Difference between revisions of "YiXingDianZi MDSO"

From sigrok
Jump to navigation Jump to search
(FX2 pins to analog switches)
(YiXingDianZi MDSO is now supported.)
 
(6 intermediate revisions by 2 users not shown)
Line 2: Line 2:
| image              = [[File:YiXingDianZi-MDSO.png|180px]]
| image              = [[File:YiXingDianZi-MDSO.png|180px]]
| name                = YiXingDianZi MDSO
| name                = YiXingDianZi MDSO
| status              = in progress
| status              = supported
| source_code_dir    =  
| source_code_dir    = hantek-6xxx
| channels            = 2
| channels            = 2
| samplerate          = 48MHz
| samplerate          = 48MHz
Line 18: Line 18:
}}
}}


The '''YiXingDianZi MDSO''' is a USB-based, 2-channel oscilloscope with an analog bandwidth of 20MS/s and 48MS/s sampling rate.
The '''YiXingDianZi MDSO''' (also known as '''Wosontel MDSO''') is a USB-based, 2-channel oscilloscope with an analog bandwidth of 20MS/s and 48MS/s sampling rate.


It comes in very compact plastic case (82x65x23mm) without any branding. It has:
It comes in very compact plastic case (82x65x23mm) without any branding, USB type B input, 2c BNC inputs, and a red LED.
* usb type B input
* 2c BNC inputs
* red led


See [[YiXingDianZi MDSO/Info]] for more details (such as '''lsusb -v''' output) on the device.  
The YiXingDianZi manufacturer is probably the same as Instrustar (Chinese characters match, lsusb is almost exactly the same).
 
See [[YiXingDianZi MDSO/Info]] for more details (such as '''lsusb -v''' output) on the device.


== Hardware ==
== Hardware ==
Line 32: Line 31:
* ADC: Analog Devices AD9288
* ADC: Analog Devices AD9288
* EEPROM: Microchip 24LC64I (64K I²C EEPROM)
* EEPROM: Microchip 24LC64I (64K I²C EEPROM)
* 2x ST 74HC4051 (8-Channel Analog Mux)
* 2x ST 74HC4051 (8-Channel analog mux)
* Crystal oscillator 24MHz (crystal)
* Crystal oscillator 24MHz (crystal)
* 4x 145 MHz FastFET Op Amp: Analog Devices AD8065 (top markings HRA)
* 4x 145 MHz FastFET op amp: Analog Devices AD8065 (top markings HRA)
* unmarked DC/DC converter
* Unmarked DC/DC converter
* 3.3V LDO: AMS1117-3.3
* 3.3V LDO: AMS1117-3.3


Line 42: Line 41:
<small>
<small>
{{chip_56pin
{{chip_56pin
| 1=<span style="color:cyan">(AD9288 D5B)</span> PD5
| 1=<span style="color:green">(AD9288 D5B)</span> PD5
| 2=<span style="color:cyan">(AD9288 D6B)</span> PD6
| 2=<span style="color:green">(AD9288 D6B)</span> PD6
| 3=<span style="color:cyan">(AD9288 D7B)</span> PD7
| 3=<span style="color:green">(AD9288 D7B)</span> PD7
| 4=GND
| 4=GND
| 5=CLKOUT
| 5=CLKOUT
Line 62: Line 61:
| 18=VCC
| 18=VCC
| 19=GND
| 19=GND
| 20=<span style="color:lime">(CTL0, AD9288 ENCA/B)</span> *IFCLK
| 20=<span style="color:navy">(FX2 CTL0)</span> <span style="color:green">(AD9288 ENCA/B)</span> *IFCLK
| 21=RESERVED
| 21=RESERVED
| 22=<span style="color:purple">(EEPROM SCL)</span> SCL
| 22=<span style="color:purple">(EEPROM SCL)</span> SCL
| 23=<span style="color:purple">(EEPROM SDA)</span> SDA
| 23=<span style="color:purple">(EEPROM SDA)</span> SDA
| 24=VCC
| 24=VCC
| 25=<span style="color:cyan">(AD9288 D0A)</span> PB0
| 25=<span style="color:green">(AD9288 D0A)</span> PB0
| 26=<span style="color:cyan">(AD9288 D1A)</span> PB1
| 26=<span style="color:green">(AD9288 D1A)</span> PB1
| 27=<span style="color:cyan">(AD9288 D2A)</span> PB2
| 27=<span style="color:green">(AD9288 D2A)</span> PB2
| 28=<span style="color:cyan">(AD9288 D3A)</span> PB3
| 28=<span style="color:green">(AD9288 D3A)</span> PB3


| 29=PB4 <span style="color:cyan">(AD9288 D4A)</span>
| 29=PB4 <span style="color:green">(AD9288 D4A)</span>
| 30=PB5 <span style="color:cyan">(AD9288 D5A)</span>
| 30=PB5 <span style="color:green">(AD9288 D5A)</span>
| 31=PB6 <span style="color:cyan">(AD9288 D6A)</span>
| 31=PB6 <span style="color:green">(AD9288 D6A)</span>
| 32=PB7 <span style="color:cyan">(AD9288 D7A)</span>
| 32=PB7 <span style="color:green">(AD9288 D7A)</span>
| 33=GND
| 33=GND
| 34=VCC
| 34=VCC
| 35=GND
| 35=GND
| 36=CTL0 <span style="color:lime">(IFCLK, AD9288 ENCA/B)</span>
| 36=CTL0 <span style="color:green">(AD9288 ENCA/B)</span> <span style="color:navy">(FX2 IFCLK)</span>
| 37=CTL1
| 37=CTL1
| 38=CTL2
| 38=CTL2
Line 96: Line 95:
| 50=VCC
| 50=VCC
| 51=*WAKEUP
| 51=*WAKEUP
| 52=PD0 <span style="color:cyan">(AD9288 D0B)</span>
| 52=PD0 <span style="color:green">(AD9288 D0B)</span>
| 53=PD1 <span style="color:cyan">(AD9288 D1B)</span>
| 53=PD1 <span style="color:green">(AD9288 D1B)</span>
| 54=PD2 <span style="color:cyan">(AD9288 D2B)</span>
| 54=PD2 <span style="color:green">(AD9288 D2B)</span>
| 55=PD3 <span style="color:cyan">(AD9288 D3B)</span>
| 55=PD3 <span style="color:green">(AD9288 D3B)</span>
| 56=PD4 <span style="color:cyan">(AD9288 D4B)</span>
| 56=PD4 <span style="color:green">(AD9288 D4B)</span>


}}
}}
Line 148: Line 147:
</td></tr></table>
</td></tr></table>
</small>
</small>
'''Input stage gain''':
{| border="0" style="font-size: smaller" class="alternategrey sortable sigroktable"
|-
!S2
!S1
!S0
!74HC4051D Mux
!Gain
!VDIVs
|-
| 0 || 0 || 0 || Y0 to Z (3.9k) || 5 (4.9 in fact) || 200mV
|-
| 0 || 0 || 1 || Y1 to Z (1k) || 2 || 500mV
|-
| 0 || 1 || 0 || Y2 to Z (0) || 1 || 1V
|-
| 0 || 1 || 1 || Y3 to Z (15k) || 16 || 62.5mV
|}


'''Microchip 24LC64I pinout''':
'''Microchip 24LC64I pinout''':
Line 223: Line 240:
| All-0xff.
| All-0xff.
|}
|}
See full dump of FX2 boot communication with EEPROM: [[Media:YiXingDianZi MDSO eeprom read.sr.gz]]


== Photos ==
== Photos ==


<gallery>
<gallery>
File:YiXingDianZi-MDSO-outside.jpg|Outside
File:YiXingDianZi-MDSO-box.jpg|<small>Packaging</small>
File:YiXingDianZi-MDSO-inside.jpg|Inside
File:YiXingDianZi-MDSO-outside.jpg|<small>Device, top</small>
File:YiXingDianZi-MDSO-pcb-top.jpg|PCB top side
File:YiXingDianZi-MDSO-inside.jpg|<small>Inside</small>
File:YiXingDianZi-MDSO-bottom.jpg|PCB bottom side
File:YiXingDianZi-MDSO-pcb-top.jpg|<small>PCB, top</small>
File:YiXingDianZi-MDSO-usb-side.jpg|PCB, usb side
File:YiXingDianZi-MDSO-bottom.jpg|<small>PCB, bottom</small>
File:YiXingDianZi-MDSO-frontend.jpg|PCB, analog frontend
File:YiXingDianZi-MDSO-usb-side.jpg|<small>PCB, USB side</small>
File:YiXingDianZi-MDSO-box.jpg|Packaging
File:YiXingDianZi-MDSO-frontend.jpg|<small>PCB, analog frontend</small>
</gallery>
</gallery>


Line 244: Line 259:
[[Category:Device]]
[[Category:Device]]
[[Category:Oscilloscope]]
[[Category:Oscilloscope]]
[[Category:In progress]]
[[Category:Supported]]

Latest revision as of 15:01, 28 December 2018

YiXingDianZi MDSO
YiXingDianZi-MDSO.png
Status supported
Source code hantek-6xxx
Channels 2
Samplerate 48MHz
Analog bandwidth 20MHz
Vertical resolution 8bit
Triggers none (SW-only)
Input impedance 1MΩ‖25pF
Memory none
Display none
Connectivity USB

The YiXingDianZi MDSO (also known as Wosontel MDSO) is a USB-based, 2-channel oscilloscope with an analog bandwidth of 20MS/s and 48MS/s sampling rate.

It comes in very compact plastic case (82x65x23mm) without any branding, USB type B input, 2c BNC inputs, and a red LED.

The YiXingDianZi manufacturer is probably the same as Instrustar (Chinese characters match, lsusb is almost exactly the same).

See YiXingDianZi MDSO/Info for more details (such as lsusb -v output) on the device.

Hardware

  • Cypress FX2LP CY7C68013A-56PVXC (USB 2.0 HS controller)
  • ADC: Analog Devices AD9288
  • EEPROM: Microchip 24LC64I (64K I²C EEPROM)
  • 2x ST 74HC4051 (8-Channel analog mux)
  • Crystal oscillator 24MHz (crystal)
  • 4x 145 MHz FastFET op amp: Analog Devices AD8065 (top markings HRA)
  • Unmarked DC/DC converter
  • 3.3V LDO: AMS1117-3.3

Cypress FX2 pinout:

(AD9288 D5B) PD5 1-   O -56 PD4 (AD9288 D4B)
(AD9288 D6B) PD6 2- -55 PD3 (AD9288 D3B)
(AD9288 D7B) PD7 3- -54 PD2 (AD9288 D2B)
GND 4- -53 PD1 (AD9288 D1B)
CLKOUT 5- -52 PD0 (AD9288 D0B)
VCC 6- -51 *WAKEUP
GND 7- -50 VCC
RDY0/*SLRD 8- -49 RESET#
RDY1/*SLWR 9- -48 GND
AVCC 10- -47 PA7
(24MHz crystal) XTALOUT 11- -46 PA6 (CH2 74HC4051 S2)
(24MHz crystal) XTALIN 12- -45 PA5 (CH2 74HC4051 S1)
AGND 13- -44 PA4 (CH2 74HC4051 S0)
AVCC 14- -43 PA3 (CH1 74HC4051 S2)
(USB D+) DPLUS 15- -42 PA2 (CH1 74HC4051 S1)
(USB D-) DMINUS 16- -41 PA1 (CH1 74HC4051 S0)
AGND 17- -40 PA0
VCC 18- -39 VCC
GND 19- -38 CTL2
(FX2 CTL0) (AD9288 ENCA/B) *IFCLK 20- -37 CTL1
RESERVED 21- -36 CTL0 (AD9288 ENCA/B) (FX2 IFCLK)
(EEPROM SCL) SCL 22- -35 GND
(EEPROM SDA) SDA 23- -34 VCC
VCC 24- -33 GND
(AD9288 D0A) PB0 25- -32 PB7 (AD9288 D7A)
(AD9288 D1A) PB1 26- -31 PB6 (AD9288 D6A)
(AD9288 D2A) PB2 27- -30 PB5 (AD9288 D5A)
(AD9288 D3A) PB3 28- -29 PB4 (AD9288 D4A)

ST 74HC4051 (upper/lower, CH1/CH2) pinout:

CH1 (U13)CH2 (U10)
Y4 1-   O -16 VCC
Y6 2- -15 Y2 (AD8065 out)
(AD8065 -in, via 1k to GND) Z 3- -14 Y1 (AD8065 out via 1k)
Y7 4- -13 Y0 (AD8065 out via 3.9k)
Y5 5- -12 Y3 (AD8065 out via 15k)
(GND) E# 6- -11 S0 (FX2 PA1)
VEE 7- -10 S1 (FX2 PA2)
GND 8- -9 S2 (FX2 PA3)
Y4 1-   O -16 VCC
Y6 2- -15 Y2 (AD8065 out)
(AD8065 -in, via 1k to GND) Z 3- -14 Y1 (AD8065 out via 1k)
Y7 4- -13 Y0 (AD8065 out via 3.9k)
Y5 5- -12 Y3 (AD8065 out via 15k)
(GND) E# 6- -11 S0 (FX2 PA4)
VEE 7- -10 S1 (FX2 PA5)
GND 8- -9 S2 (FX2 PA6)

Input stage gain:

S2 S1 S0 74HC4051D Mux Gain VDIVs
0 0 0 Y0 to Z (3.9k) 5 (4.9 in fact) 200mV
0 0 1 Y1 to Z (1k) 2 500mV
0 1 0 Y2 to Z (0) 1 1V
0 1 1 Y3 to Z (15k) 16 62.5mV

Microchip 24LC64I pinout:

(VCC) A0 1-   O -8 VCC
(GND) A1 2- -7 WP (GND)
(GND) A2 3- -6 SCL (FX2 SCL)
VSS 4- -5 SDA (FX2 SDA)

Analog Devices AD9288 pinout:

AD9288 pins Description
S1, S2 S1=VCC, S2=GND. "Normal operation, data align disabled".
DFS Tied to GND. Data format select = "offset binary" (not "twos complement").
AINA, AINB Analog input channels.
D0A-D7A Connected to FX2 PB0-PB7.
D0B-D7B Connected to FX2 PD0-PD7.

Firmware

Note: The firmware is flashed into the device permanently.

EEPROM layout

The device has a 8KB I²C EEPROM with the following layout: 

c2 47 05 31 21 00 00 04 XX XX XX XX XX XX .. ..

Description:

Bytes Description
0 0xc2: FX2 "c2 load" mode, i.e. VID/PID/DID are loaded from EEPROM as the firmware.
1-2 0x0547: USB vendor ID (VID before firmware renumerate).
3-4 0x2131: USB product ID (PID before firmware renumerate).
5-6 0x0000: USB device ID (DID before firmware renumerate).
7 0x04: FX2 configuration byte (see FX2 TRM for details).
8-1917h Firmware.
1918h -1fffh All-0xff.

Photos

  • Packaging

  • Device, top

  • Inside

  • PCB, top

  • PCB, bottom

  • PCB, USB side

  • PCB, analog frontend

Resources

Retrieved from "https://sigrok.org/w/index.php?title=YiXingDianZi_MDSO&oldid=13986"