Noname LHT00SU1

From sigrok
Jump to navigation Jump to search
Noname LHT00SU1
Noname lht00su1 mugshot.png
Status supported
Source code fx2lafw
Channels 8 + 1
Samplerate 8ch @ 24MHz, 8+1ch @ 12MHz
Samplerate (state)
Triggers none (SW-only)
Min/max voltage Digital: 0V — +5.3V
Analog: ±10V
Threshold voltage Fixed: VIH=1.4V, VIL=0.8V
Memory none
Compression none
Price range $20 - $25

The Noname LHT00SU1 is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, with 1 additional analog channel (theoretically 2, but only one of them can be used at a time; 3MHz analog bandwidth).

It is a clone of the CWAV USBee AX-Pro.

In sigrok, we use the open-source fx2lafw firmware for this logic analyzer.

Note: fx2lafw currently doesn't support switching between the two possible analog channels, 1ACH will be used unconditionally.

See Noname LHT00SU1/Info for some more details (such as lsusb -v output) on the device.


There's a jumper on the PCB which write-protects the I²C EEPROM when set (it ships in that state) by keeping the WP pin at 3.3V.






Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.