv/session.cpp" line="481"/>
         <source>Failed to select device</source>
         <translation>Fehler beim Auswählen des Gerätes</translation>
     </message>
     <message>
-        <location filename="../pv/session.cpp" line="458"/>
+        <location filename="../pv/session.cpp" line="530"/>
         <source>Failed to open device</source>
         <translation>Fehler beim Öffnen des Gerätes</translation>
     </message>
     <message>
-        <location filename="../pv/session.cpp" line="560"/>
+        <location filename="../pv/session.cpp" line="632"/>
         <source>Error</source>
         <translation>Fehler</translation>
     </message>
     <message>
-        <location filename="../pv/session.cpp" line="561"/>
+        <location filename="../pv/session.cpp" line="633"/>
         <source>Unexpected input format: %s</source>
         <translation>Unerwartetes Importformat: %s</translation>
     </message>
     <message>
-        <location filename="../pv/session.cpp" line="596"/>
+        <location filename="../pv/session.cpp" line="668"/>
         <source>Failed to load %1</source>
         <translation>Fehler beim Laden von %1</translation>
     </message>
     <message>
-        <location filename="../pv/session.cpp" line="631"/>
+        <location filename="../pv/session.cpp" line="703"/>
         <source>No active device set, can&apos;t start acquisition.</source>
         <translation>Kein Gerät aktiv, kann Datenerfassung nicht starten.</translation>
     </message>
     <message>
-        <location filename="../pv/session.cpp" line="644"/>
+        <location filename="../pv/session.cpp" line="716"/>
         <source>No channels enabled.</source>
         <translation>Keine aktiven Kanäle vorhanden.</translation>
     </message>
     <message>
-        <location filename="../pv/session.cpp" line="1095"/>
+        <location filename="../pv/session.cpp" line="1171"/>
         <source>Out of memory, acquisition stopped.</source>
         <translation>Nicht genügend Arbeitsspeicher vorhanden, Datenerfassung wurde gestoppt.</translation>
     </message>
     <message>
-        <location filename="../pv/session.cpp" line="1301"/>
+        <location filename="../pv/session.cpp" line="1377"/>
         <source>Can&apos;t handle more than 64 logic channels.</source>
         <translatorcomment>Internal message</translatorcomment>
         <translation></translation>
@@ -209,28 +210,28 @@ A human-readable form has been saved to disk and was written to the log. You may
 <context>
     <name>pv::StoreSession</name>
     <message>
-        <location filename="../pv/storesession.cpp" line="115"/>
+        <location filename="../pv/storesession.cpp" line="114"/>
         <source>Can&apos;t save logic channel without data.</source>
         <translation>Kann Logikkanal nicht speichern, da er keine Daten beinhaltet.</translation>
     </message>
     <message>
-        <location filename="../pv/storesession.cpp" line="131"/>
+        <location filename="../pv/storesession.cpp" line="130"/>
         <source>Can&apos;t save analog channel without data.</source>
         <translation>Kann Analogkanal nicht speichern, da er keine Daten beinhaltet.</translation>
     </message>
     <message>
-        <location filename="../pv/storesession.cpp" line="143"/>
+        <location filename="../pv/storesession.cpp" line="142"/>
         <source>No channels enabled.</source>
         <translation>Keine Kanäle aktiviert.</translation>
     </message>
     <message>
-        <location filename="../pv/storesession.cpp" line="168"/>
+        <location filename="../pv/storesession.cpp" line="167"/>
         <source>Can&apos;t save range without sample data.</source>
         <translation>In dem gewählten Bereich befinden sich keine Daten zum Speichern.</translation>
     </message>
     <message>
-        <location filename="../pv/storesession.cpp" line="189"/>
-        <location filename="../pv/storesession.cpp" line="296"/>
+        <location filename="../pv/storesession.cpp" line="188"/>
+        <location filename="../pv/storesession.cpp" line="295"/>
         <source>Error while saving: </source>
         <translation>Fehler beim Speichern: </translation>
     </message>
@@ -238,32 +239,32 @@ A human-readable form has been saved to disk and was written to the log. You may
 <context>
     <name>pv::data::DecodeSignal</name>
     <message>
-        <location filename="../pv/data/decodesignal.cpp" line="195"/>
+        <location filename="../pv/data/decodesignal.cpp" line="194"/>
         <source>No decoders</source>
         <translation>Keine Protokolldekoder</translation>
     </message>
     <message>
-        <location filename="../pv/data/decodesignal.cpp" line="202"/>
+        <location filename="../pv/data/decodesignal.cpp" line="201"/>
         <source>There are no channels assigned to this decoder</source>
         <translation>Dem Protokolldekoder sind keine Kanäle zugeordnet</translation>
     </message>
     <message>
-        <location filename="../pv/data/decodesignal.cpp" line="216"/>
+        <location filename="../pv/data/decodesignal.cpp" line="215"/>
         <source>One or more required channels have not been specified</source>
         <translation>Mindestens ein notwendiger Kanal wurde noch nicht zugeordnet</translation>
     </message>
     <message>
-        <location filename="../pv/data/decodesignal.cpp" line="235"/>
+        <location filename="../pv/data/decodesignal.cpp" line="234"/>
         <source>No input data</source>
         <translation>Keine Daten zum Auswerten vorhanden</translation>
     </message>
     <message>
-        <location filename="../pv/data/decodesignal.cpp" line="1161"/>
+        <location filename="../pv/data/decodesignal.cpp" line="1160"/>
         <source>Decoder reported an error</source>
         <translation>Protokolldekoder meldet Fehler</translation>
     </message>
     <message>
-        <location filename="../pv/data/decodesignal.cpp" line="1297"/>
+        <location filename="../pv/data/decodesignal.cpp" line="1296"/>
         <source>Failed to create decoder instance</source>
         <translation>Fehler beim Erzeugen des Protokolldekoders</translation>
     </message>
@@ -557,17 +558,25 @@ A human-readable form has been saved to disk and was written to the log. You may
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="418"/>
+        <source>%s = sample range; %d: decoder name; %r: row name; %c: class name</source>
+        <translation>%s = Start-/Endsample; %d: Dekodername; %r: Name der Reihe; %c: Klassenname</translation>
+    </message>
+    <message>
+        <location filename="../pv/dialogs/settings.cpp" line="421"/>
+        <source>%1: longest annotation text; %a: all annotation texts; %q: use quotation marks</source>
+        <translation>%1: Längste Beschreibung des dekodierten Wertes; %a: Alle Beschreibungen des dekodierten Wertes; %q: Benutze Anführungszeichen</translation>
+    </message>
+    <message>
         <source>%s = sample range; %d: decoder name; %r: row name; %q: use quotation marks</source>
-        <translation>%s = Start-/Endsample; %d: Dekodername; %c Name der Kategorie; %q: Benutze Anführungszeichen</translation>
+        <translation type="vanished">%s = Start-/Endsample; %d: Dekodername; %c Name der Kategorie; %q: Benutze Anführungszeichen</translation>
     </message>
     <message>
         <source>%s = sample range; %d: decoder name; %c: row name; %q: use quotations marks</source>
         <translation type="vanished">%s = Start-/Endsample; %d: Dekodername; %c Name der Kategorie; %q: Benutze Anführungszeichen</translation>
     </message>
     <message>
-        <location filename="../pv/dialogs/settings.cpp" line="421"/>
         <source>%1: longest annotation text; %a: all annotation texts</source>
-        <translation>%1: Längste Beschreibung des dekodierten Wertes; %a: Alle Beschreibungen des dekodierten Wertes</translation>
+        <translation type="vanished">%1: Längste Beschreibung des dekodierten Wertes; %a: Alle Beschreibungen des dekodierten Wertes</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="441"/>
@@ -718,53 +727,61 @@ Bei einer Änderung benötigt PulseView eventuell einen Neustart, damit alles ko
 <context>
     <name>pv::popups::Channels</name>
     <message>
-        <location filename="../pv/popups/channels.cpp" line="61"/>
         <location filename="../pv/popups/channels.cpp" line="62"/>
+        <location filename="../pv/popups/channels.cpp" line="63"/>
+        <location filename="../pv/popups/channels.cpp" line="273"/>
+        <location filename="../pv/popups/channels.cpp" line="300"/>
         <source>All</source>
         <translation>Alle</translation>
     </message>
     <message>
-        <location filename="../pv/popups/channels.cpp" line="63"/>
         <location filename="../pv/popups/channels.cpp" line="64"/>
+        <location filename="../pv/popups/channels.cpp" line="65"/>
         <source>Logic</source>
         <translation>Logik</translation>
     </message>
     <message>
-        <location filename="../pv/popups/channels.cpp" line="65"/>
         <location filename="../pv/popups/channels.cpp" line="66"/>
+        <location filename="../pv/popups/channels.cpp" line="67"/>
         <source>Analog</source>
         <translation>Analog</translation>
     </message>
     <message>
-        <location filename="../pv/popups/channels.cpp" line="67"/>
+        <location filename="../pv/popups/channels.cpp" line="68"/>
         <source>Named</source>
         <translation>Benamte</translation>
     </message>
     <message>
-        <location filename="../pv/popups/channels.cpp" line="68"/>
+        <location filename="../pv/popups/channels.cpp" line="69"/>
         <source>Unnamed</source>
         <translation>Unbenamte</translation>
     </message>
     <message>
-        <location filename="../pv/popups/channels.cpp" line="69"/>
+        <location filename="../pv/popups/channels.cpp" line="70"/>
         <source>Changing</source>
         <translation>Sich ändernde</translation>
     </message>
     <message>
-        <location filename="../pv/popups/channels.cpp" line="70"/>
+        <location filename="../pv/popups/channels.cpp" line="71"/>
         <source>Non-changing</source>
         <translation>Konstante</translation>
     </message>
     <message>
-        <location filename="../pv/popups/channels.cpp" line="140"/>
+        <location filename="../pv/popups/channels.cpp" line="141"/>
         <source>Disable: </source>
         <translation>Deaktivieren: </translation>
     </message>
     <message>
-        <location filename="../pv/popups/channels.cpp" line="148"/>
+        <location filename="../pv/popups/channels.cpp" line="149"/>
         <source>Enable: </source>
         <translation>Aktivieren: </translation>
     </message>
+    <message>
+        <location filename="../pv/popups/channels.cpp" line="281"/>
+        <location filename="../pv/popups/channels.cpp" line="301"/>
+        <source>None</source>
+        <translation>Keine</translation>
+    </message>
 </context>
 <context>
     <name>pv::prop::Bool</name>
@@ -1036,56 +1053,95 @@ Bei einer Änderung benötigt PulseView eventuell einen Neustart, damit alles ko
     </message>
 </context>
 <context>
-    <name>pv::views::decoder_output::View</name>
+    <name>pv::views::decoder_binary::View</name>
     <message>
-        <location filename="../pv/views/decoder_output/view.cpp" line="83"/>
+        <location filename="../pv/views/decoder_binary/view.cpp" line="83"/>
         <source>Decoder:</source>
         <translation>Dekoder:</translation>
     </message>
     <message>
-        <location filename="../pv/views/decoder_output/view.cpp" line="87"/>
+        <location filename="../pv/views/decoder_binary/view.cpp" line="87"/>
         <source>Show data as</source>
         <translation>Zeige Daten als</translation>
     </message>
     <message>
-        <location filename="../pv/views/decoder_output/view.cpp" line="93"/>
+        <location filename="../pv/views/decoder_binary/view.cpp" line="93"/>
         <source>Hexdump</source>
         <translation>Hex-Dump</translation>
     </message>
     <message>
-        <location filename="../pv/views/decoder_output/view.cpp" line="110"/>
+        <location filename="../pv/views/decoder_binary/view.cpp" line="110"/>
         <source>&amp;Save...</source>
         <translation>&amp;Speichern...</translation>
     </message>
     <message>
-        <location filename="../pv/views/decoder_output/view.cpp" line="258"/>
-        <location filename="../pv/views/decoder_output/view.cpp" line="296"/>
+        <location filename="../pv/views/decoder_binary/view.cpp" line="258"/>
+        <location filename="../pv/views/decoder_binary/view.cpp" line="298"/>
         <source>Save Binary Data</source>
         <translation>Binäre Daten speichern</translation>
     </message>
     <message>
-        <location filename="../pv/views/decoder_output/view.cpp" line="258"/>
+        <location filename="../pv/views/decoder_binary/view.cpp" line="258"/>
         <source>Binary Data Files (*.bin);;All Files (*)</source>
         <translation>Binärdateien (*.bin);;Alle Dateien (*)</translation>
     </message>
     <message>
-        <location filename="../pv/views/decoder_output/view.cpp" line="275"/>
-        <location filename="../pv/views/decoder_output/view.cpp" line="325"/>
+        <location filename="../pv/views/decoder_binary/view.cpp" line="277"/>
+        <location filename="../pv/views/decoder_binary/view.cpp" line="329"/>
         <source>Error</source>
         <translation>Fehler</translation>
     </message>
     <message>
-        <location filename="../pv/views/decoder_output/view.cpp" line="275"/>
-        <location filename="../pv/views/decoder_output/view.cpp" line="325"/>
+        <location filename="../pv/views/decoder_binary/view.cpp" line="277"/>
+        <location filename="../pv/views/decoder_binary/view.cpp" line="329"/>
         <source>File %1 could not be written to.</source>
         <translation>Konnte Datei %1 nicht speichern.</translation>
     </message>
     <message>
-        <location filename="../pv/views/decoder_output/view.cpp" line="296"/>
+        <location filename="../pv/views/decoder_binary/view.cpp" line="298"/>
         <source>Hex Dumps (*.txt);;All Files (*)</source>
         <translation>Hex-Dumps (*.txt);;Alle Dateien (*)</translation>
     </message>
 </context>
+<context>
+    <name>pv::views::decoder_output::View</name>
+    <message>
+        <source>Decoder:</source>
+        <translation type="vanished">Dekoder:</translation>
+    </message>
+    <message>
+        <source>Show data as</source>
+        <translation type="vanished">Zeige Daten als</translation>
+    </message>
+    <message>
+        <source>Hexdump</source>
+        <translation type="vanished">Hex-Dump</translation>
+    </message>
+    <message>
+        <source>&amp;Save...</source>
+        <translation type="vanished">&amp;Speichern...</translation>
+    </message>
+    <message>
+        <source>Save Binary Data</source>
+        <translation type="vanished">Binäre Daten speichern</translation>
+    </message>
+    <message>
+        <source>Binary Data Files (*.bin);;All Files (*)</source>
+        <translation type="vanished">Binärdateien (*.bin);;Alle Dateien (*)</translation>
+    </message>
+    <message>
+        <source>Error</source>
+        <translation type="vanished">Fehler</translation>
+    </message>
+    <message>
+        <source>File %1 could not be written to.</source>
+        <translation type="vanished">Konnte Datei %1 nicht speichern.</translation>
+    </message>
+    <message>
+        <source>Hex Dumps (*.txt);;All Files (*)</source>
+        <translation type="vanished">Hex-Dumps (*.txt);;Alle Dateien (*)</translation>
+    </message>
+</context>
 <context>
     <name>pv::views::trace::AnalogSignal</name>
     <message>
@@ -1177,129 +1233,157 @@ Bei einer Änderung benötigt PulseView eventuell einen Neustart, damit alles ko
         <translation>Einrasten deaktivieren</translation>
     </message>
 </context>
+<context>
+    <name>pv::views::trace::CursorPair</name>
+    <message>
+        <location filename="../pv/views/trace/cursorpair.cpp" line="128"/>
+        <source>Display interval</source>
+        <translation>Intervall anzeigen</translation>
+    </message>
+    <message>
+        <location filename="../pv/views/trace/cursorpair.cpp" line="140"/>
+        <source>Display frequency</source>
+        <translation>Frequenz anzeigen</translation>
+    </message>
+    <message>
+        <location filename="../pv/views/trace/cursorpair.cpp" line="152"/>
+        <source>Display samples</source>
+        <translation>Samples anzeigen</translation>
+    </message>
+</context>
 <context>
     <name>pv::views::trace::DecodeTrace</name>
     <message>
-        <location filename="../pv/views/trace/decodetrace.cpp" line="423"/>
+        <location filename="../pv/views/trace/decodetrace.cpp" line="448"/>
         <source>&lt;p&gt;&lt;i&gt;No decoders in the stack&lt;/i&gt;&lt;/p&gt;</source>
         <translation>&lt;p&gt;&lt;i&gt;Keine Protokolldekoder vorhanden&lt;/i&gt;&lt;/p&gt;</translation>
     </message>
     <message>
-        <location filename="../pv/views/trace/decodetrace.cpp" line="434"/>
+        <location filename="../pv/views/trace/decodetrace.cpp" line="459"/>
         <source>&lt;i&gt;* Required channels&lt;/i&gt;</source>
         <translation>&lt;i&gt;* Notwendige Kanäle&lt;/i&gt;</translation>
     </message>
     <message>
-        <location filename="../pv/views/trace/decodetrace.cpp" line="438"/>
+        <location filename="../pv/views/trace/decodetrace.cpp" line="463"/>
         <source>Stack Decoder</source>
         <translation>Protokolldekoder stapeln</translation>
     </message>
     <message>
-        <location filename="../pv/views/trace/decodetrace.cpp" line="439"/>
+        <location filename="../pv/views/trace/decodetrace.cpp" line="464"/>
         <source>Stack a higher-level decoder on top of this one</source>
         <translation>Weiteren Protokolldekoder auf diesen stapeln</translation>
     </message>
     <message>
-        <location filename="../pv/views/trace/decodetrace.cpp" line="453"/>
+        <location filename="../pv/views/trace/decodetrace.cpp" line="478"/>
         <source>Delete</source>
         <translation>Löschen</translation>
     </message>
     <message>
-        <location filename="../pv/views/trace/decodetrace.cpp" line="495"/>
+        <location filename="../pv/views/trace/decodetrace.cpp" line="520"/>
         <source>Resume decoding</source>
         <translation>Dekodierung fortsetzen</translation>
     </message>
     <message>
-        <location filename="../pv/views/trace/decodetrace.cpp" line="502"/>
+        <location filename="../pv/views/trace/decodetrace.cpp" line="527"/>
         <source>Pause decoding</source>
         <translation>Dekodierung anhalten</translation>
     </message>
     <message>
-        <location filename="../pv/views/trace/decodetrace.cpp" line="510"/>
+        <location filename="../pv/views/trace/decodetrace.cpp" line="535"/>
         <source>Copy annotation text to clipboard</source>
         <translation>Dekodierten Wert in die Zwischenablage kopieren</translation>
     </message>
     <message>
-        <location filename="../pv/views/trace/decodetrace.cpp" line="519"/>
+        <location filename="../pv/views/trace/decodetrace.cpp" line="544"/>
         <source>Export all annotations</source>
         <translation>Alle dekodierten Werte exportieren</translation>
     </message>
     <message>
-        <location filename="../pv/views/trace/decodetrace.cpp" line="526"/>
+        <location filename="../pv/views/trace/decodetrace.cpp" line="551"/>
         <source>Export all annotations for this row</source>
         <translation>Alle dekodierten Werte dieser Zeile exportieren</translation>
     </message>
     <message>
-        <location filename="../pv/views/trace/decodetrace.cpp" line="535"/>
+        <location filename="../pv/views/trace/decodetrace.cpp" line="560"/>
         <source>Export all annotations, starting here</source>
         <translation>Alle dekodierten Werte ab hier exportieren</translation>
     </message>
     <message>
-        <location filename="../pv/views/trace/decodetrace.cpp" line="542"/>
+        <location filename="../pv/views/trace/decodetrace.cpp" line="567"/>
         <source>Export annotations for this row, starting here</source>
         <translation>Alle dekodierten Werte dieser Zeile ab hier exportieren</translation>
     </message>
     <message>
-        <location filename="../pv/views/trace/decodetrace.cpp" line="551"/>
+        <location filename="../pv/views/trace/decodetrace.cpp" line="576"/>
         <source>Export all annotations within cursor range</source>
         <translation>Alle dekodierten Werte innerhalb des gewählten Bereiches exportieren</translation>
     </message>
     <message>
-        <location filename="../pv/views/trace/decodetrace.cpp" line="558"/>
+        <location filename="../pv/views/trace/decodetrace.cpp" line="583"/>
         <source>Export annotations for this row within cursor range</source>
         <translation>Alle dekodierten Werte dieser Zeile innerhalb des gewählten Bereiches exportieren</translation>
     </message>
     <message>
-        <location filename="../pv/views/trace/decodetrace.cpp" line="1071"/>
+        <location filename="../pv/views/trace/decodetrace.cpp" line="1100"/>
         <source>%1:
 %2</source>
         <translation></translation>
     </message>
     <message>
-        <location filename="../pv/views/trace/decodetrace.cpp" line="1115"/>
+        <location filename="../pv/views/trace/decodetrace.cpp" line="1144"/>
         <source>&lt;b&gt;%1&lt;/b&gt; (%2) %3</source>
         <translation></translation>
     </message>
     <message>
-        <location filename="../pv/views/trace/decodetrace.cpp" line="1185"/>
+        <location filename="../pv/views/trace/decodetrace.cpp" line="1214"/>
         <source>Export annotations</source>
         <translation>Dekodierte Werte exportieren</translation>
     </message>
     <message>
-        <location filename="../pv/views/trace/decodetrace.cpp" line="1185"/>
+        <location filename="../pv/views/trace/decodetrace.cpp" line="1214"/>
         <source>Text Files (*.txt);;All Files (*)</source>
         <translation>Textdateien (*.txt);;Alle Dateien (*)</translation>
     </message>
     <message>
-        <location filename="../pv/views/trace/decodetrace.cpp" line="1226"/>
+        <location filename="../pv/views/trace/decodetrace.cpp" line="1279"/>
         <source>Error</source>
         <translation>Fehler</translation>
     </message>
     <message>
-        <location filename="../pv/views/trace/decodetrace.cpp" line="1226"/>
+        <location filename="../pv/views/trace/decodetrace.cpp" line="1279"/>
         <source>File %1 could not be written to.</source>
         <translation>Konnte Datei %1 nicht speichern.</translation>
     </message>
     <message>
-        <location filename="../pv/views/trace/decodetrace.cpp" line="1276"/>
+        <location filename="../pv/views/trace/decodetrace.cpp" line="1332"/>
         <source>Show this row</source>
         <translation>Diese Zeile anzeigen</translation>
     </message>
+    <message>
+        <location filename="../pv/views/trace/decodetrace.cpp" line="1343"/>
+        <source>Show All</source>
+        <translation>Alle anzeigen</translation>
+    </message>
+    <message>
+        <location filename="../pv/views/trace/decodetrace.cpp" line="1351"/>
+        <source>Hide All</source>
+        <translation>Alle verstecken</translation>
+    </message>
 </context>
 <context>
     <name>pv::views::trace::Flag</name>
     <message>
-        <location filename="../pv/views/trace/flag.cpp" line="126"/>
+        <location filename="../pv/views/trace/flag.cpp" line="132"/>
         <source>Text</source>
         <translation></translation>
     </message>
     <message>
-        <location filename="../pv/views/trace/flag.cpp" line="135"/>
+        <location filename="../pv/views/trace/flag.cpp" line="141"/>
         <source>Delete</source>
         <translation>Löschen</translation>
     </message>
     <message>
-        <location filename="../pv/views/trace/flag.cpp" line="140"/>
+        <location filename="../pv/views/trace/flag.cpp" line="146"/>
         <source>Disable snapping</source>
         <translation>Einrasten deaktivieren</translation>
     </message>
@@ -1373,12 +1457,17 @@ Bei einer Änderung benötigt PulseView eventuell einen Neustart, damit alles ko
         <translation>Als Nullpunkt setzen</translation>
     </message>
     <message>
-        <location filename="../pv/views/trace/ruler.cpp" line="169"/>
+        <location filename="../pv/views/trace/ruler.cpp" line="162"/>
+        <source>Reset zero point</source>
+        <translation>Nullpunkt zurücksetzen</translation>
+    </message>
+    <message>
+        <location filename="../pv/views/trace/ruler.cpp" line="175"/>
         <source>Disable mouse hover marker</source>
         <translation>Mauszeigerbalken deaktivieren</translation>
     </message>
     <message>
-        <location filename="../pv/views/trace/ruler.cpp" line="169"/>
+        <location filename="../pv/views/trace/ruler.cpp" line="175"/>
         <source>Enable mouse hover marker</source>
         <translation>Mauszeigerbalken aktivieren</translation>
     </message>
@@ -1437,7 +1526,7 @@ Bei einer Änderung benötigt PulseView eventuell einen Neustart, damit alles ko
 <context>
     <name>pv::views::trace::TimeMarker</name>
     <message>
-        <location filename="../pv/views/trace/timemarker.cpp" line="186"/>
+        <location filename="../pv/views/trace/timemarker.cpp" line="191"/>
         <source>Time</source>
         <translation>Zeit</translation>
     </message>