Agilent 34401A
Jump to navigation
Jump to search
| Status | supported |
|---|---|
| Source code | scpi-dmm |
| IEC 61010-1 | CAT II (300V) |
| Connectivity | GPIB, RS232 |
| Measurements | voltage, current, 2- and 4-wire resistance, diode, continuity, frequency, period |
| Features | autorange, true RMS, data hold, relative |
| Website | keysight.com |
The HP 34401A / Agilent 34401A is a 6.5 digits CAT II (300V) bench multimeter.
Photos
Example use
Depending on your type of connection you have to can either use the RS232 connection parameter or the GPIB connection parameter. Examples:
--driver=scpi-dmm:conn=/dev/ttyUSB0
or
--driver=scpi-dmm:conn=libgpib/hp34401a
Check the capabilities of the meter's driver, and current state of settings:
$ sigrok-cli -d scpi-dmm:conn=/dev/ttyUSB0 --show
Get or set the meter's current function:
$ sigrok-cli -d scpi-dmm:conn=/dev/ttyUSB0 --get measured_quantity $ sigrok-cli -d scpi-dmm:conn=/dev/ttyUSB0 -c measured_quantity=voltage/dc --set
Acquire measurement data, in the current mode or in another specified mode:
$ sigrok-cli -d scpi-dmm:conn=/dev/ttyUSB0 --continuous $ sigrok-cli -d scpi-dmm:conn=/dev/ttyUSB0 --time 10s $ sigrok-cli -d scpi-dmm:conn=/dev/ttyUSB0 --samples 10 -c measured_quantity=current/dc