DecodeSignal: Support unitsize > 1 for logic output

[pulseview.git] / pv / widgets / wellarray.cpp

/****************************************************************************
**
** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
** Contact: http://www.qt-project.org/legal
**
** This file is part of the QtGui module of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:LGPL$
** Commercial License Usage
** Licensees holding valid commercial Qt licenses may use this file in
** accordance with the commercial license agreement provided with the
** Software or, alternatively, in accordance with the terms contained in
** a written agreement between you and Digia.  For licensing terms and
** conditions see http://qt.digia.com/licensing.  For further information
** use the contact form at http://qt.digia.com/contact-us.
**
** GNU Lesser General Public License Usage
** Alternatively, this file may be used under the terms of the GNU Lesser
** General Public License version 2.1 as published by the Free Software
** Foundation and appearing in the file LICENSE.LGPL included in the
** packaging of this file.  Please review the following information to
** ensure the GNU Lesser General Public License version 2.1 requirements
** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
**
** In addition, as a special exception, Digia gives you certain additional
** rights.  These rights are described in the Digia Qt LGPL Exception
** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
**
** GNU General Public License Usage
** Alternatively, this file may be used under the terms of the GNU
** General Public License version 3.0 as published by the Free Software
** Foundation and appearing in the file LICENSE.GPL included in the
** packaging of this file.  Please review the following information to
** ensure the GNU General Public License version 3.0 requirements will be
** met: http://www.gnu.org/copyleft/gpl.html.
**
**
** $QT_END_LICENSE$
**
****************************************************************************/

#include <QPaintEvent>
#include <QPainter>
#include <QStyle>
#include <QStyleOptionFrame>

#include "wellarray.hpp"

namespace pv {
namespace widgets {

void WellArray::paintEvent(QPaintEvent *event)
{
    QRect r = event->rect();
    int cx = r.x();
    int cy = r.y();
    int ch = r.height();
    int cw = r.width();
    int colfirst = columnAt(cx);
    int collast = columnAt(cx + cw);
    int rowfirst = rowAt(cy);
    int rowlast = rowAt(cy + ch);

    if (isRightToLeft()) {
        int t = colfirst;
        colfirst = collast;
        collast = t;
    }

    QPainter painter(this);
    QPainter *p = &painter;
    QRect rect(0, 0, cellWidth(), cellHeight());


    if (collast < 0 || collast >= ncols)
        collast = ncols-1;
    if (rowlast < 0 || rowlast >= nrows)
        rowlast = nrows-1;

    // Go through the rows
    for (int r = rowfirst; r <= rowlast; ++r) {
        // get row position and height
        int rowp = rowY(r);

        // Go through the columns in the row r
        // if we know from where to where, go through [colfirst, collast],
        // else go through all of them
        for (int c = colfirst; c <= collast; ++c) {
            // get position and width of column c
            int colp = columnX(c);
            // Translate painter and draw the cell
            rect.translate(colp, rowp);
            paintCell(p, r, c, rect);
            rect.translate(-colp, -rowp);
        }
    }
}

struct WellArrayData {
    QBrush *brush;
};

WellArray::WellArray(int rows, int cols, QWidget *parent)
    : QWidget(parent)
        ,nrows(rows), ncols(cols)
{
    d = nullptr;
    setFocusPolicy(Qt::StrongFocus);
    cellw = 28;
    cellh = 24;
    curCol = 0;
    curRow = 0;
    selCol = -1;
    selRow = -1;
}

QSize WellArray::sizeHint() const
{
    ensurePolished();
    return gridSize().boundedTo(QSize(640, 480));
}


void WellArray::paintCell(QPainter* p, int row, int col, const QRect &rect)
{
    int b = 3; //margin

    const QPalette& g = palette();
    QStyleOptionFrame opt;
    int dfw = style()->pixelMetric(QStyle::PM_DefaultFrameWidth);
    opt.lineWidth = dfw;
    opt.midLineWidth = 1;
    opt.rect = rect.adjusted(b, b, -b, -b);
    opt.palette = g;
    opt.state = QStyle::State_Enabled | QStyle::State_Sunken;
    style()->drawPrimitive(QStyle::PE_Frame, &opt, p, this);
    b += dfw;

    if ((row == curRow) && (col == curCol)) {
        if (hasFocus()) {
            QStyleOptionFocusRect opt;
            opt.palette = g;
            opt.rect = rect;
            opt.state = QStyle::State_None | QStyle::State_KeyboardFocusChange;
            style()->drawPrimitive(QStyle::PE_FrameFocusRect, &opt, p, this);
        }
    }
    paintCellContents(p, row, col, opt.rect.adjusted(dfw, dfw, -dfw, -dfw));
}

/*!
  Reimplement this function to change the contents of the well array.
 */
void WellArray::paintCellContents(QPainter *p, int row, int col, const QRect &r)
{
    if (d) {
        p->fillRect(r, d->brush[row*numCols()+col]);
    } else {
        p->fillRect(r, Qt::white);
        p->setPen(Qt::black);
        p->drawLine(r.topLeft(), r.bottomRight());
        p->drawLine(r.topRight(), r.bottomLeft());
    }
}

void WellArray::mousePressEvent(QMouseEvent *event)
{
    // The current cell marker is set to the cell the mouse is pressed in
    QPoint pos = event->pos();
    setCurrent(rowAt(pos.y()), columnAt(pos.x()));
}

void WellArray::mouseReleaseEvent(QMouseEvent * /* event */)
{
    // The current cell marker is set to the cell the mouse is clicked in
    setSelected(curRow, curCol);
}


/*
  Sets the cell currently having the focus. This is not necessarily
  the same as the currently selected cell.
*/

void WellArray::setCurrent(int row, int col)
{
    if ((curRow == row) && (curCol == col))
        return;

    if (row < 0 || col < 0)
        row = col = -1;

    int oldRow = curRow;
    int oldCol = curCol;

    curRow = row;
    curCol = col;

    updateCell(oldRow, oldCol);
    updateCell(curRow, curCol);
}

/*
  Sets the currently selected cell to \a row, \a column. If \a row or
  \a column are less than zero, the current cell is unselected.

  Does not set the position of the focus indicator.
*/
void WellArray::setSelected(int row, int col)
{
    int oldRow = selRow;
    int oldCol = selCol;

    if (row < 0 || col < 0)
        row = col = -1;

    selCol = col;
    selRow = row;

    updateCell(oldRow, oldCol);
    updateCell(selRow, selCol);
    if (row >= 0)
        selected(row, col);
}

void WellArray::focusInEvent(QFocusEvent*)
{
    updateCell(curRow, curCol);
}

void WellArray::setCellBrush(int row, int col, const QBrush &b)
{
    if (!d) {
        d = new WellArrayData;
        int i = numRows()*numCols();
        d->brush = new QBrush[i];
    }
    if (row >= 0 && row < numRows() && col >= 0 && col < numCols())
        d->brush[row*numCols()+col] = b;
}

/*
  Returns the brush set for the cell at \a row, \a column. If no brush is
  set, Qt::NoBrush is returned.
*/

QBrush WellArray::cellBrush(int row, int col)
{
    if (d && row >= 0 && row < numRows() && col >= 0 && col < numCols())
        return d->brush[row*numCols()+col];
    return Qt::NoBrush;
}


/*!\reimp
*/

void WellArray::focusOutEvent(QFocusEvent*)
{
    updateCell(curRow, curCol);
}

/*\reimp
*/
void WellArray::keyPressEvent(QKeyEvent* event)
{
    switch (event->key()) {                        // Look at the key code
    case Qt::Key_Left:                                // If 'left arrow'-key,
        if (curCol > 0)                        // and cr't not in leftmost col
            setCurrent(curRow, curCol - 1);        // set cr't to next left column
        break;
    case Qt::Key_Right:                                // Correspondingly...
        if (curCol < numCols()-1)
            setCurrent(curRow, curCol + 1);
        break;
    case Qt::Key_Up:
        if (curRow > 0)
            setCurrent(curRow - 1, curCol);
        break;
    case Qt::Key_Down:
        if (curRow < numRows()-1)
            setCurrent(curRow + 1, curCol);
        break;
    case Qt::Key_Space:
        setSelected(curRow, curCol);
        break;
    default:                                // If not an interesting key,
        event->ignore();                        // we don't accept the event
        return;
    }

}

}  // namespace widgets
} // namespace pv