Difference between revisions of "WayEngineer Saleae16"
Jump to navigation
Jump to search
Uwe Hermann (talk | contribs) (Created page with "{{Infobox logic analyzer | image = 180px | name = WayEngineer Saleae16 | status = supported | source_code_di...") |
Uwe Hermann (talk | contribs) m |
||
| Line 9: | Line 9: | ||
| triggers = none (SW-only) | | triggers = none (SW-only) | ||
| voltages = -0.9V — 6V | | voltages = -0.9V — 6V | ||
| threshold = configurable:<br />for 1.8V to 3.6V systems: | | threshold = configurable:<br />for 1.8V to 3.6V systems: V<sub>IH</sub>=1.4V, V<sub>IL</sub>=0.7V<br />for 5V systems: V<sub>IH</sub>=3.6V, V<sub>IL</sub>=1.4V | ||
| memory = none | | memory = none | ||
| compression = yes | | compression = yes | ||
Revision as of 18:21, 22 September 2013
 | |
| Status | supported |
|---|---|
| Source code | saleae-logic16 |
| Channels | 3/6/9/16 |
| Samplerate | 100/50/32/16MHz |
| Samplerate (state) | — |
| Triggers | none (SW-only) |
| Min/max voltage | -0.9V — 6V |
| Threshold voltage |
configurable: for 1.8V to 3.6V systems: VIH=1.4V, VIL=0.7V for 5V systems: VIH=3.6V, VIL=1.4V |
| Memory | none |
| Compression | yes |
| Website | wayengineer.com |
The WayEngineer Saleae16 is a USB-based, 16-channel logic analyzer with 100/50/32/16MHz sampling rate (at 3/6/9/16 enabled channels).
This is a clone of the Saleae Logic16.
See WayEngineer Saleae16/Info for more details (such as lsusb -vvv output) about the device.
Hardware
- FPGA: ?
- USB interface chip: Cypress FX2LP
- I2C EEPROM: Atmel 24C02N (markings: "ATMEL142 24C02N SU27 D")
- 3.3V voltage regulator: Advanced Monolithic Systems AMS1117-3.3 (datasheet, older datasheet)
- 1.2V voltage regulator: Advanced Monolithic Systems AMS1117-1.2 (datasheet, older datasheet)
- Crystal: 24.000
Photos
TODO.