XZL_Studio DX

From sigrok
Revision as of 10:33, 18 March 2013 by Uwe Hermann (talk | contribs)
Jump to: navigation, search
XZL_Studio DX
Status planned
Source code fx2lafw
Channels 8/16
Samplerate 24MHz
Samplerate (state)
Triggers none (SW-only)
Min/max voltage ?
Memory none
Compression none
Website hotmcu.com

The XZL_Studio DX is a USB-based, 16-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.

It is a clone of the CWAV USBee DX.

See XZL_Studio DX/Info for some more details (such as lsusb -vvv output) on the device.

Note: Due to the fact that this device has two FX2 chips behind a USB hub inside, this will need extra code to enumerate correctly in sigrok. Do you have this device? Let us know!


  • Main chip: 2x Cypress CY7C68013A-56PVXC (FX2LP)
  • ADC: 2x Texas Instruments TLC5510 (SO 24pin package)
  • I2C EEPROM: Atmel ATML H136 24C02C M Y, place for second EEPROM chip.
  • USB 2.0 Hub: SMSC USB2512A (QFN 36-pin package)
  • Low-dropout voltage regulator: Advanced Monolithic Systems AMS1117-3.3
  • Crystal: 24MHz
  • ...




Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.